Develop Bugs

CWM recovery for KARBONN A18!!!

CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:

Good Job done
Built from source or using web builder?

i cant flash this through sp - tool
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits:
I, Me & Myself..
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
while downloading i got the error

reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
First Check if the MTK drivers are installed, check it by going tinto the device managers hardware section in my computer
If it is proper then try connecting your phone without the battery inserted

Same problem..
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..

i ported this recovery from a ZOPO Z900 Leader chinese android handset...i tried building from source, but i failed at it because of partition style in a18...
For people facing problems flashing it through sp tools, u all can try to flash it using another pc or alternatively view this youtube video -> http://www.youtube.com/watch?v=969xwsUTkSY

ujjwalk308 said:
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
Click to expand...
Click to collapse
Same problem here.

Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!

vshlkmr said:
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
Click to expand...
Click to collapse
Ok.now waiting for the bugfix.

reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
always usb cable error
Connect usb cable & discconet auto & charging mode
this is usb driver ????

great job. im a noob at this so will try after people posting have successfully ported the cwm to their phone

There are two recovery.img files in your attachments. recovery.img and cwmfinal.img. Which one should be used in sp flash tool?

I recently purchased Karbonn a21, can I try this on it?
Sent from my GT-I9300 using xda app-developers app

Thnx bro worked like a charm.
Sent from my Karbonn_A18 using xda app-developers app

fail root
plz send device manager screen shot

Can anyone please upload stock rom of karbonn a18. My device stock at boot animation screen.
Sent from my GT-P1000 using xda premium

reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
same problem any help pz

Cwm flashed
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?

vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
will you please give CWM for Micromax A90 specification maybe same as A18
here is Specification
Micromax A90
Super Amoled Plus LCD with 262 k
MTK6575 CPU 1 Ghz
512 MB RAM (350 - 400) User available
512 MB ROM ( its not RAM ) for apps
2.5 GB external SD for media file ( Music/Video,,,etc.)
8 Mega Pixel Camera + 0. Mega Pixel Front Camera
Android OS 4.0.3
with Rooted cell
plz help us to create new CWM + Custom ROM
also its same specification from some Chinese Brand like Zoppo / Hero / Gionnee / HDC
plz help.

Pritesh.mohan said:
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
Click to expand...
Click to collapse
You could do that before flashing Cwm aswell.. Use rom toolbox.. I did it the day I got this phone

[RECOVERY][CWM/TWRP][Symphony W90]

Hello Guys...
This is my first work on Symphony W90. It's TWRP 2.5.0.0 For Symphony W90.
Disclaimer:
Installing Custom Recovery For your Phone Voids warranty. I am not be Responsible For any
Damage or in any matter
Requirements:
Root and MOBILE UNCLE TOOLS APP
Instructions:
1.Download Mobileuncle Tools from attachment and install
2.Download the twrp2.5.0.0.zip extract it and Put it in root of your SDCARD
3.Open Mobile uncle tools and select Recovery Update
4.Flash my recovery.img file
5.Done
6. To boot into recovery, power off the phone then hold VOLUME UP+POWER Button until the TeamWin logo is showed
Credits:
Bruno Martins & Yuweng
TeamWin for their amazing Recovery

Good news, I have also ported cwm for the device. Follow the instructions,
Instructions:
1.Download Mobileuncle Tools from 1st posts attachment and install
2.Download the cwm5.5.0.4.zip from this attachment extract it and Put it in root of your SDCARD
3.Open Mobile uncle tools and select Recovery Update
4.Flash the recovery.img file
5.Done
6.To boot into recovery, Power off the phone then hold VOLUME UP+POWER Button until the recovery comes up
Creadits:
Koushik Dutta for his ClockworkMod recovery:

This post is Intentionally left blank

any jb rom available
i am using w90 for almost 8 months and now want a JB rom for it, can you please provide one and give the instruction to flash it,
zamilhn said:
Good news, I have also ported cwm for the device. Follow the instructions,
Instructions:
1.Download Mobileuncle Tools from 1st posts attachment and install
2.Download the cwm5.5.0.4.zip from this attachment extract it and Put it in root of your SDCARD
3.Open Mobile uncle tools and select Recovery Update
4.Flash the recovery.img file
5.Done
6.To boot into recovery, Power off the phone then hold VOLUME UP+POWER Button until the recovery comes up
Creadits:
Koushik Dutta for his ClockworkMod recovery:
Click to expand...
Click to collapse

shamim0318 said:
i am using w90 for almost 8 months and now want a JB rom for it, can you please provide one and give the instruction to flash it,
Click to expand...
Click to collapse
I have one problem with your installation steps. My W90 has no volume buttons, so how to get into recovery mode?

ALCATEL ot 918n (2.3.5 / 2.3.6) how to ROOT and install CWM RECOVERY for NOOB

NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/z71f7ao9wio6vvi/download this.zip
note --->> extract all the RAR files in DOWNLOAD THIS folder
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by TURn OFF first your ddevice then PRESS and HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Look and find the scatter text file and open it.
note: the ver of scatterfile to choose should be the same ver of your device ( ex. ur device is 2.3.6 the you should choose 2.3.6 scater file)
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/rar/a0y6F3s6/superuser.html
password:
akosikhyla
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
when your done on the steps above you should UPDATE your cwm recovery( this is important for flashing CUSTOM ROMS..etc)
>>>> follow the steps below:
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/c6gryly8x1nxu9w/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
http://www.4shared.com/zip/ijDqcind/recovery_2_3_5-6-signed.html
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
dont forget to say THANKS

zatanika said:
NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/ucdvhqlefmktgna/download this.zip
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by PRESSING HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
4. Look and find the scatter text file and open it.
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/zip/EahpxSml/Superuser-312_-efghi-signed.html
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
when your done on the steps above FLASH CMW RECOVERY by MARK, its universal CMW recovery for CUSTOMIZED ROM
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/dfvth3ep9o8bu1u/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
------> after accomplishing the steps above DL this zip file >>>>> https://www.dropbox.com/s/3d1umegiill2s3s/recovery_2_3_5-6-signed.zip
-------> put it on the root of ur sdcard then flash it
*turn off your device , vol up+power, > install zip frm sd > chose zip file then flash it..
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
dont forget to say THANKS
Click to expand...
Click to collapse
thank ypu so much your tut 100% works in my alcatel one touch 918N ,,,,

diordna_j said:
thank ypu so much your tut 100% works in my alcatel one touch 918N ,,,,
Click to expand...
Click to collapse
glad to help.. ^_^

password for superuser.rar

working fine, thank you

flipsonder29 said:
password for superuser.rar
Click to expand...
Click to collapse
password: akosikhyla

Help! After putting the downloaded zip file to my SD Card then turned off the phone and reboot by pressing the power button + volume up it displays the android symbol and Im stuck with it. Basically i cant open my phone. How can i fix this problem? please help!

ginger09 said:
Help! After putting the downloaded zip file to my SD Card then turned off the phone and reboot by pressing the power button + volume up it displays the android symbol and Im stuck with it. Basically i cant open my phone. How can i fix this problem? please help!
Click to expand...
Click to collapse
wew..why on earth u put the downloaded files on your sdcard? what files you put on it?

help
zatanika said:
NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/ucdvhqlefmktgna/download this.zip
note --->> extract all the RAR files in DOWNLOAD THIS folder
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by TURn OFF first your ddevice then PRESS and HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
4. Look and find the scatter text file and open it.
note: the ver of scatterfile to choose should be the same ver of your device ( ex. ur device is 2.3.6 the you should choose 2.3.6 scater file)
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/rar/a0y6F3s6/superuser.html
password:
akosikhyla
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
when your done on the steps above you should UPDATE your cwm recovery( this is important for flashing CUSTOM ROMS..etc)
>>>> follow the steps below:
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/dfvth3ep9o8bu1u/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
http://www.4shared.com/zip/ijDqcind/recovery_2_3_5-6-signed.html
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
dont forget to say THANKS
Click to expand...
Click to collapse
Have a nice evening.
Please us your re-upload or another file sharing site in the http://forum.xda-developers.com/show...3162&nocache=1 page before you upload "download this.zip" file since it would need.
Thank you.

^_^
links updated.. ^_^

zatanika said:
links updated.. ^_^
Click to expand...
Click to collapse
DOWNLOAD THIS >>>>>>>>>> https://
www.dropbox.com/s/z71f7ao9wi...oad%
20this.zip - download not working. update please

thanks are you ako si khyla ?
thanks for this are you ako si kyla alcatel group?:fingers-crossed:

my phone just keeps on rebooting
what happened?

*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I strictly followed all the rules but when I opened custom recovery, it stuck on the android logo (the start-up screen) for an hour.
can you please help me?

zatanika said:
links updated.. ^_^
Click to expand...
Click to collapse
i was stuck at step 3! huhuh my computer can't install my phone's driver, what shall i do?

zatanika said:
NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/z71f7ao9wio6vvi/download this.zip
note --->> extract all the RAR files in DOWNLOAD THIS folder
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by TURn OFF first your ddevice then PRESS and HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
4. Look and find the scatter text file and open it.
note: the ver of scatterfile to choose should be the same ver of your device ( ex. ur device is 2.3.6 the you should choose 2.3.6 scater file)
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/rar/a0y6F3s6/superuser.html
password:
akosikhyla
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
when your done on the steps above you should UPDATE your cwm recovery( this is important for flashing CUSTOM ROMS..etc)
>>>> follow the steps below:
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/c6gryly8x1nxu9w/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
http://www.4shared.com/zip/ijDqcind/recovery_2_3_5-6-signed.html
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
dont forget to say THANKS
Click to expand...
Click to collapse
:good: thank you so much your thread is very 100% works device :fingers-crossed:

heeelllllpppp urgent
Help! After putting the downloaded zip file to my SD Card then turned off the phone and reboot by pressing the powerbutton + volume up it displays theandroid symbol and Im stuck withit. Basically i cant open my phone. How can i fix this problem?please help!

i m facing problem
Hi
I haved followed the above procedure mentioned by u, but since then i m not getting incoming calls and and the home button also stopped working, i dont know where i made mistake but plz help me coz this is my friends phone as he was facing low memory problem so by having faith on xda i took his phone to root it and uninstall unwanted apps to free up some space.
I also tried flashing two different custom roms but it goes in boot loop and i also flashed it with stock rom again boot loop problem.
Plz hel me its urgent i had to return this phone to my friend.

My phone USB is broken. Is there any way to install recovery, or root phone from sdcard, or any other method?

pano gagawin ko ?
kuya/ate pano po ito ? natapos ko nmn po yung sa may custom recovery pero kpag nag(vol up + power) di nmn nag iba yung recovery boot :3

Multi L Miui v5 Rom For Xiaomi Redmi 1S with MiFlash/Update Rom/Recovery

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Specifications:
Xiaomi Hongmi 1S Red Rice MSM8228 Quad Core 1.6GHz 1G Ram 8G Rom 4.7 Inch HD Screen 3G WCDMA
- Qualcomm Snapdragon MSM8228 Quad Core 1.6GHz
- 4.7 inch 1280 * 720 Pixel HD IPS Screen
- 1GB RAM + 8GB ROM
- 8.0MP Rear Camera + 1.6MP Front Camera
- Support 3G WCDMA Network, GPS, WIFI, Bluetooth, etc
Tested With Windows 7
1. Restore Stock Rom with MiFlash
2. Root
3. Update Ota Stable (JHCCNBD24) Rom And Ota Stable (JHCCNBF31 Rom
4. install Touch TWRP Recovery 2.7.1 And Touch CWM Recovery v6.0.3.6
5. WSM Manager and XExtStorage
6. Extra
7. Cyanogenmod 11 Rom
8. Xposed installer and modules
9. Full Backup TWRP Recovery / Backup and Restore only apps +data/ Backup and Restore only IMEI
10. Anti -Theft
Tread updated 16/11/2014
--------------------------------------------------------------------------------------------------------------------------------------------------------
I am not responsible for any damage on your phone !
---------------------------------------------------------------------------------------------------------------------------------------------------------
1. Restore Stock Multi Lang Miui v5 Rom (JHCCNBD23) 531 Mb With MiFlash
Link: http://www.mediafire.com/download/ex1ggyxmrctr99x/armani_images_JHCCNBD23.0_4.3_340628b41f.tgz
MiFlash
Link: http://www.mediafire.com/?v8k67vsb9a62xks
Unzip JHCCNBD23 Rom
Install Miflash ,Connect phone in Fastboot to pc
Run as Administrator MiFlash klik Refresh you will see your phone is connected (See picture) and Navigate to armani_images_JHCCNBD23.0_4.3 Folder and Flash Phone.
Takes about 2 to 3 min.
----------------------------------------------------------------------------------------------------------------------------------------------------------
2. Root
Download the RootHM1SW.zip and install with update app.
Link: http://www.mediafire.com/download/bxei26g0645v6ru/Root+HM1SW.zip
----------------------------------------------------------------------------------------------------------------------------------------------------------
3. Update OTA
Update Ota Multi Lang stable (JHCCNBD24)365 Mb
Update Ota Multi Lang Stable (JHCCNBF31) 410 Mb
backup your phone before installing the update
Download and install Rom with update app or Fresh install
(JHCCNBD24) Link: http://www.mediafire.com/download/b...ani_mam_JHCCNBD24.0_24.0.0_41880f3302_4.3.zip
(JHCCNBF31) Link: https://www.mediafire.com/?60p28a8g6678jw9
On (JHCCNBF31) Backup app is Missing.
Delete With Root Explorer in System/app The ( Backup.app only) And and copy the downloaded Backup app in System/app and Reboot Phone.
Backup app Link: http://www.mediafire.com/download/jpuylktd11azdy5/Backup.apk
it is best not to remove the SDCard from the phone
----------------------------------------------------------------------------------------------------------------------------------------------------------
4. TWRP Recovery 2.7.1 ( See Picture )
Thanks to juliusssss !!
Download Tool For Fasboot on (Thread)
Go in Fastboot with phone connect to pc
unzip Cambio_Recovery_Redmi1S_TWRP_juliusssss_MiRecovery_20140705.7z
Run (administator) the Cambiar_Recoverys_Redmi1S.bat and select
Number 1. = (TWRP Touch Recovery) Press enter.
Number 2. = (TWRP Stock Recovey)
After flashing Recovery discconect and Reboot phone.
Translated Note of Thread:
If you are an official rom, we can certainly be installed / system / etc / install-recovery.sh file that cause us to re-install the official Mirecovery the RM restart. For this we need to install first to prevent root delete the file with root explorer.
Thread: http://foro.miui.es/index.php?topic=8614.0
----------------------------------------------------------------------------------------------------------------------------------------------------------
CWM Recovery v6.0.3.6 ( See Picture )
Thanks to brainfog !!
if you have already flashed TWRP Recovery and want to flash CWM Recovery
Download signed_cwm_update.zip to SDCard
Install with update app or
in Recovery install signed_cwm_update.zip
With stock Recovery:
download signed_cwm_update.zip to pc Rename signed_cwm_update.zip to update.zip
Connect phone to pc and copy update.zip to root of Internal storage go with phone in recovery and select Install update.zip to System.
Source Thread:https://techpunked.wordpress.com/2014/07/08/cwm-touch-recovery-v6-0-3-6-for-redmi-1s-wcdma/
CWM Recovery Link: https://mega.co.nz/#!RQkVAIDB!OWecFNTcKm9vufDhk0vGX9K3vsL10Djf9YuCFKS7Wg0
Restore Stock Recovery Link: https://mega.co.nz/#!EElW0QIZ!3frRQB8iEvjTpuf6XTBtbA5SxCo0FEBvLVSqiWZQaXY
Boot into recovery is faster with CWM Recovery v6.0.3.6
----------------------------------------------------------------------------------------------------------------------------------------------------------
5. WSM Manager
Reboot,EXxtStorage options and much more....
Download on thread
Install WSM manager
Root Permission
install Xposed
The Phone will Restart.
Thread: http://forum.xda-developers.com/showthread.php?t=2481178
----------------------------------------------------------------------------------------------------------------------------------------------------------
XExtStorage
install XextStorage
open XExtStorage and set
Primary SDCard 1
Secondary SDCard 0
(see picture)
Enable XExtStorage in WSM manager
Copy Android Folder from internal storage to SDCard !
Reboot Phone.
Link: http://www.mediafire.com/download/jlj4c48t1c4c2ay/XExtStorage.apk
----------------------------------------------------------------------------------------------------------------------------------------------------------
6. Google Camera
From Thread: http://forum.xda-developers.com/showthread.php?t=2341080
Link : https://www.dropbox.com/s/l2at3wzy8t5st3m/Gallery.apk
----------------------------------------------------------------------------------------------------------------------------------------------------------
Android L Keyboard
Just install
Link: http://www.apkmirror.com/apk/google-inc/google-keyboard/google-keyboard-4-0-21173-1568296-apk/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
YouTube 4.4.11
Tread: http://forum.xda-developers.com/showthread.php?t=1529715
----------------------------------------------------------------------------------------------------------------------------------------------------------
Lenovo Calendar
Link : https://www.mediafire.com/?2btogoz6dhrgl1z
----------------------------------------------------------------------------------------------------------------------------------------------------------
YouTube Downloader v4.3
Tread: http://forum.xda-developers.com/showthread.php?t=2137743
-----------------------------------------------------------------------------------------------------------------------------------------------------------
7. Stable Multi Lang Cyanogenmod 11 R3 Rom 230Mb ******
Thanks to , Kra1o5,fefifofum,Tarun93, MAITREYA
Rom Pictures
Link: https://mega.co.nz/#F!AItk3C4J!ED70gSDJG38YOMEAzxjE3A
Install in TWRP Or CWM Recovery
Wipe data,cache and dalvik cache.
Flash Rom
Flash GApps.zip
Thread http://thebroodle.com/xiaomi/redmi-1s/cm11-stable-xiaomi-redmi-1s-android-4-4-4-kitkat-bugless-rom/
Link Rom https://s.basketbuild.com/filedl/de...i/armani/cm-11-20140920-UNOFFICIAL-armani.zip
Download GApps.zip from link on Thread
How to enable Developer settings
1. Select settings
2. Select about phone
3. tab 7 times on build-Number
----------------------------------------------------------------------------------------------------------------------------------------------------------
8. Xposed Installer
Install Xposed Installer
And you can install Modules to Customize your phone
Link: http://repo.xposed.info
Modules ( Tweaks )
-Download2SD Download location on Sdcard ( Tested )
http://dl-count.xposed.info/modules/..._v9_acf08f.apk
-NoSafeVolumeWarning No Warning Volume( Not Tested )
http://dl.xposed.info/modules/com.py...6_485a40_0.apk
-SMS Xposed Wake on sms and Flash Flashlight ( Not Tested )
http://dl-xda.xposed.info/modules/co...v11_85cb23.apk
-AlternateAppPicker Select Default app ( Not Tested )
http://dl-xda.xposed.info/modules/pk..._v3_6c8c0f.apk
Extra
-Smart Network Network options ( Not Tested )
http://dl-xda.xposed.info/modules/ma...123_4c575d.apk
-Gravitybox customize phone: Physical Go to sleep button, quickunlock,Torch and much More settings ( Tested )
http://dl.xposed.info/modules/com.ce...111_70a4b6.apk
-XCoolDroid v1.0 Resize of your Google keyboard ( Not Tested )
http://forum.xda-developers.com/atta...0&d=1410005819
-Chromepie Fast settings module for Google Chrome( Not Tested )
http://dl.xposed.info/modules/com.jt..._v2_2c7b0d.apk
-Advanced Power Menu Soft Reboot option and more ( Tested )
http://dl-xda.xposed.info/modules/hk...v33_2b5ca5.apk
-Battery Thermeing HDPI Statusbar Battery ( Not Tested )
http://forum.xda-developers.com/xpos...meing-t2407727
--------------------------------------------------------------------------------------------------------------------------------------------------------
9. Full Backup Rom
1. With CWM Recovery
Boot in Recovery With a Rebooter app
Select in CWM Recovery backup and restore
Select Backup
The Easyt Way
This step only once
Install Rom Manager
Select Recovery Setup
Select Below (Clockworkmode Recovery)
Select below ( Device Not Listed Above)
Select 3.x+
Select OK
Then
Select Backup Current Rom
Location Backup Folder
sdcard1/clockworkmod
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Backup only apps+data to restore in a different Rom
Download Helium Premium
select apps (not system apps)
Disable (Small Backup)
select backup
select Save on sdcard
Location Backup Folder sdcard/carbon Folderr
Link : http://www33.zippyshare.com/d/122513...PK4Fun.com.apk
Helium Tool Pc/Mac/Linux
Link: https://www.clockworkmod.com/carbon
Resore only apps+data
Install and open Helium Premium
Select Restore backup
Select apps
Select Restore
----------------------------------------------------------------------------------------------------------------------------------------------------------
Backup IMEI
Install Mobileuncle MTK Tool
Select IMEI Backup Restore (MTK)
Select Backup IMEI to SDCARD2(MTK)
Location - SDCARD/IMEI.bak
Restore IMEI in a different Rom
Copy the IMEI.bak to SDCARD
Select IMEI Backup Restore (MTK)
Select Restore IMEI to SDCARD2(MTK)
Select Ok
Reboot Phone Ok
Link: https://play.google.com/store/apps/d...euncle.toolbox
---------------------------------------------------------------------------------------------------------------
Easy Phone Tunes
Synchronize music from Itunes to Internal /Sdcard on phone
Install Easy phone Tunes from Playstore
Install SetupEasyPhoneTunes Windows
or
Install SetupEasyPhoneTunes Mac
Connect PC/MAC - Phone (MTP)
Select Settings
Select Storage
Select
App: https://play.google.com/store/apps/d...es.android.app
Windows
http://f0da7f376559b2016640-1cc6f615...E]oneTunes.exe
----------------------------------------------------------------------------------------------------------------------------------------------------------
10. Anti -Theft
Thanks to leducbao
Theftie Find My Phone
As Root System app
Download Theftie to phone
Go with Root Explorer To system/app
Mount R/W
Copy Theftie.apk to The folder
Set root premision to "0644"
Mount R/W
Reboot Phone
Enable Theftie in Xposed
If you install Theftie as system app can then secured to restore Settings -factory Reset - lock, wipe, sdcard remotely.
Link: http://forum.xda-developers.com/andr...phone-t2802092
Instuctions: http://www.theftie.net/manual
Find your phone: http://www.theftie.net
----------------------------------------------------------------------------------------------------------------------------------------------------------
Easy Phone Tunes
Synchronize music from Itunes to Internal /Sdcard on phone
Install Easy phone Tunes from Playstore
Install SetupEasyPhoneTunes Windows
or
Install SetupEasyPhoneTunes Mac
Connect PC/MAC - Phone (MTP)
Select Settings
Select Storage
Select
App: https://play.google.com/store/apps/details?id=com.easyphonetunes.android.app
Windows
http://f0da7f376559b2016640-1cc6f61...a.r34.cf3.rackcdn.com/SetupEasyPhoneTunes.exe

@77777777777777
You have done amazing job here Thank!!
I'm using stock Rom Stable 24.0.0 Rom + Rooted running beautiful!!..
Now I can't wait for custom Rom for our Redmi 1S:good:

Thanks !
Sent from my HM 1SW using XDA Premium 4 mobile app

On miui.su available version 31.0 (JHCCNBF31.0)
---------- Post added at 12:25 AM ---------- Previous post was at 12:07 AM ----------
In title error: right name "Redmi 1S", not "Redmi S1"

Thanks overlooked !
Sent from my HM 1SW using XDA Premium 4 mobile app

Official TWRP recovery 2.7.1.0
77777777777777 said:
4. TWRP Recovery 2.7.1 ( See Picture )
Thanks to juliusssss !!
Go in Fastboot with phone connect to pc
unzip Cambio_Recovery_Redmi1S_TWRP_juliusssss_MiRecovery _20140705.7z
Run (administator) the Cambiar_Recoverys_Redmi1S.bat and select
Number 1. = (TWRP Touch Recovery) Press enter.
Number 2. = (TWRP Stock Recovey)
After flashing Recovery discconect and Reboot phone.
Tread: http://foro.miui.es/index.php?topic=8614.0
Link https://www.copy.com/s/0n8u9amfhdG4/...ry_20140705.7z
Click to expand...
Click to collapse
Also TWRP recovery 2.7.1.0 Official by Dev (Dees_Troy) and ( DarkNightmare)
http://en.miui.com/thread-29291-1-1.html

Anybody successfully install it?

Redmi 1S Fastboot Stock Rom / Unbrick
Hi every one following link contains all stock version of redmi 1s Rom choose the latest rom AND use MiFlash tool.
ROM Link en.miui.com/thread-21812-1-1.html
MiFlash Tool link bigota.d.miui.com/tools/MiPhone20140509.exe
please use http:\\ before the above links as xda not allowing to post outside links and roms are not surely indian edition. but english language option comes in boot

Nice share...
just subscribe this thread

Redmi 1S Fastboot Stock Rom / Unbrick
Use Latest redmi 1s Rom link is http://bigota.d.miui.com/JHCCNBF36.0/armani_images_JHCCNBF36.0_4.3_cn_5360473a1c.tgz
No Need of Using OTA Roms in between till the latest one arrives
and the following link contains many Recovery and Fastboot rom
http://en.miui.com/forum.php?mod=viewthread&tid=21812&highlight=fastboot+redmi+1s
77777777777777 said:
1. Restore Stock Rom with MiFlash
2. Root
3. Update Ota Stable (JHCCNBD24) Rom And Ota Stable (JHCCNBF31 Rom
4. install Touch TWRP Recovery 2.7.1 And Touch CWM Recovery v6.0.3.6
5. WSM Manager and XExtStorage
6. Extra
7. How to Manual flash Recovery.img (ADB-Fastboot for Windows) [/B]
Tread updated 04/09/2014
1. Restore Stock Multi Lang Miui v5 Rom (JHCCNBD23) 531 Mb With MiFlash
Link: http://www.mediafire.com/download/ex1ggyxmrctr99x/armani_images_JHCCNBD23.0_4.3_340628b41f.tgz
MiFlash
Link: http://www.mediafire.com/?v8k67vsb9a62xks
Unzip JHCCNBD23 Rom
Install Miflash ,Connect phone in Fastboot to pc
Run as Administrator MiFlash klik Refresh you will see your phone is connected (See picture) and Navigate to armani_images_JHCCNBD23.0_4.3 Folder and Flash Phone.
Takes about 2 to 3 min.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2. Root
Download the RootHM1SW.zip and install with update app.
Link: http://www.mediafire.com/download/bxei26g0645v6ru/Root+HM1SW.zip
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
3. Update Ota Multi Lang stable (JHCCNBD24) 365 Mb
Update Ota Multi Lang Stable (JHCCNBF31) 410 Mb
backup your phone before installing the update
Download and install Rom with update app or Fresh install
(JHCCNBD24) Link: http://www.mediafire.com/download/b...ani_mam_JHCCNBD24.0_24.0.0_41880f3302_4.3.zip
(JHCCNBF31) Link: https://www.mediafire.com/?60p28a8g6678jw9
On (JHCCNBF31) Backup app is Missing.
Delete With Root Explorer in System/app The ( Backup.app only) And and copy the downloaded Backup app in System/app and Reboot Phone.
Backup app Link: http://www.mediafire.com/download/jpuylktd11azdy5/Backup.apk
it is best not to remove the SDCard from the phone
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
4. TWRP Recovery 2.7.1 ( See Picture )
Thanks to juliusssss !!
Download Tool For Fasboot on (Thread)
Go in Fastboot with phone connect to pc
unzip Cambio_Recovery_Redmi1S_TWRP_juliusssss_MiRecovery_20140705.7z
Run (administator) the Cambiar_Recoverys_Redmi1S.bat and select
Number 1. = (TWRP Touch Recovery) Press enter.
Number 2. = (TWRP Stock Recovey)
After flashing Recovery discconect and Reboot phone.
Translated Note of Thread:
If you are an official rom, we can certainly be installed / system / etc / install-recovery.sh file that cause us to re-install the official Mirecovery the RM restart. For this we need to install first to prevent root delete the file with root explorer.
Thread: http://foro.miui.es/index.php?topic=8614.0
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CWM Recovery v6.0.3.6 ( See Picture )
Thanks to brainfog !!
if you have already flashed TWRP Recovery and want to flash CWM Recovery
Download signed_cwm_update.zip to SDCard
Install with update app or
in Recovery install signed_cwm_update.zip
With stock Recovery:
download signed_cwm_update.zip to pc Rename signed_cwm_update.zip to update.zip
Connect phone to pc and copy update.zip to root of Internal storage go with phone in recovery and select Install update.zip to System.
Source Thread:https://techpunked.wordpress.com/2014/07/08/cwm-touch-recovery-v6-0-3-6-for-redmi-1s-wcdma/
CWM Recovery Link: https://mega.co.nz/#!RQkVAIDB!OWecFNTcKm9vufDhk0vGX9K3vsL10Djf9YuCFKS7Wg0
Restore Stock Recovery Link: https://mega.co.nz/#!EElW0QIZ!3frRQB8iEvjTpuf6XTBtbA5SxCo0FEBvLVSqiWZQaXY
Boot into recovery is faster with CWM Recovery v6.0.3.6
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
5. WSM Manager
Reboot,EXxtStorage options and much more....
Download on thread
Install WSM manager
Root Permission
install Xposed
The Phone will Restart.
Thread: http://forum.xda-developers.com/showthread.php?t=2481178
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
XExtStorage
install XextStorage
open XExtStorage and set
Primary SDCard1
Secondary SDCard0
(see picture)
Enable XExtStorage in WSM manager
Copy Android Folder from internal storage to SDCard !
Reboot Phone.
Link: http://www.mediafire.com/download/jlj4c48t1c4c2ay/XExtStorage.apk
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------
6. Google Camera
From Thread: http://forum.xda-developers.com/showthread.php?t=2341080
Link : https://www.dropbox.com/s/l2at3wzy8t5st3m/Gallery.apk
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Google Keyboard (AOSP) 4.4
All language settings
Just install
Do NOT copy it in system/app !
if you want you can remove the stock keyboard !
backup app always recommended !
Link: http://www.mediafire.com/?2qer4ys05hfpnyu
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
YouTube 4.4.11
Tread: http://forum.xda-developers.com/showthread.php?t=1529715
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
YouTube Downloader v4.3
Tread: http://forum.xda-developers.com/showthread.php?t=2137743
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
7. How to Manual flash Recovery.img (ADB-Fastboot for Windows)
Create a folder in
Hard-drive C: (folder-name)
----Android-----
Copy the recovery.img file in C: Android folder
Connect Phone in Fastboot to pc
Option 1.
Open as Administrator Command promp :
(Windows 7 ,Open the Start Menu, type cmd in the search box and press Enter)
Option 2.
Run as an Administrator the START.cmd file
Type:
cd \Android
Thrust Enter
c:\Android>fastboot flash recovery recovery.img
Thrust Enter
Manual reboot phone
Link: http://www.mediafire.com/?8c5r3xmh71i6k62
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse

All about Redmi 1s rooting, custom rom installation, upgrading to kitkat
Mokee ROM For Xiaomi Redmi 1S - Android
4.4.4 Indian version
http://forum.xda-developers.com/android/general/mokee-rom-xiaomi-redmi-1s-android-4-4-4-t2886275
custom cyanogenmod android 4.4 ROM for
redmi 1S with preinstalled xposed framework
http://forum.xda-developers.com/android/general/custom-cyanogenmod-android-4-4-rom-t2888971
Custom rom xiaomi redmi 1s indian
version
http://forum.xda-developers.com/android/general/custom-rom-xiaomi-redmi-1s-indian-t2882604
Unbrick Redmi 1s unbrick (indian version)
rooting, installing CWM & custom ROM guide
http://forum.xda-developers.com/android/general/redmi-1sindian-version-unbricking-t2882369
Root redmi 1S (Indian version) with
SuperSU installed (No native root method)
http://forum.xda-developers.com/android/general/root-redmi-1s-indian-version-supersu-t2881416

Handy topic. But i would advice people not to install TWRP or CWM but instead just load it once needed with fastboot.
Because it might still have some problems and once it goes wrong, your device will be bricked.
I am not sure how far the development is for armani regarding TWRP and CWM, I've been using the beta version of CWM without problems howsoever.

NiTrOwow said:
Handy topic. But i would advice people not to install TWRP or CWM but instead just load it once needed with fastboot.
Because it might still have some problems and once it goes wrong, your device will be bricked.
I am not sure how far the development is for armani regarding TWRP and CWM, I've been using the beta version of CWM without problems howsoever.
Click to expand...
Click to collapse
i agreed. I almost bricked my armani, using twrp trying to update mokee n then it failed. reverting back to stock I got my touchscreen not working:silly: now im happy with stock rooted armani with all chinese bloatware removed

micromax canvas a1 stuck on boot animation after rooting (android marshmallow)

i updated my canvas a1 to android marshmallow, after that i rooted my device using android one tool kit after rebooting it is stuck on boot screen animation screen.
please help me

Please provide more detail or just describe what you tried and what happened.

its beacuse android m cant be rooted without flashing custom kernel. it goes into bootloop. so first download thnderzap kernel 3.5.zip , flash it and then download supersu.zip and flash it. then it will 100%work.

How to install custom recovery in a handset that is bootlooping?
Please tell us the procedure

Boot in fastboot mode and flash recovery from there .

aaqib846 said:
i updated my canvas a1 to android marshmallow, after that i rooted my device using android one tool kit after rebooting it is stuck on boot screen animation screen.
please help me
Click to expand...
Click to collapse
STEP 1: DOWNLOAD the FLASH TOOL from this this link :LINK TO DOWNLOAD FILE
It is almost 30 MB in Size. And EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) of your computer.
STEP 2: DOWNLOAD LOLLIPOP FLASH FILE
DOWNLOAD LINK FOR LOLLIPOP: HERE
After downloading this flash file EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) on your computer.
STEP 3: NOW INSTALL DRIVERS:
YOU NEED TO BE ON WINDOWS 7 TO INSTALL DRIVERS (WINDOWS 8 DOESN'T SUPPORT THIS DRIVER / PHONE IS NOT DETECTED)
DOWNLOAD DRIVERS from this link : HERE
EXTRACT AND INSTALL THE DRIVERS : Next next next and finish If you see an security warning ( a red coloured pop up ) choose INSTALL IT ANYWAY
IT IS RECOMMENDED YOU TO RESTART YOUR PC.
STEP 4:
Now we have Extrated /unziped 2 files. One is FLASHTOOLS and other is FLASH FILE and Extracted it or unziped it to Desktop or Somewhere.
One of it having the name SP_Flash_Tool_exe_windows_v5.1424.00 or open both folders then one of it having the flashing tool. OPEN THE FOLDER NAMED SP_Flash_Tool_exe_windows_v5.1424.00
it contains an application named fashtool.exe OPEN IT
NOW THE APPLICATION IS ASKING FOR SCATTER LOADING FILE
its a txt file which is on the extracted flash file folder
BROWSE it by clicking Button named Scatter Loading
click OPEN
STEP 5:
HERE IN THE DROPDOWN BOX, IT SAYS DOWNLOAD ONLY, CLICK ON IT AND SELECT FIRMWARE UPDATE ONLY.
IF YOU SELECT FORMAT + DOWNLOAD, THEN YOU WILL LOOSE IMEI NUMBER.
NOW CLICK DOWNLOAD BUTTON ( GREEN ARROWED BUTTON NAMED DOWNLOAD )
IN CASE YOU LOOSE IMEI NUMBER, THEN REFER HERE
STEP 6:
Now SWITCH OFF your PHONE and REMOVE BATTERY
STEP 7:
CONNECT your PC via USB CABLE
wait for the driver Detection.
THE FLASHING PROCESS WILL START AUTOMATICALLY you can See the progress in progress bar which is on bottom of flashing tool Application.
WHEN IT IS FINISHED DISCONNECT USB AND RESTART YOUR PHONE.
NOW YOU WILL GET LOLLIPOP UPDATE IMMEDIATELY.
NOW REFER HERE TO ROOT MARSHMALLOW
:good::good:HIT THANKS IF HELPED:good::good:

Hello friend, I followed the steps in above instructions. But after clicking download, nothing happens. I have installed all the drivers but my phone is not detecting when battery is removed. Can you help please ....

Best answer :
aaqib846 said:
i updated my canvas a1 to android marshmallow, after that i rooted my device using android one tool kit after rebooting it is stuck on boot screen animation screen.
please help me
Click to expand...
Click to collapse
Hey dude you can try this awesome way
1st install a custom recovery
2nd download CyanogenMod (avialable cm13 android version 6.0.1) from YouTube or Google
3rd download gapps for android 6 from xda developers
4th boot into recovery mode
5th wipe user data
6th wipe cache partition
7th install zip 1st CM 13
Then 2nd Gapps
8th reboot system now
Enjoy the CM13 official ROM on A1
Root access in Inbuilt
For root access :
1st go to settings
2nd go to about phone
3rd enable developer options by tapping built number 7times
4th back in developer options enable root access.
Enjoy...

canvas a1 stuck at boot animation
i flashed my a1 using sp flash it was successful. but now when i switch on my phone its stuck at animation