flashed ICS rom now phone cant be recognized by computer - Samsung Epic 4G Touch

ok basically phone wont go into mass storage mode when connected to computer and it isnt recognized by odin or the the computer at all and let me get all these out of the way before im asked
ok first yes driver are installed properly i even installed kies twice and just the drivers from the samsung website to make sure i wasnt messing up somewhere
and then...
i also tried doing a nandroid of blazer rom and getting back to the gingerbread just so my phone would be recognized that also did not work
and then..
i just now bought the mobile odin app and tried flashing the stock eko2 kernel this did not work either
and then...
ive used the original USB cord and the one i bought to day as well as several different computers just to see if the pop up as recognized with show but nothing happens my phone seems like its no longer capable of going into mass storage mode
and then...
moved this here hoping someone has has this issue hopefully you guys can help ill be up all night so feel free to resond whenever thanks guys

make sure your phone is disconnected from the computer and then try going into the settings and in the top section that is wireless and networks press more, then USB utilities, and press connect storage to PC and then plug your phone into the computer. had about the same problem and came across that.

You can also try going into your device settings on your pc (samsung/modem) and resetting the driver it seems to get "stuck" sometimes.

RigorousNinja said:
make sure your phone is disconnected from the computer and then try going into the settings and in the top section that is wireless and networks press more, then USB utilities, and press connect storage to PC and then plug your phone into the computer. had about the same problem and came across that.
Click to expand...
Click to collapse
yea this same method works for me too when the pc doesnt recognize it

I tried the USB utilities but it only popped up with MTP initialization and then MTP connected but when I click connect it tells me remove USB chord
Sent from my SPH-D710 using XDA App

ross4747 said:
I tried the USB utilities but it only popped up with MTP initialization and then MTP connected but when I click connect it tells me remove USB chord
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
mine told me to remove it too. so i had to click connect *before* plugging in the usb cable

ejbmvp said:
mine told me to remove it too. so i had to click connect *before* plugging in the usb cable
Click to expand...
Click to collapse
yea thats what i did and thats when i got the MTP initialization and connected messages but no response from my PC

RigorousNinja said:
make sure your phone is disconnected from the computer and then try going into the settings and in the top section that is wireless and networks press more, then USB utilities, and press connect storage to PC and then plug your phone into the computer. had about the same problem and came across that.
Click to expand...
Click to collapse
+1 to this... its the new way to connect

I put this on my sd card (by taking the card out of the phone) and putting it in a card reader. I flashed the file from the stock recovery and this gave me custom recovery. Then I restored my previous backup. I was having the same issue and FB21 has too many bugs. I went back to gingerbread but kept fb21 modem.

You can actually get MTP working quite simply...
ssconceptz said:
To use USB MTP you have to unmount SD Card first then plug in.
Click to expand...
Click to collapse
Credit goes to ssconceptz for the workaround

neatchee said:
You can actually get MTP working quite simply...
Did this and that got my computer to acknowledge I had connected my phone but not it says unrecognized, so I'm going to uninstall kies and then reinstall again and see if that helps
Credit goes to ssconceptz for the workaround
Click to expand...
Click to collapse
Sent from my SPH-D710 using XDA App

OK that also didn't work I have mobile Odin on my.phone is it possible to use it to go back to stock?
Sent from my SPH-D710 using XDA App

OK I've gotten my PC to know when my phone is connected but no matter how many times install the drivers or uninstall and install kies or use the MTP method you guys talked about it still comes up unrecognized device I tried going into device manager and updating them myself unfortunately that didn't help it kept giving me the code. 10 device is unable to start any ideas?
Sent from my SPH-D710 using XDA App

Related

phone not showing on computer

problem need a little help. as i plug phone into computer i get nothing but charge.Look in my computer and shows up but when click on it it says insert card.can put in recovery and usb that way.....also can adb and phone shows up in command..any help why it doesnt give me the option when i plug it into usb port would be great...
If phone is not shown I believe you are missing drivers. Check your device manager and follow this steps http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
Now if you want to access SD card but phone only charge maybe you or someone else clicked "remember this" while selected option "charge only" in past and phone does NOT prompt anymore. What are you trying to do ?
iamcajun said:
problem need a little help. as i plug phone into computer i get nothing but charge.Look in my computer and shows up but when click on it it says insert card.can put in recovery and usb that way.....also can adb and phone shows up in command..any help why it doesnt give me the option when i plug it into usb port would be great...
Click to expand...
Click to collapse
Let me guess.. are you using the cm7 wimax rom....if you are that is a known issue.
Sent from my WiMax infested cm7 Super...Mario...Saiyen...Street Fighter...oh yeah SuperSonic.gginggerbread!!!
No im running myns rls5...Im just trying to get it to connect to computer so it is easier to transfer files from computer to phone
Also don't accidently use autostarts to disable pc synchronize like I did lol.
Sent from my PC36100 using XDA App
iamcajun said:
No im running myns rls5...Im just trying to get it to connect to computer so it is easier to transfer files from computer to phone
Click to expand...
Click to collapse
I love Samba Sharing, works with out drivers and no usb cable required (works over local network - WiFi). If no luck with usb try that. Get it at https://market.android.com/details?id=com.funkyfresh.samba
jacoballen u the man i did do that. went back and turned it on and now working .....thanks alot
Haha that's what happens when you try saving battery power and start turning everything off lol. I so did that and I laugh at myself now.
Sent from my PC36100 using XDA App

Problem connecting E4GT to computer

After I successfully flashed my phone to boost, I tried to plug in my my phone into my computer and I couldn't get it to go into USB mass storage mode. I have USB debugging mode unchecked and when i plug it in, it says "MTP-Connected". What do i do?
Dwayneiztheshyt said:
After I successfully flashed my phone to boost, I tried to plug in my my phone into my computer and I couldn't get it to go into USB mass storage mode. I have USB debugging mode unchecked and when i plug it in, it says "MTP-Connected". What do i do?
Click to expand...
Click to collapse
I replied to your post in the flashing post, try to disk ##8778# and put your phone in"AP" that should work.. remember you put it in "cp" when choosing do you have to put it back to the way it was so your phone can be recognized by your computer man. Try that and let me know if it works.
I can'tget mine to get recognized by my pc
Sent from my SPH-D710 using xda app-developers app
I had similar problems with my wife's phone. The answer was sending it back to Samsung - there seems to be some type of manufacturing problem with the USB port itself. One way to check for this is to try turning on USB Debugging Mode. On my wife's phone, prior to the fix, it would not let me set that claiming that the phone was connected - when it wasn't! After the fix, the USB is far more reliable than ever.

[Q] Connecting EVo 4g to the computer

Im trying to root my Evo 4g but it wont connect to the computer. When i plug it in it starts charging but i cant find it on 'my computer'. I made sure it was set to disc drive. i have tried different cords and ever different phones with the same cord. the other phone will connect just fine.. i have tried downloading several different drivers but none work. i tried doing a factory reset thinking it was a software problem on the phone. my last theory is that the port on the phone is bad. but the phone still charges so im not 100% sure about that. any ideas on what else i can do to fix this problem?
Go into Menu - Settings - Applications - Development. Make sure USB debugging is checked.
prboy1969 said:
Go into Menu - Settings - Applications - Development. Make sure USB debugging is checked.
Click to expand...
Click to collapse
Also, install HTC Sync, it's on your SD Card by default, and then uninstall it, so the drivers for the Evo are on your computer
Has your phone been rooted and flashed to another rom?
Sometimes the usb port for your phone is broken. Mine is so I have to put the sd card directly into the computer using a adapter
Sent from my PC36100 using xda app-developers app
Have you made sure your phone is not waiting for a verification that you want to turn USB storage on? I turn it on and then forget to hit "OK" on the popup verification at least once a day.

My phone just won't connect to my PC

I'm running 4.1.1 and every time I plug my device in (With stock USB) I get "USB device not recognized"
I've tried another USB. I've downloaded Kies (Will only connect wifi), I've tried reinstalling drivers, I've tried using another computer as well. I've also enabled/disabled USB debugging,
The USB connection notification only appears sometimes, and even when it does my computer still won't recognize my S3. After I reinstall the drivers my phone does say "Connected as a Media device", but then the notification goes away..
FYI, I'm trying to root, that's why I need a direct connection with my computer so badly.
Does your computer has samsung kies?
You say drivers. Idk what u mean but all we need is samsung kies.
Rovon said:
I'm running 4.1.1 and every time I plug my device in (With stock USB) I get "USB device not recognized"
I've tried another USB. I've downloaded Kies (Will only connect wifi), I've tried reinstalling drivers, I've tried using another computer as well. I've also enabled/disabled USB debugging,
The USB connection notification only appears sometimes, and even when it does my computer still won't recognize my S3. After I reinstall the drivers my phone does say "Connected as a Media device", but then the notification goes away..
FYI, I'm trying to root, that's why I need a direct connection with my computer so badly.
Click to expand...
Click to collapse
This is a link I posted, if you searched you would have found.....
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335
bikrame said:
Does your computer has samsung kies?
You say drivers. Idk what u mean but all we need is samsung kies.
Click to expand...
Click to collapse
Did you even read my original post...?
bobolinko said:
This is a link I posted, if you searched you would have found.....
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335
Click to expand...
Click to collapse
I tried your method a few days ago, and it didn't work. I tried your method again.. it doesn't work.
I had this issue. All I did was get some good ol canned air and blew the dust out of my micro usb port. After that it connects just fine. Was about to do a warranty exchange before I did this.
Sent from my SGH-T999 using xda app-developers app
Beefvvl said:
I had this issue. All I did was get some good ol canned air and blew the dust out of my micro usb port. After that it connects just fine. Was about to do a warranty exchange before I did this.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Tried that as well. Neither computer works. Blew into the phone as well ...
Its your rom on the phone that's causing this. If you want to rule it out, why don't you just do a nandroid backup and install stock rom or perhaps the same rom clean from start. I had this issue before and it was fixed with reflashing clean rom.
Sent from S♣ with XDA App
tester420 said:
Its your rom on the phone that's causing this. If you want to rule it out, why don't you just do a nandroid backup and install stock rom or perhaps the same rom clean from start. I had this issue before and it was fixed with reflashing clean rom.
Sent from S♣ with XDA App
Click to expand...
Click to collapse
Read his post, he is attempting to root. How does one backup their rom and restore with a stock recovery.
tester420 said:
Its your rom on the phone that's causing this. If you want to rule it out, why don't you just do a nandroid backup and install stock rom or perhaps the same rom clean from start. I had this issue before and it was fixed with reflashing clean rom.
Sent from S♣ with XDA App
Click to expand...
Click to collapse
I'm not rooted ...
I should probably mention the phone charges will of the USB cables but none of them work with the PC. I can't tell if it's a software issue or internal..
I think it's a computer issue, what was the other computer software you tried on?
mt3g said:
I think it's a computer issue, what was the other computer software you tried on?
Click to expand...
Click to collapse
Tried it with W7 & Mac, neither recognize the device. Android file transfer just tells me "no device found", and the Kies on mac doesn't work either.
I still won't update my computer from XP cause all I read are device errors with upgraded versions of windows... see if you can get your hands on XP and try. Just as insurance, you have gone through device manager and removed all drivers for the phone and then pushed the proper ones from Samsung, correct?
Rovon said:
I should probably mention the phone charges will of the USB cables but none of them work with the PC. I can't tell if it's a software issue or internal..
Click to expand...
Click to collapse
watch the screen closely when you connect the phone to the pc. does it even recognize thst some usb device was plugged in?
After a few moments, (with the phone still connected) click start,right click on my computer, select manage and select device manager.
are there any yellow question marks on the right side under the computer?
Open the modems (click the + sign) is there any SAMSUNG USB Modem? (should have no yellow question mark)
Open Universal Serial Bus controllers, do you see the samsung Mobile USB Composite Device?
There should be NO yellow question marks or exclamation marks anywhere on the right panel.
If there are, there is a problem with your computer settings/drivers or services.
If you followed my "cannot fail" steps EXACTLY in the order I had it, and did not skip anything, you should be without any problems with the modem connectivity. That includes the uninstallation of any samsung drivers previously installed.
If you do not even see the samsung modem, the cables or the phone may be your problem.
Post your results and I'll help you to get it working. Also mention what your compurter's OS is.
mt3g said:
Read his post, he is attempting to root. How does one backup their rom and restore with a stock recovery.
Click to expand...
Click to collapse
My bad, speed reading is not always good... thanks for pointing that out.
Anyway, did the OP ever get this resolved? Bobolinko's steps are thorough and if that didn't fix it, why don't you just try to go into download mode and ODIN a stock ROM with root injected into it already? It's another option...
Did you try buying a fresh new cable to connect the phone to the computer? I only have those issues with corrupted USB cable and a messy laptop...
Also when that notification appears for me I go to my phone USB section and tells it to mount as storage...and if its on storage I switch media than back to storage...always work for me.
Sent from my SGH-T999 using xda premium
bobolinko said:
watch the screen closely when you connect the phone to the pc. does it even recognize thst some usb device was plugged in?
After a few moments, (with the phone still connected) click start,right click on my computer, select manage and select device manager.
are there any yellow question marks on the right side under the computer?
Open the modems (click the + sign) is there any SAMSUNG USB Modem? (should have no yellow question mark)
Open Universal Serial Bus controllers, do you see the samsung Mobile USB Composite Device?
There should be NO yellow question marks or exclamation marks anywhere on the right panel.
If there are, there is a problem with your computer settings/drivers or services.
If you followed my "cannot fail" steps EXACTLY in the order I had it, and did not skip anything, you should be without any problems with the modem connectivity. That includes the uninstallation of any samsung drivers previously installed.
If you do not even see the samsung modem, the cables or the phone may be your problem.
Post your results and I'll help you to get it working. Also mention what your compurter's OS is.
Click to expand...
Click to collapse
As soon as I plug my S3 in, my computer recognizes a USB is active. In Device Manager, I do not have Samsung USB, all I have is "Unknown Device". I'm not sure what you mean by yellow exclamation point in the bottom right, but there's nothing in my notifications. However, I do get 2 yellow exclamations in device manager. One in Universal Series Bus, and one in other devices
Hi there.
Check this
On calls hit *#7284#
Check if pda is enabled then click on qualcomm settings and see if mtb+adb are enabled.
If not then just enable those.
Hope this is your problem.
Good luck.
Sent from my SGH-T999
Leoniums said:
Hi there.
Check this
On calls hit *#7284#
Check if pda is enabled then click on qualcomm settings and see if mtb+adb are enabled.
If not then just enable those.
Hope this is your problem.
Good luck.
Sent from my SGH-T999
Click to expand...
Click to collapse
I've tried this as well. I get this error:
"Connection problem or invalid MMI code"
The problem is with your computer, and not the phone. You CANNOT get it connected with a problem in the USB settings.
click on the yellow exclamation items and DELETE or UNINSTALL them. then reboot the machine and it should reinstall automatically. If your DRIVERS that are already in the machine are bad, you have to get them updated or replaced. uninstall KIES from the computer, reboot, and reinstall it. go to samsung's site and download and install the driver for your comuter.
The one for the xp is: SAMSUNG_USB_Driver_for_Mobile_Phones_1.4.8.0.exe
install it to your computer and be SURE there is no error while it installs.
then check again your device manager list for any yellow problem areas
connect the phone and wait a while, then, disconnect and wait about a minute
then again, connect the phone, and wait at least one minute. open the device manager page and see if there are any yellow area problems again.
are you positive you have the latest window updates?
you can sometimes right click on an item and do the driver update and fix a problem.
You clear all the COMPUTER END PROBLEMS you have and the phone will connect. That, my friend, you can take to the bank.
Good Luck!
Aloha,
post your results later

Windows won't recognize t989

Hello all!
First: I promise I searched the forums and google as hard as I could!
I'm running AOKP JB with CWM, although the problem was present on stock ICS from T-Mobile.
Symptoms: Computer and phone will refuse to acknowledge any connection (nothing shows up in Device Manager), except the phone will still charge. If I do the "remove the battery with USB plugged in" trick, the first time I do it, it will recognize an unknown device, but kies and adb won't recognize it. If I unplug it and plug it back in, it'll go back to not acknowledging any connection.
I previously programmed it (when I was still running stock ROM) via ADB via WiFi, but I need to be able to use ADB via USB. Besides, I can't seem to get ADB over WiFi anymore.
When I plug it into a different computer (Win7), it will, however, recognize my phone.
Earlier this year, before I ever tried programming via WiFi, it connected to my Win8 machine with no problem. I don't think it's a problem with the wifi setup though because the ROM was reinstalled and of course I've restarted ADB in USB mode in the months since...
What I've tried:
Reinstalling Kies
Reinstalling Samsung USB drivers
[^]Restarting the ADB server
Updating ADB
Trying different USB cables
Trying different USB ports
Toggling USB debugging
Toggling MTP mode
The UART thing from the dialer
Restarting the phone and the computer (of course)
Checking to see if my computer's USB drivers need to be updated
The android terminal command "setprop persist.sys.usb.config mass_storage,adb"
Pulling and replacing the battery while connected via USB
Crying in a corner
If anyone can help me, it'd be greatly appreciated! I'm all out of ideas and Google is no longer helpful =/
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
krazierokz said:
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
Click to expand...
Click to collapse
I tried on my work computer that didn't have any samsung drivers and when the "unknown device" dialog popped up it didn't do anything or install anything, nor did it show up in Device Manager. Unplugging and replugging it back in did not reproduce the dialog box. Togged USB Debugging and still no dialog box saying it recognized it.
The thing with the samsung drivers is that they're self installing so even if it popped up in Device Manager, I wouldn't be able to manually update the drivers =/
I tried MTP both with and without USB Debugging, although it also gives the option for PTP.
At this point do you think I should unroot and go back to stock? It's not been recognized on three computers now! =[
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
foltz61 said:
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Both the stock cable and a generic cable.
Similar problem
Similar problem as the OP. And hi guys, it's nice to be on these forums.
My device, when I plug it in using the stock cable, doesn't even charge. It doesn't show up in device manager, nor does it give me a notification, or say it's unsupported and bear that yellow icon. I have tried using different USB ports, I have tried the toggling USB debugging, I have tried restarting phone, computer, and taking out battery. I have tried that PDA/MODEM dialer trick. I am using 4.1.2 Jellybean, not rooted. (that WAS my goal,, until I hit this roadblock) I have not connected it to the computer in the past, it's relatively new. I'm thinking the cable is bust.
Any suggestions would be appreciated. It charges fine through a wall outlet plug, be it generic or stock.
so guys ive come to a conclusion i think its something in the samsung usb cables try getting yourself a blackberry usb cable , TRUST ME !!! ever since i got my phoness etc... tablet and yadi yadi samsung usb cables have always seemed to give me problems i think its because they are multi data/charging cables and when using the blackberry usb cable i have never ever once encountered a problem with any of my phones sd/storage problems do yourself a favor and pick up one of those cables and you will be golden !! if not then i guess im the only lucky one :LOL here you go http://www.amazon.com/Blackberry-Travel-Adapter-Micro-Cable/dp/B004VMVSYK/ref=pd_sim_cps_2 5 bucks!
Edit also one more test boot into recovery and click in the advanced menu and see if mount usb works for you in recovery mode ??
FIX (try using a generic cable)
I actually solved it on my own! After borrowing a generic cable from a friend it booted up! The Samsung cable was just not doing its thing.
yeah im telling you those cables they provide are JUNK!!! i only use my samsung to charge because they do that well but data they are str8 CRAP!! glad you got it up and going
OP
Hope OP will have the same luck as me...pray to the Android gods...
Lol:thumbup:
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Categories

Resources