ok so i have a GSmart 202+ phone and when i connect any earphones with a button the music is kinda off and i can barly hear the lyrics,
But if i press the button on the earphones it plays the music normally.
can't anyone help me?
i think there is a difference between a head/earphone that have a mic and doesnt have a mic. the cables are terminated differently at the connector end.
mute buttom
This sound like to mute buttom been sired wrong way round.
Unless the earphone is specified to be use for your dvice, sometime with a mute button or so call microphone has issue with certain device.
the jack plug certainly play part of this issue, a normal earphone has only two separator on the plug while the one with microphone has 3 separator (black plastic gap). So for the 3 separator you will have issue to adjust hw deep you should plug it in so it will get the correct connection for the left and right sound channel.
Related
The cool thing about the phone is that I can put it faced down to automatically turn the speakerphone and the dual microphone on.
But what if I want to do it while holding the device on my hand? I tried putting it faced down on the case (on my palm) but since it's not exactly flat, it's not working as it should
If I press the "Speakerphone" button on the TouchFlo 3D while having a call, will that give the same functionality as if the device is faced down?
Once you dialed the number just press the "Speaker" button.It works for me.
So it will also turn on the dual microphone with noise cancellation thing? Cool, good to know!
my TP2 doesn't turn speaker on.....when face down during calls....it keeps speaker off!!!!!!!!
laswettaaa said:
my TP2 doesn't turn speaker on.....when face down during calls....it keeps speaker off!!!!!!!!
Click to expand...
Click to collapse
Did you make sure your G-Sensor is calibrated?
yes am sure .... G-sensor works perfectly
works with Light sensor
After some tries I noticed Speaker was enabled with both Facedown AND Lightsensor obtured...
to my knowledge both mics work all the time whether your on speaker or not
Ah alright, good to know. The reason was because sometimes my friends went "Huh? What did you say?" when I put them on speaker mode (inside quiet my bedroom). I guess I still had to shout even with a dual microphone + noise cancellation
press and hold the call send key whilst making a call to enable both speakers.
in settingsĀ»all settings there's mic input control option (second option on mine) which supposedly increases or decreases the volume of sound captured by the mic to make sure it is not too loud or too soft. Unfortunately when I had it enabled everything captured by the mic was extremely quiet. Even with the audiorecorder if I had the mic right next to my mouth it was extremely low. So maybe it is because of that. Try disabling it, maybe your friend will hear you better.
hi!
does anyone have the same problem, that the volume in the ear piece (the one you are using when you are normaly taking a call and
hold the device to your ear) of the TP2 is pretty loud even on the lowest level?
snyfer
Does your headset have volume buttons on itsself ?
i mean the loudspeaker at the front of the HTC Touch pro 2 the one you are using when you are normaly taking a call and
hold the device to your ear
Yes, same issue on car bluetooth - too loud, TP2 BT output level is too high. I can reduce volume in car, but sound still remains a bit distorted. Not so cool but I can live with it.
anvigos said:
Yes, same issue on car bluetooth - too loud, TP2 BT output level is too high. I can reduce volume in car, but sound still remains a bit distorted. Not so cool but I can live with it.
Click to expand...
Click to collapse
sorry but I do not meant a bluetooth device - possibly there is
a better wording for that?
My issue is the ring tone volume when placed on the dock (which has a headphone jack built in). The actual noise that come from the phone not through the headphones jack but as a result of plugging the headphones jack in.
If you ring your phone, then plug a headphone jack into it while it is ringing you will hear what I mean, the ring tone goes very quiet, then when you pull it out the ring tone returns to normal (loud) again. I just want to be able to plug a jack into the phone without the ring tone level changing at all.
Basically unless your are sat next to your phone whilst it is in the dock you will miss any calls that come in............... very annoying, especially as apart from this issue the dock is a cracking bit of kit.
I've tried Dock Volume - no good.
Hey guys,
my clumsy self has gotten some water on to the phone and as it seems in the speaker grill. Right now its in a tupperware with some rice to get out the rest of the liquids but it doesnt produce any sound.
my settings is that as soon as i plug in the audio jack it opens spotify. now it behaves likes this.:
In spotify: i press play, no sound and after 1 to 2 secs the music stops ( the stop buttom becomes the play button again).
in youtube: no sound, switches to spotify after 1 to 3 secs.
alarm: beeps 3 times, stops and switches to spotify
is the speaker gone and if so, do you guys think that the stereo sound mod will help since the top speaker will ateast provide some sounds watching youtube and will wake me up in the mornings.
Using Venom and my Bluetooth volume is stuck at 50% all of a sudden. How does one resolve this annoyance?
Thanks in advance
You have to get the popup window where you confirm that too loud music can damage your hearing. Try to connect an headphone on the 3.5mm Jack, pump up the volume and confirm.
If it doesn't happen something might be broken.