hey ive noticed that whenever i used it on jb roms, my sdcard would not be recognized. I really want to fix this because this is probably the fastest kernel ive used
Dbzavatar said:
hey ive noticed that whenever i used it on jb roms, my sdcard would not be recognized. I really want to fix this because this is probably the fastest kernel ive used
Click to expand...
Click to collapse
Probably has to do with the format your SD card is in. Seems FAT32 or EXFAT can have problems. Im having similar problems right now and am attempting to fix.
Try to find out what your SD card is formatted to and post.
Related
Hi All,
I was hoping someone can help me with a pretty dumb problem. I can't for the life of me figure out why my SD card can't be found in CWM3 after installing the latest ROMS based on EB13 and using the OC kernel. I continue to get a volume unkown error. I have formated the card several times in the past few days and at first its fine but then I'm stuck without CWM3.
CWM 3 EXT4 and SD card
I am having the same issue, not sure why. Seemed to work fine at first and now nothing. Any help would be awesome.
Thanks
mzahiri said:
Hi All,
I was hoping someone can help me with a pretty dumb problem. I can't for the life of me figure out why my SD card can't be found in CWM3 after installing the latest ROMS based on EB13 and using the OC kernel. I continue to get a volume unkown error. I have formated the card several times in the past few days and at first its fine but then I'm stuck without CWM3.
Click to expand...
Click to collapse
I have tried everything...odined 13-extended and still get "Can't mount SD card"
This problem seems to be common but haven't found a solution.
Any help would be great!
Clicked repartition in Odin...
Popped sd card in and out and rebooted
nothing
I have this problem using an app like quick boot but three finger should work just fine. It's because of the redirector.
hammerbrain said:
I have tried everything...odined 13-extended and still get "Can't mount SD card"
This problem seems to be common but haven't found a solution.
Any help would be great!
Clicked repartition in Odin...
Popped sd card in and out and rebooted
nothing
Click to expand...
Click to collapse
Quick question - - are you using any kind of redirector to try to get into recovery? (IE: Rom Manager or QuickBoot)
I know that a lot of issues with CWM after EB13 flashes are because something in the kernels "breaks" the re-director.
Have you tried doing the "3-finger death grip"? I'm still not able to use an outside program to get into a working recovery. I can get into the situation that you guys are talking about, but not a working CWM 3.x. However, using the 3-finger approach, CWM 3 comes up and sees my card and everything is fine.
I am fine doing it this way until I can research the forum a little to see if their is a stable/permenant fix.
Hope this helps!
ive been trying to install a custom rom on this dam epic 4g for 2 days now, ive faced every problem imagionable, i just wish i could flash a custom rom with odin.. and not have to do it thru clockwork.. but thats besides the point, my SD card is not mounted.. dont ask me how it happened, but it did.. ive reflashed two stock esclair firmwares with odin, it doesnt seem to help any.. so how can i mount my sd card?
soraxd said:
ive been trying to install a custom rom on this dam epic 4g for 2 days now, ive faced every problem imagionable, i just wish i could flash a custom rom with odin.. and not have to do it thru clockwork.. but thats besides the point, my SD card is not mounted.. dont ask me how it happened, but it did.. ive reflashed two stock esclair firmwares with odin, it doesnt seem to help any.. so how can i mount my sd card?
Click to expand...
Click to collapse
Could try to format it, can you see it with your PC (in mass storage mode)?
If not take it out and put it in a card reader and format it.
Might be some corrupt stuff <technical term> preventing it from mounting.
Also, try another sd card just for sanity sake.
Good luck
Hey guys I have a few questions to ask. Wen I first flashed my first sense 3.0 gingerbread rom it had recommended to partition my sd card cuz of the amount of memory the rom used up. I followed the instructions carefully to partition and it seemed to have been successful wen I was done (I think I used Amon RA recovery). I have a Lexar 32gb class 10 card and since then I have flashed several 3.0 sense gingerbread roms and my internal memory on everyone has always been around 90 to 110 mb causing my phone to be extremely laggy. At the point wat should I do? Is there a way to check if my card is partition properly? Should I try to repartition card or would this cause me to have future read error problems on my sd card? Any advice wud b helpful, THANKS! Just want my phone to b fast like it was before.
jro73 said:
Hey guys I have a few questions to ask. Wen I first flashed my first sense 3.0 gingerbread rom it had recommended to partition my sd card cuz of the amount of memory the rom used up. I followed the instructions carefully to partition and it seemed to have been successful wen I was done (I think I used Amon RA recovery). I have a Lexar 32gb class 10 card and since then I have flashed several 3.0 sense gingerbread roms and my internal memory on everyone has always been around 90 to 110 mb causing my phone to be extremely laggy. At the point wat should I do? Is there a way to check if my card is partition properly? Should I try to repartition card or would this cause me to have future read error problems on my sd card? Any advice wud b helpful, THANKS! Just want my phone to b fast like it was before.
Click to expand...
Click to collapse
I don't think its your SD card partition that's acting up, some phones just don't go well with certain ROMs. What ROM are you using? Also you can always try overclocking by flashing a kernel that supports it like either netarchy's kernel or Lithid's Freedom kernel(the latter of which is my personal favorite) that should reduce lag.
Sent from my Synergized Freedom Evo.
Well lets see the first one that came out I think it was the Viper Kingdom Rom, then Kings Rom Alliance 3.0 Hybrid 3D, Kinged Shooter E3D and one more but I cant remember wat it was. Thats 4 already so I dont think its my phone thats not taking good to these roms. Ive tried flashing different kernals and that did not work. There must b something that I can do to fix this problem. My phone never had problems with any froyo roms only the new gingerbread roms. Now I will tell u I hav not flashed the new radios,PRI or any of those updates, can that maybe b a factor? Wud u recommend me to do so?
I was on CM10 for the longest time but i got tired of the issues so i went back to touchwiz. I clean installed Wicked Sensations (jellybean) and it told me my SD card was dead, so I did a LLF. Now on any TW ROM it says it is blank and I need to format it, so with the phone I tell it to format it, but it doesn't, it says it does but it never does. Now I'm back on CM10 and it can't mount it! I need help!!! What should I do?
EDIT: After putting in my old 16GB SD card on CM10 my 32GB one works! But only the 32GB and only on CM 10.0.0 (stable) meaning no nightly( already tried) and no touchwiz
jamcar said:
I was on CM10 for the longest time but i got tired of the issues so i went back to touchwiz. I clean installed Wicked Sensations (jellybean) and it told me my SD card was dead, so I did a LLF. Now on any TW ROM it says it is blank and I need to format it, so with the phone I tell it to format it, but it doesn't, it says it does but it never does. Now I'm back on CM10 and it can't mount it! I need help!!! What should I do?
EDIT: After putting in my old 16GB SD card on CM10 my 32GB one works! But only the 32GB and only on CM 10.0.0 (stable) meaning no nightly( already tried) and no touchwiz
Click to expand...
Click to collapse
bump....
No one has any idea what to do about this???
Well stick the SD card in a regular PC or Mac and try to format it, and see what happens..
Im looking for a Kernal that can read 64gb card on darthstalker rom?
Stock kernel that comes with it will support 64gb. Most if not all TWiz ROMs and kernels will support a 64gb. It is the AOSP ROMs that are particular about it and the kernel match ups. Mine worked on Darth just fine from day one, but I've moved on since then.
Woodrube said:
Stock kernel that comes with it will support 64gb. Most if not all TWiz ROMs and kernels will support a 64gb. It is the AOSP ROMs that are particular about it and the kernel match ups. Mine worked on Darth just fine from day one, but I've moved on since then.
Click to expand...
Click to collapse
It doesnt recognize mine maybe i need to reformat it? only stock one sees it.
Same Issue
I too was looking for a way to get Darth Stalker V3 to read my 64GB External MicroSD. I have used a couple of applications and they all show around 12GB, though I may be reading it wrong.
It was also be nice to have it read my ext-sdcard as my internal so that I can install more apps, etc. I know there are workarounds and custom kernels out there, but a lot of the workarounds seem a bit intensive, and as I am a noob at all of this, I really just don't want to brick my phone...almost did that installing LiquidSmooth ROM...it was a no bueno day. Thankfully I flashed back to stock and then re-rooted and saved myself lots of $$$.
Anyways, anyone else having this issue, or figured out a fix?
found a formatter thats called guiformat from ridgecrop. this formatted and i switched to twrp . now everything is working good with faux kernal and it reads my 64gb sd.
Just curious, what's the purpose of external storage?
(I'm assuming your talking about plugging in an external card reader/flash drive to the mhl USB connector?)
Sent using T999 with DarthStalker ROM