[COT] Recovery for Micromax A44 Punk - Upgrading, Modifying and Unlocking

COT recovery For Micromax A44​:victory::highfive::good:
Hi Guys!!
another great news ..... last night i tried to port the stock recovery.img to COT recovery... and it was successful ..... i am very happy that now we have two Recoveries for This Little Device.. and if you own a Micromax A44 punk then your problems about recovery and rooting is solved....
I have already Uploaded the CWMRecovery 6 and fully rooted Stock ROM will be uploaded soon....
You can flash these using the sp flash Tool i have attached on the attachments below....
Now i would like to thank Master Shifu for that amazing tool for COT recovery..... and yuweng.... COT team, CWM team.....:highfive:
What is COT recovery:
Want to know Click here.....:laugh:
HOW To Flash COT Recovery into Your Device:
Now there are two methods one using mobile uncle tool or using the sp flash tool....
1st Method: (Will work Only on Rooted Device if you have already rooted your A44 using unlock root.)
If you have a rooted Device, simply use this mobile uncle tool, put the recovery i provided in the root of your SD Card, download and install Mobile uncle from play store or downlaod from attachments below... install the apk and then everything is easy.... just follow steps...
2nd Method:
Downlaod sp Flash Tool from attachments,
Load scatter file..... browse recovery..... dissconnect your phone from pc/laptop..... remove battery ... put you battery back ,.... do not connect you phone to usb or turn on the battery do not touch any buttons on the phone...... now after loading the recovery.img .. make sure only recovery is ticked and rest are unticked ... if not then untick it yourself.. as we are only going to flash recovery only..... ...
Press download button... a message will appear on the right bottom corner to connect the USB cable in XX seconds... so now connect the USB cable before XX seconds and a progress bar will appear.. let it complete.. and you will see the green circle... close the window and sp flash tool.. and boot into recovery....
You know how to enter into recovery Power + vol up simultaneously ......
Enjoy COT recovery..... with Micromax a44 Punk....
Note: You agree that you are doing this at your own risk...

help i beg u
plz help me im aswin im using mm a44 phone i hv wrongly deleted dialer from app folder &i hv wrongly gaven factory reset now i cant even turn on usb debugging plzz help me :crying:

Related

CWM recovery for KARBONN A18!!!

CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Good Job done
Built from source or using web builder?
i cant flash this through sp - tool
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits:
I, Me & Myself..
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
while downloading i got the error
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
First Check if the MTK drivers are installed, check it by going tinto the device managers hardware section in my computer
If it is proper then try connecting your phone without the battery inserted
Same problem..
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
i ported this recovery from a ZOPO Z900 Leader chinese android handset...i tried building from source, but i failed at it because of partition style in a18...
For people facing problems flashing it through sp tools, u all can try to flash it using another pc or alternatively view this youtube video -> http://www.youtube.com/watch?v=969xwsUTkSY
ujjwalk308 said:
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
Click to expand...
Click to collapse
Same problem here.
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
vshlkmr said:
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
Click to expand...
Click to collapse
Ok.now waiting for the bugfix.
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
always usb cable error
Connect usb cable & discconet auto & charging mode
this is usb driver ????
great job. im a noob at this so will try after people posting have successfully ported the cwm to their phone
There are two recovery.img files in your attachments. recovery.img and cwmfinal.img. Which one should be used in sp flash tool?
I recently purchased Karbonn a21, can I try this on it?
Sent from my GT-I9300 using xda app-developers app
Thnx bro worked like a charm.
Sent from my Karbonn_A18 using xda app-developers app
fail root
plz send device manager screen shot
Can anyone please upload stock rom of karbonn a18. My device stock at boot animation screen.
Sent from my GT-P1000 using xda premium
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
same problem any help pz
Cwm flashed
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
will you please give CWM for Micromax A90 specification maybe same as A18
here is Specification
Micromax A90
Super Amoled Plus LCD with 262 k
MTK6575 CPU 1 Ghz
512 MB RAM (350 - 400) User available
512 MB ROM ( its not RAM ) for apps
2.5 GB external SD for media file ( Music/Video,,,etc.)
8 Mega Pixel Camera + 0. Mega Pixel Front Camera
Android OS 4.0.3
with Rooted cell
plz help us to create new CWM + Custom ROM
also its same specification from some Chinese Brand like Zoppo / Hero / Gionnee / HDC
plz help.
Pritesh.mohan said:
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
Click to expand...
Click to collapse
You could do that before flashing Cwm aswell.. Use rom toolbox.. I did it the day I got this phone

How to root micromax a25 and orignal flash file

Hello all :
i have this phone and i succesfully rooted this phone so today i am gonna show you how to root micromax a25 smarty
download these tools : file attached
1. Remove battery dont put back and direct. connect the cable to pc and mobile and install driver
2. After install drive remove cable from mobile
3. Start sp-flash-tool with administration permission
4. Select a scatter file (there is in attachment)
5. click on download
6. connect mobile
7. you got an error ...
8. unplug cable from mobile
9. goto option > da download all > and uncheck box
10 . again click on download
11. plug your mobile ..
your mobile now updated with new bootimg
now start mobile .......
plug usb cable
select debugg mode
start SUPER ONE CLICK
click ROOT
succesfully rooted
any problem tell me here ...
all download in one :
drivers, scatter, boot, spflash, super one click
4shared. com /rar/ 6ZfdE3fe/ MICROMAX_A25_root .html
Hey dude,u are on rooting and I have made a custom rom for this phone,check forums, upgrading,modifying etc
2nd page "rom unofficial micromax a25 custom rom made by me "and see the attached pictures
Hey man, I have done it exactly your way, but I cannot get past flashing the unsecure image by SP Flash Tool. I have attached the screenshot for error. Can you suggest a solution?
And when I disable the DA Download all, a new error shows up: Partition size changed. Please help.

[GUIDE]Root Xolo HIVE 8x-1000 and other MTKxxxx impossible to root devices easily!

Hello all XDA Members and others who are viewing this thread.
I finally found a way to root the IMPOSSIBLE TO ROOT MediaTek devices!
I personally used it on Xolo HIVE 8x-1000 MT6592M with 2 Gb RAM 1.4 Ghz Octa Core Processor MT6592M.
Devices that won't be rootable by apps like Kingo Root, Vroot(for a certain time), Framaroot, towelroot etc can be rooted and have CWM recovery installed.
Xolo HIVE 8x-1000 users can also follow this guide created by The Android Soul for picture tutorial. : Click Here
Note : If you're rooted but want to install CWM then follow this guide to create CWM and flash it via SP Flash Tool or Just copy the created recovery and flash it via Rashr (Download from play store)
Let's get started without wasting time.
Things you'll need MTK Drivers : All MTK Drivers 2014
Your Phone with USB Debugging Mode turned on in Developer Section
Usb Cable and most Important
A Calm head :silly:
A video is already available link is in 1st point.
Code:
[B][SIZE="3"]Warning Rooting Voids warranty. I would in any means not be responsible for dead devices, bricked SD cards or any other activity that leads to damage of your device. If you know the risks still want to continue then go ahead.[/SIZE][/B]
First we would like to load scatter file for our device. Process in the video link in 1st point.
Disconnect the phone's battery (if any) [ IN CASE OF XOLO HIVE JUST SWITCH OFF THE DEVICE THEN WAIT FOR 30 seconds and connect the device ] and then press volume up button and connect it with PC it will connect device in preloader mode.
1) We would like to have a backup of our UNROOTED stock ROM. Download MTK Droid Tools (Google it) and then use this method to backup your UNROOTED stock ROM. It is basically Read Back method from SP Flash tool Follow this video tutorial : How to backup unrooted stock ROM
Warning : Please do not continue this tutorial if your device has fake information or any kind of restriction or ubifs file system or you'll brick the device. You have been warned.
This is a text guide for the video :
2) After backup extract the firmware you created using MTK Droid Tools. Process given in video.
3)Now when you get boot.img for your device you're good to go
4) Open MTK Droid tools with administrative privileges and make sure your phone is connected and then migrate to root,backup,recovery tab and click the option to choose boot.img from and locate your stock boot image and make a CWM recovery from it.
5) Wait for process to complete and then check recovery folder inside MTK Droid tools folder. There you'll find two files
Code:
[COLOR="Red"][B]XXXX_bootpatched.img & XXXX_recovery.img[/B][/COLOR]
6) Now open SP flash tool and load the MTKXXXX_Android_scatter_txt and untick every option except for boot.img and recovery.img. Then click on both tabs and locate the modified images created by MTK Droid tools which can be found in recovery folder itself if you haven't moved them.
7) Make sure your phone isn't connected at this time and then hit download button in SP Flash Tool and then with phone's battery removed with volume up button pressed connect it to PC and then flash process will begin. After completion you'll see a green circle at that point disconnect your phone and switch it on. Don't disturb the phone until flashing completes and you see a green circle.
Congratulations! You have CWM Recovery for your device without ROOT!
ROOTING
1) Now download this zip file and flash it via CWM Recovery. SuperSU.zip and reboot.
Congo many will get root access now but not Xolo HIVE You do need to flash this zip. Users that don't get root after flashing supersu zip can also continue further.
2) Download Vroot from here and install it.
3) Connect your phone with USB Debugging on and wait till it detects your device.
4) Now click root button and voila you're rooted!
Now reboot and you'll see the superuser app Now you'll have two Superuser apps (NOT XOLO HIVE USERS) SuperSU from flash and Superuser from Vroot. Not to worry just open SuperSU and it will automatically ask to remove the other Superuser app choose that and reboot and you're done
Luckily those who don't want or find complication in SP Tool Read back method, just download the stock ROM for your device and extract boot.img from it and then follow same steps from 4th step at the beginning from where to create CWM for your device.
I suggest use androidxda.com for most stock ROM's.
Xolo HIVE 8x-1000 users don't Panic I have your CWM and Boot image ready Just download from here : Xolo HIVE Recovery.img
Xolo HIVE Boot Patched.img.
KINDLY DON'T MIRROR MY FILES. IF YOU WANT TO SHARE GIVE THIS LINK TO PEOPLE.
Xolo HIVE users I saved your work upto step 5 from step 6 ,i.e, flashing you need to do manually
I know it's a long and complicated process but it is only method working until a new exploit is available to root the impossible mtk devices.
Conisder me a donation if you can as it will help me to make more guides and apps
If you cant donate hit thanks :good:
That won't cost you!
EDIT : I am adding Xolo MT6592 scatter file too in case you can't generate it. Remember to load scatter file uncheck all options leaving boot.img and recovery.img then flash the boot and recovery I provided ONLY XOLO HIVE USERS
Tech N You said:
Hello all XDA Members and others who are viewing this thread.
I finally found a way to root the IMPOSSIBLE TO ROOT MediaTek devices!
I personally used it on Xolo HIVE 8x-1000 MT6592M with 2 Gb RAM 1.4 Ghz Octa Core Processor MT6592M.
Devices that won't be rootable by apps like Kingo Root, Vroot(for a certain time), Framaroot, towelroot etc can be rooted and have CWM .
Click to expand...
Click to collapse
bro i want to ask you about the scatter file, because you have not provided that and it is most useful. i have a xolo hive 8x 1000 and when i am trying to generate scatter file then this error comes. and i have read that this can brick the phone. And the person in the video you suggested in step 1 also said in his video not to proceed if any error comes. so please help.
Scatter file can be easily made :?
You just have to click block path tab it won't brick :/
Also I have provided Xolo HIVE recovery and bootpatched file! Just download this and flash it via SP Flash Tool! You can create scatter yourself! Watch the video!
Connect your phone with USB Debugging on and connect to PC and let mtk droid tools read it.When it does then you click on blocks map tab!
Sent from my 8x-1000 using XDA Free mobile app
Added the scatter file there you go check the post
Tech N You said:
Added the scatter file there you go check the post
Click to expand...
Click to collapse
Alright bro thanku so much..
And if u have rooted your xolo 8x 1000 then please provide a video link or tutorial. Thnxx
What above I wrote is tutorial only
Switch off the phone open sp flash tools load scatter file and uncheck all boxes excluding boot.img and recovery.img make sure you downloaded the recovery.img and boot.img I attached in the post, just locate my given recovery.img and boot.img and click download button on sp flastool then connect your phone while u keep the volume up button pressed. Now the process will begin and it will give a green circle on successful completion. Switch on the device install vroot on PC I gave link in thread then just connect your phone with USB debugging on and then wait for Vroot to detect the phone then click root and you're done.
Sent from my 8x-1000 using XDA Free mobile app
Tech N You said:
What above I wrote is tutorial only
Switch off the phone open sp flash tools load scatter file and uncheck all boxes excluding boot.img and recovery.img make sure you downloaded the recovery.img and boot.img I attached in the post, just locate my given recovery.img and boot.img and click download button on sp flastool then connect your phone while u keep the volume up button pressed. Now the process will begin and it will give a green circle on successful completion. Switch on the device install vroot on PC I gave link in thread then just connect your phone with USB debugging on and then wait for Vroot to detect the phone then click root and you're done.
Sent from my 8x-1000 using XDA Free mobile app
Click to expand...
Click to collapse
y so rude? and please tell me about this. sp flash tool is not detecting my phone i exactly followed what u have said above but no success. tried installing pdanet 3 times with my phone connected even installed drivers manually with signature enforcing off.
Install all mtk drivers from the link I gave in the thread and before installing them make sure to delete the previous drivers
Sent from my 8x-1000 using XDA Free mobile app
Tech N You said:
Install all mtk drivers from the link I gave in the thread and before installing them make sure to delete the previous drivers
Sent from my 8x-1000 using XDA Free mobile app
Click to expand...
Click to collapse
ok i did it thanxx bro.
Anytime
Sent from my 8x-1000 using XDA Free mobile app
See the method to root kitkat 4.4.2 for C2C, link in my signature, flashing that zip will root any device with kitkat/Jellybean, no need to use vroot
umangleekha said:
See the method to root kitkat 4.4.2 for C2C, link in my signature, flashing that zip will root any device with kitkat/Jellybean, no need to use vroot
Click to expand...
Click to collapse
Flashing cwm recovery via sp flashtool doesn't makes you rooted. It just replaces stock recovery
Tech N You said:
Flashing cwm recovery via sp flashtool doesn't makes you rooted. It just replaces stock recovery
Click to expand...
Click to collapse
Read carefully, after flashing cwm, i said to flash that root zip, and after flashing that root zip, no need to use vroot or other methods
umangleekha said:
Read carefully, after flashing cwm, i said to flash that root zip, and after flashing that root zip, no need to use vroot or other methods
Click to expand...
Click to collapse
Well nothing worked for Xolo Hive if you read my guide too. Flashing SuperSU.zip ends up in a infinite binary update with failure
can you please root xolo 8x-1100
i also don't have pc
I certainly have helped rooting Xolo 8x-1100 and 8x-1200 to a member.
You need PC for flashing boot.img and recovery.img, Sorry my friend: (
Or try rooting via towelroot first then tell me if you succeed.
Also download your stock ROM from here and send me the recovery.img from it follow this link and download : Xolo Play 8x-1100 stock rom
Sent from my 8x-1000 using XDA Free mobile app
badshah.mb said:
can you please root xolo 8x-1100
i also don't have pc
Click to expand...
Click to collapse
Check my above post
xolo 8x 1000
successfully rooted the xolo 8x 1000 with iroot....thanks man
Problem with the root
unable to flash custom recovery even after following every step to the dot. What might the problem be?
my phone isnt rooted im trying to root my phone.
BUT CANNOT
kindly find a solution.
Stuck at bootloop.
Guys,I'm stuck at the boot logo.
Nothing is working.Neither CWM recovery nor ADB. Please help me and give a CWM recovery zip file.

steps to root iball slide 6351 q40i

iball 6351 q40i rooting gide
steps to root :
1. download new (updated) kingo ROOT for pc & install it.
2. open setting>devloper options & tick USB debugging on your tab
3. connect to pc via usb cable to pc
4. your pc should have internet connection
5. open kingo root and click "Root" button
wait few minutes and finally it show rooting successful
congratulations ! your tab has rooted !!
please don't forgot to press "thanks" button if this post is help full.
please wait guys... now diploma exams are infront of me after complete my examination I will give cwm recovery, custom rom, stock rom & much more........
_Shridhar hegde_ said:
iball 6351 q40i rooting gide
steps to root :
1. download new (updated) kingo ROOT for pc & install it.
2. open setting>devloper options & tick USB debugging on your tab
3. connect to pc via usb cable to pc
4. your pc should have internet connection
5. open kingo root and click "Root" button
wait few minutes and finally it show rooting successful
congratulations ! your tab has rooted !!
please don't forgot to press "thanks" button if this post is help full.
please wait guys... now diploma exams are infront of me after complete my examination I will give cwm recovery, custom rom, stock rom & much more........
Click to expand...
Click to collapse
I have successfully rooted my tablet using latest iRoot software. But i cannot install custom recovery for my tablet because tablet has UBIFS and CWM and CTR does not support UBIFS. TWRP supports UBIFS and i used its automatic porting tool but tablet does not boot into recovery even after successful flash. When ur diploma exams gets over then contact me. we will together make custom recovery. Also there is not stock rom uploaded to internet for this tablet. We do need a custom recovery to take nandroid backup. :good:
Sent from my A54 using XDA Free mobile app
I am also again and again trying to manually port by unpack & repacking with apktool.apk. properly boot in to recovery , but unfortunately always i get same error " E can't mount cache" also system & data. how to fix this problem? is wrong in recovery.fstab or chmod in other xx.rc files?
Please help me mate..
iball slide q40i firmware
Something went wrong with my iball slide q40i tab can you give me original firmware please.
I dumped all factory images. Stock recovery is ok. But dumped system.img is not flashing with fastboot. If we remove unwanted files in system and repack with linux it may flash.. hope..
_Shridhar hegde_ said:
iball 6351 q40i rooting gide
steps to root :
1. download new (updated) kingo ROOT for pc & install it.
2. open setting>devloper options & tick USB debugging on your tab
3. connect to pc via usb cable to pc
4. your pc should have internet connection
5. open kingo root and click "Root" button
wait few minutes and finally it show rooting successful
congratulations ! your tab has rooted !!
please don't forgot to press "thanks" button if this post is help full.
please wait guys... now diploma exams are infront of me after complete my examination I will give cwm recovery, custom rom, stock rom & much more........
Click to expand...
Click to collapse
Did you make the custom rom ???

100%&100% working ROOT TWRP Recovery & bootloop restart solution LeTV Le1s x507&x509

100%&100% working ROOT TWRP Recovery & bootloop restart solution LeTV Le1s x507&x509
TWRP Recovery & root & bootloop restart
solution LeTV Le1s x507&x509 Indian Version
No more brick and bootloop problem
100%tested solution 8s&14s​
New Method added
18/05/2016
Backup all internal storage
install pdanet and preloder driver​https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
http://pdanet.co/a/​
restart pc
Download new Rar file​https://drive.google.com/file/d/0B5KBP3GG99Q2aU1wNnYwakliUHM/view?usp=sharing?​Extract folder Desktop
Go to mobile settings >> About Phone >>
tap Version 7 Times and hit back
U will have a new option just
above the About Phone option called Developer Options
open it and select USB Debugging
Connect the mobile with pc through USB cable
how to unlock bootloder
duble click recovery bat press any key to enter fastboot mode
After it Reboots
close cmd.exe
press shift+right click select open command windows here
Type fastboot oem unlock HIT ENTER
press volume up confirm NOW THE BOOTLOADER IS UNLOCKED
how to install recovery
duble click recovery bat
press A key to Flash recovery img
again press a akey
switch off the mobile press 10 second power key
now mobile is boot loop
dont worry
open sp tool and flash user data
connect ur mobile Screen blank condition and wait for the process to finish
done
Remove usb cable
Most important
after flash userdata dont power on mobile
press volume up+power
first boot
leave both key showing letv logo
How To root
Start the mobile open twrp folder copy the Superuser.zip file to memory
Go to updater app and select reboot to recovery
select Install select superuser.zip swipe to install
done
Q.I completed the procedure as mentioned in tutorial, everything goes well even sptool download, but when I boot to recovery mode to install supersu the phone boots to stock recovery mode and not the twrp mode. Tried atlest ten times but same problem. How I can boot to twrp mode
Answer .after flash userdata dont power on mobile
press volume up+power first boot
leave both key showing letv logo
Video tutorial​​https://www.youtube.com/watch?v=v9X-a1DmU-g​
naeem210 said:
TWRP Recovery & root & bootloop restart
solution LeTV Le1s x507 Indian Version
No more brick and bootloop problem
100%tested solution
New Method added
24/04/2015
Twrp.3.0
Backup all internal storage
install pdanet and preloder driver
https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
http://pdanet.co/a/
Download new Twrp Rar file
https://drive.google.com/file/d/0B5KBP3GG99Q2NUpJSGVhWlB3X1E/view
Extract twrp folder Desktop
Go to mobile settings >> About Phone >>
tap Version 7 Times and hit back
U will have a new option just
above the About Phone option called Developer Options
open it and select USB Debugging
Connect the mobile with pc through USB cable
duble click recovery bat press any key to enter fastboot mode
After it Reboots
close cmd.exe
press shift+right click select open command windows here
Type fastboot oem unlock HIT ENTER
press volume up confirm NOW THE BOOTLOADER IS UNLOCKED
duble click recovery bat
press A key to Flash recovery img
again press a akey
switch off the mobile press 10 second power key
now mobile is boot loop
dont worry
open sp tool and flash user data
connect ur mobile Screen blank condition and wait for the process to finish
done
How To root
Start the mobile open twrp folder copy the Superuser.zip file to memory
Go to updater app and select reboot to recovery
select Install select superuser.zip swipe to install
done
Video tutorial
http://forum.le.com/in/index.php?th...-solution-letv-le1s-x507-new-method-add.1155/
Click to expand...
Click to collapse
Working!! Thanx
Hi , The Sp Tool does not show any progress at all.
I watched the video , connected the phone while it was blank , still SP tool remains stuck in Download forever and the phone keep looping.
Please help thanks
I tied in Windows 10 as well as Windows 7 64bit
csifreeman said:
Hi , The Sp Tool does not show any progress at all.
I watched the video , connected the phone while it was blank , still SP tool remains stuck in Download forever and the phone keep looping.
Please help thanks
I tied in Windows 10 as well as Windows 7 64bit
Click to expand...
Click to collapse
Nevermind, I used the new method you posted , which was x509 and it worked.
Thanks
compatible with Le 1s Eco?
will this method work with LeEco Le 1s Eco version - Le X509 aswell?
Can u give me stock recovery.img please of le eco 1s x509
can install on x501?
strangely i didnt have to flash the user data..maybe because i am in official marshmallow rom
By unlocking bootloader waranty will void?
What is the new method?
csifreeman said:
Nevermind, I used the new method you posted , which was x509 and it worked.
Thanks
Click to expand...
Click to collapse
What is the new method? As my phone is bricked after I used thus now can't do anything, any advice please.
If any one have le 1s related problem and solution or any one want to try new rom or kernal asap then all of u are welcome in our group on telegram so plz join with us
Requriemt
1. Download telegram from play store
2. Just click below link
https://telegram.me/LeSuperGroup
Thanks all of u
otg support or not tell me fast ?????
Twrp
How to install Twrp in letv le1s x507 Android 5.0.2 (Eui 5.5.008S?
Prabhmeet13 said:
How to install Twrp in letv le1s x507 Android 5.0.2 (Eui 5.5.008S?
Click to expand...
Click to collapse
If u want to use custom ROM or Chinese version upgraded version of ROM then u have to upgrade you official ROM version from lollipop to marshmallow (eui 19s) if you don't want to do that and happy with lollipop ROM and stick with it then u have to install kingroot app for rooting mobile ROM
Then install twrp app or fleasify from ply store
Then download twrp version 2.8.6or7 or otherwise 3.0.2
Image file
If you use twrp official app then find with code name x3 (le 1s eco) then application demand u certain permission then do so rest app can do automatically
If u use fleashify then download official twrp image file rename it to recovery. Img. And place such file into ur SD card or internal storage openly (not put such file into any folder )
Rest process can do the app itsalf if you open the app just follow procedure as app demand u
If u have any problem in above process just search in you tube
You can find both app application process
Thanks for read out such long post
sumitgp said:
If u want to use custom ROM or Chinese version upgraded version of ROM then u have to upgrade you official ROM version from lollipop to marshmallow (eui 19s) if you don't want to do that and happy with lollipop ROM and stick with it then u have to install kingroot app for rooting mobile ROM
Then install twrp app or fleasify from ply store
Then download twrp version 2.8.6or7 or otherwise 3.0.2
Image file
If you use twrp official app then find with code name x3 (le 1s eco) then application demand u certain permission then do so rest app can do automatically
If u use fleashify then download official twrp image file rename it to recovery. Img. And place such file into ur SD card or internal storage openly (not put such file into any folder )
Rest process can do the app itsalf if you open the app just follow procedure as app demand u
If u have any problem in above process just search in you tube
You can find both app application process
Thanks for read out such long post
Click to expand...
Click to collapse
when i boot in recovery only show LETV logo and after automatically reboot phone normally i didn't see any recovery in my phone what can i do?
Im not able to flash user data.. actually i unlocked bootloader in my le1s and wen im clicking on boatloder option in twrp it shows device verification failed ur device might work impropely..not able to flash userdata in sp tool option kindly guide me
Sent from my Le X507 using Tapatalk
asif2017 said:
Im not able to flash user data.. actually i unlocked bootloader in my le1s and wen im clicking on boatloder option in twrp it shows device verification failed ur device might work impropely..not able to flash userdata in sp tool option kindly guide me
Click to expand...
Click to collapse
Bro just PM to naneem bro
Just go to 1st page of this trend and click on naeem profile u found PM tab
brom error s_brom_download_da_fail (2004)
nice
Kk

Categories

Resources