Develop Bugs

[Q] Epic won't root or show in 'My Computer'

Hi.
Have Boostmobile Epic that came unrooted.
Downloaded drivers and phone shows in device manager under com ports.
Tried 11 USB cables then saw a video from qbking and bought a blackberry to use its cable making it 12 cables, none work.
Tried 2 computers with Vista and Win 7 x64.
Epic won't communicate with either comp with debugging on or off.
As i said in topic, one click root won't work. Says Phone is not connected.
I also cannot sideload content onto SD card because it does not show in My Computer.
It has been flashed to boost so i assume it has communicated with a PC in the past.
What can i do to fix this?

Reboot pc and phone then try again. If that doesn't work then uninstall drivers from pc then install again. Reboot pc after install after reboot plug in epic then wait for it to finish installing drivers then reboot both again then use odin.

You can also connect the phone with usb debugging on, then go into device manager on the computer and look for "other" or samsung android in USB section. Click on that and select update drivers and let windows update search and install drivers...it takes awhile.

just did the uninstall drivers then reboot both thing.
Driver installation shows device ready to use as...
SAMSUNG USB Composite Device
SAMSUNG Mobile Modem #2
SAMSUNG Mobile Modem Diagnostic Serial Port (WDM) (COM5)
All ready to use.
But Still not showing in my computer for file transfer or working in usb debugging mode for root.

PHug said:
just did the uninstall drivers then reboot both thing.
Driver installation shows device ready to use as...
SAMSUNG USB Composite Device
SAMSUNG Mobile Modem #2
SAMSUNG Mobile Modem Diagnostic Serial Port (WDM) (COM5)
All ready to use.
But Still not showing in my computer for file transfer or working in usb debugging mode for root.
Click to expand...
Click to collapse
Try the update driver choice in device manager. The CDC driver is missing. I think it loads 5 drivers if I remember correctly with USB on...yeah the mass storage driver is missing too. Let Windows update find them all.

kennyglass123 said:
Try the update driver choice in device manager. The CDC driver is missing. I think it loads 5 drivers if I remember correctly with USB on...yeah the mass storage driver is missing too. Let Windows update find them all.
Click to expand...
Click to collapse
Hi, thanks for help.
Just tried uninstalling everything and letting windows find drivers. Windows found a different driver package from S3 studio or something but I still get no mass storage or root.
I've read you can root and install roms without a computer Guess that will have to be my route.
As far as mass storage goes... It's annoying but I pulled the back off and put SD card directly into computer

You are sliding down the pulldown on your epic screen and pushing mount sd card for mass storage right?

jbadboy2007 said:
You are sliding down the pulldown on your epic screen and pushing mount sd card for mass storage right?
Click to expand...
Click to collapse
Yeah, the robot pic turns from green to orange but it never actually connects to either computer.
Going to my brothers house soon to check his 2 computers, he says his Thunderbolt will only work on one.

PHug said:
Yeah, the robot pic turns from green to orange but it never actually connects to either computer.
Going to my brothers house soon to check his 2 computers, he says his Thunderbolt will only work on one.
Click to expand...
Click to collapse
Some computers are finicky and will only work on the USB port used to install the drivers. Odin only works on the left side of my laptop and mass storage works on the right...go figure!
The fact that the phone thinks it connects and the computer probably makes the connection noise shows there is still a driver problem. Did you reboot the computer and phone after the full driver installation?

Yes I restarted both several times while installing/uninstalling
Drivers... I have just accepted that I need to remove the card to sideload content.
On a side note, I am now afraid to root my phone and change the roms because I'm on boostmobile and will be unable to connect phone to a computer to fix if something goes wrong.
Sent from my SPH-D700 using Tapatalk

after you install drivers, reboot, then plug in your phone w debugging on, it should install a bunch of drivers, then take forever on modem, unplug and replug the usb from the phone really fast, this should trip it up into moving to the next device... there should be at least two or three more. If you have GB loaded for some reason the RNDIS drivers are wonky. Make sure you use a USB port on your motherboard, not on a PCI, not on a front port... the drivers are acting weird lately, like they changed em up a bit... idunno... but once you get a setup, dont mess with it! Hope somethin helps... Its almost guaranteed the drivers, unless the Boost is the issue, idunno...

ive had that same problem ever sense ive got the phone, what if you havent given up there is another way for you to connect to your computer. It is very simple and fast it is how i connect now and it works every time.
1. Have computer on and Phone off
2. Boot your phone into ClockworkMod 3.1.0.1 (Power/camera/volume down)(it must be this version of clockwork)
3. Go to mounts and storage
4. On the bottom of the menu you must click mount usb storage.
5. Plug your phone into the computer and your computer should recognize your phone now.

Also if your on Vista / Win7 you should run the command line (cmd) or the bat file to root with admin rights: Right click cmd or the run.bat and select run as administrator and that hould help.
Sent from an Epic with 4G

I don't think the drivers for samsung are 64 bit compatable. If you got the drivers from samsung it should state that.
Sent from my lean mean drunken machine useing XDA Premium and a 12 pack of Sam Lager

tazfanatic said:
I don't think the drivers for samsung are 64 bit compatable. If you got the drivers from samsung it should state that.
Sent from my lean mean drunken machine useing XDA Premium and a 12 pack of Sam Lager
Click to expand...
Click to collapse
The ones installed through Windows Update run fine on my 64 bit Windows 7 Laptop.

kennyglass123 said:
The ones installed through Windows Update run fine on my 64 bit Windows 7 Laptop.
Click to expand...
Click to collapse
good to know.

flashed ICS rom now phone cant be recognized by computer

ok basically phone wont go into mass storage mode when connected to computer and it isnt recognized by odin or the the computer at all and let me get all these out of the way before im asked
ok first yes driver are installed properly i even installed kies twice and just the drivers from the samsung website to make sure i wasnt messing up somewhere
and then...
i also tried doing a nandroid of blazer rom and getting back to the gingerbread just so my phone would be recognized that also did not work
and then..
i just now bought the mobile odin app and tried flashing the stock eko2 kernel this did not work either
and then...
ive used the original USB cord and the one i bought to day as well as several different computers just to see if the pop up as recognized with show but nothing happens my phone seems like its no longer capable of going into mass storage mode
and then...
moved this here hoping someone has has this issue hopefully you guys can help ill be up all night so feel free to resond whenever thanks guys

make sure your phone is disconnected from the computer and then try going into the settings and in the top section that is wireless and networks press more, then USB utilities, and press connect storage to PC and then plug your phone into the computer. had about the same problem and came across that.

You can also try going into your device settings on your pc (samsung/modem) and resetting the driver it seems to get "stuck" sometimes.

RigorousNinja said:
make sure your phone is disconnected from the computer and then try going into the settings and in the top section that is wireless and networks press more, then USB utilities, and press connect storage to PC and then plug your phone into the computer. had about the same problem and came across that.
Click to expand...
Click to collapse
yea this same method works for me too when the pc doesnt recognize it

I tried the USB utilities but it only popped up with MTP initialization and then MTP connected but when I click connect it tells me remove USB chord
Sent from my SPH-D710 using XDA App

ross4747 said:
I tried the USB utilities but it only popped up with MTP initialization and then MTP connected but when I click connect it tells me remove USB chord
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
mine told me to remove it too. so i had to click connect *before* plugging in the usb cable

ejbmvp said:
mine told me to remove it too. so i had to click connect *before* plugging in the usb cable
Click to expand...
Click to collapse
yea thats what i did and thats when i got the MTP initialization and connected messages but no response from my PC

RigorousNinja said:
make sure your phone is disconnected from the computer and then try going into the settings and in the top section that is wireless and networks press more, then USB utilities, and press connect storage to PC and then plug your phone into the computer. had about the same problem and came across that.
Click to expand...
Click to collapse
+1 to this... its the new way to connect

I put this on my sd card (by taking the card out of the phone) and putting it in a card reader. I flashed the file from the stock recovery and this gave me custom recovery. Then I restored my previous backup. I was having the same issue and FB21 has too many bugs. I went back to gingerbread but kept fb21 modem.

You can actually get MTP working quite simply...
ssconceptz said:
To use USB MTP you have to unmount SD Card first then plug in.
Click to expand...
Click to collapse
Credit goes to ssconceptz for the workaround

neatchee said:
You can actually get MTP working quite simply...
Did this and that got my computer to acknowledge I had connected my phone but not it says unrecognized, so I'm going to uninstall kies and then reinstall again and see if that helps
Credit goes to ssconceptz for the workaround
Click to expand...
Click to collapse
Sent from my SPH-D710 using XDA App

OK that also didn't work I have mobile Odin on my.phone is it possible to use it to go back to stock?
Sent from my SPH-D710 using XDA App

OK I've gotten my PC to know when my phone is connected but no matter how many times install the drivers or uninstall and install kies or use the MTP method you guys talked about it still comes up unrecognized device I tried going into device manager and updating them myself unfortunately that didn't help it kept giving me the code. 10 device is unable to start any ideas?
Sent from my SPH-D710 using XDA App

Fastboot & ADB mode not working but charging is?

I don't know what caused this but my PC isn't detecting my phone being plugged in at all. It IS charging though, but no storage is mounted, windows isn't trying to install any drivers, ADB not detected, fastboot not detected, even when boot into download mode, Odin is not detecting the phone. Any idea? Could it be that the USB port just crapped out just like that?
I'm on AOKP JB euroskank build + Trinity kernel when that happened. Also I tried to apply V6 supercharger.
Any idea?

j3nnning said:
I don't know what caused this but my PC isn't detecting my phone being plugged in at all. It IS charging though, but no storage is mounted, windows isn't trying to install any drivers, ADB not detected, fastboot not detected, even when boot into download mode, Odin is not detecting the phone. Any idea? Could it be that the USB port just crapped out just like that?
I'm on AOKP JB euroskank build + Trinity kernel when that happened. Also I tried to apply V6 supercharger.
Any idea?
Click to expand...
Click to collapse
turn off fastcharge.

Zepius said:
turn off fastcharge.
Click to expand...
Click to collapse
I really wish it was this simple. I suspected its a bug related to fastcharge too. I have flashed to AOKP ICS B40 (I can't toggle it in JB P3 build & the euroskank build, the toggle doesn't work at all), to try to toggle fastcharge, but it isn't working either (I can toggle it on off, but it isn't working). I have wiped multiple times between flashing each rom too.
Is there a way to explicitly disable fastcharge?

Make sure that USB Debugging is enabled and correct drivers are installed.
Also, you may want to try connecting the device on a different computer.
Sent from my Galaxy Nexus using Tapatalk 2

infazzdar said:
Make sure that USB Debugging is enabled and correct drivers are installed.
Also, you may want to try connecting the device on a different computer.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
USB Debugging is enabled, I even turn it off and turn it on back to make sure. I even checked my MTP settings. The drivers are installed too, because before this they were all working fine. The drivers shouldn't be the problem. If the drivers aren't installed the PC should prompt me to install it, but it isn't doing that.
The only thing I have not try is connecting it to a different computer.

Nevermind, turns out the culprit is my PC. Its messed up for some reason. Everything works alright after a restart.

Windows won't recognize t989

Hello all!
First: I promise I searched the forums and google as hard as I could!
I'm running AOKP JB with CWM, although the problem was present on stock ICS from T-Mobile.
Symptoms: Computer and phone will refuse to acknowledge any connection (nothing shows up in Device Manager), except the phone will still charge. If I do the "remove the battery with USB plugged in" trick, the first time I do it, it will recognize an unknown device, but kies and adb won't recognize it. If I unplug it and plug it back in, it'll go back to not acknowledging any connection.
I previously programmed it (when I was still running stock ROM) via ADB via WiFi, but I need to be able to use ADB via USB. Besides, I can't seem to get ADB over WiFi anymore.
When I plug it into a different computer (Win7), it will, however, recognize my phone.
Earlier this year, before I ever tried programming via WiFi, it connected to my Win8 machine with no problem. I don't think it's a problem with the wifi setup though because the ROM was reinstalled and of course I've restarted ADB in USB mode in the months since...
What I've tried:
Reinstalling Kies
Reinstalling Samsung USB drivers
[^]Restarting the ADB server
Updating ADB
Trying different USB cables
Trying different USB ports
Toggling USB debugging
Toggling MTP mode
The UART thing from the dialer
Restarting the phone and the computer (of course)
Checking to see if my computer's USB drivers need to be updated
The android terminal command "setprop persist.sys.usb.config mass_storage,adb"
Pulling and replacing the battery while connected via USB
Crying in a corner
If anyone can help me, it'd be greatly appreciated! I'm all out of ideas and Google is no longer helpful =/

try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??

krazierokz said:
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
Click to expand...
Click to collapse
I tried on my work computer that didn't have any samsung drivers and when the "unknown device" dialog popped up it didn't do anything or install anything, nor did it show up in Device Manager. Unplugging and replugging it back in did not reproduce the dialog box. Togged USB Debugging and still no dialog box saying it recognized it.
The thing with the samsung drivers is that they're self installing so even if it popped up in Device Manager, I wouldn't be able to manually update the drivers =/
I tried MTP both with and without USB Debugging, although it also gives the option for PTP.
At this point do you think I should unroot and go back to stock? It's not been recognized on three computers now! =[

Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2

foltz61 said:
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Both the stock cable and a generic cable.

Similar problem
Similar problem as the OP. And hi guys, it's nice to be on these forums.
My device, when I plug it in using the stock cable, doesn't even charge. It doesn't show up in device manager, nor does it give me a notification, or say it's unsupported and bear that yellow icon. I have tried using different USB ports, I have tried the toggling USB debugging, I have tried restarting phone, computer, and taking out battery. I have tried that PDA/MODEM dialer trick. I am using 4.1.2 Jellybean, not rooted. (that WAS my goal,, until I hit this roadblock) I have not connected it to the computer in the past, it's relatively new. I'm thinking the cable is bust.
Any suggestions would be appreciated. It charges fine through a wall outlet plug, be it generic or stock.

so guys ive come to a conclusion i think its something in the samsung usb cables try getting yourself a blackberry usb cable , TRUST ME !!! ever since i got my phoness etc... tablet and yadi yadi samsung usb cables have always seemed to give me problems i think its because they are multi data/charging cables and when using the blackberry usb cable i have never ever once encountered a problem with any of my phones sd/storage problems do yourself a favor and pick up one of those cables and you will be golden !! if not then i guess im the only lucky one :LOL here you go http://www.amazon.com/Blackberry-Travel-Adapter-Micro-Cable/dp/B004VMVSYK/ref=pd_sim_cps_2 5 bucks!
Edit also one more test boot into recovery and click in the advanced menu and see if mount usb works for you in recovery mode ??

FIX (try using a generic cable)
I actually solved it on my own! After borrowing a generic cable from a friend it booted up! The Samsung cable was just not doing its thing.

yeah im telling you those cables they provide are JUNK!!! i only use my samsung to charge because they do that well but data they are str8 CRAP!! glad you got it up and going

OP
Hope OP will have the same luck as me...pray to the Android gods...

Lol:thumbup:
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

My Nexus 2013 32GB 3G is not detected properly on PC, help!

Hello gentlemen,
i got the tablet for three days and all was fine.
Yesterday i installed unofficial CM 10.2 build and since then when i connect tablet to PC,
my tablet is detected as Nexus 7 with exclamation or as deb also with exclamation,
I tried to install nexus 7 usb driver, but it didnt find any device to which it could install the driver.
USB Debugging is enabled, if i disable it, nothing is detected.
What are my options now? can it be solved?
Everything else is fine.

spajdr said:
Hello gentlemen,
i got the tablet for three days and all was fine.
Yesterday i installed unofficial CM 10.2 build and since then when i connect tablet to PC,
my tablet is detected as Nexus 7 with exclamation or as deb also with exclamation,
I tried to install nexus 7 usb driver, but it didnt find any device to which it could install the driver.
USB Debugging is enabled, if i disable it, nothing is detected.
What are my options now? can it be solved?
Everything else is fine.
Click to expand...
Click to collapse
Can you view it from the pc, see the files on it and whatnot?

RiffyDivine said:
Can you view it from the pc, see the files on it and whatnot?
Click to expand...
Click to collapse
Only via enabling MTP or PTP, i'm screwed?

spajdr said:
Hello gentlemen,
i got the tablet for three days and all was fine.
Yesterday i installed unofficial CM 10.2 build and since then when i connect tablet to PC,
my tablet is detected as Nexus 7 with exclamation or as deb also with exclamation,
I tried to install nexus 7 usb driver, but it didnt find any device to which it could install the driver.
USB Debugging is enabled, if i disable it, nothing is detected.
What are my options now? can it be solved?
Everything else is fine.
Click to expand...
Click to collapse
spajdr said:
Only via enabling MTP or PTP, i'm screwed?
Click to expand...
Click to collapse
No you aren't screwed, you really got to want it to break it. Just so I am clear then it won't show up as an external hard drive or anything unless you do a peer to peer setup? Also are you running the newest nightly of CM?
"I had to turn off USB debugging, delete the ADB drivers in Device Manager, then reboot the device while it’s still plugged in. Windows recognized the device as an MTP device & installed the drivers before it even fully booted."
Found this well reading on it not connecting to the pc. Simple enough to try out.

Yes sir, I can only see it as PTP or MTP, nothing else.

Should MTP be enabled when rebooting the device?
What i should achieve by doing this?
EDIT.: after restart of device it's trying to install AOSP on deb, unsuccessfully.

spajdr said:
Should MTP be enabled when rebooting the device?
What i should achieve by doing this?
EDIT.: after restart of device it's trying to install AOSP on deb, unsuccessfully.
Click to expand...
Click to collapse
i thought that MTP is the only option to connect it to the pc because its sdcard is emulated on the same partition? my galaxy nexus and nexus 7 can only do MTP too, unless in recovery where i mount it somewhere along the lines of mount as usb storage?

NigPod said:
i thought that MTP is the only option to connect it to the pc because its sdcard is emulated on the same partition? my galaxy nexus and nexus 7 can only do MTP too, unless in recovery where i mount it somewhere along the lines of mount as usb storage?
Click to expand...
Click to collapse
You could be right, i don't know, i copied custom rom immediately after i got nexus, so i didn't really watched how PC see the tablet.
Anyway i successfully flashed back original firmware 4.3.1 and after reboot suddenly Nexus 7 is recognized correctly
and it automatically install driver from folder where i got usb driver from google. So .. i will take a few days pause before i flash custom rom again
Thank you all for helping me in this.
Cheers
spajdr