How to root micromax a25 and orignal flash file - Upgrading, Modifying and Unlocking

Hello all :
i have this phone and i succesfully rooted this phone so today i am gonna show you how to root micromax a25 smarty
download these tools : file attached
1. Remove battery dont put back and direct. connect the cable to pc and mobile and install driver
2. After install drive remove cable from mobile
3. Start sp-flash-tool with administration permission
4. Select a scatter file (there is in attachment)
5. click on download
6. connect mobile
7. you got an error ...
8. unplug cable from mobile
9. goto option > da download all > and uncheck box
10 . again click on download
11. plug your mobile ..
your mobile now updated with new bootimg
now start mobile .......
plug usb cable
select debugg mode
start SUPER ONE CLICK
click ROOT
succesfully rooted
any problem tell me here ...
all download in one :
drivers, scatter, boot, spflash, super one click
4shared. com /rar/ 6ZfdE3fe/ MICROMAX_A25_root .html

Hey dude,u are on rooting and I have made a custom rom for this phone,check forums, upgrading,modifying etc
2nd page "rom unofficial micromax a25 custom rom made by me "and see the attached pictures

Hey man, I have done it exactly your way, but I cannot get past flashing the unsecure image by SP Flash Tool. I have attached the screenshot for error. Can you suggest a solution?

And when I disable the DA Download all, a new error shows up: Partition size changed. Please help.

Related

CWM recovery for KARBONN A18!!!

CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Good Job done
Built from source or using web builder?
i cant flash this through sp - tool
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits:
I, Me & Myself..
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
while downloading i got the error
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
First Check if the MTK drivers are installed, check it by going tinto the device managers hardware section in my computer
If it is proper then try connecting your phone without the battery inserted
Same problem..
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
i ported this recovery from a ZOPO Z900 Leader chinese android handset...i tried building from source, but i failed at it because of partition style in a18...
For people facing problems flashing it through sp tools, u all can try to flash it using another pc or alternatively view this youtube video -> http://www.youtube.com/watch?v=969xwsUTkSY
ujjwalk308 said:
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
Click to expand...
Click to collapse
Same problem here.
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
vshlkmr said:
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
Click to expand...
Click to collapse
Ok.now waiting for the bugfix.
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
always usb cable error
Connect usb cable & discconet auto & charging mode
this is usb driver ????
great job. im a noob at this so will try after people posting have successfully ported the cwm to their phone
There are two recovery.img files in your attachments. recovery.img and cwmfinal.img. Which one should be used in sp flash tool?
I recently purchased Karbonn a21, can I try this on it?
Sent from my GT-I9300 using xda app-developers app
Thnx bro worked like a charm.
Sent from my Karbonn_A18 using xda app-developers app
fail root
plz send device manager screen shot
Can anyone please upload stock rom of karbonn a18. My device stock at boot animation screen.
Sent from my GT-P1000 using xda premium
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
same problem any help pz
Cwm flashed
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
will you please give CWM for Micromax A90 specification maybe same as A18
here is Specification
Micromax A90
Super Amoled Plus LCD with 262 k
MTK6575 CPU 1 Ghz
512 MB RAM (350 - 400) User available
512 MB ROM ( its not RAM ) for apps
2.5 GB external SD for media file ( Music/Video,,,etc.)
8 Mega Pixel Camera + 0. Mega Pixel Front Camera
Android OS 4.0.3
with Rooted cell
plz help us to create new CWM + Custom ROM
also its same specification from some Chinese Brand like Zoppo / Hero / Gionnee / HDC
plz help.
Pritesh.mohan said:
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
Click to expand...
Click to collapse
You could do that before flashing Cwm aswell.. Use rom toolbox.. I did it the day I got this phone

Micromax A25 Complete Guide (Rooting/Troubleshooting)

How to Root Micromax A25​A25 Root (Modified Boot.img)
A25 USB VCOM Drivers
Android Language Project Tool
SP Flash Tools
Step 1) Download all the files/softwares above.
Step 2) Connect your phone in Power-Off Mode, your system will begin searching for drivers, Manually locate the driver installer to A25_USB_VCOM Folder, wait until it's finished
Step 3) Open SP Flash tools, Load the Scatter File located in the modified boot img folder you've downloaded
Step 4) Click on Options > DA Download All > Disable DA Download All
Step 5) Click on Download Button > Disconnect phone > Reconnect phone > Wait until its finished.
Step 6) Power-on your phone > Enable USB Debugging mode
Step 7) Open Android Language Project > Select Lang Installer Tab > Then Click 4.0< Button on right panel
Step 8) Rooting is complete!
Alternate Rooting Method [May Not Work]
Download CWM Recovery for Micromax A25
Download SuperSu Flashable Zip
1. Place SuperSu Flashable Zip in your memory card.
2. Reboot into recovery mode.
3. Locate to the zip file and Flash it.
4. Reboot.
Troubleshooting​
SP Flash Tool Errors (Fix)
If you're facing any error file flashing with SP Flash Tool, Open Device Manager > Expand Ports > Select MediaTekPreloader.. and Update Driver Software > Browse the Computer > Let me pick.... > Uncheck show Compatible Hardware > Select MTK USB Port in "Model Column" > Press OK > Reboot Computer (Optional) > Reconnect phone > There will be no error in flashing now.
If still some kind of error persists, I've found one way to fix those.
Code:
Download and Flash this file
. This will brick your Micromax A25. Don't worry, after that you'll be able to flash anything you want. It is advised to flash stock rom before flashing any other file.
SIM Related Trouble Shooting/ No Service Problem/ IMEI Problem (Fix)
Code:
IMEI Writing App (NO ROOT REQUIRED)
Use the above app to write the IMEI
If you're facing No Service Problem even after IMEI Writing. This indicates that calibration data on your handset has been erased. You just need to replace the "CALIBRAT" folder with pre-configured Calibrat data and set that folder's permission to 777. Use Rootexplorer or ES File Explorer to edit system files.
Download Calibrat Data
Hello
I have flashed my Micromax A25 with A25_0201_V0370 stock firmware and my IMEI was gone.I replaced the IMEI by copying the MP0B_001 file and setting the permission to rw-rw----. But my phone always shows no service whatever SIM I insert. I have checked according to your post that my "Android Core Apps" is running. Please help me.
Same issue
hafizimtiaz said:
Hello
I have flashed my Micromax A25 with A25_0201_V0370 stock firmware and my IMEI was gone.I replaced the IMEI by copying the MP0B_001 file and setting the permission to rw-rw----. But my phone always shows no service whatever SIM I insert. I have checked according to your post that my "Android Core Apps" is running. Please help me.
Click to expand...
Click to collapse
Hafiz, same issue here, could you fix till last? Any luck?
sktanmoy said:
Hafiz, same issue here, could you fix till last? Any luck?
Click to expand...
Click to collapse
I have sent you an Email. Please check.
*updated the first post*
If you're facing No Service Problem even after IMEI Writing. This indicates that calibration data on your handset has been erased. To restore that, you need to copy/paste/replace system files from a working micromax a25 into your device.
Click to expand...
Click to collapse
Can you please share with us if you have?
Finally fixed No Service Problem/ IMEI Problem. Check the original post
Any solution for Partition size changed error plzz help me bro if u hav solution :angel::angel::angel::angel::angel::angel::angel:
skywalker9969 said:
Any solution for Partition size changed error plzz help me bro if u hav solution :angel::angel::angel::angel::angel::angel::angel:
Click to expand...
Click to collapse
Follow these steps
If you're facing any error file flashing with SP Flash Tool, Open Device Manager > Expand Ports > Select MediaTekPreloader.. and Update Driver Software > Browse the Computer > Let me pick.... > Uncheck show Compatible Hardware > Select MTK USB Port in "Model Column" > Press OK > Reboot Computer (Optional) > Reconnect phone > There will be no error in flashing now.
After doing steps above, open SP flash tools, Load the scatter file -> Format -> Format Whole Flash -> Options -> DA Download All -> Disable download all. Then Download,
DartzXD said:
Follow these steps
If you're facing any error file flashing with SP Flash Tool, Open Device Manager > Expand Ports > Select MediaTekPreloader.. and Update Driver Software > Browse the Computer > Let me pick.... > Uncheck show Compatible Hardware > Select MTK USB Port in "Model Column" > Press OK > Reboot Computer (Optional) > Reconnect phone > There will be no error in flashing now.
After doing steps above, open SP flash tools, Load the scatter file -> Format -> Format Whole Flash -> Options -> DA Download All -> Disable download all. Then Download,
Click to expand...
Click to collapse
Sorry for late reply thank you worked fine
plz help...
DartzXD said:
Follow these steps
If you're facing any error file flashing with SP Flash Tool, Open Device Manager > Expand Ports > Select MediaTekPreloader.. and Update Driver Software > Browse the Computer > Let me pick.... > Uncheck show Compatible Hardware > Select MTK USB Port in "Model Column" > Press OK > Reboot Computer (Optional) > Reconnect phone > There will be no error in flashing now.
After doing steps above, open SP flash tools, Load the scatter file -> Format -> Format Whole Flash -> Options -> DA Download All -> Disable download all. Then Download,
Click to expand...
Click to collapse
but there is no option like mediatek preloader in ports. the only option is standard port over bluetooth 38,40,41....so on.
I guess that's problem with my laptop...but still let me know if anyone can solve it...
sudkm24 said:
but there is no option like mediatek preloader in ports. the only option is standard port over bluetooth 38,40,41....so on.
I guess that's problem with my laptop...but still let me know if anyone can solve it...
Click to expand...
Click to collapse
Install the drivers provided by me. Uninstall your previous drivers.
Step 1) Download all the files/softwares above
Step 2) Connect your phone in Power-Off Mode, your system will begin searching for drivers, Manually locate the driver installer to A25_USB_VCOM Folder, wait until it's finished
Step 3) Open SP Flash tools, Load the Scatter File located in the modified boot img folder you've downloaded
Step 4) Click on Options > DA Download All > Disable DA Download All
Step 5) Click on Download Button > Disconnect phone > Reconnect phone > Wait until its finished.
I am facing problem here on this stage. even i installed drivers manually on my windows7 by removing battery and installed it. but still not showing drivers installation on device manager too. i am too much confused, tell me what to do? i never had any issues in rooting all other devices of my family and friends including my note 1 and note 2, mmx a57, mmx a89, spice mi500, intex cloud z5 all got rooted but this small **** is giving me pain n my ass, lolz help me plssssss what 2 do??
Step 6) Power-on your phone > Enable USB Debugging mode
Step 7) Open Android Language Project > Select Lang Installer Tab > Then Click 4.0< Button on right panel
Step 8) Rooting is complete!
Troubleshooting
1. SP Flash Tool Errors (Fix)
If you're facing any error file flashing with SP Flash Tool, Open Device Manager > Expand Ports > Select MediaTekPreloader.. and Update Driver Software > Browse the Computer > Let me pick.... > Uncheck show Compatible Hardware > Select MTK USB Port in "Model Column" > Press OK > Reboot Computer (Optional) > Reconnect phone > There will be no error in flashing now.
If still some kind of error persists, I've found one way to fix those.
Code:
[URL="http://adfoc.us/10857127354834"]Download and Flash this file[/URL]
. This will brick your Micromax A25. Don't worry, after that you'll be able to flash anything you want. It is advised to flash stock rom before flashing any other file.
2. SIM Related Trouble Shooting/ No Service Problem/ IMEI Problem (Fix)
Code:
[URL="http://adfoc.us/10857127354912"]IMEI Writing App (NO ROOT REQUIRED) - Download Here[/URL]
Use the above app to write the IMEI
If you're facing No Service Problem even after IMEI Writing. This indicates that calibration data on your handset has been erased. I've finally found a way to fix this problem. There's no solution for this problem on entire interent. You just need to replace the "CALIBRAT" folder with pre-configured Calibrat data and set that folder's permission to 777. Use Rootexplorer to edit system files. This fix has been found by myself. You will not get any solution on this problem throughout the whole Internet. Please mention credits to Sanjay Vig whenever you share this fixing method
Download Calibrat Data
Code:
[URL]http://adfoc.us/10857127354960[/URL]
[/CENTER][/QUOTE]
even ur link for bricking mmx a25 is dead. please help me.
http://www.dropbox.com/s/brlrmxsh3a7pbcf/Brick_micromax_a25_by_DartzXD.rar is DEAD
thanks n advance
hafizimtiaz said:
Hello
I have flashed my Micromax A25 with A25_0201_V0370 stock firmware and my IMEI was gone.I replaced the IMEI by copying the MP0B_001 file and setting the permission to rw-rw----. But my phone always shows no service whatever SIM I insert. I have checked according to your post that my "Android Core Apps" is running. Please help me.
Click to expand...
Click to collapse
My phone is on mmx logo what to do.
How can i get to recovery mode?
I have rooted my micromax A25 using eroot and it is properly rooted. Now i cant get into recovery mode in my phone. (vol up + power + home)- doesnt work for me. Even apps like Rom manager, quick boot cant let me to the recovery mode. how can i get to recovery mode?
alttafv said:
I am facing problem here on this stage. even i installed drivers manually on my windows7 by removing battery and installed it. but still not showing drivers installation on device manager too. i am too much confused, tell me what to do? i never had any issues in rooting all other devices of my family and friends including my note 1 and note 2, mmx a57, mmx a89, spice mi500, intex cloud z5 all got rooted but this small **** is giving me pain n my ass, lolz help me plssssss what 2 do??
Click to expand...
Click to collapse
Try doing it on another computer. Can be the problem of your Operating System. Else, try this
Open Device Manager > Expand Ports > Select MediaTekPreloader.. and Update Driver Software > Browse the Computer > Let me pick.... > Uncheck show Compatible Hardware > Select MTK USB Port in "Model Column" > Press OK > Reboot Computer (Optional) > Reconnect phone > There will be no error in flashing now.
After doing steps above, open SP flash tools, Load the scatter file -> Format -> Format Whole Flash -> Options -> DA Download All -> Disable download all. Then Download,
alttafv said:
even ur link for bricking mmx a25 is dead. please help me.
http://www.dropbox.com/s/brlrmxsh3a7pbcf/Brick_micromax_a25_by_DartzXD.rar is DEAD
thanks n advance
Click to expand...
Click to collapse
Links are working fine for me.
raj_ said:
I have rooted my micromax A25 using eroot and it is properly rooted. Now i cant get into recovery mode in my phone. (vol up + power + home)- doesnt work for me. Even apps like Rom manager, quick boot cant let me to the recovery mode. how can i get to recovery mode?
Click to expand...
Click to collapse
Flash Clockwork Mod Recovery.
achopra1999 said:
My phone is on mmx logo what to do.
Click to expand...
Click to collapse
Flash the stock rom.
Hello DartzXD
In need the preconfigured data calibrat from another model of smartphone star h7100w. How can I get it?
Thank you.
fperez76 said:
Hello DartzXD
In need the preconfigured data calibrat from another model of smartphone star h7100w. How can I get it?
Thank you.
Click to expand...
Click to collapse
Is your star h7100w rooted?
DartzXD said:
Is your star h7100w rooted?
Click to expand...
Click to collapse
Yes, It's rooted. I asked for a nvram.bin to the seller for the same model of smartphone.I flashed it and everything ok(Imei. mac address, bar code, bluetooth) but the touch screen still uncalibrated. I erased the calibration data with sp flash tool. Alttafv said "You just need to replace the "CALIBRAT" folder with pre-configured Calibrat data and set that folder's permission to 777" but I don't have the pre-configured Calibrat data and I don't know how to get it for my phone.
Please help.

[COT] Recovery for Micromax A44 Punk

COT recovery For Micromax A44​:victory::highfive::good:
Hi Guys!!
another great news ..... last night i tried to port the stock recovery.img to COT recovery... and it was successful ..... i am very happy that now we have two Recoveries for This Little Device.. and if you own a Micromax A44 punk then your problems about recovery and rooting is solved....
I have already Uploaded the CWMRecovery 6 and fully rooted Stock ROM will be uploaded soon....
You can flash these using the sp flash Tool i have attached on the attachments below....
Now i would like to thank Master Shifu for that amazing tool for COT recovery..... and yuweng.... COT team, CWM team.....:highfive:
What is COT recovery:
Want to know Click here.....:laugh:
HOW To Flash COT Recovery into Your Device:
Now there are two methods one using mobile uncle tool or using the sp flash tool....
1st Method: (Will work Only on Rooted Device if you have already rooted your A44 using unlock root.)
If you have a rooted Device, simply use this mobile uncle tool, put the recovery i provided in the root of your SD Card, download and install Mobile uncle from play store or downlaod from attachments below... install the apk and then everything is easy.... just follow steps...
2nd Method:
Downlaod sp Flash Tool from attachments,
Load scatter file..... browse recovery..... dissconnect your phone from pc/laptop..... remove battery ... put you battery back ,.... do not connect you phone to usb or turn on the battery do not touch any buttons on the phone...... now after loading the recovery.img .. make sure only recovery is ticked and rest are unticked ... if not then untick it yourself.. as we are only going to flash recovery only..... ...
Press download button... a message will appear on the right bottom corner to connect the USB cable in XX seconds... so now connect the USB cable before XX seconds and a progress bar will appear.. let it complete.. and you will see the green circle... close the window and sp flash tool.. and boot into recovery....
You know how to enter into recovery Power + vol up simultaneously ......
Enjoy COT recovery..... with Micromax a44 Punk....
Note: You agree that you are doing this at your own risk...
help i beg u
plz help me im aswin im using mm a44 phone i hv wrongly deleted dialer from app folder &i hv wrongly gaven factory reset now i cant even turn on usb debugging plzz help me :crying:

micromax canvas a1 stuck on boot animation after rooting (android marshmallow)

i updated my canvas a1 to android marshmallow, after that i rooted my device using android one tool kit after rebooting it is stuck on boot screen animation screen.
please help me
Please provide more detail or just describe what you tried and what happened.
its beacuse android m cant be rooted without flashing custom kernel. it goes into bootloop. so first download thnderzap kernel 3.5.zip , flash it and then download supersu.zip and flash it. then it will 100%work.
How to install custom recovery in a handset that is bootlooping?
Please tell us the procedure
Boot in fastboot mode and flash recovery from there .
aaqib846 said:
i updated my canvas a1 to android marshmallow, after that i rooted my device using android one tool kit after rebooting it is stuck on boot screen animation screen.
please help me
Click to expand...
Click to collapse
STEP 1: DOWNLOAD the FLASH TOOL from this this link :LINK TO DOWNLOAD FILE
It is almost 30 MB in Size. And EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) of your computer.
STEP 2: DOWNLOAD LOLLIPOP FLASH FILE
DOWNLOAD LINK FOR LOLLIPOP: HERE
After downloading this flash file EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) on your computer.
STEP 3: NOW INSTALL DRIVERS:
YOU NEED TO BE ON WINDOWS 7 TO INSTALL DRIVERS (WINDOWS 8 DOESN'T SUPPORT THIS DRIVER / PHONE IS NOT DETECTED)
DOWNLOAD DRIVERS from this link : HERE
EXTRACT AND INSTALL THE DRIVERS : Next next next and finish If you see an security warning ( a red coloured pop up ) choose INSTALL IT ANYWAY
IT IS RECOMMENDED YOU TO RESTART YOUR PC.
STEP 4:
Now we have Extrated /unziped 2 files. One is FLASHTOOLS and other is FLASH FILE and Extracted it or unziped it to Desktop or Somewhere.
One of it having the name SP_Flash_Tool_exe_windows_v5.1424.00 or open both folders then one of it having the flashing tool. OPEN THE FOLDER NAMED SP_Flash_Tool_exe_windows_v5.1424.00
it contains an application named fashtool.exe OPEN IT
NOW THE APPLICATION IS ASKING FOR SCATTER LOADING FILE
its a txt file which is on the extracted flash file folder
BROWSE it by clicking Button named Scatter Loading
click OPEN
STEP 5:
HERE IN THE DROPDOWN BOX, IT SAYS DOWNLOAD ONLY, CLICK ON IT AND SELECT FIRMWARE UPDATE ONLY.
IF YOU SELECT FORMAT + DOWNLOAD, THEN YOU WILL LOOSE IMEI NUMBER.
NOW CLICK DOWNLOAD BUTTON ( GREEN ARROWED BUTTON NAMED DOWNLOAD )
IN CASE YOU LOOSE IMEI NUMBER, THEN REFER HERE
STEP 6:
Now SWITCH OFF your PHONE and REMOVE BATTERY
STEP 7:
CONNECT your PC via USB CABLE
wait for the driver Detection.
THE FLASHING PROCESS WILL START AUTOMATICALLY you can See the progress in progress bar which is on bottom of flashing tool Application.
WHEN IT IS FINISHED DISCONNECT USB AND RESTART YOUR PHONE.
NOW YOU WILL GET LOLLIPOP UPDATE IMMEDIATELY.
NOW REFER HERE TO ROOT MARSHMALLOW
:good::good:HIT THANKS IF HELPED:good::good:
Hello friend, I followed the steps in above instructions. But after clicking download, nothing happens. I have installed all the drivers but my phone is not detecting when battery is removed. Can you help please ....
Best answer :
aaqib846 said:
i updated my canvas a1 to android marshmallow, after that i rooted my device using android one tool kit after rebooting it is stuck on boot screen animation screen.
please help me
Click to expand...
Click to collapse
Hey dude you can try this awesome way
1st install a custom recovery
2nd download CyanogenMod (avialable cm13 android version 6.0.1) from YouTube or Google
3rd download gapps for android 6 from xda developers
4th boot into recovery mode
5th wipe user data
6th wipe cache partition
7th install zip 1st CM 13
Then 2nd Gapps
8th reboot system now
Enjoy the CM13 official ROM on A1
Root access in Inbuilt
For root access :
1st go to settings
2nd go to about phone
3rd enable developer options by tapping built number 7times
4th back in developer options enable root access.
Enjoy...
canvas a1 stuck at boot animation
i flashed my a1 using sp flash it was successful. but now when i switch on my phone its stuck at animation

100%&100% working ROOT TWRP Recovery & bootloop restart solution LeTV Le1s x507&x509

100%&100% working ROOT TWRP Recovery & bootloop restart solution LeTV Le1s x507&x509
TWRP Recovery & root & bootloop restart
solution LeTV Le1s x507&x509 Indian Version
No more brick and bootloop problem
100%tested solution 8s&14s​
New Method added
18/05/2016
Backup all internal storage
install pdanet and preloder driver​https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
http://pdanet.co/a/​
restart pc
Download new Rar file​https://drive.google.com/file/d/0B5KBP3GG99Q2aU1wNnYwakliUHM/view?usp=sharing?​Extract folder Desktop
Go to mobile settings >> About Phone >>
tap Version 7 Times and hit back
U will have a new option just
above the About Phone option called Developer Options
open it and select USB Debugging
Connect the mobile with pc through USB cable
how to unlock bootloder
duble click recovery bat press any key to enter fastboot mode
After it Reboots
close cmd.exe
press shift+right click select open command windows here
Type fastboot oem unlock HIT ENTER
press volume up confirm NOW THE BOOTLOADER IS UNLOCKED
how to install recovery
duble click recovery bat
press A key to Flash recovery img
again press a akey
switch off the mobile press 10 second power key
now mobile is boot loop
dont worry
open sp tool and flash user data
connect ur mobile Screen blank condition and wait for the process to finish
done
Remove usb cable
Most important
after flash userdata dont power on mobile
press volume up+power
first boot
leave both key showing letv logo
How To root
Start the mobile open twrp folder copy the Superuser.zip file to memory
Go to updater app and select reboot to recovery
select Install select superuser.zip swipe to install
done
Q.I completed the procedure as mentioned in tutorial, everything goes well even sptool download, but when I boot to recovery mode to install supersu the phone boots to stock recovery mode and not the twrp mode. Tried atlest ten times but same problem. How I can boot to twrp mode
Answer .after flash userdata dont power on mobile
press volume up+power first boot
leave both key showing letv logo
Video tutorial​​https://www.youtube.com/watch?v=v9X-a1DmU-g​
naeem210 said:
TWRP Recovery & root & bootloop restart
solution LeTV Le1s x507 Indian Version
No more brick and bootloop problem
100%tested solution
New Method added
24/04/2015
Twrp.3.0
Backup all internal storage
install pdanet and preloder driver
https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
http://pdanet.co/a/
Download new Twrp Rar file
https://drive.google.com/file/d/0B5KBP3GG99Q2NUpJSGVhWlB3X1E/view
Extract twrp folder Desktop
Go to mobile settings >> About Phone >>
tap Version 7 Times and hit back
U will have a new option just
above the About Phone option called Developer Options
open it and select USB Debugging
Connect the mobile with pc through USB cable
duble click recovery bat press any key to enter fastboot mode
After it Reboots
close cmd.exe
press shift+right click select open command windows here
Type fastboot oem unlock HIT ENTER
press volume up confirm NOW THE BOOTLOADER IS UNLOCKED
duble click recovery bat
press A key to Flash recovery img
again press a akey
switch off the mobile press 10 second power key
now mobile is boot loop
dont worry
open sp tool and flash user data
connect ur mobile Screen blank condition and wait for the process to finish
done
How To root
Start the mobile open twrp folder copy the Superuser.zip file to memory
Go to updater app and select reboot to recovery
select Install select superuser.zip swipe to install
done
Video tutorial
http://forum.le.com/in/index.php?th...-solution-letv-le1s-x507-new-method-add.1155/
Click to expand...
Click to collapse
Working!! Thanx
Hi , The Sp Tool does not show any progress at all.
I watched the video , connected the phone while it was blank , still SP tool remains stuck in Download forever and the phone keep looping.
Please help thanks
I tied in Windows 10 as well as Windows 7 64bit
csifreeman said:
Hi , The Sp Tool does not show any progress at all.
I watched the video , connected the phone while it was blank , still SP tool remains stuck in Download forever and the phone keep looping.
Please help thanks
I tied in Windows 10 as well as Windows 7 64bit
Click to expand...
Click to collapse
Nevermind, I used the new method you posted , which was x509 and it worked.
Thanks
compatible with Le 1s Eco?
will this method work with LeEco Le 1s Eco version - Le X509 aswell?
Can u give me stock recovery.img please of le eco 1s x509
can install on x501?
strangely i didnt have to flash the user data..maybe because i am in official marshmallow rom
By unlocking bootloader waranty will void?
What is the new method?
csifreeman said:
Nevermind, I used the new method you posted , which was x509 and it worked.
Thanks
Click to expand...
Click to collapse
What is the new method? As my phone is bricked after I used thus now can't do anything, any advice please.
If any one have le 1s related problem and solution or any one want to try new rom or kernal asap then all of u are welcome in our group on telegram so plz join with us
Requriemt
1. Download telegram from play store
2. Just click below link
https://telegram.me/LeSuperGroup
Thanks all of u
otg support or not tell me fast ?????
Twrp
How to install Twrp in letv le1s x507 Android 5.0.2 (Eui 5.5.008S?
Prabhmeet13 said:
How to install Twrp in letv le1s x507 Android 5.0.2 (Eui 5.5.008S?
Click to expand...
Click to collapse
If u want to use custom ROM or Chinese version upgraded version of ROM then u have to upgrade you official ROM version from lollipop to marshmallow (eui 19s) if you don't want to do that and happy with lollipop ROM and stick with it then u have to install kingroot app for rooting mobile ROM
Then install twrp app or fleasify from ply store
Then download twrp version 2.8.6or7 or otherwise 3.0.2
Image file
If you use twrp official app then find with code name x3 (le 1s eco) then application demand u certain permission then do so rest app can do automatically
If u use fleashify then download official twrp image file rename it to recovery. Img. And place such file into ur SD card or internal storage openly (not put such file into any folder )
Rest process can do the app itsalf if you open the app just follow procedure as app demand u
If u have any problem in above process just search in you tube
You can find both app application process
Thanks for read out such long post
sumitgp said:
If u want to use custom ROM or Chinese version upgraded version of ROM then u have to upgrade you official ROM version from lollipop to marshmallow (eui 19s) if you don't want to do that and happy with lollipop ROM and stick with it then u have to install kingroot app for rooting mobile ROM
Then install twrp app or fleasify from ply store
Then download twrp version 2.8.6or7 or otherwise 3.0.2
Image file
If you use twrp official app then find with code name x3 (le 1s eco) then application demand u certain permission then do so rest app can do automatically
If u use fleashify then download official twrp image file rename it to recovery. Img. And place such file into ur SD card or internal storage openly (not put such file into any folder )
Rest process can do the app itsalf if you open the app just follow procedure as app demand u
If u have any problem in above process just search in you tube
You can find both app application process
Thanks for read out such long post
Click to expand...
Click to collapse
when i boot in recovery only show LETV logo and after automatically reboot phone normally i didn't see any recovery in my phone what can i do?
Im not able to flash user data.. actually i unlocked bootloader in my le1s and wen im clicking on boatloder option in twrp it shows device verification failed ur device might work impropely..not able to flash userdata in sp tool option kindly guide me
Sent from my Le X507 using Tapatalk
asif2017 said:
Im not able to flash user data.. actually i unlocked bootloader in my le1s and wen im clicking on boatloder option in twrp it shows device verification failed ur device might work impropely..not able to flash userdata in sp tool option kindly guide me
Click to expand...
Click to collapse
Bro just PM to naneem bro
Just go to 1st page of this trend and click on naeem profile u found PM tab
brom error s_brom_download_da_fail (2004)
nice
Kk

Categories

Resources