http://www.sammobile.com/2014/01/10...-kitkat-test-firmware-for-galaxy-s4-gt-i9505/
Sent from my SGH-M919 using Tapatalk 2
epsix said:
http://www.sammobile.com/2014/01/10...-kitkat-test-firmware-for-galaxy-s4-gt-i9505/
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Is it possible to get this leaked build running on the T-Mobile variant?
Yes... But need Dev to cook a ROM for us. Its just like Roms in i9505 section.
Sent from my SGH-M919 using Tapatalk 2
I'll make an Odin for people when i get home.
Sent from my SGH-M919 using Tapatalk
ShinySide said:
I'll make an Odin for people when i get home.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Just to be clear, the Odin-able ROM will contain Knox, thus flashing it will result in the installation of the e-fuse? Hence if folks attempt to revert, the Knox counter will then trip?
Dr. Fed said:
Just to be clear, the Odin-able ROM will contain Knox, thus flashing it will result in the installation of the e-fuse? Hence if folks attempt to revert, the Knox counter will then trip?
Click to expand...
Click to collapse
Won't contain the boot loader. So no Knox flag and should be revert able. Shouldn't trip anything since it's official firmware
Sent from my SGH-M919 using Tapatalk
ShinySide said:
Won't contain the boot loader. So no Knox flag and should be revert able. Shouldn't trip anything since it's official firmware
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Cool thanks. I know it wouldn't trip anything if installed, I was just concerned about reverting out of it. My understanding is that once Knox is on, the Knox counter is active. However, whay you're saying is thay the e fuse/Knox counter is boot loader dependent, therefore problem solved by removing the official Leak's boot loader... Correct?
Do you sub the boot loader with a previous version's boot loader? And if that's the case, would we expect the same kind of problems that were encountered with the 4.3 builds (sound, connectivity) until the hybrid modem solution was applied?
Dr. Fed said:
Cool thanks. I know it wouldn't trip anything if installed, I was just concerned about reverting out of it. My understanding is that once Knox is on, the Knox counter is active. However, whay you're saying is thay the e fuse/Knox counter is boot loader dependent, therefore problem solved by removing the official Leak's boot loader... Correct?
Do you sub the boot loader with a previous version's boot loader? And if that's the case, would we expect the same kind of problems that were encountered with the 4.3 builds (sound, connectivity) until the hybrid modem solution was applied?
Click to expand...
Click to collapse
No just don't add a bootloader at all.
And evidently people are able to revert according to the i9505 thread.
I'm on mk2 everything including bootloader. Once I have flashed it I'll provide full info if it trips anything.
Dunno yet. I'd imagine you'd at least need the mk2 modem. The modems will be removed too. They'll fail in Odin and if flashed will cause no service.
Sent from my SGH-M919 using Tapatalk
That will be cool. I will hold and wait for your result.
ShinySide said:
I'll make an Odin for people when i get home.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Guys make sure you do NOT flash this firmware. Its not for Tmobile. Its for DEV , they need to cook a ROM for us.
Sent from my SGH-M919 using Tapatalk 2
epsix said:
Guys make sure you do NOT flash this firmware. Its not for Tmobile. Its for DEV , they need to cook a ROM for us.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
You listened to the modder too much.
What exactly do you think this "cooking" thing you speak of? Deodexing and zip aligning with the kitchen?
Sent from my SGH-M919 using Tapatalk
ShinySide said:
You listened to the modder too much.
What exactly do you think this "cooking" thing you speak of? Deodexing and zip aligning with the kitchen?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I'm not a Dev,but don't have put it in dsixda's Android Kitchen and remove bootloader etc and deoxed or odex?
Sent from my SGH-M919 using Tapatalk 2
ShinySide, Cant wait for your results. :laugh:
ShinySide said:
You listened to the modder too much.
What exactly do you think this "cooking" thing you speak of? Deodexing and zip aligning with the kitchen?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
epsix said:
I'm not a Dev,but don't have put it in dsixda's Android Kitchen and remove bootloader etc and deoxed or odex?
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Hahaha no. Odex and Deodexing has absolutely nothing to do with it. Nor the kitchen.
Do things need removed? Yes. Bootloader and modem's would be one. They fail in odin. You can even flash the recovery if you wanted.
I did the same thing with 4.3 update. No kitchen needed. No fancy fake cooking. Or any other crap another has said.
I'll show you in the next 2 hours. Should be heading home in a few.
Sent from my SGH-M919 using Tapatalk
ShinySide said:
Hahaha no. Odex and Deodexing has absolutely nothing to do with it. Nor the kitchen.
Do things need removed? Yes. Bootloader and modem's would be one. They fail in odin. You can even flash the recovery if you wanted.
I did the same thing with 4.3 update. No kitchen needed. No fancy fake cooking. Or any other crap another has said.
I'll show you in the next 2 hours. Should be heading home in a few.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Sorry wasn't mean to offend you ,I guest you know what you're doing. I just don't want newbie like myself to just DL this and flash it.
Sent from my SGH-M919 using Tapatalk 2
ShinySide said:
Hahaha no. Odex and Deodexing has absolutely nothing to do with it. Nor the kitchen.
Do things need removed? Yes. Bootloader and modem's would be one. They fail in odin. You can even flash the recovery if you wanted.
I did the same thing with 4.3 update. No kitchen needed. No fancy fake cooking. Or any other crap another has said.
I'll show you in the next 2 hours. Should be heading home in a few.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Doesn't seem like is going to be so easy the guys over at the international version are trying to cook a rom without much success this is from iB4STiD which builds all the goldeneye roms
iB4STiD said:
4.4 so far
well.. the security on this is odd.. the kernel is either doing a check with the bootloader or its security check come in at the later part of the boot cycle .. its different i can say that .. but this is a leak of a beta who knows.. im still trying to get this stupid thing to boot we shall see.. dont hold ur breath until we get a kernel security bypass .. but it could be worse .. gotta love sammy!!
Click to expand...
Click to collapse
He's trying to modify it. I don't modify. I'm not a rom modder of factory firmware. I'll build Carbon, aokp, etc but not a modder.
What I'll give? Is factory touchwiz 4.4.
Sent from my SGH-M919 using Tapatalk
ShinySide said:
He's trying to modify it. I don't modify. I'm not a rom modder of factory firmware. I'll build Carbon, aokp, etc but not a modder.
What I'll give? Is factory touchwiz 4.4.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Sounds good Let me know if you get it working I'll flash it and give it a shot...... I know they chainfire has a root for it also
I tripped both flags on mk2 bootloader and phone reads custom , not that I care but , and wifi isn't working at the moment but everything else is
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9505 using Tapatalk
ShinySide said:
He's trying to modify it. I don't modify. I'm not a rom modder of factory firmware. I'll build Carbon, aokp, etc but not a modder.
What I'll give? Is factory touchwiz 4.4.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
ShinySide said:
I tripped both flags on mk2 bootloader and phone reads custom , not that I care but , and wifi isn't working at the moment but everything else is
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Yeah mines have been tripped for a while so it doesn't bother me at all either lol..... Weird that the wifi isn't working tho ??? Are you getting any signal lost or is the 4.3 radio working good ??
Related
Hi all.
I'm just new to GT-I9100, and I want to know how to do things well...
Pardon me if I missed another threads, but i could not find a proper one... I came from SE world, and things were quite different. A.K.A. ROMs, kernels, and such things... Are here a fastboot mode as it were in my Arc? How can I install CWM? And more important. Can I try any other rom besides stock?
Thanks in advance!!!
Sent from my GT-I9100 using xda premium
worf_1977 said:
Hi all.
I'm just new to GT-I9100, and I want to know how to do things well...
Pardon me if I missed another threads, but i could not find a proper one... I came from SE world, and things were quite different. A.K.A. ROMs, kernels, and such things... Are here a fastboot mode as it were in my Arc? How can I install CWM? And more important. Can I try any other rom besides stock?
Thanks in advance!!!
Yes you can try another rom besides stock.
I can help you if this is your wich...important is.
When you go ahead and root yoot your device...
You may loose your guaranty
BUT BEFORE YOU START FLASHIN MATE.
............You can kill you phone..............
check out witch kernel baseband and android version youre runnin.....take a screenie and post it..
THEN
check galaxys2root.com
For stock firmwares check out samfirmware.com
Last but not least....sammobile.com
Peace bro
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Sent from my GT-I9100 using xda premium
Then forget about kies
For saving data
Thats a pretty ****ty prog.
Go ahead buy an ex-sd...if you don't even have one
Download titanium backup
Sent from my GT-I9100 using xda premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here it is, mates... You seem to be more cooperating people that in Arc's forum
Addenda: I succesfully rooted my phone with SuperOneClick v. 2.3.3 with much trouble... Seems working fine...
Now, to the kernels, ROMs, and how to flash it, an what i have to care about in order to
Sent from my GT-I9100 using xda premium
Read the FAQS and GUIDES FIRST.
FAQ
http://forum.xda-developers.com/showthread.php?t=1065995
NEW HERE
http://forum.xda-developers.com/showthread.php?t=1134290
bible
http://forum.xda-developers.com/showthread.php?t=1473577
Guide
http://forum.xda-developers.com/showthread.php?t=1125282
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
worf_1977 said:
View attachment 964354
Here it is, mates... You seem to be more cooperating people that in Arc's forum
Addenda: I succesfully rooted my phone with SuperOneClick v. 2.3.3 with much trouble... Seems working fine...
Now, to the kernels, ROMs, and how to flash it, an what i have to care about in order to
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Ok...your device is rooted right.....So then you can choose by your self witch rom you want....for ICS ..i'm running westcrips Resurrection Remix v1.0....
Works like a charm..try this i think it's the best ics experiance you can get on the sgs2..it's real smooth..and the battery simply amazing.
http://forum.xda-developers.com/showthread.php?t=1436854
IMPORTANT make a titanium backup of all your apps.
And with safe backup ....backup your data ...like calendar contacts etc.
Before flashin....make a nandroid backup..for that go into custom recovery and run a backup.
Just in case if something goes wrong.
Sent from my GT-I9100 using xda premium
I believe that i will wait for the official ICS release from my carrier. I don't want to commit any mistakes as i did with Arc, wich i love... :'(
Sent from my GT-I9100 using xda premium
worf_1977 said:
I believe that i will wait for the official ICS release from my carrier. I don't want to commit any mistakes as i did with Arc, wich i love... :'(
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
You can everytime go back....check on samfirmware.com
If your carrier not already released an update.....NOTE sure you can wait...no one pushes you..
but you will get an ICS without balls. With f****n touchwiz. sammy does it bc they think we/user love this.it looks like gingerbreat or 2.3.5.
ICS official is allready out...you can flash the open europe version via odin...(you gonna lose root...when you flash a stock)
Your phone
Peace
Sent from my GT-I9100 using xda premium
2.3.5 is already shipped on mine
As you can see on my previous shot of system settings
And my question is that if i have to do an extra thing like unlock bootloader, as on Arc, or just use ODIN?
And another question. How can i reflash my original FW? Kies doesn't recognize my phone for firmware purposes... Even rescue one!!!
Sent from my GT-I9100 using xda premium
Maybe a little help to decide
First an older version of ics resurrection remix
http://www.youtube.com/watch?v=_IPk7tpyeXE&feature=youtube_gdata_player
Second official ics (incl.touchwiz)
http://www.youtube.com/watch?v=XAzr0iYr5WQ&feature=youtube_gdata_player
Sent from my GT-I9100 using xda premium
worf_1977 said:
2.3.5 is already shipped on mine
As you can see on my previous shot of system settings
And my question is that if i have to do an extra thing like unlock bootloader, as on Arc, or just use ODIN?
And another question. How can i reflash my original FW? Kies doesn't recognize my phone for firmware purposes... Even rescue one!!!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
FORGET ABOUT KIES!
You can wait 10years till you get an update.
I said this allready
youre running 2.3.5 Gingerbread
This is an 1 year old version
Ics 4.0.3 is allready out.
Try an ota update in settings scroll down to the bottom choose phone info...
One more time...for unlock bootloader or bootanimations. You have root your phone!!!!
Sent from my GT-I9100 using xda premium
Seriously you've buyed sammys flagship the gs2
Time to get that thing alive
Sent from my GT-I9100 using xda premium
http://www.sammobile.com/2012/03/17/what-is-android-4-0-for-the-galaxy-s-ii/
Sent from my GT-I9100 using xda premium
Zoozle86 said:
FORGET ABOUT KIES!
You can wait 10years till you get an update.
I said this allready
youre running 2.3.5 Gingerbread
This is an 1 year old version
Ics 4.0.3 is allready out.
Try an ota update in settings scroll down to the bottom choose phone info...
One more time...for unlock bootloader or bootanimations. You have root your phone!!!!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
It is already rooted. All I want is if i must unlock the bootloader or such thing, as Arc, and how i can do that
Sent from my GT-I9100 using xda premium
worf_1977 said:
It is already rooted. All I want is if i must unlock the bootloader or such thing, as Arc, and how i can do that
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hey worf was a kind busy sorry...
Just for info...you don't get updates via kies and ota because you're rooted.
When you want via kies ...so you should download a stock firmware from samfirmware...and flash via odin.
I loose a bit...do you mean a bootanimation?
Or the Kernel....
You must say Exactly what you want to change....flash
Sent from my GT-I9100 using xda premium
No need to unlock boot loader because the phone comes with an open bootloader start
Sent from my GT-I9100 using Tapatalk
Good morning!!!
So i just need to flash through ODIN the CWM so i can flash any ROM. Correct?
Sent from my GT-I9100 using xda premium
Zoozle86 said:
Hey worf was a kind busy sorry...
Just for info...you don't get updates via kies and ota because you're rooted.
When you want via kies ...so you should download a stock firmware from samfirmware...and flash via odin.
I loose a bit...do you mean a bootanimation?
Or the Kernel....
You must say Exactly what you want to change....flash
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I meant ROM flashing, like cm7, cm9, MIUI, or such things...
I also heard of the yellow triangle issue and the binary counter... Any method to avoid that?
Thanks!!!
Sent from my GT-I9100 using xda premium
worf_1977 said:
Good morning!!!
So i just need to flash through ODIN the CWM so i can flash any ROM. Correct?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Good morning
no buddy... first you have listen. What i'm postin.
Important.do your backup...i've posted already
Then you have to root your device..b.c it isn't.
Then tell me Please...what do you want to flash.
Sent from my GT-I9100 using xda premium
worf_1977 said:
I meant ROM flashing, like cm7, cm9, MIUI, or such things...
I also heard of the yellow triangle issue and the binary counter... Any method to avoid that?
Thanks!!!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Witch exactly...important for me to know...they are all different..
Don't care about this....buy an jig on amazon....
Sent from my GT-I9100 using xda premium
Hey guys. I copied the OTA from the cache folder and put the file up on my dropbox.
https://dl.dropboxusercontent.com/u/22628158/Android/Note%202%20-%20SPHL900/493c9176987a.update_SPH-L900_MA7_to_MC2.zip
Already there.
http://forum.xda-developers.com/showthread.php?t=2240961
Not really the same thing. This is for people who just want to update their completely stock phones.
Well after trying several times I gave it another shot. On my rooted stock rom running ma7 I installed twrp over my stock recovery, then I tried the all in one zip. Worked the first time. Don't know why it failed all other times. Thanks to everyone. First time using twrp and I really like it. Wish I had tried it long time ago. So easy to use.
Sent from my Amazing Galaxy Note 2!
yankees45us said:
Well after trying several times I gave it another shot. On my rooted stock rom running ma7 I installed twrp over my stock recovery, then I tried the all in one zip. Worked the first time. Don't know why it failed all other times. Thanks to everyone. First time using twrp and I really like it. Wish I had tried it long time ago. So easy to use.
Sent from my Amazing Galaxy Note 2!
Click to expand...
Click to collapse
Can you post a screenshot of your baseband and build number? I did the same thing and I want to confirm with someone else if the flash worked correctly.
My baseband is MC2 but my build is still MA7. Is this correct?
joelm84 said:
Can you post a screenshot of your baseband and build number? I did the same thing and I want to confirm with someone else if the flash worked correctly.
My baseband is MC2 but my build is still MA7. Is this correct?
Click to expand...
Click to collapse
Same here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Amazing Galaxy Note 2!
joelm84 said:
Can you post a screenshot of your baseband and build number? I did the same thing and I want to confirm with someone else if the flash worked correctly.
My baseband is MC2 but my build is still MA7. Is this correct?
Click to expand...
Click to collapse
Yes, just the modem and a home screen security fix in this update. Build stays the same.
ArtooDetoo said:
Yes, just the modem and a home screen security fix in this update. Build stays the same.
Click to expand...
Click to collapse
Since the build stayed the same is that the reason why the binary count didn't matter on this update?
Sent from my Amazing Galaxy Note 2!
yankees45us said:
Since the build stayed the same is that the reason why the binary count didn't matter on this update?
Sent from my Amazing Galaxy Note 2!
Click to expand...
Click to collapse
My understanding is that the counter doesn't count official updates.
yankees45us said:
Same here.
View attachment 1912591
Sent from my Amazing Galaxy Note 2!
Click to expand...
Click to collapse
There you go. Your screenshot explains why you still have the recent apps bug by waking up the phone with home button. You're still on MA7 build and Kernel. You guys are only running the MC2 modem I believe.
Here's what accepting the ota looks like..
Sent from my SPH-L900 using xda app-developers app
ArtooDetoo said:
Yes, just the modem and a home screen security fix in this update. Build stays the same.
Click to expand...
Click to collapse
Wrong. Modem, build, and Kernel are different with this update.
Sent from my SPH-L900 using xda app-developers app
RayTrue04 said:
Wrong. Modem, build, and Kernel are different with this update.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Ahh, didn't do my homework on that.
RayTrue04 said:
There you go. Your screenshot explains why you still have the recent apps bug by waking up the phone with home button. You're still on MA7 build and Kernel. You guys are only running the MC2 modem I believe.
Here's what accepting the ota looks like..
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
I guess no one has a zip file that includes everything. This sucks.
Sent from my Amazing Galaxy Note 2!
yankees45us said:
I guess no one has a zip file that includes everything. This sucks.
Sent from my Amazing Galaxy Note 2!
Click to expand...
Click to collapse
Use one of Garwin's MC2 OC. That should get you on MC2 everything.. I'm trying to find just the kernel so I can flash twrp to install su again then flash back the stock MC2 kernel. I lost root for accepting the ota!
Sent from my SPH-L900 using xda app-developers app
RayTrue04 said:
Use one of Garwin's MC2 OC. That should get you on MC2 everything.. I'm trying to find just the kernel so I can flash twrp to install su again then flash back the stock MC2 kernel. I lost root for accepting the ota!
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Have a link? Thanks for the help
Sent from my Amazing Galaxy Note 2!
yankees45us said:
Have a link? Thanks for the help
Sent from my Amazing Galaxy Note 2!
Click to expand...
Click to collapse
Sure. Make sure you download the right one. No data if you want to keep your data intact. Also I read that the one clicks don't give you the modem but since you already have it you should be on MC2 everything after flashing a OC.
http://forum.xda-developers.com/showthread.php?t=2241136
Sent from my SPH-L900 using xda app-developers app
RayTrue04 said:
Sure. Make sure you download the right one. No data if you want to keep your data intact. Also I read that the one clicks don't give you the modem but since you already have it you should be on MC2 everything after flashing a OC.
http://forum.xda-developers.com/showthread.php?t=2241136
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Is there anyway to do this without reinstalling a full rom? Anyway to get the old ma7 modem and just take ota update instead? It's a lot easier to do this and lose root cause it's really easy to get it back.
Sent from my Amazing Galaxy Note 2!
---------- Post added at 03:57 AM ---------- Previous post was at 03:25 AM ----------
I got modem ma7 back. I would just like to take ota update and be done. I don't want to install another rom as my Google wallet still works and don't want to ruin it. Any suggestions? I have since unrooted using superuser and installed stock recovery. I tried using the .zip file from another post that supposedly is a zipped ota but it doesn't work.
Sent from my Amazing Galaxy Note 2!
RayTrue04 said:
Use one of Garwin's MC2 OC. That should get you on MC2 everything.. I'm trying to find just the kernel so I can flash twrp to install su again then flash back the stock MC2 kernel. I lost root for accepting the ota!
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Here ya go. MC2 kernel.
http://rwilco12.com/downloads.php?d...PH-L900)/Kernels/Stock (TW) Kernels/One-Click
egeek1 said:
Here ya go. MC2 kernel.
http://rwilco12.com/downloads.php?d...PH-L900)/Kernels/Stock (TW) Kernels/One-Click
Click to expand...
Click to collapse
Thanks buddy but I had already found it and rooted hours ago lol
Sent from my SPH-L900 using xda app-developers app
---------- Post added at 01:48 AM ---------- Previous post was at 01:44 AM ----------
yankees45us said:
Is there anyway to do this without reinstalling a full rom? Anyway to get the old ma7 modem and just take ota update instead? It's a lot easier to do this and lose root cause it's really easy to get it back.
Sent from my Amazing Galaxy Note 2!
---------- Post added at 03:57 AM ---------- Previous post was at 03:25 AM ----------
I got modem ma7 back. I would just like to take ota update and be done. I don't want to install another rom as my Google wallet still works and don't want to ruin it. Any suggestions? I have since unrooted using superuser and installed stock recovery. I tried using the .zip file from another post that supposedly is a zipped ota but it doesn't work.
Sent from my Amazing Galaxy Note 2!
Click to expand...
Click to collapse
Well if you're stock then go ahead and try the ota.zip posted here. If you have stock recovery it should take it. Also I don't see why doing a No Data OC will ruin your Google wallet. Doing a no data should be like accepting an ota.
Sent from my SPH-L900 using xda app-developers app
No go. Back in stock recovery and even unrooted, it just won't take ota zip. It doesn't even ask for the pushed ota anymore. I guess I'll stick with this till next update.
Sent from my Amazing Galaxy Note 2!
+I take no credit for any of this development, only reposting.
I have found a temporary fix for 4.3 tw roms that lose signal when sleeping. Keep in mind I have tested both methods (I have only tested a few tw 4.3 roms, but should work 4 all), you need to use the desktop tool to convert the rom.
http://forum.xda-developers.com/showthread.php?t=739530
PLEASE TRY TO STAY ON TOPIC, it is much appreciated.
Sent from my SGH-M919 using xda app-developers app
How? Just flash it? I'm having data drop also.
Sent from my GT-I9505 using Tapatalk 2
epsix said:
How? Just flash it? I'm having data drop also.
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
you will want to use the tool labeled as "ResignUpdate-v3.0.1-Toggle2G-v0.3.5.zip" and use it to convert the ROM, it will export a fixed ROM, move the .zip to your device and then flash it. there are instructions in the link provided.
EDIT: the tool is a desktop application so you will need to extract its contents on to your computer
ChadBFlores said:
I take no credit for any of this development, only reposting.
I have found a temporary fix for 4.3 tw roms that lose signal when sleeping. Keep in mind I have tested both methods (I have only tested a few tw 4.3 roms, but should work 4 all), you need to use the desktop tool to convert the rom.
http://forum.xda-developers.com/showthread.php?t=739530
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Question does this make the rom not able to go in to 2g mode ?? or does it actually let it switch between 2g/3g/lte without data dropping ???
Reminder: this is a temporary fix.
When phone is awake signal status functions normally.
When phone is sleeping your phone will switch in to 2g-only mode
Sent from my SGH-M919 using xda app-developers app
ChadBFlores said:
Reminder: this is a temporary fix.
When phone is awake signal status functions normally.
When phone is sleeping your phone will switch in to 2g-only mode
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Well that's perfect...... So we could let it go to sleep and won't lose data ????
Would anyone be willing to upload a 4.3 rom with the fix already included? I don't have access to a pc or computer as I do not own one.
Sent from my GT-I9505 using xda app-developers app
pezlomd said:
Would anyone be willing to upload a 4.3 rom with the fix already included? I don't have access to a pc or computer as I do not own one.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
I'm doing it to the latest version of the international goldeneye flashing it and giving it a go....... I'll upload it for you if it works out fine for me
I also pmed iB4STiD I talked to him in the past see if he wants to maybe include this in our version for tmobile till we get a new modem I know he said he was going to bring the tmobile version back
gdmlaz said:
I'm doing it to the latest version of the international goldeneye flashing it and giving it a go....... I'll upload it for you if it works out fine for me
I also pmed iB4STiD I talked to him in the past see if he wants to maybe include this in our version for tmobile till we get a new modem I know he said he was going to bring the tmobile version back
Click to expand...
Click to collapse
Awesome bro.. If u can upload it for me that would be great. . I also run the latest golden eye I just have no way of implanting the fix..
Sent from my GT-I9505 using xda app-developers app
pezlomd said:
Awesome bro.. If u can upload it for me that would be great. . I also run the latest golden eye I just have no way of implanting the fix..
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
I would like a copy also, if you don't mind. I can't find a copy of Golden Eye since the thread closed.
Thank You
pezlomd said:
Awesome bro.. If u can upload it for me that would be great. . I also run the latest golden eye I just have no way of implanting the fix..
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
vicvon said:
I would like a copy also, if you don't mind. I can't find a copy of Golden Eye since the thread closed.
Thank You
Click to expand...
Click to collapse
Been a while since I use cmd and can't get it to work so I'm kinda stuck lol
gdmlaz said:
Been a while since I use cmd and can't get it to work so I'm kinda stuck lol
Click to expand...
Click to collapse
Good news for you!! You do not need to use cmd, you can use the java application "ResignUpdate.jar".
ChadBFlores said:
Good news for you!! You do not need to use cmd, you can use the java application "ResignUpdate.jar".
Click to expand...
Click to collapse
I used that app without doing any of the prior steps in the readme file and ended up making the rom 0bites basically an empty file..... How did you go about doing yours ????
is the .zip for the resign tool extracted?
also it takes time, it will not be ready instantly, you will have to wait for the tool to finish processing
Make sure java is up to date.
Sent from my SGH-M919 using Tapatalk
pezlomd said:
Would anyone be willing to upload a 4.3 rom with the fix already included? I don't have access to a pc or computer as I do not own one.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
I might be able to, it is a i9505 rom tho.
ChadBFlores said:
I might be able to, it is a i9505 rom tho.
Click to expand...
Click to collapse
those are the ones we use anyways can you do the latest goldeneye please..... I'll give it another shot now maybe something failed the first time
gdmlaz said:
those are the ones we use anyways can you do the latest goldeneye please..... I'll give it another shot now maybe something failed the first time
Click to expand...
Click to collapse
Not me, I'm using the T-Mobile leak of MI9. Apps2sd, WiFi calling and android 4.3.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also, be sure you get permission before modifying a ROM and uploading. Some devs may take offense.
I'll have a build up for everyone by tomorrow night. (De)odex stock/slim, that's 4 versions. It will be close to stick as possible other than root and missing the boot loader and Knox.
Sent from my SGH-M919 using Tapatalk
omnifarious said:
Not me, I'm using the T-Mobile leak of MI9. Apps2sd, WiFi calling and android 4.3.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Where can we get that version? That would be awesome.
vicvon said:
Where can we get that version? That would be awesome.
Click to expand...
Click to collapse
I made it from the leak from a while back. The tester could only dump the system folder without rooting as he had to return the device by the end of the week
Sent from my SGH-M919 using Tapatalk
KitKat Official 4.4 update "M919UVUFNB4" BASEBAND/Modem/FIXED FIRMWARE/ROOT/
Has anybody gotten a hold of the full firmware or just the baseband for 4.4 that was released for the tmo version??? anybody has it uploaded somewhere that downloads at a reasonable speed ???
I will upload it on mega once I get my hands on it if nobody has gotten it before I do so everyone else could download
Android version 4.4.2 / Baseband version M919UVUFNB4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The KitKat update brings improved stability, and major features include white status bar icons, improved performance, reduced memory usage, improvements to Samsung’s onscreen keyboard in landscape mode, inbuilt wireless printing support, ability to select the default launcher and messaging app from the settings menu, a camera shortcut and full-screen album art on the lock screen, and new emojis. You might also find that most apps are lesser access to the external storage than before, which is by Google’s design and hence something you’ll have to live with.
Improvements:
KitKat
Improved stability
New camera shortcut on the lock screen
Improved on screen keyboard
Prerequisites
M919UVUEMK2
Device software is not rooted
50% battery life
Latest version of Kies software downloaded on PC or MAC
Data connection
File size of update is 388 MB.
There is already a ROOT Method for our KITKAT UPDATE in the link below " I DO NOT TAKE CREDIT AS I FOUND ALL THIS SEARCHING "
http://true-android.blogspot.com/2014/03/root-m919uvufnb4-t-mobile-galaxy-s4.html
here is Chainfire Cf Auto root which works on 4.4
http://download.chainfire.eu/328/CF-Root/CF-Auto-Root/CF-Auto-Root-jfltetmo-jfltetmo-sghm919.zip
Update Package uploaded by ShinySide <~~~ I believe you need to be on stock 4.3 to use this, That's how I updated to 4.4 without the OTA Download
https://mega.co.nz/#!U0kgSBgL!oTyV07Oy7OQMtZsen4wxybh3s9ZYT0jeJsC-oe2wR84
4.3 Stock mk2 Firmware in case anybody needs it
https://mega.co.nz/#!44AgmayA!tPmGd4U_luXwiOhWibdblB1EXiJMwK4nlKaJz11wznI
4.4 Baseband thanks 2 @Fenny make sure to thank him for this
https://mega.co.nz/#!k1gEzDgQ!nDZe4sVHm9UEeZOaC1UKAxUnoLmQZGYCQ5VLvX6dFag
Download file and flash MODEM.bin thru ODIN under phone if you are using an older ODIN if you are using Odin 3.09 select Cp
4.4 to Full-Firmware
Actually fixed by @Fenny since the one release by Samsung doesn't even work........ deff go and thank him for this
http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip
Added----- Update Package uploaded by ShinySide <~~~ I believe you need to be on stock 4.3 to use this, That's how I updated to 4.4 without the OTA Download
https://mega.co.nz/#!U0kgSBgL!oTyV07Oy7OQMtZsen4wxybh3s9ZYT0jeJsC-oe2wR84
Saving this one
gdmlaz said:
Added----- Update Package uploaded by ShinySide <~~~ I believe you need to be on stock 4.3 to use this, That's how I updated to 4.4 without the OTA Download
https://mega.co.nz/#!U0kgSBgL!oTyV07Oy7OQMtZsen4wxybh3s9ZYT0jeJsC-oe2wR84
Click to expand...
Click to collapse
If this were flashed on stock 4.3 with Knox flag triggered would it not work, brick or work?
Sent from my SGH-M919 using Tapatalk
DylanTheVillian said:
If this were flashed on stock 4.3 with Knox flag triggered would it not work, brick or work?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Knox could be triggered it doesn't matter..... My device has knox triggered since a long time ago and upgraded to 4.4 just fine WIFI calling is working you just need to flash a costum kernel after to make WIFI work "I USED ADAM KERNEL" I'm sure any other tw 4.4 kernel will work just fine also..... for some reason this package doesn't update the baseband leaves it on the mk2
http://wanamlite.com/2014/03/06/adam-kernel-galaxys4-lte-v2-1-android-kitkat/ <~~~ ADAM KERNEL
I just got done with the OTA and I'm still have the MK2 baseband. How can I get the newer one?
imanoobfml said:
I just got done with the OTA and I'm still have the MK2 baseband. How can I get the newer one?
Click to expand...
Click to collapse
Is weird that the OTA update is not upgrading us to the newer baseband...... I guess we have to wait till the complete firmware is out that will deff upgrade us to the new Baseband ???? is ur WIFI working after the OTA update ?? with stock kernel ?
THE ACTUAL FIRMWARE hasn't been released to download so we'll have to wait till is uploaded
I actually see that some people got updated to the newer BASEBAND with the OTA update and some DIDN'T that's just weird..... I guess the unlucky ones have to wait till the full firmware is released
@gdmlaz did you odin the update?
Sent from my SGH-M919 using Tapatalk
princeasi said:
@gdmlaz did you odin the update?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I actually updated it by going into the FACTORY RECOVERY and flashing it from an external sd card...... maybe that's why my baseband didn't get updated ????
@gdmlaz thanks. Did you need to restore your data?
Sent from my SGH-M919 using Tapatalk
princeasi said:
@gdmlaz thanks. Did you need to restore your data?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Nope everything how it was before no need to reinstall apps/or data
gdmlaz said:
I actually updated it by going into the FACTORY RECOVERY and flashing it from an external sd card...... maybe that's why my baseband didn't get updated ????
Click to expand...
Click to collapse
The only reason I updated was for the newer baseband. I guess I'll just wait for it. I didn't really try out the stock at all. I just finished the update and after Rooting and custom recovery, I'm restoring my GPE rom. I can't take TW.
imanoobfml said:
The only reason I updated was for the newer baseband. I guess I'll just wait for it. I didn't really try out the stock at all. I just finished the update and after Rooting and custom recovery, I'm restoring my GPE rom. I can't take TW.
Click to expand...
Click to collapse
Yea my main reason for me was also the baseband since I use mostly International Roms........ Don't have 2 much need in Wifi calling also.....
gdmlaz said:
Yea my main reason for me was also the baseband since I use mostly International Roms........ Don't have 2 much need in Wifi calling also.....
Click to expand...
Click to collapse
Agreed. Only interested in the baseband.. I Will wait.
When I try installing update zip via philz recovery it gives me a status error 7 anyone getting this
Sent from my SGH-M919 using XDA Premium 4 mobile app
Romcrazguy said:
When I try installing update zip via philz recovery it gives me a status error 7 anyone getting this
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You need to use the stock recovery comes from the stock Rom.
Sent from my GT-I9505G using Tapatalk
Cwm or twrp
Sent from my SGH-M919 using XDA Premium 4 mobile app
gdmlaz said:
Is weird that the OTA update is not upgrading us to the newer baseband...... I guess we have to wait till the complete firmware is out that will deff upgrade us to the new Baseband ???? is ur WIFI working after the OTA update ?? with stock kernel ?
THE ACTUAL FIRMWARE hasn't been released to download so we'll have to wait till is uploaded
I actually see that some people got updated to the newer BASEBAND with the OTA update and some DIDN'T that's just weird..... I guess the unlucky ones have to wait till the full firmware is released
Click to expand...
Click to collapse
My baseband got updated and I took the ota and already rooted it working great!
Sent from my SGH-M919 using Tapatalk
style154 said:
My baseband got updated and I took the ota and already rooted it working great!
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Were you previously rooted before updating?
Sent from my SGH-M919 using Tapatalk
princeasi said:
Were you previously rooted before updating?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Well I was but odined the stock unrooted firmware and took ota because tmobile somehow knows if you're rooted I even moved supersu, the only modified system file I had to data/app and still couldn't take the ota. Kept getting a message my device was modified. So I was unrooted when I took the ota
Sent from my SGH-M919 using Tapatalk
Nothing fancy, just the Boost/VM variant of 4.4.2 Kit Kat tar, captured from Kies.
NOTE: For those Boost/VM users who flashed the Sprint ND8 version, this WILL flash successfully over the ND8 bootloader.
- This will (should) not wipe your data.
- As with everything, you are responsible for what you do to your device.
- I have Deodexed and Odexed rooted stock zips ready to test if someone wants to give them a go. Let me know.
Download Link
Instructions:
1. Download file to your PC(somewhere you can find it!)
2. Put your phone into Download/Odin mode
3. Start Odin(I suggest the latest, 3.09 is out now I think, I used 3.07)
4. Click on PDA, find tar file, click it to put it into PDA slot
5. Click Start
6. Takes a good 15 minutes, so sit back and chill. It will reboot on it's own, and you now have Kit Kat.
Oh, and because I know someone will ask, YES, this does have the Knox bootloader on it
Does anyone have the modem from this build. Hoping it will fix issues I'm having with ND8 modem.
Sent from my SPH-L710 using XDA Premium 4 mobile app
marcran75 said:
Does anyone have the modem from this build. Hoping it will fix issues I'm having with ND8 modem.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It's the last download link in the OP below. Good luck!
http://forum.xda-developers.com/showthread.php?p=53219958
Sent from my SM-G900P using XDA Free mobile app
jdsingle76 said:
It's the last download link in the OP below. Good luck!
http://forum.xda-developers.com/showthread.php?p=53219958
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
No dice. Wiped cache and dalvik, flashed modem and wiped cache and dalvik again for good measure. Wi-Fi won't even turn on.
Sent from my SPH-L710 using XDA Premium 4 mobile app
marcran75 said:
No dice. Wiped cache and dalvik, flashed modem and wiped cache and dalvik again for good measure. Wi-Fi won't even turn on.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It did the same thing for me on nd8 boot loader. Try a custom kernel perhaps. KT747 was recommended to me for that fix, but I flashed ndc before I got around to trying it
Sent from my SM-G900P using XDA Free mobile app
jdsingle76 said:
It did the same thing for me on nd8 boot loader. Try a custom kernel perhaps. KT747 was recommended to me for that fix, but I flashed ndc before I got around to trying it
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
I can confirm it works.
Sent from my SPH-L710 using XDA Premium 4 mobile app
marcran75 said:
I can confirm it works.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yep ktoonsez's custom kernal is awsome.
SPH-L710 SGS3 Bilgerryan's Wicked X Kit Kat v7.0 with s5 ported apps - Powered by Ktoonsez's KT747
marcran75 said:
I can confirm it works.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Awesome, glad it worked out for you. I'll post that fix in the OP.
Sent from my SM-G900P using XDA Free mobile app
Im going to stick with the nd8 modem. I thought about trying this but everything is working fine. I use virgin mobile and i use xda. When i bought my s3 i couldn't find kit kat for virgin so i researched the sprint tar. I was only on the stock virgin 4.3 for a day, and rooted and what not. I odined sprint s3 stock nd8 tar through odin3.07 with reboot unticked- pulled battery - odined philz touch recovery(spr) reboot unticked - pulled battery. Then i booted into recovery flashed newest philz (lte) recovery. Then i flashed bilgerryans wicked x rom. Phone is now rooted, deodexed, and has custom kernal. Phone works great, especially since i changed data setting for throttling. Hope this helps someone. My exact steps i took to get my phone to awsomeness.
SPH-L710 SGS3 Bilgerryan's Wicked X Kit Kat v7.0 with s5 ported apps - Powered by Ktoonsez's KT747
Just Odin'd my GS3 today with this and everything went well. My drop down notification bar says Virgin Mobile like it should. No problems except not receiving a 4G signal where I used to. It doesn't even say 3g. Is there something I should know about this? LOL. Any help appreciated.
Sent from my SAMSUNG-SM-G900A using XDA Premium 4 mobile app
PS4AndroidHacker said:
Just Odin'd my GS3 today with this and everything went well. My drop down notification bar says Virgin Mobile like it should. No problems except not receiving a 4G signal where I used to. It doesn't even say 3g. Is there something I should know about this? LOL. Any help appreciated.
Sent from my SAMSUNG-SM-G900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Update your Profile and PRL in Settings/More/System Updates
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PS4AndroidHacker said:
Just Odin'd my GS3 today with this and everything went well. My drop down notification bar says Virgin Mobile like it should. No problems except not receiving a 4G signal where I used to. It doesn't even say 3g. Is there something I should know about this? LOL. Any help appreciated.
Click to expand...
Click to collapse
Hi! Update PRL and Profile from the Settings / More / System Update menu.
If that doesn't do it, there's a code to dial in the stock dialer to reset data. I need to add it to my contacts some I keep forgetting. ##73678# or something like that. Be prepared, I think it reboots your phone in the process. Then update PRL and Profile again after.
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Wicked X v6.5, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
roirraW "edor" ehT said:
Hi! Update PRL and Profile from the Settings / More / System Update menu.
If that doesn't do it, there's a code to dial in the stock dialer to reset data. I need to add it to my contacts some I keep forgetting. ##73678# or something like that. Be prepared, I think it reboots your phone in the process. Then update PRL and Profile again after.
@bilgerryan, what's the code? TIA
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Wicked X v6.5, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
Click to expand...
Click to collapse
##72786#
Sent from my SPH-L710 using XDA Premium 4 mobile app
marcran75 said:
##72786#
Click to expand...
Click to collapse
Thank you, sir! Going in my contacts now.
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Wicked X v6.5, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
Is there a KnoxFree release of this yet? Am I just blind?
FatalIll said:
Is there a KnoxFree release of this yet? Am I just blind?
Click to expand...
Click to collapse
If your waiting for a knox free version.... You will be waiting forever. Its not going to happen. There is no way to take knox out of the bootloader, trust me everyone has been trying... Knox just makes it were you cant downgrade through odin. You can flash any rom version you want in recovery.
http://i1265.photobucket.com/albums...f-1145-4404-8c04-3460628ca1bf_zps4f663980.jpg
@the_original_teknikl
PCB Wicked Blue Theme
@TONY6669
Mean Wicked Green Theme
Pink for Breast Cancer Theme(4 4 2 port soon)
@TeamBlackOut
Themed Apps
@roirraw"edor"eht
Plasma Battery Mod
n00b-xda-disciple said:
If your waiting for a knox free version.... You will be waiting forever. Its not going to happen. There is no way to take knox out of the bootloader, trust me everyone has been trying... Knox just makes it were you cant downgrade through odin. You can flash any rom version you want in recovery.
http://i1265.photobucket.com/albums...f-1145-4404-8c04-3460628ca1bf_zps4f663980.jpg
@the_original_teknikl
PCB Wicked Blue Theme
@TONY6669
Mean Wicked Green Theme
Pink for Breast Cancer Theme(4 4 2 port soon)
@TeamBlackOut
Themed Apps
@roirraw"edor"eht
Plasma Battery Mod
Click to expand...
Click to collapse
MK5 was made KNOX free... Hell, I have MK5 modem & bootloader, completely KNOX free...
FatalIll said:
MK5 was made KNOX free... Hell, I have MK5 modem & bootloader, completely KNOX free...
Click to expand...
Click to collapse
And Knox was further incorporated into the device with 4.4 (and it will be in all Android devices to some extent with Android L). It makes a call to see if Knox is present at first boot, if it's not there it bricks the device. All the newer devices have it too. Unless you're planning on sending your phone to Samsung for a warranty claim there no reason to even think about it being there.
bilgerryan said:
And Knox was further incorporated into the device. It makes a call to see if Knox is present at first boot, if it's not there it bricks the device. All the newer devices have it too. Unless you're planning on sending your phone to Samsung for a warranty claim there no reason to even think about it being there.
Click to expand...
Click to collapse
Last time I had KNOX, I flashed a new recovery ZIP and bricked the phone. I don't want to tip-toe around KNOX if its there, I dont want to have to worry about it all together. If I just flash the Modem, will I get KNOX or will it just update the PRL and such?
FatalIll said:
Last time I had KNOX, I flashed a new recovery ZIP and bricked the phone. I don't want to tip-toe around KNOX if its there, I dont want to have to worry about it all together. If I just flash the Modem, will I get KNOX or will it just update the PRL and such?
Click to expand...
Click to collapse
To get 4.4.2 without bricking... You need to odin 4.4.2 stock tar and odin 4.4 2 compatible recovery afterwards. Any other way will lead to brick. I never have to worry about knox because the only tar i have is the 4.4.2. I flash whatever rom i want in recovery with no problems. Like Bilgerryan said knox really only affects you, if your trying to return your phone to samsung with knox tripped. Im loving 4.4.2 im glad i made the plunge.
http://i1265.photobucket.com/albums...f-1145-4404-8c04-3460628ca1bf_zps4f663980.jpg
@the_original_teknikl
PCB Wicked Blue Theme
@TONY6669
Mean Wicked Green Theme
Pink for Breast Cancer Theme(4 4 2 port soon)
@TeamBlackOut
Themed Apps
@roirraw"edor"eht
Plasma Battery Mod