Hey guys need some help. I updated my note 2 i317m to 4.3 after install was done. Phone booted everything worked except no phone or data signal, wifi works. When I went into network setting message came up no sim access in network. I was on ditto rom before working fine. I went back to 4.1.1 and same thing loaded fine but no phone signal only wifi. I also notice In about phone imei says unknown network unknown baseband version unknown. I tried installing without sim but same thing. Can anyone else plsssss.
Sent from my SM-T210/SM-T210R using xda app-developers app
1mile said:
Hey guys need some help. I updated my note 2 i317m to 4.3 after install was done. Phone booted everything worked except no phone or data signal, wifi works. When I went into network setting message came up no sim access in network. I was on ditto rom before working fine. I went back to 4.1.1 and same thing loaded fine but no phone signal only wifi. I also notice In about phone imei says unknown network unknown baseband version unknown. I tried installing without sim but same thing. Can anyone else plsssss.
Sent from my SM-T210/SM-T210R using xda app-developers app
Click to expand...
Click to collapse
You need to set the SE LINUX to permissive. It can be done in either x posed settings with Wanam or with the SE LINUX CHANGER app from the play store. Both require root.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
See the screen shots below.
Either way works
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I'll give it a try let u know the outcome soon
Sent from my SM-T210/SM-T210R using xda app-developers app
Hey shrekopher,
is it avaliable for 4.1.1. Playstore says its not. Should I update to 4.1.2 or 4.3?
ShrekOpher said:
See the screen shots below.
Either way works
View attachment 2493029
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Sent from my SM-T210/SM-T210R using xda app-developers app
1mile said:
Hey shrekopher,
is it avaliable for 4.1.1. Playstore says its not. Should I update to 4.1.2 or 4.3?
Sent from my SM-T210/SM-T210R using xda app-developers app
Click to expand...
Click to collapse
SELINUX is new for 4.3 only
Well installed 4.3 again. The used the root 4.3 to get root access. Installed x posed. Checked the 3 options that are required rebooted. Still same thing
Sent from my SM-T210/SM-T210R using xda app-developers app
1mile said:
Well installed 4.3 again. The used the root 4.3 to get root access. Installed x posed. Checked the 3 options that are required rebooted. Still same thing
Sent from my SM-T210/SM-T210R using xda app-developers app
Click to expand...
Click to collapse
Go into your phone and check the "About Device" > Status section. Se if anything is under the baseband and IMEI.
It may have gotten deleted when you went to 4.3. We can fix it if it has.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
---------- Post added at 09:15 PM ---------- Previous post was at 09:01 PM ----------
ShrekOpher said:
Go into your phone and check the "About Device" > Status section. Se if anything is under the baseband and IMEI.
It may have gotten deleted when you went to 4.3. We can fix it if it has.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
If you want you can get to 4.3 with working signal below. The first one will update you to 4.3 android and 4.3 bootloader w/ knox. The second will get you root back. (It will trip knox but that's no big deal) once you have root back download ROM manager and install CWM. Then I recommend flashing JediMasterX 2 as your rom. But that is more preference, their are a lot of good roms.
One click Odin AT&T 4.3 update Note2 -> http://forum.xda-developers.com/showthread.php?t=2496292 direct download link https://mega.co.nz/#!alo3HAZC!L8nSwjeElTwJP2hTcsWQu2cjh8hQCpuNaccpX2__ph4
youtube video with instructions https://www.youtube.com/watch?v=zwUdd_SkzSQ
CF Auto Root -> http://forum.xda-developers.com/showthread.php?t=1980644
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
1mile said:
Well installed 4.3 again. The used the root 4.3 to get root access. Installed x posed. Checked the 3 options that are required rebooted. Still same thing
Sent from my SM-T210/SM-T210R using xda app-developers app
Click to expand...
Click to collapse
Who is your carrier?
How did you update to 4.3 originally? You stated you updated to 4.3 and lost signal/data......
Im with rogers. I updated through odin. 3.07.
Sent from my SM-T210/SM-T210R using xda app-developers app
ShrekOpher said:
Go into your phone and check the "About Device" > Status section. Se if anything is under the baseband and IMEI.
It may have gotten deleted when you went to 4.3. We can fix it if it has.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
---------- Post added at 09:15 PM ---------- Previous post was at 09:01 PM ----------
If you want you can get to 4.3 with working signal below. The first one will update you to 4.3 android and 4.3 bootloader w/ knox. The second will get you root back. (It will trip knox but that's no big deal) once you have root back download ROM manager and install CWM. Then I recommend flashing JediMasterX 2 as your rom. But that is more preference, their are a lot of good roms.
One click Odin AT&T 4.3 update Note2 -> http://forum.xda-developers.com/showthread.php?t=2496292 direct download link https://mega.co.nz/#!alo3HAZC!L8nSwjeElTwJP2hTcsWQu2cjh8hQCpuNaccpX2__ph4
youtube video with instructions https://www.youtube.com/watch?v=zwUdd_SkzSQ
CF Auto Root -> http://forum.xda-developers.com/showthread.php?t=1980644
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
****I updated the above post with the direct download links and the youtube instructional video****
Related
Hey guys. I copied the OTA from the cache folder and put the file up on my dropbox.
https://dl.dropboxusercontent.com/u/22628158/Android/Note%202%20-%20SPHL900/493c9176987a.update_SPH-L900_MA7_to_MC2.zip
Already there.
http://forum.xda-developers.com/showthread.php?t=2240961
Not really the same thing. This is for people who just want to update their completely stock phones.
Well after trying several times I gave it another shot. On my rooted stock rom running ma7 I installed twrp over my stock recovery, then I tried the all in one zip. Worked the first time. Don't know why it failed all other times. Thanks to everyone. First time using twrp and I really like it. Wish I had tried it long time ago. So easy to use.
Sent from my Amazing Galaxy Note 2!
yankees45us said:
Well after trying several times I gave it another shot. On my rooted stock rom running ma7 I installed twrp over my stock recovery, then I tried the all in one zip. Worked the first time. Don't know why it failed all other times. Thanks to everyone. First time using twrp and I really like it. Wish I had tried it long time ago. So easy to use.
Sent from my Amazing Galaxy Note 2!
Click to expand...
Click to collapse
Can you post a screenshot of your baseband and build number? I did the same thing and I want to confirm with someone else if the flash worked correctly.
My baseband is MC2 but my build is still MA7. Is this correct?
joelm84 said:
Can you post a screenshot of your baseband and build number? I did the same thing and I want to confirm with someone else if the flash worked correctly.
My baseband is MC2 but my build is still MA7. Is this correct?
Click to expand...
Click to collapse
Same here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Amazing Galaxy Note 2!
joelm84 said:
Can you post a screenshot of your baseband and build number? I did the same thing and I want to confirm with someone else if the flash worked correctly.
My baseband is MC2 but my build is still MA7. Is this correct?
Click to expand...
Click to collapse
Yes, just the modem and a home screen security fix in this update. Build stays the same.
ArtooDetoo said:
Yes, just the modem and a home screen security fix in this update. Build stays the same.
Click to expand...
Click to collapse
Since the build stayed the same is that the reason why the binary count didn't matter on this update?
Sent from my Amazing Galaxy Note 2!
yankees45us said:
Since the build stayed the same is that the reason why the binary count didn't matter on this update?
Sent from my Amazing Galaxy Note 2!
Click to expand...
Click to collapse
My understanding is that the counter doesn't count official updates.
yankees45us said:
Same here.
View attachment 1912591
Sent from my Amazing Galaxy Note 2!
Click to expand...
Click to collapse
There you go. Your screenshot explains why you still have the recent apps bug by waking up the phone with home button. You're still on MA7 build and Kernel. You guys are only running the MC2 modem I believe.
Here's what accepting the ota looks like..
Sent from my SPH-L900 using xda app-developers app
ArtooDetoo said:
Yes, just the modem and a home screen security fix in this update. Build stays the same.
Click to expand...
Click to collapse
Wrong. Modem, build, and Kernel are different with this update.
Sent from my SPH-L900 using xda app-developers app
RayTrue04 said:
Wrong. Modem, build, and Kernel are different with this update.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Ahh, didn't do my homework on that.
RayTrue04 said:
There you go. Your screenshot explains why you still have the recent apps bug by waking up the phone with home button. You're still on MA7 build and Kernel. You guys are only running the MC2 modem I believe.
Here's what accepting the ota looks like..
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
I guess no one has a zip file that includes everything. This sucks.
Sent from my Amazing Galaxy Note 2!
yankees45us said:
I guess no one has a zip file that includes everything. This sucks.
Sent from my Amazing Galaxy Note 2!
Click to expand...
Click to collapse
Use one of Garwin's MC2 OC. That should get you on MC2 everything.. I'm trying to find just the kernel so I can flash twrp to install su again then flash back the stock MC2 kernel. I lost root for accepting the ota!
Sent from my SPH-L900 using xda app-developers app
RayTrue04 said:
Use one of Garwin's MC2 OC. That should get you on MC2 everything.. I'm trying to find just the kernel so I can flash twrp to install su again then flash back the stock MC2 kernel. I lost root for accepting the ota!
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Have a link? Thanks for the help
Sent from my Amazing Galaxy Note 2!
yankees45us said:
Have a link? Thanks for the help
Sent from my Amazing Galaxy Note 2!
Click to expand...
Click to collapse
Sure. Make sure you download the right one. No data if you want to keep your data intact. Also I read that the one clicks don't give you the modem but since you already have it you should be on MC2 everything after flashing a OC.
http://forum.xda-developers.com/showthread.php?t=2241136
Sent from my SPH-L900 using xda app-developers app
RayTrue04 said:
Sure. Make sure you download the right one. No data if you want to keep your data intact. Also I read that the one clicks don't give you the modem but since you already have it you should be on MC2 everything after flashing a OC.
http://forum.xda-developers.com/showthread.php?t=2241136
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Is there anyway to do this without reinstalling a full rom? Anyway to get the old ma7 modem and just take ota update instead? It's a lot easier to do this and lose root cause it's really easy to get it back.
Sent from my Amazing Galaxy Note 2!
---------- Post added at 03:57 AM ---------- Previous post was at 03:25 AM ----------
I got modem ma7 back. I would just like to take ota update and be done. I don't want to install another rom as my Google wallet still works and don't want to ruin it. Any suggestions? I have since unrooted using superuser and installed stock recovery. I tried using the .zip file from another post that supposedly is a zipped ota but it doesn't work.
Sent from my Amazing Galaxy Note 2!
RayTrue04 said:
Use one of Garwin's MC2 OC. That should get you on MC2 everything.. I'm trying to find just the kernel so I can flash twrp to install su again then flash back the stock MC2 kernel. I lost root for accepting the ota!
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Here ya go. MC2 kernel.
http://rwilco12.com/downloads.php?d...PH-L900)/Kernels/Stock (TW) Kernels/One-Click
egeek1 said:
Here ya go. MC2 kernel.
http://rwilco12.com/downloads.php?d...PH-L900)/Kernels/Stock (TW) Kernels/One-Click
Click to expand...
Click to collapse
Thanks buddy but I had already found it and rooted hours ago lol
Sent from my SPH-L900 using xda app-developers app
---------- Post added at 01:48 AM ---------- Previous post was at 01:44 AM ----------
yankees45us said:
Is there anyway to do this without reinstalling a full rom? Anyway to get the old ma7 modem and just take ota update instead? It's a lot easier to do this and lose root cause it's really easy to get it back.
Sent from my Amazing Galaxy Note 2!
---------- Post added at 03:57 AM ---------- Previous post was at 03:25 AM ----------
I got modem ma7 back. I would just like to take ota update and be done. I don't want to install another rom as my Google wallet still works and don't want to ruin it. Any suggestions? I have since unrooted using superuser and installed stock recovery. I tried using the .zip file from another post that supposedly is a zipped ota but it doesn't work.
Sent from my Amazing Galaxy Note 2!
Click to expand...
Click to collapse
Well if you're stock then go ahead and try the ota.zip posted here. If you have stock recovery it should take it. Also I don't see why doing a No Data OC will ruin your Google wallet. Doing a no data should be like accepting an ota.
Sent from my SPH-L900 using xda app-developers app
No go. Back in stock recovery and even unrooted, it just won't take ota zip. It doesn't even ask for the pushed ota anymore. I guess I'll stick with this till next update.
Sent from my Amazing Galaxy Note 2!
+I take no credit for any of this development, only reposting.
I have found a temporary fix for 4.3 tw roms that lose signal when sleeping. Keep in mind I have tested both methods (I have only tested a few tw 4.3 roms, but should work 4 all), you need to use the desktop tool to convert the rom.
http://forum.xda-developers.com/showthread.php?t=739530
PLEASE TRY TO STAY ON TOPIC, it is much appreciated.
Sent from my SGH-M919 using xda app-developers app
How? Just flash it? I'm having data drop also.
Sent from my GT-I9505 using Tapatalk 2
epsix said:
How? Just flash it? I'm having data drop also.
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
you will want to use the tool labeled as "ResignUpdate-v3.0.1-Toggle2G-v0.3.5.zip" and use it to convert the ROM, it will export a fixed ROM, move the .zip to your device and then flash it. there are instructions in the link provided.
EDIT: the tool is a desktop application so you will need to extract its contents on to your computer
ChadBFlores said:
I take no credit for any of this development, only reposting.
I have found a temporary fix for 4.3 tw roms that lose signal when sleeping. Keep in mind I have tested both methods (I have only tested a few tw 4.3 roms, but should work 4 all), you need to use the desktop tool to convert the rom.
http://forum.xda-developers.com/showthread.php?t=739530
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Question does this make the rom not able to go in to 2g mode ?? or does it actually let it switch between 2g/3g/lte without data dropping ???
Reminder: this is a temporary fix.
When phone is awake signal status functions normally.
When phone is sleeping your phone will switch in to 2g-only mode
Sent from my SGH-M919 using xda app-developers app
ChadBFlores said:
Reminder: this is a temporary fix.
When phone is awake signal status functions normally.
When phone is sleeping your phone will switch in to 2g-only mode
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Well that's perfect...... So we could let it go to sleep and won't lose data ????
Would anyone be willing to upload a 4.3 rom with the fix already included? I don't have access to a pc or computer as I do not own one.
Sent from my GT-I9505 using xda app-developers app
pezlomd said:
Would anyone be willing to upload a 4.3 rom with the fix already included? I don't have access to a pc or computer as I do not own one.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
I'm doing it to the latest version of the international goldeneye flashing it and giving it a go....... I'll upload it for you if it works out fine for me
I also pmed iB4STiD I talked to him in the past see if he wants to maybe include this in our version for tmobile till we get a new modem I know he said he was going to bring the tmobile version back
gdmlaz said:
I'm doing it to the latest version of the international goldeneye flashing it and giving it a go....... I'll upload it for you if it works out fine for me
I also pmed iB4STiD I talked to him in the past see if he wants to maybe include this in our version for tmobile till we get a new modem I know he said he was going to bring the tmobile version back
Click to expand...
Click to collapse
Awesome bro.. If u can upload it for me that would be great. . I also run the latest golden eye I just have no way of implanting the fix..
Sent from my GT-I9505 using xda app-developers app
pezlomd said:
Awesome bro.. If u can upload it for me that would be great. . I also run the latest golden eye I just have no way of implanting the fix..
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
I would like a copy also, if you don't mind. I can't find a copy of Golden Eye since the thread closed.
Thank You
pezlomd said:
Awesome bro.. If u can upload it for me that would be great. . I also run the latest golden eye I just have no way of implanting the fix..
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
vicvon said:
I would like a copy also, if you don't mind. I can't find a copy of Golden Eye since the thread closed.
Thank You
Click to expand...
Click to collapse
Been a while since I use cmd and can't get it to work so I'm kinda stuck lol
gdmlaz said:
Been a while since I use cmd and can't get it to work so I'm kinda stuck lol
Click to expand...
Click to collapse
Good news for you!! You do not need to use cmd, you can use the java application "ResignUpdate.jar".
ChadBFlores said:
Good news for you!! You do not need to use cmd, you can use the java application "ResignUpdate.jar".
Click to expand...
Click to collapse
I used that app without doing any of the prior steps in the readme file and ended up making the rom 0bites basically an empty file..... How did you go about doing yours ????
is the .zip for the resign tool extracted?
also it takes time, it will not be ready instantly, you will have to wait for the tool to finish processing
Make sure java is up to date.
Sent from my SGH-M919 using Tapatalk
pezlomd said:
Would anyone be willing to upload a 4.3 rom with the fix already included? I don't have access to a pc or computer as I do not own one.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
I might be able to, it is a i9505 rom tho.
ChadBFlores said:
I might be able to, it is a i9505 rom tho.
Click to expand...
Click to collapse
those are the ones we use anyways can you do the latest goldeneye please..... I'll give it another shot now maybe something failed the first time
gdmlaz said:
those are the ones we use anyways can you do the latest goldeneye please..... I'll give it another shot now maybe something failed the first time
Click to expand...
Click to collapse
Not me, I'm using the T-Mobile leak of MI9. Apps2sd, WiFi calling and android 4.3.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also, be sure you get permission before modifying a ROM and uploading. Some devs may take offense.
I'll have a build up for everyone by tomorrow night. (De)odex stock/slim, that's 4 versions. It will be close to stick as possible other than root and missing the boot loader and Knox.
Sent from my SGH-M919 using Tapatalk
omnifarious said:
Not me, I'm using the T-Mobile leak of MI9. Apps2sd, WiFi calling and android 4.3.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Where can we get that version? That would be awesome.
vicvon said:
Where can we get that version? That would be awesome.
Click to expand...
Click to collapse
I made it from the leak from a while back. The tester could only dump the system folder without rooting as he had to return the device by the end of the week
Sent from my SGH-M919 using Tapatalk
This tool will allow you remove the Tampered flag from your bootloader. It will also allow you to easily Lock and Unlock your Bootloader directly from recovery.
No root required since it is run in recovery, however you still must be S-OFF.
Before using this tool you need to be sure you are using the latest version of recovery as the M7 U/UL/Verizon TWRP requires at least version 2.6.3.3 for this package to work. The current downloads for both CWM and TWRP can found below:
The latest M7 Verizon TWRP can be downloaded HERE.
The latest M7 Verizon CWM can be downloaded HERE.
Saying this again in case you missed it: YOU MUST BE S-OFF!
To use the tool simply copy the zip file to your phone and then boot to your custom recovery and choose install. Then browse to where you copied the file and select it. The aroma installer will begin. Follow the steps outlined in the pictures below and choose the options you want to run.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now you can just keep this file on your phone and Lock and Unlock at anytime without a PC and without losing data.
***Credits***
S-trace for originally discovering the location of the lock status flag. See this thread.
scotty1223 for his ADB shell commands. Threads HERE and HERE. Scotty was also very helpful to me in understanding some of the default values.
Just to be clear I did not just copy and paste scotty1223's commands into a aroma installer. The echo command can be problematic in aroma, so I developed original code for all four commands. The end result is the same in that the data in the partitions is changed as needed.
***Download***
Guru Bootloader Reset Tool
md5: fdb8264a8f4741bae22939cd7734f7c2
Enjoy!
If this helped you out please consider a small donation or just a thanks would be great.
Demo and Troubleshooting
Demo Video:
***Troubleshooting***
If the installer stays on this screen fore more than a few seconds, then it means you need to delete/format cache. This can be done within both recoveries. You may need to reboot recovery after clearing cache and begin the installer again. This seems to happen more on CWM than TWRP.
If the installer runs but your bootloader doesn't change, it is proably one of these things:
You are not S-Off
You do not have the latest version of recovery (I recommend TWRP)
I can vouch for this working with the latest TWRP 2.6.3.3.
Thanks for the hard work!
Sent from my HTC6500LVW using XDA Premium 4 mobile app
---------- Post added at 09:17 PM ---------- Previous post was at 09:14 PM ----------
And definitely wipe cache, I had the hanging screen until I wiped.
Sent from my HTC6500LVW using XDA Premium 4 mobile app
Any chance of getting this for the Sprint variant?
bigdaddy619 said:
Any chance of getting this for the Sprint variant?
Click to expand...
Click to collapse
Yes. This version (1.0) also works on Sprint variant.
crushalot said:
Yes. This version (1.0) also works on Sprint variant.
Click to expand...
Click to collapse
Excellent TY
Does this require a touch based recovery?
Sent from my HTC6500LVW using XDA Premium 4 mobile app
pandamaja said:
Does this require a touch based recovery?
Click to expand...
Click to collapse
Per the OP, this requires the latest builds of TWRP or CWM, which are touch enabled.
Sent from my HTC6500LVW using XDA Premium 4 mobile app
kdj67f said:
Per the OP, this requires the latest builds of TWRP or CWM, which are touch enabled.
Sent from my HTC6500LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Latest CWM is available in touch and non touch.
Sent from my HTC6500LVW using XDA Premium 4 mobile app
pandamaja said:
Latest CWM is available in touch and non touch.
Sent from my HTC6500LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The link for CWM in the OP is for touch. If you are running the classic version, try this out and report back if it works.
Sent from my HTC6500LVW using XDA Premium 4 mobile app
I read in the TWRP forum that 2.6.3.3 has a known bug with charging the phone, and some are recommending not to use it right now.
Have any of you guys that are running the latest version know about this bug, and if so has it been an issue enough to revert back to 2.6.3.0?
Sent from my HTC's darkside.
I flashed 2.6.3.3 Friday night and have not had noticeable changes in battery charging behavior, battery drain or performance issues in general. I seem to remember Tue charging bug brought up by andybones being something to do with charging the phone while powered off, causing the notification led to turn on and not reboot without going to bootloader. I don't turn my phone off so I haven't had the problem yet. Perhaps reading the other forum posts regarding that issue and posting in the original development forum on the TWRP thread would get you more answers.
Edit: I read the thread, and hashcode has recommended not to use that version of TWRP until the charging bug is fixed. I still haven't noticed it so I am not changing back.
pandamaja said:
Does this require a touch based recovery?
Sent from my HTC6500LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It should work on the non touch version of CWM.
I have not noticed any issues with the new TWRP either regarding charging.
Hm this should be a good tool to get the Google drive promo on 4.3 sense roms :thumbup:
Sent from my HTC6500LVW using Tapatalk
Any way you can add the code to remove the red text from the splash screen, or does this do that?
Sent from my HTC6500LVW using Tapatalk
nrfitchett4 said:
Any way you can add the code to remove the red text from the splash screen, or does this do that?
Sent from my HTC6500LVW using Tapatalk
Click to expand...
Click to collapse
No, this tool is for the bootloader only.
You need to modify the hboot in order to remove that.
@santod040 already has one here:
http://forum.xda-developers.com/showthread.php?t=2481277
While I could build an option to flash that modified hboot during the install, it is better to to that manually so you are aware of your hboot. If you S-on with a modified hboot you will end up with a bricked device.
Same reason I don't add an option to turn S-on (that was asked for) because I don't want users to brick phones because the mod is too easy and therefor overlooked when returning to stock for some reason.
I may add the option to install the GE hboot with the dark unbranded bootloader, which doesn't have any red text in the future. However that hboot has yet to be tested on Verizon.
Thanks
In what circumstances would one want/need to toggle the lock state of the bootloader?
Sent from my SCH-I605 using Tapatalk
mlin said:
In what circumstances would one want/need to toggle the lock state of the bootloader?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Possibly to return to stock for warranty claims. This is just a nice graphical interface that doesn't need command line or a computer. Just another great option that our devs provide us!
Sent from my HTC6500LVW using XDA Premium 4 mobile app
kdj67f said:
Possibly to return to stock for warranty claims. This is just a nice graphical interface that doesn't need command line or a computer. Just another great option that our devs provide us!
Sent from my HTC6500LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So is a locked bootloader required to flash the stock recovery?
Sent from my SCH-I605 using Tapatalk
mlin said:
So is a locked bootloader required to flash the stock recovery?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
You need to have an unlocked bootloader in order to flash any recovery, stock or custom.
Also sometimes there are promotions like the latest Google drive 25GB one that requires a locked bootloader. Also some rom.zip and firmware packages require a locked bootloader on the GSM variants, but I am not sure if that is the case for Verizon.
ROM is built from the hard work of dr87. I used THIS ROM - Updater Script - from dr87 as the base for both ROMs.
I have modified both ROMs to work on our Sprint LG G2.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INSTRUCTIONS
MAKE A BACKUP FIRST!!!
1. Full wipe (Wipe cache, data, system, dalvik cache)
2. Flash Stock Debloated ROM_V2 or Stock ROM_V2
3. Flash KitKat MODEM
4. Reboot
5. After system reboots, power down, and reboot back into recovery.
6. Flash FIRMWARE
7. Reboot
If needed here is the White Lines Fix
I Followed the directions from yougud. HERE is his original post.
Not Working
★ NFC
★ ........
★ ........
Working
★ Wi-Fi Calling
★ Wi-Fi
★ Mobile Data
★ GPS
★ Sound
★ Sync
★ Browser
★ Phone
★ PlayStore
★ Mail, SMS, MMS
★ USB Mass Storage
★ ......
Reserved 2
[ROM] T-Mobile 4.4.2 Stock Debloated
So is a tmobile rom but will work on sprint network ?
Sent from my iCrap using Tapatalk
---------- Post added at 11:15 AM ---------- Previous post was at 11:14 AM ----------
Wifi calling on sprint ? That's nice !!!!
Sent from my iCrap using Tapatalk
carrilloevo said:
So is a tmobile rom but will work on sprint network ?
Sent from my iCrap using Tapatalk
---------- Post added at 11:15 AM ---------- Previous post was at 11:14 AM ----------
Wifi calling on sprint ? That's nice !!!!
Sent from my iCrap using Tapatalk
Click to expand...
Click to collapse
Correct, WiFi calling is working.
So far the only thing I have found not working is NFC.
I'm only getting 2G
momentman10176 said:
I'm only getting 2G
Click to expand...
Click to collapse
Are you in a refarmed area, 1900 MHz?
Sent from my LG-D801 using Tapatalk
Novembre5 said:
Are you in a refarmed area, 1900 MHz?
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
Yes, and was getting 3.5G on the stock sprint rom.
momentman10176 said:
Yes, and was getting 3.5G on the stock sprint rom.
Click to expand...
Click to collapse
Not sure why you are only getting 2G. It has been working here.
Sent from my LG-D801 using Tapatalk
Is this rom rooted?
Sent from my LG-D801 using XDA Free mobile app
ammu2016 said:
Is this rom rooted?
Sent from my LG-D801 using XDA Free mobile app
Click to expand...
Click to collapse
Yes it is, SuperSu is included in both ROMs.
Sent from my LG-D801 using Tapatalk
If im coming from stock ZVC do i still need to flash the 'modem' and 'firmware'?
ammu2016 said:
If im coming from stock ZVC do i still need to flash the 'modem' and 'firmware'?
Click to expand...
Click to collapse
I did, but I don't think it is necessary.
Sent from my LG-D801 using Tapatalk
Installation failed! Debloated ROM.
Sent from my LG-D801 using XDA Free mobile app
No root on either rom!
Cant get root access on either rom. Says super user binary not installed. Tried both roms tried flashing super su through twrp and still no luck. Love the rom but need root. Any help greatly appreciated
ammu2016 said:
Installation failed! Debloated ROM.
Sent from my LG-D801 using XDA Free mobile app
Click to expand...
Click to collapse
Are you using TWRP 2.7.0? Make sure you are using the TWRP that is installed by AuoRec.
simsnet71 said:
Cant get root access on either rom. Says super user binary not installed. Tried both roms tried flashing super su through twrp and still no luck. Love the rom but need root. Any help greatly appreciated
Click to expand...
Click to collapse
Did you make sure you allowed TWPR to install/fix root after ROM was flashed?
Sent from my LG-D801 using Tapatalk
Novembre5 said:
Are you using TWRP 2.7.0? Make sure you are using the TWRP that is installed by AuoRec.
Did you make sure you allowed TWPR to install/fix root after ROM was flashed?
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
yes i did . using twrp installed by freegee think its 2.6.3.3
exellent work
will other Stock rooms work this way like 802 or at&t
Urgent help
Alright so this is a lot but i need your help.. i want to get kit kat 4.4.2 im currently on 4.2.2 with stock radio... my phone is LS 980 and im on Justin's tmobile rom.. how and where do i start please reply quick
TimmyLe7 said:
Alright so this is a lot but i need your help.. i want to get kit kat 4.4.2 im currently on 4.2.2 with stock radio... my phone is LS 980 and im on Justin's tmobile rom.. how and where do i start please reply quick
Click to expand...
Click to collapse
I was on Justin's Rom also with at&t service. I downloaded this Rom, the svc radio and zvc firmware and just followed the steps in the op. Only problem was I didn't have root so it easier to start with twrp 2.7 instead of 2.6.3.3. I had to use a different root method after and updated to the 2.7. Twrp.
Pm if u need any help
---------- Post added at 06:36 AM ---------- Previous post was at 06:32 AM ----------
safetaga said:
will other Stock rooms work this way like 802 or at&t
Click to expand...
Click to collapse
I believe the Rom has to be modified first like the aboot and system image. I'm no developers but u definitely don't want to just flash a unmodified at&t Rom on your LS980
---------- Post added at 06:42 AM ---------- Previous post was at 06:36 AM ----------
TimmyLe7 said:
Alright so this is a lot but i need your help.. i want to get kit kat 4.4.2 im currently on 4.2.2 with stock radio... my phone is LS 980 and im on Justin's tmobile rom.. how and where do i start please reply quick
Click to expand...
Click to collapse
This Rom being a kitkat Rom has great features and is extremely smooth and snappy. Also it's not constantly trying to install a T-Mobile system update that will brick your phone. Awesome Rom perfect experience for the GSM user?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to SaberKat Android TouchWiz 4.4.2. This is a Semi-Stock ROM with a few speed tweaks and a slightly modified kernel to allow permmisive state. Includes several S5 apps and probably more to come but who knows what I'll do with this thing. The ROM includes Xposed, Wanam and SE Mode Switcher used to activate permissive kernel. Updates are planned including at some point possibly implementing my own custom kernel.
Download: SaberKat 1.5
Download: SaberKat 1.0
SuperSU download: SuperSU
If you are still on the old 4.1.2 bootloader then you will need to flash agni kernel for WiFi
AGNI Download: AGNI Purestock Thread
AGNI External SD write fix. Should work with any kernel. Download: AGNI KK SD fix
New ATT 4.4.2 Modem: I317UCUCNE5_Modem.zip
New Canadian 4.4.2 Modem: I317MVLUDNF1 Modem.zip
HOW TO INSTALL
Download the zip
WIPE DATA/FACTORY RESET
Wipe System
Wipe Cache/Dalvic Cache
Flash the Rom
Reboot
Set up APN, save and select. Go back and turn on Flight Mode. Now turn off flight mode. Network switch now available but should be LTE on default. If not change it. Reboot to recovery (4 Way Reboot now standard) and flash SuperSU. Reboot and enjoy
Enjoy
Thanks to these fine folks here for helping me: @eZdubzitmk4 for helping me acclimate to TouchWiz as almost all my experience has been with AOSP. @gregsarg for numerous tests and continued effort. Not to mention hours of mind numbing searching and countless valuable input. @Mr.Bola for the S5 apps
Notes:Unobtrusive calling only works when in app. Messaging quick reply go to message settings, notifications and enable pop up. That's all for now, have to check what all I've actually changed. ENJOY THE ROM
Disclaimer:/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications.
*/
Reserved #1
If this is in the wrong section/thread please let me know guys as I have the ATT model so I wasn't quite sure
rogersb11 said:
Reserved #1
If this is in the wrong section/thread please let me know guys as I have the ATT model so I wasn't quite sure
Click to expand...
Click to collapse
No this is good it says ATT but really most Roms work on both
Thanks
This is mine
Sent from my GT-N7105 using XDA Premium 4 mobile app
Mine ..
Thank you !!...
I'm gonna play with this and see what a stock rom feels like for a few...
I appreciate the rom...!!...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
mataflakitas said:
This is mine
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
gregsarg said:
Mine ..
Thank you !!...
I'm gonna play with this and see what a stock rom feels like for a few...
I appreciate the rom...!!...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
MINE MUAHAHAHAHA. lol Also I'm deodexing and debloating right now so i'll reupload once it's finished. Thanks guys
Got it booted on stock kernel. ..
Runs nice. ...
I'm editing the build.prop now...
Stock DPI is different than the US roms. ..but no complaints. .
I'm gonna play some more. ..lol
Edit:
Camera is sweet !!
Same interface. ..but snappy and clear. ..
Video is nice too..g
Sent from my SGH-I317M using XDA Premium 4 mobile app
Could we flash this on at&t i317?
Sent from my SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 09:54 PM ---------- Previous post was at 09:54 PM ----------
Like has anyone tried it yet?
Sent from my SGH-I317 using XDA Premium 4 mobile app
Stock ROM SGH-I317M[4.4.2 KITKAT TW]
terpin32 said:
Could we flash this on at&t i317?
Sent from my SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 09:54 PM ---------- Previous post was at 09:54 PM ----------
Like has anyone tried it yet?
Sent from my SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Gregs has. Doubled flash. I'd use Agni stock until I work out the kernel but it does work. Smooth. Enjoy. Be updating the OP soon
rogersb11 said:
Gregs has. Doubled flash. I'd use Agni stock until I work out the kernel but it does work. Smooth. Enjoy. Be updating the OP soon
Click to expand...
Click to collapse
Sweet will give it a try when I get home and let you guys know how it went
Sent from my SGH-I317 using XDA Premium 4 mobile app
The rom definitely works on AT&T but is there a way to edit the apn (I know how to edit the apn) type as all that's available is internet+mms or one or the other?
Sent from my SGH-I317 using Tapatalk
cnote74 said:
The rom definitely works on AT&T but is there a way to edit the apn (I know how to edit the apn) type as all that's available is internet+mms or one or the other?
Sent from my SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Works on ATT for sure but I had to flash agni. Change network type to lte instead of w something. Don't have phone on me this instant. Rom is deodexing now and then I'm going to reupload
rogersb11 said:
Works on ATT for sure but I had to flash agni. Change network type to lte instead of w something. Don't have phone on me this instant. Rom is deodexing now and then I'm going to reupload
Click to expand...
Click to collapse
I can't edit that as I changed my build.prop to AT&T so that option isn't available to me.
Sent from my SGH-I317 using Tapatalk
Hmm.... I did mine first. I'll look into it. Plan on doing something with the kernel in real release. You using Agni?
rogersb11 said:
Hmm.... I did mine first. I'll look into it. Plan on doing something with the kernel in real release. You using Agni?
Click to expand...
Click to collapse
I'm using agni kernel didn't know if this would boot with the i317m kernel on a i317.
Sent from my SGH-I317 using Tapatalk
I've heard it has but it wouldn't for me. Try using the code *#*#4636#*#* and changing it from there
rogersb11 said:
I've heard it has but it wouldn't for me. Try using the code *#*#4636#*#* and changing it from there
Click to expand...
Click to collapse
I think that code might be deleted as I've heard a lot of usd codes weren't working anymore.
Sent from my SGH-I317 using Tapatalk
cnote74 said:
I think that code might be deleted as I've heard a lot of usd codes weren't working anymore.
Sent from my SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Yep just tried. Noted. Oh wait. You edited prop. Bet you broke root. Flash supersu zip and see if you can edit then
rogersb11 said:
Yep just tried. Noted. Oh wait. You edited prop. Bet you broke root. Flash supersu zip and see if you can edit then
Click to expand...
Click to collapse
Root Isn't broken it's not a big problem I can survive with it like this.
Sent from my SGH-I317 using Tapatalk