Related
Hello forum,
I purchased a SGH-T889V Galaxy note 2 and tried to root it. The whole time i was under the impression it was the N7100. Obviously it was not and now i've screwed the phone where you get the yellow triangle thiingy. I need the original rom as i have looked high and low and there is nothing out yet. Its the Wind version of the phone launching here on |Oct 30th.
PLEASE HELP!!
I've tried everything but nothing seems to work..i.e. Samsung Kies, Odin..etc..
thanks!
shawnpandey said:
Hello forum,
I purchased a SGH-T889V Galaxy note 2 and tried to root it. The whole time i was under the impression it was the N7100. Obviously it was not and now i've screwed the phone where you get the yellow triangle thiingy. I need the original rom as i have looked high and low and there is nothing out yet. Its the Wind version of the phone launching here on |Oct 30th.
PLEASE HELP!!
I've tried everything but nothing seems to work..i.e. Samsung Kies, Odin..etc..
thanks!
Click to expand...
Click to collapse
Anyone has the rom or odin flashable rom or an image for this SGH-t889v???? please help...
Hi. Google checkfus. Download it and use it to pull official firmware from Samsung servers then use Odin to flash it to your phone.
prinzhernan said:
Hi. Google checkfus. Download it and use it to pull official firmware from Samsung servers then use Odin to flash it to your phone.
Click to expand...
Click to collapse
There is nothing for this phone on checkfus webversion... yet. But yes OP, do download checkfus and check it often to see if anything pops up for you to use... Maybe there already is something available that I just couldn't see in the web version.
Thanks guys for the recommendations. I'll keep an eye out. Right now I have an $800 brick on my desk.
Sent from my Galaxy Nexus using xda app-developers app
awh man that sucks, I have the same phone. Thank god I checked the version # right away. Not to worry, this is releasing on wind/mobilicity here in Canada on October 30. Hopefully the wait won't be too long for you!
EDIT: just saw you are from Canada too haha. anyways, good luck!
Rockin_Zombie said:
awh man that sucks, I have the same phone. Thank god I checked the version # right away. Not to worry, this is releasing on wind/mobilicity here in Canada on October 30. Hopefully the wait won't be too long for you!
EDIT: just saw you are from Canada too haha. anyways, good luck!
Click to expand...
Click to collapse
Sucks to hear that man! Where did u get it from? Also, what are the bands supported (as written on the box)? Thanks. Sorry, it's a bit offtopic.
Rockin_Zombie said:
awh man that sucks, I have the same phone. Thank god I checked the version # right away. Not to worry, this is releasing on wind/mobilicity here in Canada on October 30. Hopefully the wait won't be too long for you!
EDIT: just saw you are from Canada too haha. anyways, good luck!
Click to expand...
Click to collapse
Yeah man i was too excited to worry about finer details like which version it is and now i am paying the price. Yeah heard it's being release in a couple of weeks so hopefully we can have access to the factory rom!!!
Deliximus said:
Sucks to hear that man! Where did u get it from? Also, what are the bands supported (as written on the box)? Thanks. Sorry, it's a bit offtopic.
Click to expand...
Click to collapse
I got it from a reseller off Kijiji and not sure which bands are supported since there was no box. I know it sounds shady but it's not!!! I was using it on Bell for a whole day before this madness happened
Rockin_Zombie said:
awh man that sucks, I have the same phone. Thank god I checked the version # right away. Not to worry, this is releasing on wind/mobilicity here in Canada on October 30. Hopefully the wait won't be too long for you!
EDIT: just saw you are from Canada too haha. anyways, good luck!
Click to expand...
Click to collapse
Not too good with this rom stuff but since you have the same phone, is there any way you can extract the rom to an image i can flash using Odin?
shawnpandey said:
Not too good with this rom stuff but since you have the same phone, is there any way you can extract the rom to an image i can flash using Odin?
Click to expand...
Click to collapse
hmm I am not sure how to do that, if you can direct me to a tutorial I'd definitely do it.I am not sure if that can be done actually, since it's not rooted. Anyways, if I get time during the weekend I'll look it up and do it myself.
PS: I think we got it from the same seller lol
Sorry to hear that again. Were you able to access Bell's LTE and HSPA? Thanks, cause I'm on bell too!
risharm strong
Deliximus said:
Sorry to hear that again. Were you able to access Bell's LTE and HSPA? Thanks, cause I'm on bell too!
Click to expand...
Click to collapse
LTE version is the n7105 but im sure HSPA was working jaaaaaaaast fine.
Please...someone help me find the rom..
X 100
shawnpandey said:
LTE version is the n7105 but im sure HSPA was working jaaaaaaaast fine.
Please...someone help me find the rom..
X 100
Click to expand...
Click to collapse
T889 supposedly has LTE chip in there for future proofing, according to FCC filings.
Deliximus said:
T889 supposedly has LTE chip in there for future proofing, according to FCC filings.
Click to expand...
Click to collapse
Well that would be just wicked.
Cmon........ROM!
T889? Isn't that the US TMO variant model number?
Slap-Yourself :) said:
T889? Isn't that the US TMO variant model number?
Click to expand...
Click to collapse
That's what I thought. Where did you buy it? I need AWS!!!
Sent from a phone that's Note-worthy, via XDA Premium HD app.
madman604 said:
That's what I thought. Where did you buy it? I need AWS!!!
Sent from a phone that's Note-worthy, via XDA Premium HD app.
Click to expand...
Click to collapse
someone on kijiji toronto was selling a bunch of those, don't see the ad anymore though. I actually haggled with him and got the price down to 650, sweet deal!
madman604 said:
That's what I thought. Where did you buy it? I need AWS!!!
Sent from a phone that's Note-worthy, via XDA Premium HD app.
Click to expand...
Click to collapse
Me so curious!!!!!!!
OP- Can you confirm that TMO's form of 4G is working? :fingers-crossed:
seemed siberPr
Anyone!! Anything?!?!? I've googled the hell out of this and only thing is still this thread!!
AAGHHHH!H!H!H!H!H!!!!!!!
I can get Qhsusb_dload to show up from time to time on my PC when it connects. but I went to try and flash the Slim Rom from the original android section and it bricked my phone. no screen light up or anything. no LED flashing. i just get Qhsusb_dload when i connect to a PC.
What tricks can i do to get odin to see this.
Did you try the 3 button combination ? Volume down, home key?
Sent from my GT-N7100 using xda premium
[email protected] said:
Did you try the 3 button combination ? Volume down, home key?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
yes i did. idk if im doing it right tho.
And power on button,What phone you using?
Sent from my GT-N7100 using xda premium
billard412 said:
removal of moderated material
Click to expand...
Click to collapse
You need an attitude check. This was posted in Q&A, he had a question and needs help. If this was posted in the wrong forum, I could MAYBE see this kind of attitude but not here. You were helpful in giving him a link to get his device repaired, but the rest of it was just uncalled for.
kyhassen said:
I did research and no one gave a straight answer anywhere. i googled countless places. a lot of them said to do these button combinations and none worked. some say the only way to do it is through a jig. as you say Jtag. i do everything the way i usually do it by reading the posts before flashing.. idk what went wrong here.
Click to expand...
Click to collapse
As far as I know, he is right about JTAG being your only repair option. This may sound like an obvious question, but I have seen this happen before. Are you sure you were downloading from the right forum? (i.e. not accidentally downloading a ROM meant for another carrier.)
I'm kind of curious how this happens. Never heard of bricking from simply flashing a rom.
Sent from my SPH-L710 using xda app-developers app
mulhiny said:
I'm kind of curious how this happens. Never heard of bricking from simply flashing a rom.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
If rom is for another carrier or the international version of the S3 (i believe the I9300) then it'll brick it quick.
I thought the i9300 is the sprint version. i had looked it up... but oh well. I did more research i missed one step which may have caused it, or my download corrupted. But my next option is to find someone with a Jtag in my area.
kyhassen said:
I thought the i9300 is the sprint version. i had looked it up... but oh well. I did more research i missed one step which may have caused it, or my download corrupted. But my next option is to find someone with a Jtag in my area.
Click to expand...
Click to collapse
Sprint is the SPH-L710. So yeah.. may have flashed the wrong rom.. Always double check.. and if your in doubt.. ASK! lol
Use a jig. Will boot up into download mode. You need to use Odin and flash stock. Qbking video is really helpful. Good luck.
Sent from my SPH-L710 using xda app-developers app
kyhassen said:
I thought the i9300 is the sprint version. i had looked it up... but oh well. I did more research i missed one step which may have caused it, or my download corrupted. But my next option is to find someone with a Jtag in my area.
Click to expand...
Click to collapse
Yup you flashed the wrong ROM. I had this happen on my Evo 3D, I don't remember which ROM it was but someone had linked to it from the CDMA forum and I took their word for it being a CDMA ROM. It was GSM. Fortunately I was still able to load hboot and loaded clockwork mod via fast boot. I'm sure you've tried going into download mode or recovery a hundred times by now, but one hundred and one wouldn't hurt. Make sure you are pressing the right buttons in the right combination and letting go at the right time. Honestly I think the SIII is a pain to get into D/L or recovery mode. It always takes me a few tries. If you can do that, you won't need to JTAG it. Good luck!
---------- Post added at 10:41 AM ---------- Previous post was at 10:37 AM ----------
smokeadrians said:
Use a jig. Will boot up into download mode. You need to use Odin and flash stock. Qbking video is really helpful. Good luck.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Ah that's right, he has some really nice instructional videos. Here is his YouTube page. I would also suggest looking him up on XDA.
Http://youtube.com/user/qbking77
smokeadrians said:
Use a jig. Will boot up into download mode. You need to use Odin and flash stock. Qbking video is really helpful. Good luck.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
jig wont work its done for. Only hope is jtag
evo4gnoob said:
jig wont work its done for. Only hope is jtag
Click to expand...
Click to collapse
Thats what i was thinking. i cant even get the thing to turn on.
kyhassen said:
Thats what i was thinking. i cant even get the thing to turn on.
Click to expand...
Click to collapse
these guys do wonders http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
evo4gnoob said:
these guys do wonders http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Click to expand...
Click to collapse
so i have heard. Im gonna look for one near by my area. if not i will use those guys. i have heard they are good form several of you guys here and other sites. thank you. At least i have my Nexus 7 and free txting app lmao. quite a giant cell phone if you ask me...
Q&A is for questions
No one should be vilified for asking a question, in the proper place, after researching - and no one should be made to feel worse than they already do when they've got an expensive paperweight they're trying to resurrect. We were all new once. Have patience and teach - especially to those who really seek to learn from their mistakes.
Bummer! good to see a lot of evo guys making thier way over.
Sent from my SPH-L710 using xda app-developers app
At least the plus side is i got to play stupid and get a replacement for 35$ bucks from sprint. screw that 60 bucks and I get it with in a 2-3 days. this time im gonna make sure i dont flash a i9300 rom lol.... oops
Hello everyone I installed this: gearengine .it/?page_id=2 and now my phone won't boot up... did I install an international rom?
SubduedRhombus said:
Hello everyone I installed this: gearengine .it/?page_id=2 and now my phone won't boot up... did I install an international rom?
Click to expand...
Click to collapse
Yea you did. This is the third post I have posted in. Foxhound is for i9300 devices. This ROM cannot be used on US/Canadian variants. The other two people I posted for also flashed and also hard bricked.
Your only bet is to contact your network provider and see if they will replace it or pay between 60-80 USD for a JTAG resurrection.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
RPelham said:
Yea you did. This is the third post I have posted in. Foxhound is for i9300 devices. This ROM cannot be used on US/Canadian variants. The other two people I posted for also flashed and also hard bricked.
Your only bet is to contact your network provider and see if they will replace it or pay between 60-80 USD for a JTAG resurrection.
Click to expand...
Click to collapse
God I hate myself, I just got this phone today and I can't believe I could be so stupid. Anyway, thanks for the fast reply.
SubduedRhombus said:
God I hate myself, I just got this phone today and I can't believe I could be so stupid. Anyway, thanks for the fast reply.
Click to expand...
Click to collapse
If you just got it, there's no harm in trying to get an exchange. Simply say you woke up and your device no longer boots. It has worked for me in the past, and, reportedly, one of the previous mentioned foxhound victims.
In the future make sure you stick with your devices codename and model number (d2att =ATT, d2tmo = Tmobile, d2spr = Sprint, d2vzw = Verizon). model is i747.
Galaxy S3 is a very touchy device and in my experience very easy to hard brick.
Good luck with your exchange!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Someone help. I flashed a rom and it said the kernel failed to install, I didn't know it would be a problem and rebooted it. Now my phone won't boot at all into download mode, recovery, won't turn on at all.
What ROM was it.
Aerowinder said:
What ROM was it.
Click to expand...
Click to collapse
Miui Rayglobe v6
cman363 said:
Miui Rayglobe v6
Click to expand...
Click to collapse
Link to it or as close as possible. Never heard of it, so I'm going with a brick and need of jtag. But that's unknown til I see qhere the rom came from and what devise it was made for...
After fuether review it was for the i9305 s3, bricked device. Search the 20 threads already about this and jtag.
T-Mobile SGS III
mt3g said:
Link to it or as close as possible. Never heard of it, so I'm going with a brick and need of jtag. But that's unknown til I see qhere the rom came from and what devise it was made for...
After fuether review it was for the i9305 s3, bricked device. Search the 20 threads already about this and jtag.
T-Mobile SGS III
Click to expand...
Click to collapse
Oh it was for the wrong device? Damn so my device is done for?
cman363 said:
Oh it was for the wrong device? Damn so my device is done for?
Click to expand...
Click to collapse
60ish $ and jtag is your option, like I said look it up via google or the many threads on the subject here. Future reference look for roms via it's "ROM name" (D2TMO) or hardware name (T999) never fail to install proper rom.
re: bricked
cman363 said:
Someone help. I flashed a rom and it said the kernel failed to install, I didn't know it would be a problem and rebooted it. Now my phone won't boot at all into download mode, recovery, won't turn on at all.
Click to expand...
Click to collapse
The Miui Rayglobe v6 is not for your device, it's a 9300 rom and your phone is now officially BRICKED
You need to send it to a shop which has JTAG and get it working. It cost between $30 to $60 bucks,
your best bet is to go to eBay and do a search for JTAG the prices there are way less than other places.
Good luck!
Misterjunky said:
The Miui Rayglobe v6 is not for your device, it's a 9300 rom and your phone is now officially BRICKED
You need to send it to a shop which has JTAG and get it working. It cost between $30 to $60 bucks,
your best bet is to go to eBay and do a search for JTAG the prices there are way less than other places.
Good luck!
Click to expand...
Click to collapse
Cause I said none of that?
T-Mobile SGS III
I think that ROM is for the international version of the phone. Probably going to need JTAG repair from mobiletechvideos.
Aerowinder said:
I think that ROM is for the international version of the phone. Probably going to need JTAG repair from mobiletechvideos.
Click to expand...
Click to collapse
FML haha
T-Mobile SGS III
That rom is for the international i9300. Your gonna need to jtag to fix it. Runs around 30-60 bucks. Hahahahaha
Sent from my SGH-T999 using xda app-developers app
that rom is for the international s3, your phone is bricked, you need jtag
next same comment...,
Jtag
Sent from my SGH-T999 using xda premium
re: 9300
cman363 said:
Miui Rayglobe v6
Click to expand...
Click to collapse
Good for you, you have officially BRICKED your phone, that rom is for the 9300 phone not for our T999.
I think before you flash anything else you need to get yourself a pair of reading glasses so you can read
before you flash. LOL
Idk if it has been mentioned, but your phone is bricked. That ROM is for the international S3. You are going to need to use a JTAG service to get the phone fixed which will cost you any where from $30-$100 depending who you use and how fast you want it done.
Sent from my SGH-T999 using xda premium
Haha mtg3 got trolled ..but yeah Jtag it will cost between 30 to 60, thank me I helped lol
Sent from my SGH-T999 using xda app-developers app
I get trolled on here so regularly its like people saying hi to me on the street lol. Doesn't help I'm on here more than most on Facebook.
T-Mobile SGS III
Wow.. just wow lol
Sent from my SGH-T999 using xda premium
mt3g said:
I get trolled on here so regularly its like people saying hi to me on the street lol. Doesn't help I'm on here more than most on Facebook.
T-Mobile SGS III
Click to expand...
Click to collapse
Get Facebook Home and you won't have that problem. I heard it was good.
Aerowinder said:
Get Facebook Home and you won't have that problem. I heard it was good.
Click to expand...
Click to collapse
Lol good sarcasm
Sent from my SGH-T999 using xda app-developers app
Can someone please explain why I bricked my galaxy s3 phone. I have a Samsung galaxy S3 sgh-t999. Phone had a 4.1.1 system and it was rooted. I installed MS Team HD 11.0 from here: http://forum.xda-developers.com/showthread.php?t=1886332 after installation was completed phone asked to reboot and never came back. Black screen and no buttons responding. Was that rom not for my phone? Also that Rom was in the phone memory not SD card.
That would be because you flashed a rom for the i9300 international model not for the t999. It is always important to read read read before diving into things. Sorry to hear your situation.
Sent from my SGH-T999 using Tapatalk 4 Beta
rawdaddymagraden said:
That would be because you flashed a rom for the i9300 international model not for the t999. It is always important to read read read before diving into things. Sorry to hear your situation.
Sent from my SGH-T999 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yep what he said.
Sent from my SGH-T999 using XDA Premium App
rawdaddymagraden said:
That would be because you flashed a rom for the i9300 international model not for the t999. It is always important to read read read before diving into things. Sorry to hear your situation.
Thanks for the reply, Can you point it out Please where exactly I can read for what version it is. I dont see it anywhere. Thanks a lot.
Click to expand...
Click to collapse
Look on the forum directory.
It reads "> Samsung Galaxy S III I9300, I9305 > Galaxy S III Android Development >"
from that we can assume that all posts made in this section are for international S3 devices.
Sud0lit3 said:
Look on the forum directory.
It reads "> Samsung Galaxy S III I9300, I9305 > Galaxy S III Android Development >"
from that we can assume that all posts made in this section are for international S3 devices.
Click to expand...
Click to collapse
Thanks a lot! I will try modding again after fixing the phone.
silver709 said:
Thanks a lot! I will try modding again after fixing the phone.
Click to expand...
Click to collapse
Thats the spirit!!!!
silver709 said:
Thanks a lot! I will try modding again after fixing the phone.
Click to expand...
Click to collapse
mongo41 said:
Thats the spirit!!!!
Click to expand...
Click to collapse
This is why I love XDA everyone here is super nice and super helpful
Sud0lit3 said:
This is why I love XDA everyone here is super nice and super helpful
Click to expand...
Click to collapse
People on XDA are not nice. You happened to get the very small percentage of them that are.
Sent from my SGH-T999 using xda premium
Do you know where to repair your phone from the brick? I recently bricked my s3 flashing the t999v bootloader but luckily for me there's a guy here in Dallas, TX that repaired for $30 he has a listing in ebay
Sent from my SGH-T999 using xda app-developers app
You can either pay to have it jtag or you can just call tmobile and tell them you don't know what happened. You gotta have insurance though. Don't worry about the no warranty fee cause they won't be able to tell anything about the phone in that condition because nothing works lol. ....reason I know is cause I did the same thing to my sprint s3.
tmobile s3 running wicked. I still use a t9 text app so excuse the errors
mobiletechvideos .com
I had my phone hard bricked too, he fixed it for me and everything was great afterwards :]
good luck!
Josh McGrath said:
You can either pay to have it jtag or you can just call tmobile and tell them you don't know what happened. You gotta have insurance though. Don't worry about the no warranty fee cause they won't be able to tell anything about the phone in that condition because nothing works lol. ....reason I know is cause I did the same thing to my sprint s3.
tmobile s3 running wicked. I still use a t9 text app so excuse the errors
Click to expand...
Click to collapse
Thank you so much! I nearly forgot I've been paying handset protection for the last year and a half! I got a phone en route.
Fix
winmx1 said:
mobiletechvideos .com
I had my phone hard bricked too, he fixed it for me and everything was great afterwards :]
good luck!
Click to expand...
Click to collapse
I sent mine to Mobiletechvideos.com as well and they were able to fix it.