Develop Bugs

CWM recovery for KARBONN A18!!!

CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:

Good Job done
Built from source or using web builder?

i cant flash this through sp - tool
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits:
I, Me & Myself..
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
while downloading i got the error

reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
First Check if the MTK drivers are installed, check it by going tinto the device managers hardware section in my computer
If it is proper then try connecting your phone without the battery inserted

Same problem..
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..

i ported this recovery from a ZOPO Z900 Leader chinese android handset...i tried building from source, but i failed at it because of partition style in a18...
For people facing problems flashing it through sp tools, u all can try to flash it using another pc or alternatively view this youtube video -> http://www.youtube.com/watch?v=969xwsUTkSY

ujjwalk308 said:
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
Click to expand...
Click to collapse
Same problem here.

Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!

vshlkmr said:
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
Click to expand...
Click to collapse
Ok.now waiting for the bugfix.

reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
always usb cable error
Connect usb cable & discconet auto & charging mode
this is usb driver ????

great job. im a noob at this so will try after people posting have successfully ported the cwm to their phone

There are two recovery.img files in your attachments. recovery.img and cwmfinal.img. Which one should be used in sp flash tool?

I recently purchased Karbonn a21, can I try this on it?
Sent from my GT-I9300 using xda app-developers app

Thnx bro worked like a charm.
Sent from my Karbonn_A18 using xda app-developers app

fail root
plz send device manager screen shot

Can anyone please upload stock rom of karbonn a18. My device stock at boot animation screen.
Sent from my GT-P1000 using xda premium

reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
same problem any help pz

Cwm flashed
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?

vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
will you please give CWM for Micromax A90 specification maybe same as A18
here is Specification
Micromax A90
Super Amoled Plus LCD with 262 k
MTK6575 CPU 1 Ghz
512 MB RAM (350 - 400) User available
512 MB ROM ( its not RAM ) for apps
2.5 GB external SD for media file ( Music/Video,,,etc.)
8 Mega Pixel Camera + 0. Mega Pixel Front Camera
Android OS 4.0.3
with Rooted cell
plz help us to create new CWM + Custom ROM
also its same specification from some Chinese Brand like Zoppo / Hero / Gionnee / HDC
plz help.

Pritesh.mohan said:
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
Click to expand...
Click to collapse
You could do that before flashing Cwm aswell.. Use rom toolbox.. I did it the day I got this phone

How to root micromax a25 and orignal flash file

Hello all :
i have this phone and i succesfully rooted this phone so today i am gonna show you how to root micromax a25 smarty
download these tools : file attached
1. Remove battery dont put back and direct. connect the cable to pc and mobile and install driver
2. After install drive remove cable from mobile
3. Start sp-flash-tool with administration permission
4. Select a scatter file (there is in attachment)
5. click on download
6. connect mobile
7. you got an error ...
8. unplug cable from mobile
9. goto option > da download all > and uncheck box
10 . again click on download
11. plug your mobile ..
your mobile now updated with new bootimg
now start mobile .......
plug usb cable
select debugg mode
start SUPER ONE CLICK
click ROOT
succesfully rooted
any problem tell me here ...
all download in one :
drivers, scatter, boot, spflash, super one click
4shared. com /rar/ 6ZfdE3fe/ MICROMAX_A25_root .html

Hey dude,u are on rooting and I have made a custom rom for this phone,check forums, upgrading,modifying etc
2nd page "rom unofficial micromax a25 custom rom made by me "and see the attached pictures

Hey man, I have done it exactly your way, but I cannot get past flashing the unsecure image by SP Flash Tool. I have attached the screenshot for error. Can you suggest a solution?

And when I disable the DA Download all, a new error shows up: Partition size changed. Please help.

ALCATEL ot 918n (2.3.5 / 2.3.6) how to ROOT and install CWM RECOVERY for NOOB

NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/z71f7ao9wio6vvi/download this.zip
note --->> extract all the RAR files in DOWNLOAD THIS folder
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by TURn OFF first your ddevice then PRESS and HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Look and find the scatter text file and open it.
note: the ver of scatterfile to choose should be the same ver of your device ( ex. ur device is 2.3.6 the you should choose 2.3.6 scater file)
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/rar/a0y6F3s6/superuser.html
password:
akosikhyla
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
when your done on the steps above you should UPDATE your cwm recovery( this is important for flashing CUSTOM ROMS..etc)
>>>> follow the steps below:
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/c6gryly8x1nxu9w/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
http://www.4shared.com/zip/ijDqcind/recovery_2_3_5-6-signed.html
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
dont forget to say THANKS

zatanika said:
NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/ucdvhqlefmktgna/download this.zip
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by PRESSING HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
4. Look and find the scatter text file and open it.
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/zip/EahpxSml/Superuser-312_-efghi-signed.html
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
when your done on the steps above FLASH CMW RECOVERY by MARK, its universal CMW recovery for CUSTOMIZED ROM
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/dfvth3ep9o8bu1u/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
------> after accomplishing the steps above DL this zip file >>>>> https://www.dropbox.com/s/3d1umegiill2s3s/recovery_2_3_5-6-signed.zip
-------> put it on the root of ur sdcard then flash it
*turn off your device , vol up+power, > install zip frm sd > chose zip file then flash it..
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
dont forget to say THANKS
Click to expand...
Click to collapse
thank ypu so much your tut 100% works in my alcatel one touch 918N ,,,,

diordna_j said:
thank ypu so much your tut 100% works in my alcatel one touch 918N ,,,,
Click to expand...
Click to collapse
glad to help.. ^_^

password for superuser.rar

working fine, thank you

flipsonder29 said:
password for superuser.rar
Click to expand...
Click to collapse
password: akosikhyla

Help! After putting the downloaded zip file to my SD Card then turned off the phone and reboot by pressing the power button + volume up it displays the android symbol and Im stuck with it. Basically i cant open my phone. How can i fix this problem? please help!

ginger09 said:
Help! After putting the downloaded zip file to my SD Card then turned off the phone and reboot by pressing the power button + volume up it displays the android symbol and Im stuck with it. Basically i cant open my phone. How can i fix this problem? please help!
Click to expand...
Click to collapse
wew..why on earth u put the downloaded files on your sdcard? what files you put on it?

help
zatanika said:
NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/ucdvhqlefmktgna/download this.zip
note --->> extract all the RAR files in DOWNLOAD THIS folder
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by TURn OFF first your ddevice then PRESS and HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
4. Look and find the scatter text file and open it.
note: the ver of scatterfile to choose should be the same ver of your device ( ex. ur device is 2.3.6 the you should choose 2.3.6 scater file)
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/rar/a0y6F3s6/superuser.html
password:
akosikhyla
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
when your done on the steps above you should UPDATE your cwm recovery( this is important for flashing CUSTOM ROMS..etc)
>>>> follow the steps below:
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/dfvth3ep9o8bu1u/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
http://www.4shared.com/zip/ijDqcind/recovery_2_3_5-6-signed.html
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
dont forget to say THANKS
Click to expand...
Click to collapse
Have a nice evening.
Please us your re-upload or another file sharing site in the http://forum.xda-developers.com/show...3162&nocache=1 page before you upload "download this.zip" file since it would need.
Thank you.

^_^
links updated.. ^_^

zatanika said:
links updated.. ^_^
Click to expand...
Click to collapse
DOWNLOAD THIS >>>>>>>>>> https://
www.dropbox.com/s/z71f7ao9wi...oad%
20this.zip - download not working. update please

thanks are you ako si khyla ?
thanks for this are you ako si kyla alcatel group?:fingers-crossed:

my phone just keeps on rebooting
what happened?

*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I strictly followed all the rules but when I opened custom recovery, it stuck on the android logo (the start-up screen) for an hour.
can you please help me?

zatanika said:
links updated.. ^_^
Click to expand...
Click to collapse
i was stuck at step 3! huhuh my computer can't install my phone's driver, what shall i do?

zatanika said:
NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/z71f7ao9wio6vvi/download this.zip
note --->> extract all the RAR files in DOWNLOAD THIS folder
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by TURn OFF first your ddevice then PRESS and HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
4. Look and find the scatter text file and open it.
note: the ver of scatterfile to choose should be the same ver of your device ( ex. ur device is 2.3.6 the you should choose 2.3.6 scater file)
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/rar/a0y6F3s6/superuser.html
password:
akosikhyla
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
when your done on the steps above you should UPDATE your cwm recovery( this is important for flashing CUSTOM ROMS..etc)
>>>> follow the steps below:
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/c6gryly8x1nxu9w/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
http://www.4shared.com/zip/ijDqcind/recovery_2_3_5-6-signed.html
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
dont forget to say THANKS
Click to expand...
Click to collapse
:good: thank you so much your thread is very 100% works device :fingers-crossed:

heeelllllpppp urgent
Help! After putting the downloaded zip file to my SD Card then turned off the phone and reboot by pressing the powerbutton + volume up it displays theandroid symbol and Im stuck withit. Basically i cant open my phone. How can i fix this problem?please help!

i m facing problem
Hi
I haved followed the above procedure mentioned by u, but since then i m not getting incoming calls and and the home button also stopped working, i dont know where i made mistake but plz help me coz this is my friends phone as he was facing low memory problem so by having faith on xda i took his phone to root it and uninstall unwanted apps to free up some space.
I also tried flashing two different custom roms but it goes in boot loop and i also flashed it with stock rom again boot loop problem.
Plz hel me its urgent i had to return this phone to my friend.

My phone USB is broken. Is there any way to install recovery, or root phone from sdcard, or any other method?

pano gagawin ko ?
kuya/ate pano po ito ? natapos ko nmn po yung sa may custom recovery pero kpag nag(vol up + power) di nmn nag iba yung recovery boot :3

android one full flash (with guaranty ) + nvrm fix + imei fix as

hello android one users
this is my first post so please hit thanks .
please read full thread then do anything .
I am going to tell you how to get your mobile at the stage where you gain your warranty back ,
and your phone will appear brand new as u bought it .
1. flash stock rom with sp tool . (must have boot loader unlocked) hear http://thebroodle.com/micromax/a1/stock-rom-micromax-canvas-a1-android-one-official-stock-rom/
2. after successfully flash start your phone and enable usb debugging
(settings ->about phone->tap 4-7 times Build number now go back to Developer options ->usb debugging )
also enable unknown source
(settings ->security -> unknown source )
3. u must have installed your phones usb driver and phone must have some charge to survive at least 15 min . hear http://www.theandroidsoul.com/downl...501-drivers-usb-adb-windows-8-1-8-7-vista-xp/
4. download the tool named ALL-IN-ONE-TOOL hear http://forum.xda-developers.com/cro...l/tool-master-tool-unlock-bootloader-t2997696
5.download fix all a1 hear https://drive.google.com/file/d/0Bw6KjdLHY2s0MkFrZUdNVVpLM28/view?usp=sharing
and create imei by this http://forum.xda-developers.com/showthread.php?t=2399037
copy the created imei file named "MP0B_001" to
fix all for a1.zip\data\nvram\md\NVRAM\NVD_IMEI copy and replace ( just drag and drop )
then place this zip to your phone sd card .
6. extract it and open all in tool .exe . it take a while .
follow instructions
when the main menu comes type 4 to select custom recovery
it will ask is your bootloader unlocked ?
type 2 "no" .
then it ask choose recovery
type 1 "cwm recovery " .
now connect your phone and see your device must show usb debugging . tick if your phone say something like pc or lapi mac address.
7. now your phone boot into recovery
use up down button and power button to select
go to install zip (second option )
install zip from sd select the zip from sd
press power button and flash zip
______________________
reboot
done
now you have your warranty
working imei
and nvrm in wifi fix .
and your phone is unrooted .
you can install lollipop ota . (when it comes)
A. if your phone working fine after flashing stock rom then leave rest of the steps .
B. if you facing only nvrm error in wifi then then download this zip hear https://drive.google.com/file/d/0Bw6KjdLHY2s0c0trcC1KNTVJQzA/view?usp=sharing
and flash it into recovery
c. if imei + nvrm not working do all steps .
y. please hit Thanks and tell me if any error in this .
z. thanks xda and all known unknown sorces and dev.
thanks
http://forum.xda-developers.com/showthread.php?t=2399037 for imei
http://forum.xda-developers.com/cro...l/tool-master-tool-unlock-bootloader-t2997696 all in one tool
http://thebroodle.com/micromax/a1/stock-rom-micromax-canvas-a1-android-one-official-stock-rom/ stock rom
http://www.theandroidsoul.com/downl...501-drivers-usb-adb-windows-8-1-8-7-vista-xp/ driver
https://drive.google.com/file/d/0Bw6KjdLHY2s0MkFrZUdNVVpLM28/view?usp=sharing fix all
https://drive.google.com/file/d/0Bw6KjdLHY2s0c0trcC1KNTVJQzA/view?usp=sharing nvrm fix
i am not responsible for any kind of error or break . do at your own risk . (its safe {i think })

wifi stuck on "turning wifi on" :'(
i unlocked the bootloader and flashed 5.1 initially (it got some wifi connection problems) so flashed cm12 which makes my wifi to stuck at "Turning wifi on"
now to make things straight i went back to my stock version 4.4.4 which still doesn't fix my problem
some one please help me......................

I did it in this way.
Use sp flash tools and flash stock rom. select firmware upgrade. done.

Vibe P1 Dead

Had screen error before so i cannot unlock phone to retrieve photos and videos. Tried flashing but basically bricked the unit since im a noob. Now it wont turn on, I have "unrecognized usb device" error when plugged to PC. How can I revive the unit and is the data still retrievable?

Yes,you can try the following steps but I cannot give you full gurantee that it will work. Anyways trying is better than nothing.
Download files using this link: https://docs.google.com/uc?id=0BzeT4pCC5KBxcGVadWtZV0ExZXM
Download drivers using this link: http://www.mediafire.com/?bhm18trn6imms5y
Now follow the steps
Step 1: Download Lenovo P1 Stock ROM Firmware zip file in your PC and extract it. (It includes Scatter files, SP Flash Tool, and Drivers).
Step 2: Download Lenovo USB Drivers and install it PC.
Step 3: Go to extracted folder “extracted in Step 1” > SP flash tool > you will see Flash-Tool.exe > Open this to Launch setup.
Step 4: One setup is launched Click on > Download Tab > Scatter Loading. Now locate scatter firmware file (Present firmware folder extracted in Step 1) and load it.
Step 5: Connect your device with PC via data cable Now click on Download Button / Upgrade Button (having sign of Green Arrow) to begin flash Flashing.
Step 6: Wait Until process complete. In end of Successful Flash Lenovo P1 Stock ROM Firmware, a Green dot / ring will appears.
Maybe your mobile will become working but you will not recover any data
ALL THE BEST
Regards milkyway3

Leave it to discharge itself (takes up to 3-4 days, on my experience) then use the steps given above. It "ressurected" my unit which was able to power up but the screen wouldn't turn on.