Hi guys,
I was trying to root my Galaxy nexus with Odin and chose the wrong CF root file! (The one for SGS3).
Now it seems kinda bricked and I would appreciate any help to get out of this mode, which looks just like this:
(I may not post any url - gz -.-)
Device ----- Yellow Warning Symbol ----- Desktop
just without the text.
I cant boot normally, download mode or recovery.
I appreciate eny help to get this fixed!
Greets
Samsung galaxy nexus? Not sure if it is supported by samsung kies but try using the emergency firmware installation. May work.
d4c said:
Samsung galaxy nexus? Not sure if it is supported by samsung kies but try using the emergency firmware installation. May work.
Click to expand...
Click to collapse
Yes SG Nexus, I'll give it a try
Kies isn't able to recognize the device.
When I installed it, it said I have to disconnect the Samsung device.
But there's nothing I can do now
Tass1lo said:
Kies isn't able to recognize the device.
When I installed it, it said I have to disconnect the Samsung device.
But there's nothing I can do now
Click to expand...
Click to collapse
If I remember rightly the phone does not need to be recognised. Go through the process of emergency firmware update and it will install everything based on your device and serial number. Try it.
did your PC recognize the gnex when you plug it in?
Sent from my Galaxy Nexus using xda app-developers app
OMAP flash?
nunodias said:
did your PC recognize the gnex when you plug it in?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
If you have desktop you are away to far from a bricked phone... Use this
http://forum.xda-developers.com/showthread.php?t=1392310 read carefully if you want to do this stuff to your phone you should know what your doing... By the question that you made i can tell that you are a noob. When you finish the process download a cyanogen ROM in here http://get.cm/?device=maguro&type=nightly dont forget to flash GAPPS
Sent from my Galaxy Nexus using xda app-developers app
In Kies there is a list of devices for the emergeny recovery, which is empty in my case.
Windows recognizes that a Samsung mobile USB CDC Composite Device is connected.
Forget kies.. Download TOOLKIT and follow the steps
Sent from my Galaxy Nexus using xda app-developers app
nunodias said:
Forget kies.. Download TOOLKIT and follow the steps
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Follow which steps? Everything I can to needs ADB or Fastboot, which is not available
Download this http://forum.xda-developers.com/showthread.php?t=1392310
Go to setting- developer options - mark USB debbuging.
Open the toolkit after you installed and tell me when you done this
Sent from my Galaxy Nexus using xda app-developers app
I can't boot my device. No access via adb or anything. No boot to recovery/download mode or normal boot!
Developing via USB was on, but it doenst help in any way. As soon i am allowed to post urls I can show you a pic of the screen I'm stuck ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This without the graphics bug it is
The phone stays in that all the time?
Sent from my Galaxy Nexus using xda app-developers app
Yes, the only thing I can do is swtiching screen on and off..
pull out the battery and without battery connect the USB cable and try to go into download mode pushing the volume down.
Sent from my Galaxy Nexus using xda app-developers app
Phone won't do anything like that. Seems it needs the battery
Ye... You're right most of the phones start witought baterry this not
When you push the the Power button and volume down what happend? Black screen or open the same screen that you show?
Sent from my Galaxy Nexus using xda app-developers app
With battery the same screens is coming,...
I guess I broke ther Kernel or somewhat..
Ye.. You messed up a litlle bit... But if the phone turns on it's very possible to resolve that... Did you tried the toolkit?
Sent from my Galaxy Nexus using xda app-developers app
Related
ok so my samsung s3 one day just decided not to turn on or do anything. not one screen will work. i bout gave up on it but i found out it shows a red led when i put it on charge (with out the battery in) . that is the absolute only thing i can make it do. ive never even droped this phone before... any ideas? please guys.. please help
If you want help, you need to give a ton more info. You say bricked, so it was rooted, you flashed a custom ROM.... What have you done to your phone??
codey895 said:
ok so my samsung s3 one day just decided not to turn on or do anything. not one screen will work. i bout gave up on it but i found out it shows a red led when i put it on charge (with out the battery in) . that is the absolute only thing i can make it do. ive never even droped this phone before... any ideas? please guys.. please help
Click to expand...
Click to collapse
Im having the exact same problem i have rooted my brothers s3 with cwm and he flash a kernel of an gti9300 the phone wont boot and do anything!when i plug in the pc says qhusb_dload and i have manage to find the drivers odin recognize the phone but got stck on setting up conection so it cant be flashed i knw someone probably could help or give an good idea for what to do ive been working for about 4hr only to make odin recognise the phone
Sent from my SAMSUNG-SGH-T989 using xda premium
marcos600rr said:
Im having the exact same problem i have rooted my brothers s3 with cwm and he flash a kernel of an gti9300 the phone wont boot and do anything!when i plug in the pc says qhusb_dload and i have manage to find the drivers odin recognize the phone but got stck on setting up conection so it cant be flashed i knw someone probably could help or give an good idea for what to do ive been working for about 4hr only to make odin recognise the phone
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Can you get it to boot into download mode??
Vol down+home+power
i told you all the info, the phone was rooted and ran fine for weeks on hell fire rom. i never droped it. it just simply stoped working. not from flashing anything. or atleast i dont think. i havent flashed things since weeks before.
werked said:
Can you get it to boot into download mode??
Vol down+home+power
Click to expand...
Click to collapse
Nop not responding but the pc recognise it
Sent from my SAMSUNG-SGH-T989 using xda premium
marcos600rr said:
Nop not responding but the pc recognise it
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
If odin recognized.... This is good. I know this may sound trivial and I'm not insulting your intelligence in any way.... BUT are you using a good usb??
Do either of you have a jig
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This $3 item will get you back into DL mode
TonyStark said:
Do either of you have a jig
This $3 item will get you back into DL mode
Click to expand...
Click to collapse
Yes and no go! Send it to jtag:banghead:
Sent from my GT-I9300 using xda premium
Have you tried contacting AT&T warranty center? I did a bad flash on my S3 and fully bricked it. AT&T swapped it out without question. I was even able to drive to one of their local offices (not stores) to replace it without waiting for one to be mailed.
werked said:
If odin recognized.... This is good. I know this may sound trivial and I'm not insulting your intelligence in any way.... BUT are you using a good usb??
Click to expand...
Click to collapse
+1 Solid USB is a must for this type of work
+1 Odin recognition - if Odin recognizes the device, you can generally save the phone.
Ive had this phone for about a week and it came with software version bell 20e on ICS. My WiFi worked but was only able to get gsm data speed.(below 3g). I tried flashing many ROMs but my WiFi wouldn't work on any of them (only on the ICS Rom the phone came with). Then I tried 2 unbrick method to try and flash a new baseband/firmware (not sure which is which)... the first one gave me the original Korean ROM with all the Korean apps(I believe it was 18f kdz). The second one gave me the att ROM (10f kdz). The Korean one gave me WiFi and data but I could not root (tries superoneclick a million times and also tried manual cmd method). The att one gave no WiFi and I haven't tried the data.
My main goal is to be rooted so I can flash cm 10 or 10.1 with at least 3g data and WiFi. I actually really like this phone but all these road bumps are making me want to settle with my old phone optimus 2x. Can anyone help me please? The phone came from China I believe. My carrier is fido in Canada.
Sent from my LG-P990 using xda app-developers app
Nobody? Looks like I'll have to figure it out myself.
Sent from my LG-P990 using xda app-developers app
This is my current software... non of the rooting methods seem to be working. Come on someone help me out.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-SU640 using xda app-developers app
I'm new to the rooting but i use
http://forum.xda-developers.com/showthread.php?t=2044645
[GUIDE] Rooting and Unbricking p930/p935/p936 to root I use to run cm 10.1 but it was very buggy I use http://forum.xda-developers.com/showthread.php?t=1980541
[ROM][P930] Liquid Nitro V6 [02-21-2013] hope this help u
Sent from my LG-P930 using xda premium
Thanks for the response. Did you get the root in one try using the TPSparky method?, becuase I'm on my 4th try now. My phone reboots two times, but the command window always says = 0 (root), And it needs to be id = 0 /root. But I'll keep trying..
The first link is what I use to unbreak and root
Sent from my LG-P930 using xda premium
FINALLY, I'm rooted. I had to change some things around in the Path Variable string, then i tried Superoneclick first try rooted. Now Installing CMW and flashing roms, I assume i just download Rom Manager from the play store and flash cmw like that right?
So.. Is my phone bricked completely? I tried using cmd to flash 2.3.5 ATT stock.. when i typed in the first code (dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8) to put boot.img from sdcard to phone, it said that there was no space. However the other codes worked just fine. Then when i turned off the phone to try and put it in recovery mode as the guide instructed my phone screen remains off. Is my phone dead?
Ouch not a good sign. You will know by this hold down volume up and plug into the computer if it goes into download mode you are good but if the screen stays off and the computer gives you an error it is dead and will need to be sent off for repair. Good luck.
Sent from my LG-P930 using xda app-developers app
Swetnes said:
Ouch not a good sign. You will know by this hold down volume up and plug into the computer if it goes into download mode you are good but if the screen stays off and the computer gives you an error it is dead and will need to be sent off for repair. Good luck.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
Yea its dead, no response from my phone. Only flashing notification lights. Lol, i only had this phone for about a week. Thanks for the response.
I installed the official USb drivers from Samsung's website. when I boot into recovery or try to have a ADB interface this is the error I am getting:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Use the drivers from my signature.
Will do thanks
Sent from my SGH-T999 using xda app-developers app
re: usb drivers
nafeasonto said:
Will do thanks
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Whenever you install new samsung usb drivers in windows
it's always best to uninstall all other samsung usb drivers first
then restart windows.
Misterjunky said:
Whenever you install new samsung usb drivers in windows
it's always best to uninstall all other samsung usb drivers first
then restart windows.
Click to expand...
Click to collapse
Damn it man you beat me to it! lol
was gonna mention opening up USBDeview and uninstalling any Android interface devices and Samsung USB drivers.
Sent from my Nexus 4 using xda premium
I installed your signature drivers, and uninstalled any older drivers. Restarted, re-installed again still getting the error.
nafeasonto said:
I installed your signature drivers, and uninstalled any older drivers. Restarted, re-installed again still getting the error.
Click to expand...
Click to collapse
Hmm.. strange.. Try Aerowinder's signature and run through all the steps again but on a different pc. If the drivers install properly and device is recognized then you'll know what your real problem is.
Be sure to try different usb ports if needed to recognize the phone.
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
Hmm.. strange.. Try Aerowinder's signature and run through all the steps again but on a different pc. If the drivers install properly and device is recognized then you'll know what your real problem is.
Be sure to try different usb ports if needed to recognize the phone.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
All the aspects of the drivers work, except the ADb interface. I can flash from ODIN fine.
nafeasonto said:
All the aspects of the drivers work, except the ADb interface. I can flash from ODIN fine.
Click to expand...
Click to collapse
If that's the case then you can also try reinstalling the SDK tools
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
If that's the case then you can also try reinstalling the SDK tools
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I got it finally.
There were old HTC drivers installed as well that I didn't notice (woops) for my old MyTouch4G. I uninstalled the, the Samsung, and reinstalled and everything is good now.
Thanks for the help guy!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Help please, i already have my Galaxy s3 but i also want my ace 2 back. some guy from a mall who can fix my device reset my ace 2 because when i try to flash official stock jb rom, it only stuck at the bootloader., then he try to reset it with recovery then nothing happens it only boot again and again, but after that it doesnt boot to recovery anymore but it does boot to odin mode but when i try to press V Up to continue and v down nothing happens it just stuck at the warning message just like in the picture
Sent from my GT-I9300 using Tapatalk
alvinsc12 said:
Help please, i already have my Galaxy s3 but i also want my ace 2 back. some guy from a mall who can fix my device reset my ace 2 because when i try to flash official stock jb rom, it only stuck at the bootloader., then he try to reset it with recovery then nothing happens it only boot again and again, but after that it doesnt boot to recovery anymore but it does boot to odin mode but when i try to press V Up to continue and v down nothing happens it just stuck at the warning message just like in the picture
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
1. open back cover
2. pull battery
3.insert battery
4. go to download mode and try press vol up
5(if you manage to do 4). connect phone to pc and open odin
6. follow return to gb guide
teddytsen said:
1. open back cover
2. pull battery
3.insert battery
4. go to download mode and try press vol up
5(if you manage to do 4). connect phone to pc and open odin
6. follow return to gb guide
Click to expand...
Click to collapse
Hey mr., that doesnt work also, when i try to press volume up nothing happens it just stuck. Like the picture in the 1st post but thanks for trying. Just give me another way
Sent from my GT-I9300 using Tapatalk
Sorry, i never encountered it. Try googling
Sent from my GT-I8160 using Tapatalk
I tried googling it but i didnt find the answer. Does usb jig works with this phone??
Sent from my GT-I9300 using Tapatalk
alvinsc12 said:
I tried googling it but i didnt find the answer. Does usb jig works with this phone??
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
should. i think kyrillos used before, im not certain
But it should work right? I will just try it.. I think it will force my Ace 2 to go to download mode.
Sent from my GT-I9300 using Tapatalk
Maybe your vol up button is broken ?
Sent from my GT-I8160 using Tapatalk
I tried USB JIG and it forced my Device to go to Download Mode butwhen i try to connect it to my computer and launch odin there is nothing happens. It doesn't connect\ recognize my device. What should i do? I dont even hear a sound that my device is connected.. PLEASE HELP
alvinsc12 said:
I tried USB JIG and it forced my Device to go to Download Mode butwhen i try to connect it to my computer and launch odin there is nothing happens. It doesn't connect\ recognize my device. What should i do? I dont even hear a sound that my device is connected.. PLEASE HELP
Click to expand...
Click to collapse
Try porobu's suggestion for me, its in Q n A thread
Sent from my GT-I8160 using Tapatalk
Can you give me the link please. Im having a hard time finding it.
Sent from my GT-I9300 using Tapatalk
http://forum.xda-developers.com/showthread.php?p=49694405
Sent from my GT-I8160 using Tapatalk
I was trying to enable ART on my G3 with Xposed installed and followed some advice that said to replace app_process file in the system folder. Somehow I think the file was deleted altogether. Restarted and now my phone wont boot at all. Tried doing a factory reset and still not booting. I'm stuck at the LG splash screen and the LED is blinking. Any suggestions on how to fix this?
hanzoh said:
I was trying to enable ART on my G3 with Xposed installed and followed some advice that said to replace app_process file in the system folder. Somehow I think the file was deleted altogether. Restarted and now my phone wont boot at all. Tried doing a factory reset and still not booting. I'm stuck at the LG splash screen and the LED is blinking. Any suggestions on how to fix this?
Click to expand...
Click to collapse
Yeah sounds like you'll have to flash back to stock factory. Follow the instructions on this link. I had to when I deleted some lg apps trying to debloat and everything started crashing lol. Also last I heard xposed didn't work with art, this is directly from the developer of art. But it could of changed not sure.
http://forum.xda-developers.com/showthread.php?t=2799647
Sent from my LG-D850 using XDA Premium 4 mobile app
drock212 said:
Yeah sounds like you'll have to flash back to stock factory. Follow the instructions on this link. I had to when I deleted some lg apps trying to debloat and everything started crashing lol. Also last I heard xposed didn't work with art, this is directly from the developer of art. But it could of changed not sure.
http://forum.xda-developers.com/showthread.php?t=2799647
Sent from my LG-D850 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have followed all steps up to the point of pushing the yellow arrow. I keep getting this error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hanzoh said:
I have followed all steps up to the point of pushing the yellow arrow. I keep getting this error
Click to expand...
Click to collapse
Open up device manager (right click my computer then manager then device manager) find your phone and change it to com port 41
Oh in the instructions it says hold down power once it's all done to reboot phone this doesn't work you need to battery pull then insert battery and hold volume up button to re-enter download mode
Sent from my LG-D850 using XDA Premium 4 mobile app
Port has bee changed and have tried starting phone over multiple times.
Where it says port1 com41 did it change to yellow? Also did all the drivers install?
Sent from my LG-D850 using XDA Premium 4 mobile app
Must be the drivers then.. LGE Android mtp device says device cannot start. Deleted and reinstalled driver twice and same issue
Sent from my HTC One using XDA Free mobile app
No mtp will fail because you're in download mode. Download the driver's from lg site and manually install. Also make sure you're running the program before you plug the phone in
Sent from my LG-D850 using XDA Premium 4 mobile app
Tried and same thing. I'm running out of ideas
Sent from my HTC One using XDA Free mobile app
hanzoh said:
Tried and same thing. I'm running out of ideas
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
Dumb question lol. You're in download mode right? You powered off then held volume up then plugged phone in?
And you put the dll file in the previous screen? Idk what else could be the issue if none of this is working. I'd try another USB port on the computer. If that's a no go try to get help from the original thread that has the files and stuff maybe the op there can offer assistance
Sent from my LG-D850 using XDA Premium 4 mobile app
Thanks for trying to help. After many hours of trying everything I just took it back to an AT&T store today and got it replaced.
You have to use the TOT restore the same way as the G2 had to. There is a guide in android development I believe.
Sent from my LG-D850 using Tapatalk