Related
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Good Job done
Built from source or using web builder?
i cant flash this through sp - tool
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits:
I, Me & Myself..
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
while downloading i got the error
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
First Check if the MTK drivers are installed, check it by going tinto the device managers hardware section in my computer
If it is proper then try connecting your phone without the battery inserted
Same problem..
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
i ported this recovery from a ZOPO Z900 Leader chinese android handset...i tried building from source, but i failed at it because of partition style in a18...
For people facing problems flashing it through sp tools, u all can try to flash it using another pc or alternatively view this youtube video -> http://www.youtube.com/watch?v=969xwsUTkSY
ujjwalk308 said:
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
Click to expand...
Click to collapse
Same problem here.
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
vshlkmr said:
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
Click to expand...
Click to collapse
Ok.now waiting for the bugfix.
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
always usb cable error
Connect usb cable & discconet auto & charging mode
this is usb driver ????
great job. im a noob at this so will try after people posting have successfully ported the cwm to their phone
There are two recovery.img files in your attachments. recovery.img and cwmfinal.img. Which one should be used in sp flash tool?
I recently purchased Karbonn a21, can I try this on it?
Sent from my GT-I9300 using xda app-developers app
Thnx bro worked like a charm.
Sent from my Karbonn_A18 using xda app-developers app
fail root
plz send device manager screen shot
Can anyone please upload stock rom of karbonn a18. My device stock at boot animation screen.
Sent from my GT-P1000 using xda premium
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
same problem any help pz
Cwm flashed
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
will you please give CWM for Micromax A90 specification maybe same as A18
here is Specification
Micromax A90
Super Amoled Plus LCD with 262 k
MTK6575 CPU 1 Ghz
512 MB RAM (350 - 400) User available
512 MB ROM ( its not RAM ) for apps
2.5 GB external SD for media file ( Music/Video,,,etc.)
8 Mega Pixel Camera + 0. Mega Pixel Front Camera
Android OS 4.0.3
with Rooted cell
plz help us to create new CWM + Custom ROM
also its same specification from some Chinese Brand like Zoppo / Hero / Gionnee / HDC
plz help.
Pritesh.mohan said:
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
Click to expand...
Click to collapse
You could do that before flashing Cwm aswell.. Use rom toolbox.. I did it the day I got this phone
Introduction :
Hey Guys so we successfully extracted the 4.4.2 stock ROM, Rooted it and Uploaded!
1st Let's Begin with How To ROOT and Flash Recovery on your XOLO Q1010i (works on both JB & KK)
Downloads:
-MTK USB Drivers (HERE)
- MT6582 Scatter File (HERE)
-NEW CTR Recovery by Chirag Jain for Q1010i Only (HERE)
-SP Flash Tools v3.1352.01 (5.1352.01) (HERE)
-SuperSu Zip (Download and Move it to your SD Card) (HERE)
Instructions:
PS - Place all Downloaded Files in the same Place for Easy Access (See Attachment For Screenshots)
Step 1: Install The MTK USB Drivers on Your PC by Clicking on Install.bat
If it Doesn't work See THIS
Step 2: Open SP Flash Tools folder and click on flash_tool.exe (See Attachment For Screenshots)
Step 3: In The Flash Tool window Click on Scatter-Loading, Select MT6582_Android_Scatter.txt and Press Open (See Attachment For Screenshots)
Step 4: In Flash Tool Window Check (Tick) RECOVERY and Click on the Blank Green Space Beside It and select Recovery.img (See Attachment For Screenshots)
Step 5: Press on Download Button at Top, Switch Off Your Device and Connect it to your PC (See Attachment For Screenshots)
Step 6: The Below Bar will Change it's Color Red Then Yellow and Finally show a Download OK Dialog Box (See Attachment For Screenshots)
Step 7: Now Disconnect Your Phone, Close Flash tools, Press and Hold Volume UP and Power Button Together till it powers UP
Step 8: It'll take you to Recovery Mode, In it Press Install Zip ---> Choose Zip SDCard ---> Select the SuperSu.zip You Placed Earlier in Your SDCard and Press YES Install
Step 9: On Complete Installation, Reboot Your Device, CONGRATULATIONS !!!! You've Successfully ROOTED and Flashed Recovery on Your Device !!!
Note:
If SP Flash Tools Shows You PMT Error Just Download the Preloader.bin From (HERE) and Flash it along with the Recovery through Sp Tools
Procedure is same You'll Just have to tick Preloader option and Load Preloader.bin also
Credits:
Chirag Jain For Porting CTR v2.2 Recovery for XOLO Q1010i
Nishan Goswami For Testing
Chainfire For Making SuperSu
Mediatek For SP Flash Tools
Here's How ROOT and Flash Recovery on Your Phone Without Touching Your PC
Instructions:
-Download and Install Framaroot( v1.9.1 Tested to be Working !!!) HERE
-Open The App and Select SuperSu from Dropdown Menu and press Bahahir,It'll be ROOTED!!!
-Download and Install Mobile Uncle tools From Play Store (HERE)
-Download CTR v2.2 Recovery.img (HERE) and place it in your SDCard Directly (Don't place it inside any Folder)
-Open Mobile Uncle Tools, Select Recovery update, Select Recovery.img From there, Press OK And Then Reboot into Recovery Mode !!!
DONE!!! You've Successfully Flashed Recovery on Your Device!!!
KK users follow this for Rooting without PC
Step 1: Root Your Device
Android 4.4.x
Download Rooting Package (HERE)
The Package contains KingRoot, SuperSu and ES File Explorer
PS- Make sure to turn off data/WiFi while Rooting
Steps:
1. Download the Package and Install Kingroot App from there
2. Open the App and Press on the Green Button on It
3. When A Tick Mark Shows , It means you’re Rooted!!!
STEP 2: Flash Recovery on your device
-Find Custom Recovery (HERE) for your Device
-Download Rashr from Play Store
-Place downloaded recovery.img on your SDCARD
-Open Rashr and Select Recovery from Storage
-In that menu select the .img file and Select Yes, please
--Now Reboot to Recovery
-And You’re done!!!
Flashing Q1010i (4.4.2-KitKat Stock ROM through Recovery
Here's HOW To Flash 4.4.2 Stock ROM Through Recovery (JB n KK)
Instructions
-Make Sure You've Flashed CTR Recovery on Your Device (See Post 1 & 2 for More Details)
-Download Flashable Zip of Stock 4.4.2 ROM from (HERE)
-Download SuperSu Zip from (Here)
-Place Both the Files in Your SD Card, Goto Recovery Mode
-In Recovery Mode Go To Install ---> Install from SD ----> Select the ROM File and press YES to Flash it and Do the Same for the SuperSu Zip after Flashing completes
-Reboot and Enjoy !!!
Credits:
Ritesh Nair for the Stock 4.4.2 Zip
Download links
hi,
i have updated mine to kitkat and can not gain root access
can you upload the recovery and rom pls
HOW To Flash Stock ROM on Your Device Through SP TOOLS
Here's HOW To Flash Stock ROM on Your Device Through SP TOOLS
Requirements:
-SP TOOLS v5.1352.01 (DOWNLOAD HERE)
-STOCK ROM For Your Device (4.4.2 KitKat ROM HERE) (4.2.2 Jelly BeanROM HERE)
-MTK USB Drivers (HERE)
-A PC with Windows 7 or Later
Instructions:
-Download and Extract the Stock ROM you Downloaded Above
-Download and Install the MTK USB Drivers from Above
-Extract SP TOOLs and Run Flash_tool.exe
-In the SP TOOLs Window Select Scatter Loading and Select MT6582_Android_scatter.txt Found in the Stock ROM folder you Just Extracted
-Press Download Button on the Top, Switch OFF and Connect Your Device to the PC
-The Flashing Will Start and You'll see Thew Bottom Status bar changing Color from Red, Purple to Yellow, Once Flaching is Complete You'll see a Download OK Dialog Box
-Now Disconnect your Phone and Power it Up!!!!
Thread Updated
Sent from my C2305 using Tapatalk
Thread Updated !!!!
Not working
bgos10 said:
Introduction :
Hey Guys so we successfully extracted the 4.4.2 stock ROM, Rooted it and Uploaded!
1st Let's Begin with How To ROOT and Flash Recovery on your XOLO Q1010i (works on both JB & KK)
Downloads:
-MTK USB Drivers (HERE)
-MT6582 Scatter File (HERE)
-CTR Recovery by Chirag Jain for Q1010i Only (HERE)
-SP Flash Tools v3.1352.01 (5.1352.01) (HERE)
-SuperSu Zip (Download and Move it to your SD Card) (HERE)
Instructions:
PS - Place all Downloaded Files in the same Place for Easy Access (See Attachment For Screenshots)
Step 1: Install The MTK USB Drivers on Your PC by Clicking on Install.bat
If it Doesn't work See THIS
Step 2: Open SP Flash Tools folder and click on flash_tool.exe (See Attachment For Screenshots)
Step 3: In The Flash Tool window Click on Scatter-Loading, Select MT6582_Android_Scatter.txt and Press Open (See Attachment For Screenshots)
Step 4: In Flash Tool Window Check (Tick) RECOVERY and Click on the Blank Green Space Beside It and select Recovery.img (See Attachment For Screenshots)
Step 5: Press on Download Button at Top, Switch Off Your Device and Connect it to your PC (See Attachment For Screenshots)
Step 6: The Below Bar will Change it's Color Red Then Yellow and Finally show a Download OK Dialog Box (See Attachment For Screenshots)
Step 7: Now Disconnect Your Phone, Close Flash tools, Press and Hold Volume UP and Power Button Together till it powers UP
Step 8: It'll take you to Recovery Mode, In it Press Install Zip ---> Choose Zip SDCard ---> Select the SuperSu.zip You Placed Earlier in Your SDCard and Press YES Install
Step 9: On Complete Installation, Reboot Your Device, CONGRATULATIONS !!!! You've Successfully ROOTED and Flashed Recovery on Your Device !!!
Credits:
Chirag Jain For Porting CTR v2.2 Recovery for XOLO Q1010i
Nishan Goswami For Testing
Chainfire For Making SuperSu
Mediatek For SP Flash Tools
Click to expand...
Click to collapse
I tested it and it is not working for me when I try to download it gives me an error that PMT is changed for this ROM and must be downloaded. Any fix for this?
---------- Post added at 06:32 AM ---------- Previous post was at 06:30 AM ----------
bgos10 said:
Here's HOW To Flash Stock ROM on Your Device Through SP TOOLS
Requirements:
-SP TOOLS v5.1352.01 (DOWNLOAD HERE)
-STOCK ROM For Your Device (4.4.2 KitKat ROM HERE) (4.2.2 Jelly BeanROM HERE)
-MTK USB Drivers (HERE)
-A PC with Windows 7 or Later
Instructions:
-Download and Extract the Stock ROM you Downloaded Above
-Download and Install the MTK USB Drivers from Above
-Extract SP TOOLs and Run Flash_tool.exe
-In the SP TOOLs Window Select Scatter Loading and Select MT6582_Android_scatter.txt Found in the Stock ROM folder you Just Extracted
-Press Download Button on the Top, Switch OFF and Connect Your Device to the PC
-The Flashing Will Start and You'll see Thew Bottom Status bar changing Color from Red, Purple to Yellow, Once Flaching is Complete You'll see a Download OK Dialog Box
-Now Disconnect your Phone and Power it Up!!!!
Click to expand...
Click to collapse
So is this Stock ROM is pre-rooted? or just pure stock ROM? because above rooting method is not working for me so I can try this one.
XenonTNT said:
I tested it and it is not working for me when I try to download it gives me an error that PMT is changed for this ROM and must be downloaded. Any fix for this?
---------- Post added at 06:32 AM ---------- Previous post was at 06:30 AM ----------
So is this Stock ROM is pre-rooted? or just pure stock ROM? because above rooting method is not working for me so I can try this one.
Click to expand...
Click to collapse
4.4.2 is rooted, 4.2.2 is not
Sent from my C2305 using Tapatalk
I got the fix while mobile is switch off we need to press volume up + power button after download button is pressed in sp tool to start downloading in mobile. Also to root on KitKat we need preloader file of kitkat also. So kindly upload it for other users I am downloading whole KitKat stock ROM.
The recovery does not seem to get flashed on JB stock rom. I tried with mobileuncletools...
it says reboot into recovery mode but simply restarts. may be working on kitkat but i have not tried. actually i did not really like the kitkat update. It takes away backup and restore app. and in exchange you get printing support and news widget which never gets the location. also messes up with Mifileexplorer and apex launcher. i have flashed TWRP and after taking backup of stock rom i can play with the kitkat update maybe...
thanks for the effort.
Thread Updated, now tested multiple times and new ctr recovery link added
please root xolo q1000 opus kitkat
q1000 opus is different from q1000.
q1000 opus has broadcom processor.
please root the kitkat build as the jb is rooted but kitkat has not been rooted by any dev
Help.. I'm still geting PMT error.. I also load prelaoder bin along with recovery.. But getting error.. Help .
My phone is rooted kitkat(4.4.2) ..i also pressed volume up and power button.. [emoji37][emoji24]
Sent from my Q1010i using Tapatalk
which is the most reliable method of rooting
framaroot or this method????
Root
Reconfigured said:
which is the most reliable method of rooting
framaroot or this method????
Click to expand...
Click to collapse
Farmaroot will not work after Kit Kat upadate. If you have stock Jelly Bean then use farmaroot method.
If you want rooted kitkat use this method.
Does not work on Xolo Q1010i with Android 4.4.2
bgos10 said:
Introduction :
Hey Guys so we successfully extracted the 4.4.2 stock ROM, Rooted it and Uploaded!
1st Let's Begin with How To ROOT and Flash Recovery on your XOLO Q1010i (works on both JB & KK)
Downloads:
-MTK USB Drivers (HERE)
- MT6582 Scatter File (HERE)
-NEW CTR Recovery by Chirag Jain for Q1010i Only (HERE)
-SP Flash Tools v3.1352.01 (5.1352.01) (HERE)
-SuperSu Zip (Download and Move it to your SD Card) (HERE)
Instructions:
PS - Place all Downloaded Files in the same Place for Easy Access (See Attachment For Screenshots)
Step 1: Install The MTK USB Drivers on Your PC by Clicking on Install.bat
If it Doesn't work See THIS
Step 2: Open SP Flash Tools folder and click on flash_tool.exe (See Attachment For Screenshots)
Step 3: In The Flash Tool window Click on Scatter-Loading, Select MT6582_Android_Scatter.txt and Press Open (See Attachment For Screenshots)
Step 4: In Flash Tool Window Check (Tick) RECOVERY and Click on the Blank Green Space Beside It and select Recovery.img (See Attachment For Screenshots)
Step 5: Press on Download Button at Top, Switch Off Your Device and Connect it to your PC (See Attachment For Screenshots)
Step 6: The Below Bar will Change it's Color Red Then Yellow and Finally show a Download OK Dialog Box (See Attachment For Screenshots)
Step 7: Now Disconnect Your Phone, Close Flash tools, Press and Hold Volume UP and Power Button Together till it powers UP
Step 8: It'll take you to Recovery Mode, In it Press Install Zip ---> Choose Zip SDCard ---> Select the SuperSu.zip You Placed Earlier in Your SDCard and Press YES Install
Step 9: On Complete Installation, Reboot Your Device, CONGRATULATIONS !!!! You've Successfully ROOTED and Flashed Recovery on Your Device !!!
Note:
If SP Flash Tools Shows You PMT Error Just Download the Preloader.bin From (HERE) and Flash it along with the Recovery through Sp Tools
Procedure is same You'll Just have to tick Preloader option and Load Preloader.bin also
Credits:
Chirag Jain For Porting CTR v2.2 Recovery for XOLO Q1010i
Nishan Goswami For Testing
Chainfire For Making SuperSu
Mediatek For SP Flash Tools
Click to expand...
Click to collapse
I tried the step mentioned above more than couple of times but it does not work
just a stupid question,,,does all mt6582 chopset device have the same scatter file,,,even in different phone brands?
kimerika said:
just a stupid question,,,does all mt6582 chopset device have the same scatter file,,,even in different phone brands?
Click to expand...
Click to collapse
Ya unless the scatter is modified manually
I successfully rooted my phone. Thanks a lot. I wanted to change my phone's font cause I got bored of same old font.
Sent from my Q1010i using Tapatalk
@mohsin.r.munshi Already Created thread in android development section about stock rom. But he is not mentioned installation method for noobs So I setup new thread.
Hello Developers.
Pre-Requisite:
1. http://goo.gl/aGMN8e
2. http://goo.gl/tczCMx
Downloads:
1. http://goo.gl/79N7u7
Installation Method: [With SP flash tool]
Before proceeding further please make a backup of your device with CWM Recovery or MTKDroid Tools.
Step 1 :- Firstly Download and Install USB Drivers in your PC from the download Section Below.
Step 2 :- Now Download Main ROM Zip and SP Flash Tools.
Step 3 :- After downloading Extract Them Into A Separate Folder into your PC. [Please Turn off Your Anti-Virus During The Process For Some Time.]
Step 4 :- Now Switch-Off You Canvas A1 , Remove Battery & Re-Insert It to Ensure that its Properly Switched Off.
Step 5 :- Next Open SP-Flash Tools From The Same Extracted Folder.
Step 6 :- Now click Click Scatter Loading & Select The ‘MTTK65XX_Scatter.txt‘ From The Directory Where you extracted the Main ROM.
Step 7 :- Hit the Download button and SP Flash Tools will start searching for your device.
Step 8 :- Now connect your device with a USB Cable in the switch off mode.
Step 9 :- Your device will be detected by SP Flash Tools and Upgrade Process will start.
Step 10 :-The process will complete in 3-4 minutes and then a success popup will appear, now disconnect your phone reinsert its battery and power it on.
That’s it, FIrst boot will take about 4-5 minutes wait for it and enjoy stock Experience. :laugh:
And the Phone is as good as new
archies20 said:
@mohsin.r.munshi Already Created thread in android development section about stock rom. But he is not mentioned installation method for noobs So I setup new thread.
Hello Developers.
Pre-Requisite:
1. http://goo.gl/aGMN8e
2. http://goo.gl/tczCMx
Downloads:
1. http://goo.gl/79N7u7
Installation Method: [With SP flash tool]
Before proceeding further please make a backup of your device with CWM Recovery or MTKDroid Tools.
Step 1 :- Firstly Download and Install USB Drivers in your PC from the download Section Below.
Step 2 :- Now Download Main ROM Zip and SP Flash Tools.
Step 3 :- After downloading Extract Them Into A Separate Folder into your PC. [Please Turn off Your Anti-Virus During The Process For Some Time.]
Step 4 :- Now Switch-Off You Canvas A1 , Remove Battery & Re-Insert It to Ensure that its Properly Switched Off.
Step 5 :- Next Open SP-Flash Tools From The Same Extracted Folder.
Step 6 :- Now click Click Scatter Loading & Select The ‘MTTK65XX_Scatter.txt‘ From The Directory Where you extracted the Main ROM.
Step 7 :- Hit the Download button and SP Flash Tools will start searching for your device.
Step 8 :- Now connect your device with a USB Cable in the switch off mode.
Step 9 :- Your device will be detected by SP Flash Tools and Upgrade Process will start.
Step 10 :-The process will complete in 3-4 minutes and then a success popup will appear, now disconnect your phone reinsert its battery and power it on.
That’s it, FIrst boot will take about 4-5 minutes wait for it and enjoy stock Experience. :laugh:
And the Phone is as good as new
Click to expand...
Click to collapse
Reserved!!
archies20 said:
Reserved!!
Click to expand...
Click to collapse
this won't work either .. u missing key points ..
Faiyaz5yaz said:
this won't work either .. u missing key points ..
Click to expand...
Click to collapse
what do u mean??
Some guys here are only for time pass so don't worry .
I have used this . worked for me
After stock u need to relock OEM if unlocked ...
Fastboot ur phone and did the same adb and fastboot files type this in cmd
Fastboot OEM lock
Sent from my Micromax AQ4501 using XDA Free mobile app
archies20 said:
what do u mean??
Click to expand...
Click to collapse
Some beings come here only to promote their websites,!!!!
And by the way ,
You must have unlocked bootloader to flash this stock rom.. you can never flash this rom on a locked bootloader.. Infact the process will never start!!!
And the op has updated now After i tested and confirmed ..
And also The bootloader gets locked Automatically..!!!
i want this thread to b clean Nd hope u update the op mentioning about the need for unlocked bootloaders..
.
.
.
.
i can still hear few beings barking even after being warned!!
@archies20 I would suggest you to delete this thread and start a new thread with updated OP..
you can see How your thread is being spoiled by few kids...
Am tired of complaining to moderators about these kids..
All the best for your new thread = )
Download links are dead please add new.....
short google url not opening
short google url not opening please help,i want to download the stock rom and i cant
nicely summarised. I flashed stock rom yesterday without any problems at all. Now on 5.1 Phillipines ROM
just one tip : If you want to relock OEM and regain warranty select firmware upgrade option in SP flash tools
not working iam on lollipop
thanx
good work sir keep it up... its working soloution
DOwn ._.
archies20 said:
@mohsin.r.munshi Already Created thread in android development section about stock rom. But he is not mentioned installation method for noobs So I setup new thread.
Hello Developers.
Pre-Requisite:
1. http://goo.gl/aGMN8e
2. http://goo.gl/tczCMx
Downloads:
1. http://goo.gl/79N7u7
Installation Method: [With SP flash tool]
Before proceeding further please make a backup of your device with CWM Recovery or MTKDroid Tools.
Step 1 :- Firstly Download and Install USB Drivers in your PC from the download Section Below.
Step 2 :- Now Download Main ROM Zip and SP Flash Tools.
Step 3 :- After downloading Extract Them Into A Separate Folder into your PC. [Please Turn off Your Anti-Virus During The Process For Some Time.]
Step 4 :- Now Switch-Off You Canvas A1 , Remove Battery & Re-Insert It to Ensure that its Properly Switched Off.
Step 5 :- Next Open SP-Flash Tools From The Same Extracted Folder.
Step 6 :- Now click Click Scatter Loading & Select The ‘MTTK65XX_Scatter.txt‘ From The Directory Where you extracted the Main ROM.
Step 7 :- Hit the Download button and SP Flash Tools will start searching for your device.
Step 8 :- Now connect your device with a USB Cable in the switch off mode.
Step 9 :- Your device will be detected by SP Flash Tools and Upgrade Process will start.
Step 10 :-The process will complete in 3-4 minutes and then a success popup will appear, now disconnect your phone reinsert its battery and power it on.
That’s it, FIrst boot will take about 4-5 minutes wait for it and enjoy stock Experience. :laugh:
And the Phone is as good as new
Click to expand...
Click to collapse
please update the link thy seems to be down
Battery nikla ke flash kar na h??????
Sent from my Micromax AQ4501 using XDA Free mobile app
galileo_24 said:
nicely summarised. I flashed stock rom yesterday without any problems at all. Now on 5.1 Phillipines ROM
just one tip : If you want to relock OEM and regain warranty select firmware upgrade option in SP flash tools
Click to expand...
Click to collapse
Thanks it helped me a lot.
flashing done ....but power on not working ......please help
---------- Post added at 02:04 PM ---------- Previous post was at 02:03 PM ----------
dsk197 said:
please update the link thy seems to be down
Click to expand...
Click to collapse
flashing done ....but power on not working ......please help
Link is not work....plz update link
sonu123456 said:
Link is not work....plz update link
Click to expand...
Click to collapse
here its - LINK TO stock kitkat android one sprout4 rom, flashable via custom recovery
huge thanks to 1cefire .
Port color is pls
Micromax e481 ios ROMs 10 download
flashed stock rom succesfully but I checked my warranty using fastboot getvar all command warranty shows no. what to do now?? :crying::crying:
reply
K1Ng0r.fTw~ said:
flashed stock rom succesfully but I checked my warranty using fastboot getvar all command warranty shows no. what to do now?? :crying::crying:
Click to expand...
Click to collapse
Relocked bootloader ?? and flashed via sptools??
bhavarsh1234 said:
Relocked bootloader ?? and flashed via sptools??
Click to expand...
Click to collapse
flashed via sp tool and bootloader is also locked still "getvar all" command shows warranty status:No :crying:
K1Ng0r.fTw~ said:
flashed via sp tool and bootloader is also locked still "getvar all" command shows warranty status:No :crying:
Click to expand...
Click to collapse
u tried download mode if yes then try firmware upgrade because i have read in a post in thread to gain warranty back flash it by this method but can u gave me the stock file u flashed on micromax canvas a1 because i flashed it then my phone was not turning on
bhavarsh1234 said:
u tried download mode if yes then try firmware upgrade because i have read in a post in thread to gain warranty back flash it by this method but can u gave me the stock file u flashed on micromax canvas a1 because i flashed it then my phone was not turning on
Click to expand...
Click to collapse
ya i did download mode but r u sure? firmware upgrade gain warranty back?? please confirm from some developer. i flash this file on mmx a1
http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150
Installation instruction:
Code:
Step 1 :- Firstly Download and Install USB Drivers in your PC from the download Section Below.
Step 2 :- Now Download Main ROM Zip and SP Flash Tools.
Step 3 :- After downloading Extract Them Into A Separate Folder into your PC. [Please Turn off Your Anti-Virus During The Process For Some Time.]
Step 4 :- Now Switch-Off You Canvas A1 , Remove Battery & Re-Insert It to Ensure that its Properly Switched Off.
Step 5 :- Next Open SP-Flash Tools From The Same Extracted Folder.
Step 6 :- Now click Click Scatter Loading & Select The ‘MTTK65XX_Scatter.txt‘ From The Directory Where you extracted the Main ROM.
Step 7 :- Hit the Download button and SP Flash Tools will start searching for your device.
Step 8 :- Now connect your device with a USB Cable in the switch off mode.
Step 9 :- Your device will be detected by SP Flash Tools and Upgrade Process will start.
Step 10 :-The process will complete in 3-4 minutes and then a success popup will appear, now disconnect your phone reinsert its battery and power it on.
That’s it, FIrst boot will take about 4-5 minutes wait for it and enjoy stock Experience.
K1Ng0r.fTw~ said:
ya i did download mode but r u sure? firmware upgrade gain warranty back?? please confirm from some developer. i flash this file on mmx a1
http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150
Installation instruction:
Code:
Step 1 :- Firstly Download and Install USB Drivers in your PC from the download Section Below.
Step 2 :- Now Download Main ROM Zip and SP Flash Tools.
Step 3 :- After downloading Extract Them Into A Separate Folder into your PC. [Please Turn off Your Anti-Virus During The Process For Some Time.]
Step 4 :- Now Switch-Off You Canvas A1 , Remove Battery & Re-Insert It to Ensure that its Properly Switched Off.
Step 5 :- Next Open SP-Flash Tools From The Same Extracted Folder.
Step 6 :- Now click Click Scatter Loading & Select The ‘MTTK65XX_Scatter.txt‘ From The Directory Where you extracted the Main ROM.
Step 7 :- Hit the Download button and SP Flash Tools will start searching for your device.
Step 8 :- Now connect your device with a USB Cable in the switch off mode.
Step 9 :- Your device will be detected by SP Flash Tools and Upgrade Process will start.
Step 10 :-The process will complete in 3-4 minutes and then a success popup will appear, now disconnect your phone reinsert its battery and power it on.
That’s it, FIrst boot will take about 4-5 minutes wait for it and enjoy stock Experience.
Click to expand...
Click to collapse
Brother i read it in this thread from where u got stock file brother i also used this stock file yesterday but my phone was not turning on i think i removed the battery then flashed that is the reason i think but then i used firmware upgrade mode it relocks the bootloader because today i went to mmx center and they updated software without any charges
bhavarsh1234 said:
Brother i read it in this thread from where u got stock file brother i also used this stock file yesterday but my phone was not turning on i think i removed the battery then flashed that is the reason i think but then i used firmware upgrade mode it relocks the bootloader because today i went to mmx center and they updated software without any charges
Click to expand...
Click to collapse
i flash firmware with battery. no need to remove then flash. they updated software what do u min??
Update: SPFlashTool flashable Marshmallow firmware file is now available. Build MOB30N.
OTA links are already there on xda, but here was no specific thread for Canvas A1 so i am writing one
Google has released the OTA files for Canvas A1 and other android one devices.
NOTE: To update your phone using OTA files your phone should be running Stock lollipop or atleast stock recovery. (Not applicable if using sp flash tool)
If you are running a custom rom or custom recovery then before proceeding to this guide you must revert back to stock lollipop using sp flash tool
Pre-requisites: 1.Your phone should be atleast 60% charged
2. Back up all important data (just to be safe)
Canvas A1 users can easily update their device by following method(s)
Method 1 (the usual method):
Step 1: Download the official Marshmallow OTA file from here https://android.googleapis.com/packages/ota/google_aq4501sprout_aq4501/dc78fbefaf5f69cc4754751251d9ece094bc96e6.signed-sprout-mmx-MRA58M-from-LMY48M.zip
Step 2: Connect your smartphone to computer using the original USB cable.
Step 3: Copy and paste the OTA zip files to phone's storage and make a note of its location.
Step 4: Boot your smartphone into recovery mode or stock recovery: Disconnect the phone from computer, and then turn it off.
Press and hold both the Volume and the Power buttons until the display turns on and enters bootloader mode.
Hit the volume button to open the Recovery menu and then press the power button to select it. Your phone should now boot into recovery mode.
At this moment, a dead Android with an exclamation mark should appear on the screen. Now press and hold Power button for three seconds and then hit the Volume up button once to progress into recovery mode.
Step 5: Return to the main recovery screen and choose 'install update from sdcard'.
Step 6: Then select the OTA zip file using the volume buttons for navigation and the Power button to select any file or open a folder. After you select the zip file, confirm its installation and the update should start installing on your device.
Step 7: Once the installation is done, return to main screen of recovery. Choose Reboot system now to restart the phone and boot into the newly installed Android 6.0 Marshmallow OTA update from Google.
Voila!! You are running official Android 6.0 :laugh:
Method 2 (using sp flash tool, best method)
This method can be used even if you are running a custom rom. You can also use this method to unbrick Micromax Canvas A1.
Pre-requisites: Windows computer, USB cable, and most important "patience".
Step 1:
a) Download micromax driver.{thanks to @mohsin.r.munshi}
Extract its content, you will find an .exe file inside a folder "driver9401". Disable your antivirus and run the .exe file as administrator. (If you are using 64-bit windows, you will need to "disable driver signature enforcement". Google it)
b) Download SP Flash tool from my mediafire or from its official website. Extract it to any folder
c) Download SPflashTool flashable Marshmallow firmware . Extract the zip file. You will see the following files in it (similar not exact)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note the location of MT6582_Android_scatter.txt file
Step2: Goto the folder where you have extracted sp flash tool. Run flash_tool.exe
Step 3: In sp flash tool, Click on "scatter loading". Then locate and select "MT6582_Android_scatter.txt". SP Flash tool will load all firmware files from the folder where you have extracted the OTA files.
Step 4: Power off your phone. And REMOVE the battery. Now on SP flash tool, click on "Download".
(refer to screenshots given on this website. Ignore the steps given on this website, just refer screenshots)
Step 5: (pay attention to every word) Connect USB cable to your phone only. Then Press and HOLD volume down button and insert the other end of USB cable to your pc. Flashing will start automatically. Wait till you see "OK" message on your pc.
Step 6: Once you see "OK" message, disconnect your phone and reinsert your phone's battery. Turn ON your phone. The first boot will take longer than usual.
Congo! You just updated/unbricked your Micromax Canvas A1.
Feel free to post comments for any doubts and errors
My canvas a1 software has been damaged, and it shows an error while installing update from sd card , so how do I can solve this problem ???? Please reply fast........
gd5121995 said:
My canvas a1 software has been damaged, and it shows an error while installing update from sd card , so how do I can solve this problem ???? Please reply fast........
Click to expand...
Click to collapse
flash official lollipop rom using method 2 above
Hi.. I'm on CM13 now. But I don't have mobile data for some reason. So I want to flash stock ROM. But last time I tried flashing stock, it wiped my IMEI numbers. Luckily my warranty status was somehow reset. So I had to get the phone replaced. Does this have a chance to cause the same problem (wipe my IMEI numbers)??
GughanRk said:
Hi.. I'm on CM13 now. But I don't have mobile data for some reason. So I want to flash stock ROM. But last time I tried flashing stock, it wiped my IMEI numbers. Luckily my warranty status was somehow reset. So I had to get the phone replaced. Does this have a chance to cause the same problem (wipe my IMEI numbers)??
Click to expand...
Click to collapse
sp flastool wipes userdata only, you wont loose your imei using spft.
sziraqui said:
sp flastool wipes userdata only, you wont loose your imei using spft.
Click to expand...
Click to collapse
Realy sorry to say this, but I lost my IMEI using SP Flashtools only. Check this thread.. There are a lot of other users facing the same problem.
And SN Write Tool method didn't help me get my IMEI back.. So I want to be really sure before flashing this time
recover imei android one....
try this...worked for my spice android one (mi-498)
http://forum.xda-developers.com/cro...lashable-zip-imei-repair-android-one-t2992846
GughanRk said:
Realy sorry to say this, but I lost my IMEI using SP Flashtools only. Check this thread.. There are a lot of other users facing the same problem.
And SN Write Tool method didn't help me get my IMEI back.. So I want to be really sure before flashing this time
Click to expand...
Click to collapse
In that case, i would suggest you to take a backup of your imei data using MTK Droid tool. Also copy your nvram folder straight from your phone to as many external storages as you can. Nvram (imei data) somehow becomes unrecognised after downgrading some phones.
Solution:
1. Use MTK droid tool to restore it from a previous backup.
or
2. locate nvram folder ( /data/nvram, correct me if i m wrong) DELETE it. Then paste a copy of your nvram folder that you copied when imei was not lost. DONT chmod. You will most probably get your network working (ensure that sim card was PRSENT and Radios were ON during this copy paste) within few seconds. I did this to restore imei on galaxy s4.
well, i have flashed 9 different mediatek phones using spflashtool, didnt lose imei in any.
sziraqui said:
In that case, i would suggest you to take a backup of your imei data using MTK Droid tool. Also copy your nvram folder straight from your phone to as many external storages as you can. Nvram (imei data) somehow becomes unrecognised after downgrading some phones.
Solution:
1. Use MTK droid tool to restore it from a previous backup.
or
2. locate nvram folder ( /data/nvram, correct me if i m wrong) DELETE it. Then paste a copy of your nvram folder that you copied when imei was not lost. DONT chmod. You will most probably get your network working (ensure that sim card was PRSENT and Radios were during this copy paste) within few seconds. I did this to restore imei on galaxy s4.
well, i have flashed 9 different mediatek phones using spflashtool, didnt lose imei in any.
Click to expand...
Click to collapse
Thanks! I'll post an update when I come around to flashing the stock ROM. Don't have the time now.
hi can i use these update for micromax unite2(8gb) from lolipop to marshmallow.
Firmwares are device specific. You CANNOT install a this on any other phone. You will brick your phone by installing a ROM which is not made for your device
Please update stock marshmallow link sir as soon as possible
.......
Thanks in advance
Micromax android one got hang at marshmallow logo.
My micromax android one got stuck at marshmallow logo. I tried to flash lollipop using SP flash as mention above in method 2. I connect my phone . My phone is successfully detected by my PC. But SP flash show no progress. why??? I follow all steps very carefully. Or is it not possible to install lollipop if your phone already has marshmallow?
ravipreet23 said:
My micromax android one got stuck at marshmallow logo. I tried to flash lollipop using SP flash as mention above in method 2. I connect my phone . My phone is successfully detected by my PC. But SP flash show no progress. why??? I follow all steps very carefully. Or is it not possible to install lollipop if your phone already has marshmallow?
Click to expand...
Click to collapse
That means your phone was not detected. Power off your phone. Load scatter file and then click on download button on so flashtool. Put one end of USB cable to your phone. Hold volume down and simultaneously put other end of USB cable to computer. If its connected, the progress bar at bottom will show progress. I am assuming you have installed all drivers.
I hope this helps.
ravipreet23 said:
My micromax android one got stuck at marshmallow logo. I tried to flash lollipop using SP flash as mention above in method 2. I connect my phone . My phone is successfully detected by my PC. But SP flash show no progress. why??? I follow all steps very carefully. Or is it not possible to install lollipop if your phone already has marshmallow?
Click to expand...
Click to collapse
That means your phone was not detected. Power off your phone. Load scatter file and then click on download button on so flashtool. Put one end of USB cable to your phone. Hold volume down and simultaneously put other end of USB cable to computer. If its connected, the progress bar at bottom will show progress. I am assuming you have installed all drivers.
I hope this helps.
sziraqui said:
That means your phone was not detected. Power off your phone. Load scatter file and then click on download button on so flashtool. Put one end of USB cable to your phone. Hold volume down and simultaneously put other end of USB cable to computer. If its connected, the progress bar at bottom will show progress. I am assuming you have installed all drivers.
I hope this helps.
Click to expand...
Click to collapse
I have installed all drivers as my pc detect my mobile as i can see in device manager. I perform all steps that you mention but SP flash player show nothings. CAn you tell me can i flash Lollipop stock rom on my android one which is running marshmallow previously. I cant find marshmallow stock rom thats why i have to flash lollipop stock rom??
sziraqui said:
OTA links are already there on xda, but here was no specific thread for Canvas A1 so i am writing one
Google has released the OTA files for Canvas A1 and other android one devices.
NOTE: To update your phone using OTA files your phone should be running Stock lollipop or atleast stock recovery. (Not applicable if using sp flash tool)
If you are running a custom rom or custom recovery then before proceeding to this guide you must revert back to stock lollipop using sp flash tool
Pre-requisites: 1.Your phone should be atleast 60% charged
2. Back up all important data (just to be safe)
Canvas A1 users can easily update their device by following method(s)
Method 1 (the usual method):
Step 1: Download the official Marshmallow OTA file from here https://android.googleapis.com/packages/ota/google_aq4501sprout_aq4501/dc78fbefaf5f69cc4754751251d9ece094bc96e6.signed-sprout-mmx-MRA58M-from-LMY48M.zip
Step 2: Connect your smartphone to computer using the original USB cable.
Step 3: Copy and paste the OTA zip files to phone's storage and make a note of its location.
Step 4: Boot your smartphone into recovery mode or stock recovery: Disconnect the phone from computer, and then turn it off.
Press and hold both the Volume and the Power buttons until the display turns on and enters bootloader mode.
Hit the volume button to open the Recovery menu and then press the power button to select it. Your phone should now boot into recovery mode.
At this moment, a dead Android with an exclamation mark should appear on the screen. Now press and hold Power button for three seconds and then hit the Volume up button once to progress into recovery mode.
Step 5: Return to the main recovery screen and choose 'install update from sdcard'.
Step 6: Then select the OTA zip file using the volume buttons for navigation and the Power button to select any file or open a folder. After you select the zip file, confirm its installation and the update should start installing on your device.
Step 7: Once the installation is done, return to main screen of recovery. Choose Reboot system now to restart the phone and boot into the newly installed Android 6.0 Marshmallow OTA update from Google.
Voila!! You are running official Android 6.0 :laugh:
Method 2 (using sp flash tool, best method)
This method can be used even if you are running a custom rom. You can also use this method to unbrick Micromax Canvas A1.
Pre-requisites: Windows computer, USB cable, and most important "patience".
Step 1:
a) Download micromax driver.{thanks to @mohsin.r.munshi}
Extract its content, you will find an .exe file inside a folder "driver9401". Disable your antivirus and run the .exe file as administrator. (If you are using 64-bit windows, you will need to "disable driver signature enforcement". Google it)
b) Download SP Flash tool from my mediafire or from its official website. Extract it to any folder
c) Extract the the contents of factory image. [Edit: sp flashtool flashable Android 6.0 is currently not available. I 'll add a link as soon as it is available. I wrote this too early, sorry. For now, if you are running a custom rom, flash official lollipop first and then use method 1 to update to marshmallow.].You will see the following files in it.
Note the location of MT6582_Android_scatter.txt
Step2: Goto the folder where you have extracted sp flash tool. Run flash_tool.exe
Step 3: In sp flash tool, Click on "scatter loading". Then locate and select "MT6582_Android_scatter.txt". SP Flash tool will load all firmware files from the folder where you have extracted the OTA files.
Step 4: Power off your phone. And REMOVE the battery. Now on SP flash tool, click on "Download".
(refer to screenshots given on this website. Ignore the steps given on this website, just refer screenshots)
Step 5: (pay attention to every word) Connect USB cable to your phone only. Then Press and HOLD volume down button and insert the other end of USB cable to your pc. Flashing will start automatically. Wait till you see "OK" message on your pc.
Step 6: Once you see "OK" message, disconnect your phone and reinsert your phone's battery. Turn ON your phone. The first boot will take longer than usual.
Congo! You just updated/unbricked your Micromax Canvas A1.
Feel free to post comments for any doubts and errors
Click to expand...
Click to collapse
BROM error : S_FT_DOWNLOAD_FAIL[4008]
Download to flash fail. Please press ctrl +alt +T to turn on debug log then reproduce again.
Hint- BROM_DLL_V5.log and BROM_DLL.log would be created and record more detail information.
It is showing this error what should i do.?
please reply fast sir.
MayankGupta said:
BROM error : S_FT_DOWNLOAD_FAIL[4008]
Download to flash fail. Please press ctrl +alt +T to turn on debug log then reproduce again.
Hint- BROM_DLL_V5.log and BROM_DLL.log would be created and record more detail information.
It is showing this error what should i do.?
please reply fast sir.
Click to expand...
Click to collapse
I can help you if you provide me more details.
Which phone model you were dealing with? Which rom it it was running before? What were you exactly trying to achieve? Also if possible post the log files here.
xposed
can i have xposed for cm13 marshmallow ?
---------- Post added at 05:34 PM ---------- Previous post was at 04:41 PM ----------
can i have xposed for cm13 marshmallow ?
KadirDvl said:
can i have xposed for cm13 marshmallow ?
---------- Post added at 05:34 PM ---------- Previous post was at 04:41 PM ----------
can i have xposed for cm13 marshmallow ?
Click to expand...
Click to collapse
Yes there are xposed for MM.. Just google it.
[url]http://forum.xda-developers.com/xposed/discussion-xposed-marshmallow-t3249095 [/url]
Sent from my sprout4 using XDA Labs