hi!
does anyone have the same problem, that the volume in the ear piece (the one you are using when you are normaly taking a call and
hold the device to your ear) of the TP2 is pretty loud even on the lowest level?
snyfer
Does your headset have volume buttons on itsself ?
i mean the loudspeaker at the front of the HTC Touch pro 2 the one you are using when you are normaly taking a call and
hold the device to your ear
Yes, same issue on car bluetooth - too loud, TP2 BT output level is too high. I can reduce volume in car, but sound still remains a bit distorted. Not so cool but I can live with it.
anvigos said:
Yes, same issue on car bluetooth - too loud, TP2 BT output level is too high. I can reduce volume in car, but sound still remains a bit distorted. Not so cool but I can live with it.
Click to expand...
Click to collapse
sorry but I do not meant a bluetooth device - possibly there is
a better wording for that?
Related
Hi all,
Just got me a Sony DR-BT10CX bluetooth stereo headset. I'm new to these things, so I have a bit of a newbie question. The sound is quite good, much better than the ones that came with my HTC Touch (obviously), but there's a considerable static in the background, that seems to increase when I increase volume, but only when regulated on the headset itself. If I increase volume on my Touch (in WMP, or volume slider), the static doesn't seem to increase. I was just wondering if this is normal in these headsets? This headset sells in Holland for just under E100,-, so not really expensive, but not really low end either. Could it be a faulty headset or crappy design?
All thoughts and experiences very welcome...
Thanks,
Driekus
A2DP question
Might be a silly question, but have you tried turning the volume on the Touch up to 80% and turning the headset's hardware volume setting down??
Some A2DP stereo headsets have a particular setting they work best at..
Failing that, you may simply have a headset with firmware that really isn't perfectly compatible with your PDA...
Good luck,
Andy
www.pressdigital.com.au
Support Team
As a matter of fact the volume on my touch is currently up to 100% as is the one in WMP, so that I can keep the volume setting on my headset low, but that's not really how it should work I think. Besides, incoming calls are now very low volume, so I have to adjust the volume on the headset everytime a call comes in (and quickly lower it when I hang up in order to prevent hearing loss...) and I tend to miss appointment-announcements by MS Voicecommand because of this as well.
I guess the headset isn't perfectly compatible with my Touch, as sound sometimes skips (which is even more annoying because it doesn't happen all the time) and my pda doesn't automatically connect to my headset (solved with A2DP-plugin, see http://forum.xda-developers.com/showthread.php?p=1503123#post1503123), but I'm not sure whether the background hiss is because of this too.
Hi
I was wondering if anyone here is using A2DP for streaming music, and is having problems with the volume?
I'm using PocketTunes with a Sony Ericsson HBH-DS200 headset and I have to ramp the volume all the way to 100% in PT to get it to pump out what I think is a reasonable volume. Anything much below that isn't loud enough to drown out public transport etc, and that's using those in-ear phones that are supposed to isolate at least a bit!
I've disabled the option to limit PocketTunes volume to the system volume so the system volume setting isn't set too low or anything like that.
Weird thing is the phone speaker is nice and loud and if I plug in a wired headset then I can get a comparable volume level at around the 55-60% mark.
I'm beginning to think it might be my headset, which doesn't have a volume control on it... but I thought headsets that did have a volume control just adjusted the volume on the device which wouldn't really make any difference!
All apps seem to be limiting in this way, whether it's WMP or PocketTunes or TCPMP. There are boost options in settings but all that does is distorts my music really, which is rather distracting.
Any advice appreciated! It's hard to tell whether it's the device, the headset or the software. Running WM6.5 and have done some registry tweaking to disable joint-stereo and increase the A2DP BitPool, so the quality's fine - just too soft.
Cheers
J.
hello everybody,
Sorry if this has been already discussed, I've searched the forum but couldn't find any answer!
My ring volume is low, sometimes the vibration makes louder "noise" than the ring itself, no matter what ringtone I set. All the time the ring volume is set to maxim and I try to use only built in tones.
Any ideea how to increase the volume? Does the speaker tweak work also for this (the Audio3 para file)?
Many thanks,
Radu
my speaker is loud as ****!!! are you sure you don't have a bad speaker? time for a warranty exchange?
I agree. It does sound like you have a bad speaker. On max volume, my device is quite deafening (I usually set it down a notch).
Try playing a song at max volume without headset connected so that it'll play through the rear speakers. If the volume is satisfactory, then it's probably a software fault somewhere (ring volume vs device volume?). If the volume is still soft, then you've got a bad speaker.
Thanks
Thank you for your answers.
I did some test and I really hope it's not a speaker problem. During a phone call, on speaker, I could listen very well outside, in a crowded & noisy space. Only the ring tones seems to be lower volume, at least for my ears.
ring
i am hv
aving the same problem. mine worked great till the phone froze up and then it reset it self, and all my info was gone and the ring volume was weak.
will keep looking but thinking i will have to reflash the unit
have you installed any program?
have you installed any program before this? I realized my problems might have come from KeepMyRingTones app... after a hard reset sound seems to be better, but still not as I wanted to be.
Same problem here...I wish the ringer was really loud. I used to have a nokia n82 and really loved the ringer and speaker volumes on it. Hoping Windows 6.5 will improve the ringer on this phone.
Try installing SRS Wow HD or HDTweak
Both have increase in volume settings
does anyone else hear a background noise when using headphones? The sound is similar to tapping 2 drumsticks together repeatedly. very noticeable in max volume with no sounds. (plug in headphones, raise to max volume on home screen where there's no sound). haven't tested with other headphones and will report back after I do...
I have noticed a noise in the background... But it's more of a tv static-like sound. But my headphones are also real loud for some reason. When I plug them in I have to turn the volume way down to almost the bottom. They were designed for iPhones, which is what I used them on, but the sound quality is just so much better than the Sammy ones that came with the S3 that I still use them.
ejatds said:
does anyone else hear a background noise when using headphones? The sound is similar to tapping 2 drumsticks together repeatedly. very noticeable in max volume with no sounds. (plug in headphones, raise to max volume on home screen where there's no sound). haven't tested with other headphones and will report back after I do...
Click to expand...
Click to collapse
There is a constant low level distortion when playing anything through the headphone out on my AT&T S3 - if you pause the currently-playing music etc. it remains audible for a couple of seconds then stops - is this what you mean? Lower impedance and/or more revealing headphones accentuate the problem.
seems a simple reboot fixed the problem :good:
Hello,
I do not use the phone feature very often, but recently I had to take some calls while driving and could hardly understand what the other person is saying, because the speaker phone volume is really low.
Now, of course I set the volume to max and checked every setting I could find related to phone calls. I even went into the service menu and did the speaker tests. There I realized that the speaker phone is using a different speaker as the one that is used to play back music or other sounds. The same sound sample is used in the tests and it is much softer in the speaker phone test compared to the mono or stereo speaker tests.
Is there any hack, setting or configuration file change I can do to use the mono or stereo speaker for the speaker phone feature?
Please help, this is the only gripe with this fine phone I have.
Same problem here.
Solutions, anyone?
UP