Please help on question! Lagging issues!!! - EVO 4G Q&A, Help & Troubleshooting

Hey guys I have a few questions to ask. Wen I first flashed my first sense 3.0 gingerbread rom it had recommended to partition my sd card cuz of the amount of memory the rom used up. I followed the instructions carefully to partition and it seemed to have been successful wen I was done (I think I used Amon RA recovery). I have a Lexar 32gb class 10 card and since then I have flashed several 3.0 sense gingerbread roms and my internal memory on everyone has always been around 90 to 110 mb causing my phone to be extremely laggy. At the point wat should I do? Is there a way to check if my card is partition properly? Should I try to repartition card or would this cause me to have future read error problems on my sd card? Any advice wud b helpful, THANKS! Just want my phone to b fast like it was before.

jro73 said:
Hey guys I have a few questions to ask. Wen I first flashed my first sense 3.0 gingerbread rom it had recommended to partition my sd card cuz of the amount of memory the rom used up. I followed the instructions carefully to partition and it seemed to have been successful wen I was done (I think I used Amon RA recovery). I have a Lexar 32gb class 10 card and since then I have flashed several 3.0 sense gingerbread roms and my internal memory on everyone has always been around 90 to 110 mb causing my phone to be extremely laggy. At the point wat should I do? Is there a way to check if my card is partition properly? Should I try to repartition card or would this cause me to have future read error problems on my sd card? Any advice wud b helpful, THANKS! Just want my phone to b fast like it was before.
Click to expand...
Click to collapse
I don't think its your SD card partition that's acting up, some phones just don't go well with certain ROMs. What ROM are you using? Also you can always try overclocking by flashing a kernel that supports it like either netarchy's kernel or Lithid's Freedom kernel(the latter of which is my personal favorite) that should reduce lag.
Sent from my Synergized Freedom Evo.

Well lets see the first one that came out I think it was the Viper Kingdom Rom, then Kings Rom Alliance 3.0 Hybrid 3D, Kinged Shooter E3D and one more but I cant remember wat it was. Thats 4 already so I dont think its my phone thats not taking good to these roms. Ive tried flashing different kernals and that did not work. There must b something that I can do to fix this problem. My phone never had problems with any froyo roms only the new gingerbread roms. Now I will tell u I hav not flashed the new radios,PRI or any of those updates, can that maybe b a factor? Wud u recommend me to do so?

Related

need a desire vets advice

hello all. i just recenlt bricked my galaxy s telus fascinate and got a desire replacement. i managed to get the root working without a issue (was superscared because of previous brick). now im looking for a rom. a good rom. coming from touch wiz, sense is mint. i love it.
so i want something that like stock sense with sense widgets without all the bloat and hopefully a proper app2sd (the stock app2sd is only moving like 1/3 of the data to sd and 2/3 is stayin in internal storage) . i heard desire hd roms r good but i dont really see the upside cause i dont know much about the phone yet just the OS. im runnin froyo 2.2 with hboot 93.0001.
any info would b mint. thx in advance
ps. only 1 day in, and the desire is running laps around the fascinate in every aspect except afew hardware issues like
-no internal sd card
-psx4droid is alot slower but i do own a hacked psp so no biggy
-and the app2sd sucks considering i went from 2 gigs internal storage to 133 mbs
but interface rocks. awaiting some opinions
You may want to take a gander at this thread: http://androidforums.com/desire-all-things-root/231930-desire-index-everything-desire-here.html
It has links to all the usual suspects when it comes to the different ROMs available, and once you get familiar with the ones that are out there you can do more detailed searches to see which one you may like the most. After that just download and get to flashing. As long as you nandroid backup before flashing anything you can always go back.
Staggers said:
You may want to take a gander at this thread: http://androidforums.com/desire-all-things-root/231930-desire-index-everything-desire-here.html
It has links to all the usual suspects when it comes to the different ROMs available, and once you get familiar with the ones that are out there you can do more detailed searches to see which one you may like the most. After that just download and get to flashing. As long as you nandroid backup before flashing anything you can always go back.
Click to expand...
Click to collapse
im looking for something exact replica of sense with a proper data2sd, bloatware removed. i heard desire hd roms r nicer but i really cant tell from videos on youtube. also i find sense alil bit slow in the home screen scrolling. is there any sense desire hd roms that can fix these issues?
LeeDroid 2.3d - superfast sense based 2.2 rom, with the stuff you need.
Baadnwz 1.8c- i'm using it now, a great HD port, but not as fast as the LD.
nagypapi said:
LeeDroid 2.3d - superfast sense based 2.2 rom, with the minal stuff you need.
Baadnwz 1.8c- i'm using it now, a great HD port, but not as fast as the LD.
Click to expand...
Click to collapse
what about kernels? i had a overclocked voodoo kernel on my sgs and it ran games and emulators amazingly. ff9 on ps4drioid was running like 95% speed. any speed kernels or voodoo kernels available? and allso i hear the best way to manage storage is data and app2sd +. how do i go about installing that? b4 or after i flash the rom?
1. The Desire has an Adreno GPU, not a PowerVR SGX - so the graphics performance will be MUCH more slower, than the GS'. Also I use this kernel, gives me the best performance.
2. Most custom ROMs have that feature preinstalled (so installs automatically, when flashing the ROM), just make sure you have partitioned your SD Card (fat32+ext 2/3/4).
nagypapi said:
1. The Desire has an Adreno GPU, not a PowerVR SGX - so the graphics performance will be MUCH more slower, than the GS'. Also I use this kernel, gives me the best performance.
2. Most custom ROMs have that feature preinstalled (so installs automatically, when flashing the ROM), just make sure you have partitioned your SD Card (fat32+ext 2/3/4).
Click to expand...
Click to collapse
how do i go about partitioning the sd card? lm fat with a fresshreformat from my pc. now im quite sure ext/4 is the safest and most stable partition to use and 2 being the worst. on sgs, voodoo did the ext/4 for me and didnt have to do the work. so im confused on this part since ive seen nothing with a voodoo tag on it since i joined. and voodoo had to be deactivated everytime u flashed new software. does that still apply here>?
Use Gparted or easus partition for that.
Create a FAT32 partition first and then an ext4 partition (both primary).
You have to look for a2sd+ here in the ROMs description to make it work (LeeDroid definiately works). Make sure you have partitioned the SD card then just flash the ROM (of course nandroid backup first & full wipe) and it will go, you have to do nothing. It is an auto-script.
nagypapi said:
Use Gparted or easus partition for that.
Create a FAT32 partition first and then an ext4 partition (both primary).
You have to look for a2sd+ here in the ROMs description to make it work (LeeDroid definiately works). Make sure you have partitioned the SD card then just flash the ROM (of course nandroid backup first & full wipe) and it will go, you have to do nothing. It is an auto-script.
Click to expand...
Click to collapse
k im donwloapding gparted partition. how do i do this? i have a nandroid backup of stock with root and it says i will lose my data. and how does the program work? im finding the htc hacking to have alot more work involved then sgs. how do i backup my nandroid? can i copy and paste to my pc?do i partition thru the phone or pop the card out and put it directly into the pc?
how do i use this program?
A very good tutorial how to use Gparted, if you have no idea.
+Make sure you create a boot CD/USB correctly
How did you root your desire? With Unrevoked? What custom recovery do you have CWM or Amon RA?
How to make a nandroid backup.
Also search youtube and this forum on HOW to use a custom recovery.
k so i used some windows partition creator and partitioned fat32 with a 1.5 gb ext3 partition. flashed rcsmixhd. looks mint. running good so far. got the telus network working. only thing i really need 2 know is how does the app2sd+ work? does it automatically install it too sd? or do i haveta use a app? or can i go thru the settings applicqations manage move to sd card? this is all i have left todo so plz advice is a must
nvm i looked around and foundout titanium backup shows apps2sd drive. sweet. thx 4 all the help so far desire has a large lead on the fascinate. looks so beautiful

LeeDroid Problem

Hi everyone i rooted my phone last night for the first time with LeeDroid, all that seemeed to happen was that it went back to the way i got the phone in the first place
I dont have Market, and if im honest i have no idea what to do
Can anyone help at all please ?
Thanks
Phil
Would i be better just downloading the 2.4 rom and trying that ?
How will i know that the ROM is installed correctly as like i said before it just seems like a new phone i got straight out the box ?
thanks
When you flashed the ROM did you do a full wipe? and Dalvik Cache too?
Matty Matt said:
When you flashed the ROM did you do a full wipe? and Dalvik Cache too?
Click to expand...
Click to collapse
Honest answer , dont know
i think i rooted it correctly using Revoked, or it appeared like it did
in the software info on the phone it has this which to me means nothing but to someone it will
android 2.2
kernel version
2.6.32.15_leedroid_2.3 [email protected] # 1
software number
LeeDroid_V2.3d
Can you help ? thanks
That is a successful flash mate by the looks of it. Of course you lose all apps and settings after flash, and as far as I know leedroid is a sense Rom, so it looks very similar to what you got out of the box, but now you can mod it and flash different kernels and scripts, like data2ext.
Oh, and regarding market, just search for market apk and install it the way you'd install any app.
Sent from my HTC Desire using XDA App
LeeDroid looks and feels like a stock rom but with added extra bits, and speed.
you can overclock or underclock with setcpu run rooted apps.
the good thing about LeeDroid is that it looks familiar so it's a good starter rom to play about with. if you want something other than sense try a Miui rom or Redux.
Ive got 2.4 now but i have 2 issues
1. the market force closes when i select an app
2. when adding the htc people widget it lists no people in where they usually
Thanks
Now my SD card is saying Mounted Read only ?
any ideas ?
did you make an ext partition and a full wipe?
I don 't have any issues with this rom
Yes and i just tried to go back to delete and redo a new partition but its not showing only my pc is ???
i just reset it and now im getting the leedroid background i wasnt getting before , ive had to setup everything back from the beginning , facebook passwords etc
market is now working but im still getting the mounted read ony error
Either corrupt card or bad partitioning. Just partition it in recovery and search for ext align tool on Baadnewz blog. Google is your friend.
If partitioning doesn't help, try different card.
Sent from InsertCoin 2.0.1
ok sorted that last issue but how will i know if ive partitioned the sd card correctly ?
ive got a 16gb one and it says total space 13.75 & available space 13.47gb
and on the internal it only says 129mb
why is this ?
What was the fix for the last issue? If you don't provide full info we won't know where it could have fine wrong.
Sent from InsertCoin 2.0.1
tinky i partitioned it as you said in recovery but then i couldnt get past the loading screen with the joker on it aftwerwards
So i went back into recovery and i had to do a restore that was the only way i got it working and the memory card issue also vanished
Now its working properly should i backup my current ROM in ROM manager ?
what else do i need to do to make sure i dont **** it up in future ?
Also how will i know if ive partitioned the sd card correctly ?
ive got a 16gb one and it says total space 13.75 & available space 13.46gb
and on the internal it only says 116mb
How much space you assigned to ext? Also, not all roms support ext4, so if you did use align tool, then quite possibly that your Rom just can't see ext partition. Solution, partition again but this time don't use align tool which will convert any ext partition to ext4.
Regarding not loading after partitioning that is sort of expected, restore done the trick for you. Regarding not getting into this situation again, once you get it right just use recovery to do nandroid and ext backup, and keep it safely on pc, in case you need to change SD card. Then you just partition new card and do restore.
Sent from InsertCoin 2.0.1
Brilliant , thanks Tinky
Did it work?
Sent from InsertCoin 2.0.1
Anyone having issues on the latest Leedroid 2.4 with apps that have been updgraded from in-app billing?
Have one app (quota) which is now disabled due to the fact that the upgrade is now in progress whereas it worked fine on 2.3d.
The app dev suspects it is ROM and market related as other stock ROM users haven't had the same issue.

[Q] Virus' Roms

I have noticed for most of his roms that he has been stating in the OP that you must partition your SD card. Is that really necessary, I am quite happy with how the latest CyanogenMod since it is working for me, but would like to try out his newest Kingdom rom due to it being Sense 3.0. So my questionis:
Would it be ok for me to just do factory reset, wipe cache, and wipe dalvik and then flashing his rom along with the pri downgrade and stock kernal?
DNarsingh said:
I have noticed for most of his roms that he has been stating in the OP that you must partition your SD card. Is that really necessary, I am quite happy with how the latest CyanogenMod since it is working for me, but would like to try out his newest Kingdom rom due to it being Sense 3.0. So my questionis:
Would it be ok for me to just do factory reset, wipe cache, and wipe dalvik and then flashing his rom along with the pri downgrade and stock kernal?
Click to expand...
Click to collapse
I know that you can do that, however, you partition your SD Card so that it can store ROM cache and application cache without taking up your internal memory. These new 3.0 ROMs are extremely large and take up a lot of internal storage on your phone. So if you don't partition your SD you will be out of memory on your phone really fast. Hope that helps and answers your question.
drgonzo712 said:
I know that you can do that, however, you partition your SD Card so that it can store ROM cache and application cache without taking up your internal memory. These new 3.0 ROMs are extremely large and take up a lot of internal storage on your phone. So if you don't partition your SD you will be out of memory on your phone really fast. Hope that helps and answers your question.
Click to expand...
Click to collapse
Yes that does help, thanks. Also, you wouldn't by any chance know if we have to use that stock kernal, do you? Are other kernals compatible? I have seen that some people are using the Tiamat one, but I would like to use the latest Savage Zen if its possible.
You don't need to flash the stock kernel fyi. It's already baked in. He put it there to d/l in case you try an alternate kernel and don't like the results, you can always flash back to stock kernel. Most alternate kernels Bork the camera and our video capability. I have only stuck with the stock kernels, i have no suggestions on alternates.
Sent from my Infected EVO using XDA Premium App.
DNarsingh said:
Yes that does help, thanks. Also, you wouldn't by any chance know if we have to use that stock kernal, do you? Are other kernals compatible? I have seen that some people are using the Tiamat one, but I would like to use the latest Savage Zen if its possible.
Click to expand...
Click to collapse
As far as I know, none of the alternative Kernels work 100% since the devs don't have the actual release to rip apart. Most of the kernels were built for Froyo and can run on Gingerbread and Sense 3.0, but like KB112 said it will bork the cam.
I came from CM7 as well, I loved it but I missed sense, this kingdom rom virus is working on is really nice, unless you are a sense hater I recommend trying it. I would also just go ahead and partition your sd card, roms and just getting bigger and bigger and htc still havent figured out that we always need more system space then they give us.
it is not required, but it will give you a lot more space to install your apps from the market
Ok thanks guys, now I guess I just need to get my new card and then I will partition it
Sense 3.0 Roms...cant get past White HTC EVO 4g screen
I have been having a MAJOR problem flashing any of Viruses Sense 3.0 roms. I've tried A0.1 and A0.2. I have partitioned the SD card (2GB on ext3, the SD card is the one the phone came with), wiped, wiped, and wiped again. The rom installs on the phone fine, but when I try to flash it, it never goes past the white HTC EVO 4G screen. The white screen stays on for about 20 seconds, goes off, then comes back on again, and this cycle happens over and over again. I've let the phone sit for up to 15 minutes at a time, but it never goes past the white screen. I've never seen the rom's splash screen. Multiple battery pulls and restarts haven't helped. I can't figure out what is going on. If anyone can point me in the right direction, I would appreciate it. I tried flashing the DoubleShot rom, same results. Thanks in advance.
scorpio1107 said:
I have been having a MAJOR problem flashing any of Viruses Sense 3.0 roms. I've tried A0.1 and A0.2. I have partitioned the SD card (2GB on ext3, the SD card is the one the phone came with), wiped, wiped, and wiped again. The rom installs on the phone fine, but when I try to flash it, it never goes past the white HTC EVO 4G screen. The white screen stays on for about 20 seconds, goes off, then comes back on again, and this cycle happens over and over again. I've let the phone sit for up to 15 minutes at a time, but it never goes past the white screen. I've never seen the rom's splash screen. Multiple battery pulls and restarts haven't helped. I can't figure out what is going on. If anyone can point me in the right direction, I would appreciate it. I tried flashing the DoubleShot rom, same results. Thanks in advance.
Click to expand...
Click to collapse
Not sure of your issues as it both had worked well for me. (though I am back on gingersense b4 until a bit later tonight) You may want to do a bit of reading in the roms thread.
As a side note though the original card is only class 2 (read quite slow) and therefore will not be of much use to run data or apps from anyway. 16gb class 10 cards can be gotten on amazon for about 25 - 30 bones. (maybe cheaper)
Thanks for the response. I was wondering if the SD card was the problem. I will look into getting another one. Just curious to see if anyone else had any ideas.
can anyone help?
i had troubles flashing last night. mine would actually hang on the white evo 4g screen and not go any further. i would pull the battery and reflash and it would work.i must have flashed about 6 or 7 times trying to get everything in order. finally got all the icons to show up and seemed to work right except the weather would crash and the gallery would just show a white screen, never partitioned the sd card though. so now i am loading all my stuff back to the sd card after a partition. there was two parts to the partition, first size i put was 1 gig and the second size it asked for i put 512k. i don't know what each one is for but what do i do after i finish transfering everything back on. just flash as normal? do i actually see the extra partition and put something in it?
from what i saw last night this sense 3.0 is true eye candy. you can't get enough of it. it looks really sexy!

NOOB flashed [ROM][01/08][STABLE][Sense2.1+3.0 GB]InsertCoin CM7 HBOOT/STOCK 1.0.9

so first i flashed [ROM][01/08][STABLE][Sense2.1+3.0 GB]InsertCoin CM7 HBOOT
and it did work perfectly, except when i started to backup apps, it didn't put those to ext4 partition i made, it put those to internal mem and i ran out of space pretty soon. Tried to work my way somehow, but didn't find any useful tips.
So then i flashed [ROM][01/08][STABLE][Sense2.1+3.0 GB]InsertCoin STOCK 1.0.9
and same thing, except this time i made ext3, but apps are still going to internal memory, even tho that both of these should automatically transfer apps to ext? partition.
Steps i made if someone sees something wrong:
1. Rooted with unrevoked
2. Changed recovery to Amon Ra
3. Backed up everything
4. Formatted and partitioned SD
5. Flashed ROM
i don't think i made anything wrong since everything is working perfectly, but what do i know, i'm just stupid construction worker with only basic technical knowledge.
So if i need something or need to do something, please help me.
if important, that CM7 hboot was with A2SD and Stock Hboot is with A2SD+
S*HIT, i'm too confused but that sense 3.0 is really beautiful and this whole thing made my desire to be in new level
Naah, figured out already. Now 150 apps and still almost 110mb free space at internal memory
Sent from my HTC Desire using XDA App
Glad you figured it out, could say what you did wrong though for people who will encounter same issue.
Don't know bro, stubborn as I am, I flashed it 3rd time and it worked.
To be exact I flashed that [ROM][01/08][STABLE][Sense2.1+3.0 GB]InsertCoin STOCK 1.0.9
with 1gb ext3.
Doubled my score in quadrant earlier today
Has anyone tried the honeycomb sense version of IC's rom? I keep getting a bootloop on the stock one. Does anyone else have the same problem?

hTC Desire keeps freezing after on rooted ROMs

Hey guys.
A while ago I`ve rooted my hTC Desire and did an S-OFF, to be able to install custom ROMs.
I`ve "tested" a few custom ROMs, but none of them seemed to be stable.
Currently I`m on SuperNova_Classic_2.0.2.0 with built in Data2SD (iData2SD)(the idea is to have a stable rooted ROM, with DATA2SD and Sense), but every time I flash the rom, then install my fav apps, the phone keeps freezing at certain points, sometimes it runs OK for a week - with no freezing - other times it freezes in the first couple of days after ROM flash. I`ve tried not to install that many apps, but I`m still facing this freeze problem.
Has anyone experienced this before?
Here are the steps I took for ROM flashing
1. Created a 1GB ext4 partition on SD-CARD, preceded by a FAT32 partition(as required in the tutorial of Supernova)
2. Rebooted into Recovery - wiped data/factory reset; wiped cache partition; wiped Dalvik Cache
3. Installed the ROM zip file from SD-CARD; on first boot, except for the Wi-Fi connection, I haven`t touched anything(google accounts etc. - skipped all steps - ), waited for the system to stabilyze, then did a normal reboot in order for the DATA2SD function to work. After next reboot, DATA2SD was working properly(I even had the pink LED light up), Storage Information was showing the 1GB ext partition as an internal memory.
4. Installed all my apps, configured phone, widgets etc.
This way, at a certain point, the phone simply freezes, have to remove the battery to be able to use it again.
Here are my phone specs:
Bravo PVT1 SHIP S-OFF
HBOOT-6.93.1002
MICROP-031d
TOUCH PANel-SYNT0101
RADIO-5.17.05.23
ClockworkMod Recovery v5.0.2.0
Transcend class 4 - 16GB microSD card
I`ve searched and searched on xda-developers, but haven`t found an answer for my problem, yet.
What am I doing wrong here?
Any help would be DEEPLY appreciated !!!
This is no help to you.... but I'm having exactly the same issue.
Sometimes it freezes when starting a game, but most of the time it won't unlock(ie phone unresponsive when I try to wake it).
This is not ROM related as it happened on several different Roms, with a full wipe between. I'm not overclocking.
The only things I can think of are:
-Partially corrupt ext partition on SD.
-failing hardware.
-some other sw issue ie radio(which has worked for a while before this started happening).
Thanks for your reply, Shaun - it does help, at least now I`m not alone in this
You`re right, it`t not ROM related, I`ve tried different ROMs myself, same problem.
I`ve also tried another SD CARD (class 2).
I don`t think it`s the radio, I have the latest version, the version required on Supernova tutorial for best compliance.
I really don`t want to believe that it`s a hardware fault, as I didn`t overclock either and always read/followed the exact right/official steps in root-ing/flashing ROMs.
I`ve reinstalled Supernova now, with absolutely no additional installation of fav apps. Going on 2 days with no freezeing, so far.
I`ll keep post-ing if any new developments occur.
Cheers.
You've not installed any apps at all? hmmm.
When you do re-install your apps(I assume from Titanium backup?), it'd be interesting to see if it starts freezing again.
This would then suggest either a dodgy app that we both have, or titanium backup itself causing the issue.
What SD card specs?
Sent from my HTC Desire using xda premium
rootSU said:
What SD card specs?
Click to expand...
Click to collapse
I'm using the same card that i've had for the last 18 months-
it's an 8gb class 2 card with 768mb partition, the rest is Fat32.
I`ve started reinstalling some of the apps, the most important ones, like iGo, YahooMessenger, YahooMail, etc., but didn`t use Titanium Backup, installed them manually using Market.
So far, so good, no freezing.
My SD CARD specs: Transcend Class 4 - 16GB; 1GB ext2 partition for apps, and the rest is FAT32.
LE
I could be wrong, but from what I`ve seen so far, I would recommend NOT to use widgets that require superuser permissions. Also, before flashing any pre-rooted ROM, be sure to turn "Signature verification" OFF, in the phone`s "Recovery" screen options. If your ROM has any kind of "Data2SD" scripts integrated, after flashing ROM - at first boot, DO NOT configure anything (google account, sync, etc.), DO NOT download/install any apps yet, ONLY enter the Wi-Fi settings(if that is the case); leave the system to stabylize, then do a normal reboot(if the ROM supports "Fast boot" - turn it OFF before rebooting). At second normal boot, the DATA2SD scripts should kick in ( u should see the phone`s notification LED turn to: pink or blue - depending on the script used by the ROM).
A class 2 is a definite no no for Data2sd IMHO. Class 4 is debatable. I had a bit of lag with an older version of data2sd on a class 4. It may be better now, Depends what speed the card writes at really. If its minimum for class (4 MB/s) that could be a bit touch and go. EXT 4 would be the best option for the 2nd partition
I recommend using an a2sd+ solution temporarily to see if the freezes go away
I would mind the lag, I didn`t get any lag using my card though, but just saying, would mind if it would be laggy, the real problem is the constant freezing I`ve had.
If it`ll freeze again, I think I`ll go back to stock Froyo, use Apps2SD and install only the bare minimum.
U know, another thing I never quite understood, I think hTC makes one of the best smartphones on the market, but they limit their possibilites with small batteries and very little internal storage space. What`s up with that?
rootSU said:
A class 2 is a definite no no for Data2sd IMHO.
I recommend using an a2sd+ solution temporarily to see if the freezes go away
Click to expand...
Click to collapse
I'm not using Data2SD. I'm using A2sd+. Same partition that I used on my Hero, and now my Desire for the last 14 months. Still getting freezes.
I don't think it's a speed issue.
a2sd should be fine on a class 2. What a2sd solution is it? Did you move dalvik too?
Its just a logical approach thats needed.
1) Eliminate the SD card by not running from it.
2) Change the rom
3) RUU
If after all that it still freezes, sounds like HW....
rootSU said:
a2sd should be fine on a class 2. What a2sd solution is it? Did you move dalvik too?
Its just a logical approach thats needed.
1) Eliminate the SD card by not running from it.
2) Change the rom
3) RUU
If after all that it still freezes, sounds like HW....
Click to expand...
Click to collapse
Yeah that's pretty much what I was thinking.
I'm currently on InsertCoin with A2SD+. I was on LeeDroid, then RunnyMede before that with the same issue. I did a full wipe when swapping Roms. Not sure about Dalvik- if it's done in the Rom then yes, otherwise I haven't consciously moved it.
1) I might try a different SD that i have lying around- Nandroid it etc.
2) As above, already done that.
3) Last resort. Although a rooted RUU wouldn't be a massive issue for a day or 2.
If it's HW, I better get some insurance.
Edited to add: my SD card is actually a class 4. SD card tests suggests read speeds of 19-20mb/s and write speeds of 7-9mb/s.
Fixed my issue. It's the Kernel. Apparently the latest 2 kernels have the ability to undervoltage when not in use. Unfortunately, this can also cause the lockups i've(and possibly you've) been experiencing.
The last kernel without this in is: 2.6.35.14_110911.
This has 100% solved my issue and I recommended flashing it if you still having the same issue.
Great.
If I get another freeze, I`ll flash the 2.6.35.14_110911 kernel u`ve recommended.
Thanks a lot, dude.
If ever in Romania, look me up, got a few beers with your name on them
LE
If it`s not too much to ask, could you possibly post a download link for that kernel version?
i_cs_u said:
Great.
If I get another freeze, I`ll flash the 2.6.35.14_110911 kernel u`ve recommended.
Thanks a lot, dude.
If ever in Romania, look me up, got a few beers with your name on them
LE
If it`s not too much to ask, could you possibly post a download link for that kernel version?
Click to expand...
Click to collapse
No problem.
I've never been to Romania...
Kernel at the bottom of this post:
http://forum.xda-developers.com/showpost.php?p=18894823&postcount=10450
Did you flash the kernel while on existing ROM, or did you reflash de ROM as well?
And what ROM are u using with this kernel?
try using the earlier versions of super nova and data2sd, I also had the freezing problem but that was AFTER I upgraded to the newest version of supernova and data2sd
I`m using the 2.0.2.0 version, not the latest 2.4.0.0.
Earlier than 2.0.2.0?
i_cs_u said:
Did you flash the kernel while on existing ROM, or did you reflash de ROM as well?
And what ROM are u using with this kernel?
Click to expand...
Click to collapse
Flashed straight over the top. Insertcoin ROM.
Use the latest Supernova and see. It has a pretty good kernel.

Categories

Resources