Related
Ok, so basically i have just gone ahead and followed these steps for flashing cyanogenmod:
wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Arc:_Full_Update_Guide
When i got up to step 7, i wasn't able to load clockwork mod, and because i am a noob and new to this, i actually didn't know that i had to install it beforehand. So now, i've got a phone which wont turn on properly (stuck with a lit up black screen) and will only connect into fastboot
Please, somebody help me!!!! I am really scared that i may have bricked my phone, if i can do anything to get it running again, i would be so happy. Please help
did you flash the CM kernel? and CM recovery comes with the kernel..you dont need to install it separately..
xperiaarcsnoob said:
Ok, so basically i have just gone ahead and followed these steps for flashing cyanogenmod:
wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Arc:_Full_Update_Guide
When i got up to step 7, i wasn't able to load clockwork mod, and because i am a noob and new to this, i actually didn't know that i had to install it beforehand. So now, i've got a phone which wont turn on properly (stuck with a lit up black screen) and will only connect into fastboot
Please, somebody help me!!!! I am really scared that i may have bricked my phone, if i can do anything to get it running again, i would be so happy. Please help
Click to expand...
Click to collapse
Alright first thing first. Which version of CM are you trying to flash? And where you downloaded it from?
---------- Post added at 04:15 AM ---------- Previous post was at 04:06 AM ----------
Ok we will come to flashing ROMs later lets first get you to boot your phone so that you can use it and not be scared. Whatever you have messed up, flashing the phone with flashtool and official FTF would make it normal. I hope you know how to do it. Google around and you can find flashtool. Get it installed to you PC then go here http://forum.xda-developers.com/showthread.php?t=1330314 and download the ftf file and flash it using flashtool. Then your phone will be back up and running. Once its done. Come back here and tell me. Ill help you with flashing ROMs.
@ arpith.fbi
Yes i flashed a boot.img that came with the CM9 zip file, but that is all.
@ gnirujan
I am flashing CM9, and i got it from the downlaods section of the CM website.
I have also downlaoded flashtool but im not sure how to flash the FTF file. By the way, that file is for LT18i, and i have a LT18a. Would it matter?
Thanks for the replies
also gnirujan,
I checked that FTF file, and its 370mb. Is it the full firmware? If it is, i will flash it but if there is a way to continue with the cyanogen flashing, i would love to avoid downloading that ftf.
P.S. LANKAN PRIDEEE!!!!
ok first tell me during startup do u see boot logo? or any logo?
When i boot up, all i see is a lit up black screen with nothing on it
Flash the attached boot.img which is the FXP CM9 kernel from this site, then install the zip.
Ok, thanks, i will try it.
That didn't work either , did the same thing as the other.
I have managed to flash a stock ics ftf file, and i have finally rooted my phone. Now i want to try Rom manager instead to install, but when i go to install Clockwork mod recovery, it says stuff about my phone not currently being officially supported.
Any ideas?
xperiaarcsnoob said:
I have managed to flash a stock ics ftf file, and i have finally rooted my phone. Now i want to try Rom manager instead to install, but when i go to install Clockwork mod recovery, it says stuff about my phone not currently being officially supported.
Any ideas?
Click to expand...
Click to collapse
Look in dev section for arc and look for post by pvyparts, his thread is all about cwm recovery check to see if your phone Is listed if not ask there.
Sent from my LT15i using xda premium
xperiaarcsnoob said:
That didn't work either , did the same thing as the other.
Click to expand...
Click to collapse
Your boot loader is unlocked right? You wanna install Cynogenmod 9 right? You dont install the one from cyanogenmod site. It has a non working kernel. In XDA there are these guys called FXP (Free Xperia Project) they are the ones responsible for CM for all Xperia devices. So do this. Go tho this thread http://forum.xda-developers.com/showthread.php?t=1356685 download the CM9 RC 1 FXP 128. Its a 130MB file. Download it and now extract it and flash that boot.img to your Arc S using fastboot. Now start your phone and you should see FXP boot screen then from there go to recovery and try flashing the CM9 RC 1 you have. That should work. I suggest if you can replace the CM9 you have in your memory cad with the FXP128 zip its better so that you can flash the latest FXP128 CM 9, which has lots of improvements.
Edit: Arc S and Arc same ZIP its called anzu
---------- Post added at 06:11 AM ---------- Previous post was at 05:53 AM ----------
xperiaarcsnoob said:
I have managed to flash a stock ics ftf file, and i have finally rooted my phone. Now i want to try Rom manager instead to install, but when i go to install Clockwork mod recovery, it says stuff about my phone not currently being officially supported.
Any ideas?
Click to expand...
Click to collapse
Allright as far as i know there are two ways you can get CMW installed on your phone. 1. Download CWM auto installer from play store and install CMW through that. 2. Flash a kernel which has CWM pre installed.
In this link http://forum.xda-developers.com/showthread.php?t=1680793 you can find stock sony kernel with CWM. You download it and flash it using fastboot. That will get you CWM. hope i helped you.
Thanks gnirujan,
I managed to find a FXP127 kernel yesterday and it worked. But this would be even better. I heard that FXP128 is much faster as well, but I've already set up my whole system and dont want to reset it now . Any way of updating it without wiping?
Thanks again !!!
xperiaarcsnoob said:
Thanks gnirujan,
I managed to find a FXP127 kernel yesterday and it worked. But this would be even better. I heard that FXP128 is much faster as well, but I've already set up my whole system and dont want to reset it now . Any way of updating it without wiping?
Thanks again !!!
Click to expand...
Click to collapse
I believe you can try flashing on top of your existing system. I personally have never tried it. But i think it is possible. I would recommend you to flash FXP 128. The improvements are very very visible. More fast and smooth.
gnirujan said:
I believe you can try flashing on top of your existing system. I personally have never tried it. But i think it is possible. I would recommend you to flash FXP 128. The improvements are very very visible. More fast and smooth.
Click to expand...
Click to collapse
Could anyone check to see if this is true
yes you can update it without wiping anything..but i recommend atleast wiping cache
arpith.fbi said:
yes you can update it without wiping anything..but i recommend atleast wiping cache
Click to expand...
Click to collapse
Will wiping cache delete any system settings or things like homescreen setup?
xperiaarcsnoob said:
Will wiping cache delete any system settings or things like homescreen setup?
Click to expand...
Click to collapse
nope...everything will be the way they were..nothing will change
Thank you very much arpith
hi..
i have a stock rooted and bloated xplay (not much time to fiddle) w/c i bought a year ago.. so i was thinking of changing roms and i plan on using the phone for gaming.. i have read some thread about pros/cons of custom and stock-based. others say that the stock rom is still the best for gaming (debloated of course).. so my question is..
should i go for a custom rom..? or stick with stock..?
if i'll stick with stock.., what's the best baseband(?) ..? currently mine's on .42...
what are the apps w/c are safe to delete..?
as for overclocking.., what is the best kernel that you'd recommend..?
thanks...
Xperia NXT lite with doomkernel
i was looking into that actually...
but some cons have given me second thoughts.. like wifi issues and unsupported touchpads (other roms).. that's why i'm asking about stocks..
this will also be my first time flashing custom roms.. kinda scary.. wehehehe...
qtjecs said:
i was looking into that actually...
but some cons have given me second thoughts.. like wifi issues and unsupported touchpads (other roms).. that's why i'm asking about stocks..
this will also be my first time flashing custom roms.. kinda scary.. wehehehe...
Click to expand...
Click to collapse
I think you should stick with the stock. This is the most.stable & supports full touchpad.
Custom roms are not as stable as stock...
I think you can just use v6 supercharger or supremacy script to make your rom fast...
[ you have to do it manually with smanager]
Press thanks if I helped..
Sent from my ST18i
thanks.. maybe i'll try them both...
i just want to ask for the list of bloatwares.. : )
thanks
First of all, you have to give MORE info about the phone: locked/unlocked bootloader, phone model.....
I advice you to get a stock-based rom, instead of sticking with the stock one, because those are inproved with some tweaks that cannot be flashed on your current stock, and have built-in apps and are already debloated.
If this is your first rom flash, just follow this steps:
BEFORE DOING ANYTHING, get the stock firmware that fits your region and stock android version if you want to go back from here or anywhere else
- root with any method, I recommend SuperOneClick
- install ClockWorkMod via RecoverX
- install TitaniumBackup from the market, and backup all user apps you want have in your new rom (be careful, some roms and kernels doesn't go well with backup restoration. Check the rom's thread for backup issues)
- reboot into CWM recovery and do a nandroid backup. It will save everything and you can restore your phone to its initial state, to the point you can not tell if it has had any changes
- flash the rom following the instructions given by rom builder
- flash any addons you want after rebooting at least one time, every addon separately (1 reboot after every addon)
- if you want better performance, get supercharger v6 or supremacy script as said before
Now, the stock firmware you got at first is to repair your phone if a nandroid backup restore doesn't do it.
If youwant to go back to stock, just restore the nandroid backup. If you want to take it to the carrier to fix it for whaterever reason, you also have to unroot and delete any app that uses root permissions, like TitaniumBackup. Then, when you see your Play is exactly as it was before doing anything of this, you can take it there safely
And finally, the best baseband is -36 cause it has the more balanced stats between signal reception on gsm/wifi and battery consumption, but some roms use -64. If you're adviced to flash a stock firmware before the custom rom flashing process, thats for installing the needed baseband and some other components. Happy flashing!!!!
---------- Post added at 04:02 AM ---------- Previous post was at 03:37 AM ----------
qtjecs said:
as for overclocking.., what is the best kernel that you'd recommend..?
thanks...
Click to expand...
Click to collapse
All custom kernels support overclock and all are good at it. Just flash the kernel according to your rom cook's advice
And if you were wondering, custom roms doesn't have any problems/bugs if they are finished. You should expect bugs if there is only the first or second release of that rom, but if it's finished you'll be fine by following the steps exactly as directed.
You can try The JokaWild ROM 'S.B .69 Tweaked ROM' FINAL (v3) and DiXperia 2 'Everlasting' | Performance. Stability. Experience. if you want a stable, fast rom. Those have given me good results, but if you want to know which is the best rom you have to try them all cause they don't run exactly they same on all phones, even if it's the same model. Maybe NXT or Aurora rom could be better for you....
Please click "thanks" button if I helped
While you're dispensing advice, may I ask which upgraded kernel is best to use with R800i_4.0.2.A.0.62_(1253-4437)? That's what I have on my device.
Is there any benefit to actually installing cwm with RecoveryX as opposed to just loading it with fastboot when needed? That is, will I be more likely able to launch it in a crisis if it is installed on the device?
drinkypoo said:
While you're dispensing advice, may I ask which upgraded kernel is best to use with R800i_4.0.2.A.0.62_(1253-4437)? That's what I have on my device.
Is there any benefit to actually installing cwm with RecoveryX as opposed to just loading it with fastboot when needed? That is, will I be more likely able to launch it in a crisis if it is installed on the device?
Click to expand...
Click to collapse
RecoverX is the easiest way to get CWM. Think about it as a quick 3-step process that you will do only one time. You don't lose anything
Additionally, I don't know what process are you talking about, since flashing a clockworkmod.img, installing the CWM app from the market and RecoverX have permanent effects all of them. The only exception is when you change kernel and it has a built-in recovery, you get the kernel's recovery instead of the original one. I recommend RecoverX because it supports the widest range of phone models and firmwares (I have an r800a, but it was not listed as a supported device in the CWM app, so...)
And again, it's always better to have a custom stock-based rom than just the 4.0.2.A.0.62 stock one
julian280 said:
Additionally, I don't know what process are you talking about, since flashing a clockworkmod.img, installing the CWM app from the market and RecoverX have permanent effects all of them. The only exception is when you change kernel and it has a built-in recovery, you get the kernel's recovery instead of the original one.
Click to expand...
Click to collapse
fastboot boot boot.img (with a cwrecovery boot) appears to get you straight into cwrecovery without installing anything, as opposed to fastboot flash boot boot.img
julian280 said:
And again, it's always better to have a custom stock-based rom than just the 4.0.2.A.0.62 stock one
Click to expand...
Click to collapse
Well, I took your advice, and I installed doomkernel and jokawild
http://forum.xda-developers.com/showthread.php?t=1176502
http://forum.xda-developers.com/showthread.php?t=1532883
I only wish I had known sooner what was in the addon packages for jokawild, that could be documented a lot better. basically that's where all the apps went.
now I will probably reflash and do it right
no cifs in doomkernel
JIC anyone is wondering
CIFS and NFS were taken out and then he moved on to the ray or something
drinkypoo said:
Well, I took your advice, and I installed doomkernel and jokawild
http://forum.xda-developers.com/showthread.php?t=1176502
http://forum.xda-developers.com/showthread.php?t=1532883
I only wish I had known sooner what was in the addon packages for jokawild, that could be documented a lot better. basically that's where all the apps went.
now I will probably reflash and do it right
Click to expand...
Click to collapse
So, have you had a happy flashing? I hope so.....
About the addons you don't have to reflash everyting to install them, just flash one by one, separated by a reboot (you can reboot directly into CWM instead of loading to homescreen everytime, that woluld take ages to flash all of them ).
If you were wondering about root, it's not necesary to flash the root addon since doomkernel is already prerooted, so you get superuser since the first boot with it
I have had a pretty happy flashing, in that nothing went horribly wrong
I do think I more or less know what I'm doing now. Heh heh.
As you can see from my sig I am now running lupus v6 and it's been very stable, smooth, etc. And I added the cifs and ntfs modules. I didn't reboot between everything which is probably why I had to load the wifi modules over again, so I'm very glad they were provided. But everything is working great now, thanks.
drinkypoo said:
JIC anyone is wondering
CIFS and NFS were taken out and then he moved on to the ray or something
Click to expand...
Click to collapse
I don't know you, but I can access my pc files from my Play with "ES file explorer" without even installing CIFSmanager. The changelog in DK's thread says he removed it, but at least for me it works .
To access from the phone to pc you have to put the folder you want as a "shared folder" and give "total control" permissions to "all". For accessing from the pc to phone just do the same with the folder on your sdcard connected to pc and, go to tools/connect to network device and select that folder. Now you can view your files and do streaming by opening the folder on ES file explorer in LAN section and from "My PC", where it appears as a hard disk with drive letter
e.g. music on "Xperia PLAY R800a" (H:/)
Hope this helped. I'm on DooMKernel v14 with jokawild but this has worked on other ROMs
Please click "thanks" button if I helped
---------- Post added at 06:01 PM ---------- Previous post was at 05:42 PM ----------
drinkypoo said:
fastboot boot boot.img (with a cwrecovery boot) appears to get you straight into cwrecovery without installing anything, as opposed to fastboot flash boot boot.img
Click to expand...
Click to collapse
I rarely use command prompt to perform operation cause I prefer to use flashtool instead, and the only time I installed CWM was through RecoverX, so I haven't experienced the difference.....
Yeah I've used the smb built into ES but I prefer to use the smb functionality built into the Linux kernel to using libsmb, which is what's happening when you use es file explorer, or pretty much anything else with built in smb browsing. I also don't care for ES file explorer's interface. Of course, open manager doesn't have smb support...
I have figured out the mtp/msc stuff some time ago.
anyway, pretty much all the kernels have a recovery, some of them have too many recoverys in my opinion so it doesn't really matter. but if you use fastboot boot boot.img then it boots without installing. I don't know if this works for anything but recovery, like if you could boot a kernel this way, probably not. I like command-line stuff. I do use flashtool's gui for ftfs though, of course.
a little off topic..
what should be the sequence..?
from stock..,
nandroid BU, flash pre-req stock ROM, unlock bootloader, flash custom ROM,..?
- or -
nandroid BU, unlock boot loader, flash pre-req, then custom ROM..?
will i lose root access when i unlock the boot loader.?
thanks...
qtjecs said:
will i lose root access when i unlock the boot loader.?thanks...
Click to expand...
Click to collapse
In my case I reflashed with a stock ftf right after unlocking, and then installed a kernel which rooted.
drinkypoo said:
In my case I reflashed with a stock ftf right after unlocking, and then installed a kernel which rooted.
Click to expand...
Click to collapse
..?
so it's nandroid BU, unlock boot, kernel, stock ROM then custom ROM..?
a few more question..
will i lose unlocked bootload when i flash rom..?
is kernel also included when you do a nandroid BU..?
sorry.. just a newbie...
thanks...
qtjecs said:
..?
so it's nandroid BU, unlock boot, kernel, stock ROM then custom ROM..?
a few more question..
will i lose unlocked bootload when i flash rom..?
is kernel also included when you do a nandroid BU..?
sorry.. just a newbie...
thanks...
Click to expand...
Click to collapse
you have the sequence right, I don't know if nandroid backs up the kernel. I would guess no, but I could be wrong, and hope I am.
you don't care anyway. you can reflash back to a stock kernel. just make very very sure you never flash a cdma to a gsm or a gsm to a cdma. a, at, i are all gsm... if you do that you need testpoint reflash as far as I know.
you should also do a titanium backup, that gets you all the apks on your system now, handy for restoring any games on your current rom that aren't on your new rom.
Well, you can unlock your downloader at any time, by IMEI method through Sony webpage or through alejandrissimo's testpoint method. It is permanent, so it doesn't matter if you change Rom or kernel, it will remain unlocked forever , and if for whatever reason you have to take your phone to carrier for warranty, it will appear locked for Sony (I already did it, and they didn't void my warranty)
Just follow the steps I gave you, it's not that complicated. You can flash first the Rom or first the kernel, it doesn't affect anything, except when you change android version (GB to ICS or something), then flash the kernel first and then the new Rom.
Flashing a rom doesn't change the kernel, so if you're on DoomKernel and "A" Rom, you can switch to "B" Rom and stick to DK, IF IT'S ON THE SAME ANDROID VERSION.
Also you can change kernel while keeping the same rom
And respecting to nandroid backup, it saves everything but kernel, baseband and some sections of internal memory that you should not worry about. That's why you're able to restore a backup with the same or other kernel without any worry
Sent from my R800a using xda app-developers app
Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?
AMKhatri said:
Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?
Click to expand...
Click to collapse
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
How do I get “root”?
If you are booted into a custom recovery (recoveries will be covered later), root is enabled by default. If you want root while booted into Android, you will need to place two files on your system partition: an “su” binary which grants root access, and a superuser app that manages that access. The two that are available are ChainsDD’s Superuser and Chainfire’s SuperSU. Usually these files are packaged up in a zip file that is flashable using a custom recovery, but they can be flashed manually using ADB. Both of these methods will be described below.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.
beekay201 said:
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.
Click to expand...
Click to collapse
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PSo you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872
AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
Mr., please, read the LINK i gave you! THIS ONE ->>>> http://forum.xda-developers.com/showthread.php?t=1812959
If you read it, you'll stop thinking you need to be doing anything at this point in FASTBOOT interface! Like mrgnex says, you need to be on a custom recovery to format /system. (Have you read the link yet? By now you should know that the /system partition and the /sdcard/ (aka userdata) are 2 different things!)
mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). (...) roms are a personal choice so there is no 'best' ROM. Just try out.
Click to expand...
Click to collapse
+1
For your reference, you can't erase /system in stock recovery.
AMKhatri said:
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872
Click to expand...
Click to collapse
Stop! THERE'S NO NEED FOR FASTBOOT HERE!
Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?
AMKhatri said:
Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?
Click to expand...
Click to collapse
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks! Now it's definitely clear!
I'll download CM10.1.2 tomorrow and will decide to install it once Stock JB 4.2.2 starts acting up again.
In the meantime I'll read on about kernels, please keep don't close this thread...yet.
clerk usdEuro
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)
AMKhatri said:
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)
Click to expand...
Click to collapse
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks...
I'll flash CM in a week or two, as I'm on a tight schedule currently, and I also wanna note down the average battery time I get out of 4.2.2
So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?
AMKhatri said:
So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?
Click to expand...
Click to collapse
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus
Pirateghost said:
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
What was I thinking...
I apologize guys... I guess I wasn't thinking straight as its past midnight here...
So just to clarify stuff so that I don't end up doing something wrong:
-> Head into Recovery Mode (with usb debugging enabled... connect usb cable to phone and pc)
-> Wipe System
-> Wipe Cache
-> Install from SD card (select .zip file)
right?
Also, I performed a backup of the applications I have via Titanium Backup, They'll work on 4.3 when I restore them right? or do you recommend downloading them from the play store again?
Sorry for being such a noob, and Thanks for your responses!
backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.
Pirateghost said:
backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.
Click to expand...
Click to collapse
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!
AMKhatri said:
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!
Click to expand...
Click to collapse
Seriously, how hard can it be for you people to waste 5, 5!!! minutes to browse the forums.
http://forum.xda-developers.com/showthread.php?t=2377318
Thanks!
According to a friend's recommendation I used Wugfresh Nexus Root Toolkit to Root, and surprisingly didn't lose any of my data!
Once again, Thanks for all the help everyone... You've all been quite helpful.
Guys i really need help, I'm using an xperia play and i had just unlocked the bootloader and then flashed a the trueancestors ics rom and the LuPuS_zeus_Stock-gB+iCsv7-full kernel. Now it turns out that i didnt like the rom so i put it back to stock, still with the lupus kernel. Everything was working however i wanted to have the doomkernel v14. So i flashed the doomkernel and it was working however the wifi had erroros so i changed back to the lupus kernel. Again everything was working fine now. I then found out how to fix the wifi problem on doomkernelv14 so refrlashed that kernel. Before i reflashed the kernel i deleted the trueancestors isc rom as i didnt like it so i thought it would be ok. After the flash i tried to reboot the device, and it was stuck on the bootloader for doomkernel, not in a bootloop just stuck at doomkernel bootloader. I tried to fix this by going to recovery (clockwork mod) and then did a factory reset, wiped the cache and data and the dalvik cache as i saw these online for instructions on how to fix this problem. Still i had the same problem, stuck at bootloader. So i tried somthing different and reinstalled the trueancestors ics rom, and tried to reboot the xperia play, again stuck at bootloader. Im sorry if this was a bit long but I AM LITTRALLY BEGGING FOR SOME HELP! Please make a suggestion as to how i can fix this ASAP. Can it be fixed?Thank you for you Advice it is very much aprecciated. Ive posted this somewhere else in which i couldnt find but i really need help on this, please can anyone help. :crying:
you shouldn't post a like or not like any developer handmake. try back to a stock..
Mushtaqs said:
Guys i really need help, I'm using an xperia play and i had just unlocked the bootloader and then flashed a the trueancestors ics rom and the LuPuS_zeus_Stock-gB+iCsv7-full kernel. Now it turns out that i didnt like the rom so i put it back to stock, still with the lupus kernel. Everything was working however i wanted to have the doomkernel v14. So i flashed the doomkernel and it was working however the wifi had erroros so i changed back to the lupus kernel. Again everything was working fine now. I then found out how to fix the wifi problem on doomkernelv14 so refrlashed that kernel. Before i reflashed the kernel i deleted the trueancestors isc rom as i didnt like it so i thought it would be ok. After the flash i tried to reboot the device, and it was stuck on the bootloader for doomkernel, not in a bootloop just stuck at doomkernel bootloader. I tried to fix this by going to recovery (clockwork mod) and then did a factory reset, wiped the cache and data and the dalvik cache as i saw these online for instructions on how to fix this problem. Still i had the same problem, stuck at bootloader. So i tried somthing different and reinstalled the trueancestors ics rom, and tried to reboot the xperia play, again stuck at bootloader. Im sorry if this was a bit long but I AM LITTRALLY BEGGING FOR SOME HELP! Please make a suggestion as to how i can fix this ASAP. Can it be fixed?Thank you for you Advice it is very much aprecciated. Ive posted this somewhere else in which i couldnt find but i really need help on this, please can anyone help. :crying:
Click to expand...
Click to collapse
When switching kernels with different partition layout you have to delete data and system partition in fastboot mode.
I'm lazy to type again so here is a link where it is explained already:
http://forum.xda-developers.com/showthread.php?t=1849536&page=100
You can prevent future problems by wiping data and system partittion from CWM and THEN flash new kernel that have different partittion layout
Bakisha said:
When switching kernels with different partition layout you have to delete data and system partition in fastboot mode.
I'm lazy to type again so here is a link where it is explained already:
http://forum.xda-developers.com/showthread.php?t=1849536&page=100
You can prevent future problems by wiping data and system partittion from CWM and THEN flash new kernel that have different partittion layout
Click to expand...
Click to collapse
I havent tried this yet,becuase i need my dad to allow flash tool to work (Parental controls ffs -.-") however i saw the thread and i saw this part saying enter these commands "fastboot erase userdata and fastboot erase system i undestand how to get the command thing open but how do u enter these in, and what i mean is do you just open the command thing and just paste these in or do u have to right click somthing open comand promt here and all the stuff then enter them? Also these steps u listed, everything is fine its just my lack off knowladge for some of these things which i do apologize for
" Fully working steps, that is 100% working:
1.flash ftf with unlocked vendor partition (.62 or .79)
2.flash lupus gb kernel
3.erase system and data from fastboot
4.enter recovery and flash your rom "
Where do you get the unlocked vender partition, and which one is better .62 or .79 and if u could send me a link as your helping me i think ur choice of links for this is more reliable than mine, and again this is greatly appreciated.
" Fully working steps, that is 100% working:
1.flash ftf with unlocked vendor partition (.62 or .79)
2.flash lupus gb kernel
Download file name R800i_4.0.2.A.0.79.ftf from Xperia Play Index - ROM'S, FIRMWARE, KERNEL'S, GUIDE'S, THEMES, MOD'S second post have firmware files
Guide how to use flashtool you can find at [GUIDE][18th Dec][4Noobs] Flashing A FTF File Using Flashtool
Flashing .79 or .62 firmware is necessary if you are planning to use lupus gb or icd/gb kernel - and you only need to do it once.
Flashing kernel is same, but when pressed on lighting icon, choose "fastboot"
3.erase system and data from fastboot
Ok, i made a zip for you. Download it from attachment, unpack to anywhere you like and double-click file named "start". Power off phone, press search and while keeping it pressed, plug in usb. I don't think you need admin rights for that, but:
MAKE SURE YOU HAVE ROM PLACED ON YOUR SD CARD! Just in case, because that program will erase everything from your phone.
You should be able to enter recovery and/or flash your rom/restore your backup.
4.enter recovery and flash your rom "
Also, read some sticky threads, they are there for a reason
Again im really sorry to bother you with this, but what if i dont want to flash the rom, becuase i didnt like it in the first place so i went back to stock, however this method of returning to stock was to flash the R800i_4.0.2.A.0.62_(1253-4437).ftf file. Now what it did was return it to stock rom (AFTER i tried the rom i didnt like) and unrooted the phone, i dont know if it returns the phone to stock firmware, and if the method of the system data wipe thing with the command prompt deleted everything, what can i flash? Little more explaination as to why im asking. Before this boot stuck thing hapenned i had used that same ftf file to return it to stock and unrooted. I re-rooted the phone and then flashed the lupus kernel. Everything was fine. I wanted to flash the doomkernel because like a dum nut i wanted to show off that i could overclock to 2ghz ( if i wanted to) as if alrdy stated before and did so. I think you can only flash zip files from your SD card so the ftf file wont be able to be flashed while on the device. So what do i flash? Should i just flash the rom i dont like and try return it to stock, then flash the ftf .79 firmware again after re-rooting the phone, then flash the doomkernelv14. In short i want to stay with the normal gingerbread 2.3.4 with doomkernelv14. Again i havent tried this yet and also sorry for these long rambly posts, i just want to give you as much info as possible in order for you to help me. Thank you so much for your solution btw much appriciated.:good:
And almost forgot i also want it back to rooted but i can do that myself, i just thought i'd specifiy it just incase its worth anything.
Try this
http://forum.xda-developers.com/showthread.php?t=2408688
Sent from my R800i using xda app-developers app
Bakisha said:
Try this
http://forum.xda-developers.com/showthread.php?t=2408688
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Alright ive had the chance to try it out and i just got started on the firmware flash, problem is that its stuck at 16/033/2013 14:33:15
- INFO - Preparing files for flashing
16/033/2013 14:33:53 - INFO - Please connect your device into flashmode.
16/033/2013 14:33:54 - INFO - Opening device for R/W
16/033/2013 14:33:54 - INFO - Reading device information (stuck here)
Any sugessions to what i should do?
Alright i fixed the firmware flash problem and have made it all the way to the the part where you flash your custom rom and the phone should magicly work again. Ive got past the doomlord booting screen, thats good, now im stuck at a black screen, any ideas on whats going on?
K so i fixed all the above problems, by using a different kernel, and repeating all the previous steps, THE XPERIA PLAY IS BACK DUDE THANK YOU( hit the thanks button like 100 times).
Mushtaqs said:
K so i fixed all the above problems, by using a different kernel, and repeating all the previous steps, THE XPERIA PLAY IS BACK DUDE THANK YOU( hit the thanks button like 100 times).
Click to expand...
Click to collapse
Glad to helpfull
Remember, kernel must much rom. Gb stock kernel for gb sony based rom, you'll get stuck agan in kernel logo if if you flash kernel that don't match rom/firmware
Just read in kernel thread for info on wich roms it works
Sent from my R800i using xda app-developers app
Everythings fine at the moment and i dont want to make any more dumb mistakes so im just going to ask if wiping the data and system partitions in CWM still deleted everything. I just recently got all of my apps back and all that good stuff, i just want to know if they will get erased if i do this. My deepest appologies for bothering you with something so minor and selfish.
Sorry another selfish request (Damit) but when ever i flash the doomkernel v14 my wifi gets error, i was wondering if u knew how to fix this, if u dont and have the free time or feel like it, direct me to somone who does?
Mushtaqs said:
Everythings fine at the moment and i dont want to make any more dumb mistakes so im just going to ask if wiping the data and system partitions in CWM still deleted everything. I just recently got all of my apps back and all that good stuff, i just want to know if they will get erased if i do this. My deepest appologies for bothering you with something so minor and selfish.
Click to expand...
Click to collapse
Mushtaqs said:
Sorry another selfish request (Damit) but when ever i flash the doomkernel v14 my wifi gets error, i was wondering if u knew how to fix this, if u dont and have the free time or feel like it, direct me to somone who does?
Click to expand...
Click to collapse
Yes, if you wipe data and system then EVERYTHING is deleted. All your apps (data) and even android OS itself (system). You'll have to either flash new rom or restore backup after wiping system
Doomkernel need wifi modules to be installed from CWM recovery to have working wifi
I'll attach it
Im wondering about my battery life, because it seems to be draining faster. Im using no frills cpu with the lupus kernel alowing me to overclock to 1.6 ghz. I set my higest on 1613 mhz and lowest on 249mhz using the smartassv2 governer. any idea to whats going on ?
ok...i screw up my xperia play... dunno what to do.
hi guys, been a noob after i fed up with my xperia x8 now i having a xperia play f or 2 years and try to install a custom kernel and roms but i end up brick my phone. it just stuck at logo "xperia free play". it still can enter cwm recovery mode but when i use the method press the arrow thing then plug in the usb cable to pc , it seems my pc did detect my phone but cant show up my memory card in 'my computer' window. The i try to use fastboot & flashtool both can detect my phone after plug in. Here is what i do before brick:
first thing i did on my phone was to upgrade the stock kernel 4.0.2.a.0.42, then i unlock the bootloader, root it, and start download the custom rom without download the requirement kernel. after that, i install CWM using fast boot, put the custom rom to sd card, wipe user data, bla bla bla, then install the custom rom, the next thing i see is the problem i talking about earlier. So i try to using the service update from SCE but it just say im using a modified kernel hence i unable recover it using that method. so, i try to use flash tool x10 (i cant get any working download it keep saying error 404 link, this is the best i have now) when i press the flash it come out red words with error usb ...the thing is my phone cant get detected by my computer.... What to do or it is over? (p/s : i download the flash tool & adb package winrar file & the custom rom i mention is close 2 perfection)
I know is a bit long but I really need help on my phone, i still have a x8 here from my mom and mine is xperia play brick for 3 days now i still cant find a way to solve it. PLEASE HELLLLLLLLLLPPPPPPPPPPPP. THANK YOU FOR THOSE RESPONSE~!
Bakisha said:
Glad to helpfull
Remember, kernel must much rom. Gb stock kernel for gb sony based rom, you'll get stuck agan in kernel logo if if you flash kernel that don't match rom/firmware
Just read in kernel thread for info on wich roms it works
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.
Mushtaqs said:
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.
Click to expand...
Click to collapse
For most part, you are doing it right, but, to solve problem with recovery, you should use "eraser" AFTER you change kernel
Sent from my R800i using xda app-developers app
---------- Post added at 01:23 PM ---------- Previous post was at 01:18 PM ----------
Mushtaqs said:
Im wondering about my battery life, because it seems to be draining faster. Im using no frills cpu with the lupus kernel alowing me to overclock to 1.6 ghz. I set my higest on 1613 mhz and lowest on 249mhz using the smartassv2 governer. any idea to whats going on ?
Click to expand...
Click to collapse
Naturaly, it will drain more battery BECAUSE it's overclocked.
Sent from my R800i using xda app-developers app
Mushtaqs said:
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.
Click to expand...
Click to collapse
I think you should repeat the fastboot process once again, so:
fastboot erase userdata
and fastboot erase system
then just flash the kernel you prefer.
I had exactly the same problem with my play bootlooping after flashing some kernels. and this solved the problem for me :victory:
sorry for my bad English, :crying:
Hello everyone,
I finally could flash my first custom kernel (LuPuS-GBv7-full), but now each time i turn on my phone, it boots into recovery mode. When the lupus bootscreen pops up, the phone vibrates twice, the blue light turns on, then off, then the phone goes into recovery. I have searched for a solution but none works. Please help me out with this one, i cant use my phone at all.
Thanks in advance
Did you wiped system and data partition from fastboot when you flashed lupus kernel? Iit is written in kernel thread with big red "important" word. Then flash your rom from recovery.
Also, did you flashed proper stock firmware first? .62 or. 79
You could always flash stock firmware with flashtool to get working phone
Sent from my R800i using xda app-developers app
Black home screen
Bakisha said:
Did you wiped system and data partition from fastboot when you flashed lupus kernel? Iit is written in kernel thread with big red "important" word. Then flash your rom from recovery.
Also, did you flashed proper stock firmware first? .62 or. 79
You could always flash stock firmware with flashtool to get working phone
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
First of all, thank you very much for your reply, it help me a lot and calmed me down in a moment of despair (noob here as you may have already guessed).
Didn't answer right away to try out the stuff you told me and learn some more before asking again.
What I did was this (acording to the thread of the rom i want to install http://forum.xda-developers.com/showthread.php?t=2219154):
- Flashed Lupus GB with flashtools
- Boot into recovery
- Wipe data and factory reset
- Wipe Dalvik cache
- Flash the rom (AtoMic GB 7.0 - PLAY r2) I could not flash the device patch and wifi modules as instructed because couldnt find them in the thread.
- Reboot
What I get now is the phone booting into the system, but there is only a black screen with the status bar showing the battery meter, a non functioning wifi icon and the clock. The notifications area works when i drag it down, also the volume with sound and power button. There is nothing else, no app drawer, no icons, nothing.
I even tried the previous steps first flashing this stock rom Xperia Play_3.0.1.B.0.285_AT&T (http://forum.xda-developers.com/showthread.php?t=1768599), to get the same results.
My phone is a R800at, if this matters.
I kindly ask again for help to get the rom working propperly.
Thanks to your advice I could get my phone working again with a stock rom, but I really, really want to get this working, I dont like the stock rom, like most people around here dont, I suppose.
Thanks again
You are doing things right, but black screen means launcher doesn't work, but it's ROM related problem. I can't help you there much because i never used that rom.
You should try other roms. You could download few of them, place on sdcard and test and see wich one suit your taste.
I can only help you with few tips in problems that you could might find:
-"flashing" patches or modules means flashing from recovery with "install from sd card" option. Some rom makers make versions for more then one phone, so they just copy/paste text in thread, and if you can't see patches for download, it means it is already patched in newer version.
- Doomlord kernel need flashing wifi modules and you can find them in doomlord kernel thread. It use stock partition layout (system 310MB, data 380MB) so it will work if your previous kernel was stock one.
-Lupus kernel have wifi modules integrated, so no need for flashing them. But it have different partition layout (system 280MB, data 640MB), so you need to delete (wipe) system and data partition from fastboot if your previous kernel used stock partition layout. Also, use. 62 or .79 firmware because only on that firmware is possible to have bigger data partition.
-Always make sure that you are using kernel that match rom you are trying to flash. Read in rom's thread for compatible kernel
Sent from my R800i using xda app-developers app
All set!
Thanks very much for the patience and everything, i think the trick was to install first the stock rom and then a kernel and rom compatible to use with this stock rom. Everything works perfect now, thanks again!