How to enable dual microphone not on a flat surface? - Touch Pro2, Tilt 2 Windows Mobile General

The cool thing about the phone is that I can put it faced down to automatically turn the speakerphone and the dual microphone on.
But what if I want to do it while holding the device on my hand? I tried putting it faced down on the case (on my palm) but since it's not exactly flat, it's not working as it should
If I press the "Speakerphone" button on the TouchFlo 3D while having a call, will that give the same functionality as if the device is faced down?

Once you dialed the number just press the "Speaker" button.It works for me.

So it will also turn on the dual microphone with noise cancellation thing? Cool, good to know!

my TP2 doesn't turn speaker on.....when face down during calls....it keeps speaker off!!!!!!!!

laswettaaa said:
my TP2 doesn't turn speaker on.....when face down during calls....it keeps speaker off!!!!!!!!
Click to expand...
Click to collapse
Did you make sure your G-Sensor is calibrated?

yes am sure .... G-sensor works perfectly

works with Light sensor
After some tries I noticed Speaker was enabled with both Facedown AND Lightsensor obtured...

to my knowledge both mics work all the time whether your on speaker or not

Ah alright, good to know. The reason was because sometimes my friends went "Huh? What did you say?" when I put them on speaker mode (inside quiet my bedroom). I guess I still had to shout even with a dual microphone + noise cancellation

press and hold the call send key whilst making a call to enable both speakers.

in settingsĀ»all settings there's mic input control option (second option on mine) which supposedly increases or decreases the volume of sound captured by the mic to make sure it is not too loud or too soft. Unfortunately when I had it enabled everything captured by the mic was extremely quiet. Even with the audiorecorder if I had the mic right next to my mouth it was extremely low. So maybe it is because of that. Try disabling it, maybe your friend will hear you better.

Related

Help Plz! Face down Loudspeaker ain't working

Hi,
I set the option of facedown LOUDSPEAKER ON function and tried reset several times, but this is not working. even after installing tweak software which allows FACE DOWN MUTE, it is not working.....can someone provide me a solution to it!!!!!
I Would be obliged.
REGARDS.
Did you calibrate the gsensor? It won't work for me either unless I calibrate is. And it would also help if you tell use which rom you use.
htcpedia settings tool
try this app. The settings are under phone, page 2. works for me.
did u download some tweak program? i had that happened when i messed around with HD tweaks. it knocked out my speaker and i couldnt hear anything when someone called or i dialed out. it drove me crazy till i figured out what it was. it was when i was messing with the audio, trying to make it louder thru the tweak program. hopefully u get it working soon. i do love that feature, juss put the phone face down and speaker automatically cuts on. with really great sound quality. i believe the tilt 2 has 2 mics and 2 speakers. really great for conference calling. keep us updated
I use official WinMo6.5.... the problem is....when i hold it straight bottomdown,it works and just a slight movement in the angle switches it off....
ohhhh..ok...hmmm...maybe u need to calibrate the g sensor again. it sounds like its not calibrated right. or instead of putting it face down to activate speaker, during your call, juss press the speaker button and it should go into speaker phone. i dont think the g sensor messes with it in that mode. that face down thing is linked to the sensor and thats why its being thrown off.
If i put the TP2 face down on a flat surface in active call, it turns on the loudspeaker...but as soon as i lift it up and a slight change in angle switches off the loudspeaker.....is this USUAL with every TP2 or is there problem with mine?
I think that's normal. You're supposed to leave it flat on the table; picking it up again switches off the speakerphone, that's how the feature works.

[Q] CM7 - Call sound comes from behind

Hi,
yesterday I restarted my HTC Desire GSM running CM7 and during the first call I noticed that the voice of my interlocutor was caming from behind the phone (rear speaker). I tried turning the Speaker on/off several times during the call and rebooting as well but still the call speaks out from behind.
Any clue/suggestion for me? That's pretty uncomfortable
Sounds weird, do you mean it goes into speaker mode? If you do maybe there is a problem with your accelerometer. In the Sound settings is 'Flip for speaker' on, if so try turning it off. This setting may be causing your phone to enter speaker phone even though your phone isn't flipped.
I'm not an expert but maybe this is causing the problem.
It's not exactly the "speaker" because the volume is very low, exactly like a normal call but instead it comes from the rear speaker. Moreover I can turn the speaker on, which makes the volume louder but still from behind the phone (as it should be).
However I checked the call settings and the proximity is disabled. I tried enabling/disabling a couple of times but no luck at all
Any other suggestion please? Still can't hear from the right side of my phone and rear speaker definitely s**ks

[Q] [Acro S] Speakerphone volume lacking

Hello,
I do not use the phone feature very often, but recently I had to take some calls while driving and could hardly understand what the other person is saying, because the speaker phone volume is really low.
Now, of course I set the volume to max and checked every setting I could find related to phone calls. I even went into the service menu and did the speaker tests. There I realized that the speaker phone is using a different speaker as the one that is used to play back music or other sounds. The same sound sample is used in the tests and it is much softer in the speaker phone test compared to the mono or stereo speaker tests.
Is there any hack, setting or configuration file change I can do to use the mono or stereo speaker for the speaker phone feature?
Please help, this is the only gripe with this fine phone I have.
Same problem here.
Solutions, anyone?
UP

Microfone issue

Hello,
have a problem with my HTC 10 when I make standard call there is no any problems, but when I switch call to loudspeaker people tell that they can't hear me, phone usually lie on the desk during this calls.
Is this hardware issue, or software? I use Viper ROM. This phone have two microphones right, which one is used with loud speaker call?
Hello, the same speaker like without Loudspeakermode. Try another ROM at first Stockrom, shouldn't help this i recommend to contact your seller.
speaker no matter if phone is at the ear or call is in "speaker" mode works without any problem,
my problem is with microphone but only on "speaker" mode because then other side can't hear me.
to resolve it, I've bored out the microphone hole on the bottom of the case enough to make sure the mic is fully exposed and that appears to have done the trick.

Microphone issue

Mi Max 32GB V8.1.4.0.MBCMIDI
The caller will not hear me, but when turn on the speakerphone, the caller hears me well. In the service menu microphone tests everything works.
When I record my voice recorder.app everything works well. NOT working only during a call, in Skype not working too. Maybe you know how to fix this problem. Maybe this is software bug ? or broke the microphone ?
p.s. Root installed
Still problem
Hello,
This may be because of Camera issue, there are two microphones in the phone, one is the upper one next to the Earphone Jack and one at the bottom next to Speaker. When we are making a movie from the camera in Landscape mode, phone is switching to the upper microphone, (this is a noise reduction microphone) and when we make a move in Portrait mode, this is switching back to the bottom mic, somehow, when are closing the camera from a Landscape mode, phone is not switching back the mic to the bottom one, and still set for the upper mic, causing a very low sound going out for the phone call, as we are speaking at the bottom and the mic is at the upper portion. When you are turning the speaker, the bottom microphone is turning on, hence the voice is clear at the other end. Try doing a little trick, switch on your camera, record a movie in PORTRAIT MODE for 2 to 3 second and close it. Now try again doing a call, to my understanding this will work, as this works for me. Please update if this works for you as well. Best Regards
Tariq Qayyum said:
Hello,
This may be because of Camera issue, there are two microphones in the phone, one is the upper one next to the Earphone Jack and one at the bottom next to Speaker. When we are making a movie from the camera in Landscape mode, phone is switching to the upper microphone, (this is a noise reduction microphone) and when we make a move in Portrait mode, this is switching back to the bottom mic, somehow, when are closing the camera from a Landscape mode, phone is not switching back the mic to the bottom one, and still set for the upper mic, causing a very low sound going out for the phone call, as we are speaking at the bottom and the mic is at the upper portion. When you are turning the speaker, the bottom microphone is turning on, hence the voice is clear at the other end. Try doing a little trick, switch on your camera, record a movie in PORTRAIT MODE for 2 to 3 second and close it. Now try again doing a call, to my understanding this will work, as this works for me. Please update if this works for you as well. Best Regards
Click to expand...
Click to collapse
THis landscape-portrait camera trick doesn't work on my phone.
My upper microphone works (noise reduction mic works in loudspeaker voice microphone mode). But bottom mic doesn't work. I replaced this mic, then i replaced bottom board and its flex. Nothing helps.
1.8V comes to the mic.

Categories

Resources