Develop Bugs

[q] helpp!? Stuck in clockworkmod recovery!

I know their is many threads already about this, but i cant seem to get the answer i need :/
when i boot my phone up it goes to the clockworkmod recovery menu, i can fully navigate it and all, but when i try to reboot the system or anything, it just goes straight back to the clockwork recovery menu :|
i am new to all this rooting and flashing roms stuff, so sorry if i sound dumb.
if their is a thread already answering my question then could you please link me..?
so what im really asking is how do i get back into my phone without it booting straight into clockworkmod recovery?..

I take you've flashed either Doomlords kernel or CM7 on your phone.
If it's the first you could flash the stock kernel. That would be done by simply extract kernel.sin from a ftf file, matching your build/FW number, with winrar/7z. Then boot and flash Doomlods kernel again or just start out with flashing Doomlords kernel once more.
If it's the latter you need to flash a stock rom. Dunno if there's some special steps to go from CM7 to stock, so check out the CM7 thread if this is the case. Or reinstall CM7 again to see if that helps. Flashing the CM7 kernel (only) probably could do it.
Odd that you're stuck in a CWM bootloop kind of thing, could be something with your volume rocker?
Regards Dousan...

thankyou for your reply dousan, much appreciated,
but i manage to figure out what i did wrong, turns out i accidentaly flashed the boot with the clockwork recovery boot instead of simply booting it, but i managed to fix it by flashing the cm7 boot as my boot, and now it works.
i am though looking to install cm7 and dont have a clue what im doing, could you please link me to an explanation thread or explain how i would do so? would be much appreciated. thanks man.

lol classic. You're not the first one that has falshed it instead of booting it
Anyway here's a link on how to:
http://forum.xda-developers.com/showthread.php?t=1128216
The how to is in post three and four. One is for GSM devices and the other is for CDMA devices.
Regards Dousan...

yeah seems like an easy mistake to make haha,
crap now that ive done it and its rebooted, all of the root applications are gone and most applications are crashing? i re-flashed the root mod and all but everything is still stuffing up. know how i could fix this because i cannot plug it into usb in order to put on cm7.. :/

I take you did it with a ftf file through flashtool? Was it the same FW build as you where on already? Did you tick wipe data before flashing?
If you're using flashtool i would do a reflash and tick 'wipe data' and then boot and take it from there with CM7. That should fix the fc'ing and when using flashtool the root will get wiped along with the rest of the phone.
Regards Dousan...

i wasn't using flashtool i was using fastboot, but ill take a look at flash tool and see if i can figure out whats going on, i want to get my phone back to stock without root, so then i know how to take it from there? how exactly would i do that with flash tool?
thanks for the help btw man im completely lost with this stuff haha

lyonz said:
i wasn't using flashtool i was using fastboot, but ill take a look at flash tool and see if i can figure out whats going on, i want to get my phone back to stock without root, so then i know how to take it from there? how exactly would i do that with flash tool?
thanks for the help btw man im completely lost with this stuff haha
Click to expand...
Click to collapse
As dousan said, you can flash a .tft file from flashtool, you will then have stock rom with no root

alright thanks boys you guys have been a great help
where would i get the tft file from?
last thing i ask from yous and then i will be out of your hair

lyonz said:
alright thanks boys you guys have been a great help
where would i get the tft file from?
last thing i ask from yous and then i will be out of your hair
Click to expand...
Click to collapse
They're posted in the dev section. The newest one is the .42. Grab the one posted by @Thomassafca
Regards Dousan...

thanks guys

[Q] Stuck on boot loop

I tried a search but didn't find much of any relevance to my Arc's problem.
My Arc was getting quite laggy so I decided to wipe and put a custom ROM on. I rooted, then unlocked the bootloader and managed to put on CWM using DoomLord's kernel. Everything fine up until here.
Then, mistakenly, I tried to put stable CM7 on without updating the stock ROM. I was still on 3.0 (2.3.3) something. Well, after that it got stuck in a boot loop with the SE and CM7 logos just coming up and restarting.
I then tried the Flashtool with a stock uptodate 4.0 something firmware. It flashed successfully, but it still was stuck in the loop, albeit now without the CM7 logo. I then tried the FTA unbricking tool for repairing the trim area but it still stayed in the boot loop.
What else can I do? Maybe there is a driver problem and that is why even after using Flashtool it still doesn't boot?
I would be very grateful if someone could help me on this.

You have to flash FXP's kernel and not DooMKernel.

But I also tried to flash a stock rom and that didn't work also.
EDIT: I flashed stock ROM again, still didn't boot. Installed DoomLord kernel and then arconium and it still doesn't boot.
EDIT 2: In CWM Recovery if I try to wipe data, it says this:
"E:format_volume: no MTD partition "userdata"
Has anyone got a fix for this?
It would be much appreciated.

can you charge your phone now?

Yep, I can charge the phone.

it means your kernel is still working....
then have it fully charged, then try to flashing again.
some tips:
1. always have latest flashtools
2. always have your phone fully charged b4 flashing.
3. proceed flashing carefully. if u miss one thing, then trouble come.
4. have cache and dalvik cache cleaned after flashing a kernel or Rom.
good luck mate...

gogo415 said:
it means your kernel is still working....
then have it fully charged, then try to flashing again.
some tips:
1. always have latest flashtools
2. always have your phone fully charged b4 flashing.
3. proceed flashing carefully. if u miss one thing, then trouble come.
4. have cache and dalvik cache cleaned after flashing a kernel or Rom.
good luck mate...
Click to expand...
Click to collapse
No luck with previous firmwares so I'll try to flash the latest .62 stock ROM and then see.
I'll let you know how I get on. Thanks!

Well lads, I managed to get it working by flashing the LT18i firmware (4.0.2.A.0.42_CE). Now I just need to go back to the drawing board and try to get CM7 on there.
Thanks for all the help! I'll update this thread with any experiences.

I've managed to do it. Installed latest .62 firmware, flashed CM7 kernel, flashed 7.2 ROM and then GAPPS.
I don't know why it took me two days to bring the phone back from the dead.

ZAnwar said:
I've managed to do it. Installed latest .62 firmware, flashed CM7 kernel, flashed 7.2 ROM and then GAPPS.
I don't know why it took me two days to bring the phone back from the dead.
Click to expand...
Click to collapse
hi, i came up with the same question:
E:format_volume: no MTD partition "userdata"
and my device is moto xt502
could you be so kind to give some details how you fix it
thank you very much

I am having the same problem too..please help! i flashed cm7 kernel n followed the instructions very carefully

ilamaan said:
I am having the same problem too..please help! i flashed cm7 kernel n followed the instructions very carefully
Click to expand...
Click to collapse
I followed the instructions too, though they are not so much noob-friendly (and neither are the people on the forums, it seems...). FXP is not responding (actually, they rarely respond to anything, they usually just post when new release is out), other people either don't know how to fix it, because they haven't experienced such issues, or they are just hostile because you're "a an annoying noob". Anyway... first time after trying to flash 64 baseband on 107 or 106 release, I got stuck on logo, then flashed back to .42 and it worked. Now, while updating to 108, I tried to flash the 64 libraries and patch, but it didn't work. Got back to .42, but this time nothing happened. Still stuck on logo. And when I try to restore data, it says:
E:format_volume: no MTD partition "userdata"
Error while formatting /data!
I think I'll go back to stock... love CM, but hate the poor/no help of the developers...

try these
flash new firmware using flashtool.
after flash.turn on your device.
enable uknown source n usb debug
then turn off your fon
flash baseband 64
then turn on your fon
put fxp108 updated-kang,gaps,baseband 64 libs on your memory card,
then turn off your fon
flash fxp kernel fastboot flash boot boot.img
after flash turn on your fon..go to recovery
formated factory reset,wipe cache,clear dalvik cache,wipe betry stats..
flash update cm7.update.zip,gaps.zip,baseband64libs.zip
reboot your fon..wait 2 or 3 mint..done

My thanks goes to you. I was hoping to avoid full wipe, but I don't care anymore, since I brought my phone back to life. I skipped these steps, though:
beranchoi said:
flash baseband 64
flash baseband64libs.zip
Click to expand...
Click to collapse
...because I went to check which baseband my phone was after flashing Global .62, and it said I was on -64, so it was no more necessary. For all of you having trouble with booting, follow the instructions given.
And now back to restoring all those apps

hey guys, can you post the link to that stock firmware, baseband and libs? maybe I've downloaded something wrong :/
btw. is there still that bug with a dark screen after locking phone?

lemon66 said:
hey guys, can you post the link to that stock firmware, baseband and libs? maybe I've downloaded something wrong :/
btw. is there still that bug with a dark screen after locking phone?
Click to expand...
Click to collapse
This is the link to the stock 4.0.2.A.0.42.. flash it using flashtool.. http://www.multiupload.com/W3B7BOKUXQ
Everything you need for flashing FXP is on his signature, including bb .64 (to be flashed with flashtool - doesn't erase a thing).. then download FXP (latest is 108) and inside the zip file you'll see boot.img, which contains the special kernel (to be flashed using fastboot, not flashtool).
Also there's no dark screen bug in the latest releases, certainly not in FXP 107 and 108, which I'm using now.

Please help!
beranchoi said:
try these
flash new firmware using flashtool.
after flash.turn on your device.
enable uknown source n usb debug
then turn off your fon
flash baseband 64
then turn on your fon
put fxp108 updated-kang,gaps,baseband 64 libs on your memory card,
then turn off your fon
flash fxp kernel fastboot flash boot boot.img
after flash turn on your fon..go to recovery
formated factory reset,wipe cache,clear dalvik cache,wipe betry stats..
flash update cm7.update.zip,gaps.zip,baseband64libs.zip
reboot your fon..wait 2 or 3 mint..done
Click to expand...
Click to collapse
Hey, this is my first post on here. I am new to android and just got an arc a few days ago. Even before i got it i was trying to figure out how to mod it. I am reasonably good at computers but a lot of the stuff i read on these forums is beyond me.
I have done my best to root and install CM7 on my arc but i have failed yet again.
I finally got it rooted and was all happy until when i tried to install CM7, all i can get to is the boot screen, but although the little android on the skateboard is very cool, i wish i could get it going!
So because I dont really understand the list of instructions you posted in this quote, i was hoping you could kind of translate into noob-speak. I still dont feel like i completely understand 'flashing'. In your instructions you say to "flash baseband 64" and that is the main point where I am stuck i think. Do you use a certain program (flashtool?) for this? or do it through a terminal window on the PC.
Also links to all the files mentioned would be awesome, its hard to find proper links with multiupload down and that kind of thing. Also with the rate this kind of tech evolves, things get outdated to quickly.
Please help! At the moment i have (i think) successfully returned my arc to the stock firmware using flashtool. Although i did this twice because i re-tried flashing CM7 and failed again. And the second time i couldnt seem to select LTI5i as the device to flash too, but LTI8i is what i used and it appears to have worked. So any help with that little conundrum would also be appreciated!
Cheers for any help given, I am so desperate to get this mod going as i have spent a solid 10+ hours trying already.

your bootloader unlock?right?
which kernel u use right now?

@tehknowitallnoob, I can lead you through the whole flashing process, if you want to, but only on Friday after around 9 pm GMT +1, since I don't have the time to do it earlier.
Sent from my LT15i (Xperia arc) on CM7

Try this:
Reflash back to stock ROM with a flashtool.
Then again flash the cm7 or try cm9
-cheers

Trying to install CM9 stable, stuck at boot logo.

My friend is currently running Arconium ICS on his Xperia, and now when I tried to install CM9 (Did full wipe > install CM > install gapps in CWM) it just gets stuck at the boot logo (SONY). After recovering the backup of Arconium in CWM it boots up fine again.
Since the boot logo didn't change, I'm thinking CM9 maybe didn't install a new kernel or something? Is there something I can do to make sure that CM9 fits as well as possible? If kernel switching is on the table I'd like to be able to do this from CWM.
Thank you!

bajsmumsaren said:
My friend is currently running Arconium ICS on his Xperia, and now when I tried to install CM9 (Did full wipe > install CM > install gapps in CWM) it just gets stuck at the boot logo (SONY). After recovering the backup of Arconium in CWM it boots up fine again.
Since the boot logo didn't change, I'm thinking CM9 maybe didn't install a new kernel or something? Is there something I can do to make sure that CM9 fits as well as possible? If kernel switching is on the table I'd like to be able to do this from CWM.
Thank you!
Click to expand...
Click to collapse
you must install the kernel "boot.img" through flashtool
is inside the zip file

krattos said:
you must install the kernel "boot.img" through flashtool
is inside the zip file
Click to expand...
Click to collapse
Do I have to do this via flashtool? No way to do it from inside CWM? Please excuse if this is a stupid question, I'm not still a 100 % sure what boot.img, recovery, kernel and all these are and how they fit together.

bajsmumsaren said:
Do I have to do this via flashtool? No way to do it from inside CWM? Please excuse if this is a stupid question, I'm not still a 100 % sure what boot.img, recovery, kernel and all these are and how they fit together.
Click to expand...
Click to collapse
Yes, through the FlashTool is safer.
For all your doubts see this link, is a little extended but very complete.
http://forum.xda-developers.com/showthread.php?t=1133650

bajsmumsaren said:
Do I have to do this via flashtool? No way to do it from inside CWM? Please excuse if this is a stupid question, I'm not still a 100 % sure what boot.img, recovery, kernel and all these are and how they fit together.
Click to expand...
Click to collapse
Boot.img is the kernel in a compiled file, which needs to be installed via fastboot. Flashtool includes fastboot aswell, so you can install the kernel(boot.img) using it.
Recovery is a certain 'program' used to install custom stuff, make full backups(Nandroid backup) and restore them, wipe/format partitions and some other stuff. Recovery can be included already inside the kernel, but there is also possibility to install it on /system partition for those who can't unlock bootloader and/or install custom kernel.
My recommendation - Don't do it if you don't understand anything. You should go and learn about the whole Android first, get yourself familiar with how to recover the phone(install stock firmware etc), what are the terms that we use, what is what etc, then come back. Else...you might get yourself a nice (temporary) brick and then you have another problem, how to get back the phone.

bajsmumsaren said:
My friend is currently running Arconium ICS on his Xperia, and now when I tried to install CM9 (Did full wipe > install CM > install gapps in CWM) it just gets stuck at the boot logo (SONY). After recovering the backup of Arconium in CWM it boots up fine again.
Since the boot logo didn't change, I'm thinking CM9 maybe didn't install a new kernel or something? Is there something I can do to make sure that CM9 fits as well as possible? If kernel switching is on the table I'd like to be able to do this from CWM.
Thank you!
Click to expand...
Click to collapse
Obviously you didnt flash the kernel..and before doing that u need to make sure if ur bootloader is unlocked..if it is unlocked then only you can proceed with flashing the kernel and then installing the ROM.

Same Here!!
but Nothin seems to b workin for me!! Ive Done everything as per da instructions!
I flashed the boot.img file which i unzipped from the cm9 nozomi.zip file!!
I formatted the data, the cache and the dalvik cache and then installed the cm9 and gapps files as well and then when i reboot my device from the recovery menu it just gets stuck at the boot screen of free xperia!!
(
pleasehelp!!

Assistere said:
Same Here!!
but Nothin seems to b workin for me!! Ive Done everything as per da instructions!
I flashed the boot.img file which i unzipped from the cm9 nozomi.zip file!!
I formatted the data, the cache and the dalvik cache and then installed the cm9 and gapps files as well and then when i reboot my device from the recovery menu it just gets stuck at the boot screen of free xperia!!
(
pleasehelp!!
Click to expand...
Click to collapse
Dude, nozomi is only for Xperia S device. You installed the wrong ROM!
Go check the supported devices list to find your device's codename.

Someguyfromhell said:
Dude, nozomi is only for Xperia S device. You installed the wrong ROM!
Go check the supported devices list to find your device's codename.
Click to expand...
Click to collapse
Dude mine is Xperia s is only!!
sorry i frgt to mention bout my phone earlier!!!

Assistere said:
Dude mine is Xperia s is only!!
sorry i frgt to mention bout my phone earlier!!!
Click to expand...
Click to collapse
Then you are at wrong forum.

Cyanogen Mod Nightlies for Ion

:highfive:Just saw this over on androidpolice, wanted.to give everyone a heads up.
http://www.androidpolice.com/2012/0...s-for-the-sony-xperia-ion-now-live-at-get-cm/

This needs an unlocked bootloader? Or would it be possible use this with the stock kernel?

424aca said:
i messaged them about it...waiting for reply
---------- Post added at 07:39 PM ---------- Previous post was at 07:38 PM ----------
question: if you do need an unlocked bootloader( i dont) and i flash...what is the worst that can happen?
Click to expand...
Click to collapse
Don't really know but I'd guess a brick. Probably have to go through the whole power drain flashmode process.
I was under the impression we could have roms, but with a locked bootloader we'd have to use the stock kernel. Now I don't know if a Rom has to be cooked in a way to allow for this and/or if the cm9 nightly will be packaged without a kernel. I'm thinking if the answers are "no" and "yes" we may have a shot.

424aca said:
i messaged them about it...waiting for reply
---------- Post added at 07:39 PM ---------- Previous post was at 07:38 PM ----------
question: if you do need an unlocked bootloader( i dont) and i flash...what is the worst that can happen?
Click to expand...
Click to collapse
Pretty sure it just won't flash. Just like if you tried to flash the lleaked ICS in the first couple pages of the stock firmware thread (not in the first post) with a locked bootloader. Just errored during flashing and nothing happened.
Sent from my Sony Xperia S

Spectre51 said:
Pretty sure it just won't flash. Just like if you tried to flash the lleaked ICS in the first couple pages of the stock firmware thread (not in the first post) with a locked bootloader. Just errored during flashing and nothing happened.
Sent from my Sony Xperia S
Click to expand...
Click to collapse
I have try this ROM...but when flashing it says Error Status 7

If I were you, I would not flash it cause it needs format system, but the current cwm is not able to format system. If you still try it, you may brick you phone.

siuming720 said:
If I were you, I would not flash it cause it needs format system, but the current cwm is not able to format system. If you still try it, you may brick you phone.
Click to expand...
Click to collapse
Lol it will not bricked ur phone......because only system will be format....if we change kernel sometimes will brick it....but for rom it will not...u still can use seus,flashtool or pcc to restore back

did anyone test this rom? Dose it work ?

faiisfaizal said:
Lol it will not bricked ur phone......because only system will be format....if we change kernel sometimes will brick it....but for rom it will not...u still can use seus,flashtool or pcc to restore back
Click to expand...
Click to collapse
Right, so a soft brick requiring a battery drain to shut off, then recharge to get into flasmode for restoring...a 24-36 hour process. Done it once before, would rather not do it again.
I think we need to figure out the system format issue and if we can flash this Rom on our stock kernel.

Raxtinhax said:
did anyone test this rom? Dose it work ?
Click to expand...
Click to collapse
I test it already with LT28h unlock bootloader..... but something went wrong when start to flash with CWM recovery,,with error status 7
jeriku said:
Right, so a soft brick requiring a battery drain to shut off, then recharge to get into flasmode for restoring...a 24-36 hour process. Done it once before, would rather not do it again.
I think we need to figure out the system format issue and if we can flash this Rom on our stock kernel.
Click to expand...
Click to collapse
Nah....u should not wait your battery drain just do nandroid backup using CWM recovery... if you got problem when flashing it just restore the backup back...

Great news. I'll be waiting for a more stable release. :good:

jeriku said:
Right, so a soft brick requiring a battery drain to shut off, then recharge to get into flasmode for restoring...a 24-36 hour process. Done it once before, would rather not do it again.
I think we need to figure out the system format issue and if we can flash this Rom on our stock kernel.
Click to expand...
Click to collapse
Tried already, without success.
On the xperia S forum, I found how to flash it.
1. Flash the Cm9 zip
2. Flash Gapps zip.
3. Clear cache & Dalvik Cache.
4. Flash the boot.img from the Cm9 zip using fastboot
fastboot flash boot boot.img.
I could do the first three steps, but could not complete the 4th step.
But phone does not go into Soft Brick. Just Go to flash mode and flash the firmware again and restore backup.

ganeshbiyer said:
Tried already, without success.
On the xperia S forum, I found how to flash it.
1. Flash the Cm9 zip
2. Flash Gapps zip.
3. Clear cache & Dalvik Cache.
4. Flash the boot.img from the Cm9 zip using fastboot
fastboot flash boot boot.img.
I could do the first three steps, but could not complete the 4th step.
But phone does not go into Soft Brick. Just Go to flash mode and flash the firmware again and restore backup.
Click to expand...
Click to collapse
As what i experience...i just flash thet zip through CWM recovery and it should done....but is say build.prop error...they need to modified it back.....but that build.prop match mine.... i dont know why it failed to flash

faiisfaizal said:
As what i experience...i just flash thet zip through CWM recovery and it should done....but is say build.prop error...they need to modified it back.....but that build.prop match mine.... i dont know why it failed to flash
Click to expand...
Click to collapse
I removed the assert line from the updater script and was able to flash it.
But never went beyond Cyanogen mod logo.

ganeshbiyer said:
I removed the assert line from the updater script and was able to flash it.
But never went beyond Cyanogen mod logo.
Click to expand...
Click to collapse
No wonder lol...hahah but u didnt pass to bootanimation right?

Yes ... No Luck ....
Try to follow this thread.
http://forum.xda-developers.com/showthread.php?t=1782771

ganeshbiyer said:
Yes ... No Luck ....
Try to follow this thread.
http://forum.xda-developers.com/showthread.php?t=1782771
Click to expand...
Click to collapse
I followed those thread just now....but i got bootloop....damn i guess they need to rebuild this rom properly....

ganeshbiyer said:
I removed the assert line from the updater script and was able to flash it.
But never went beyond Cyanogen mod logo.
Click to expand...
Click to collapse
have you tried to go on CWM recovery flash the zip file, fix permissions?
yesterday I was having some hard time with flashing a CM10 on a SG2 and the only solution to have it without any problem was to fix permissions after flashing the ROM.

From my understanding, with my experiences with my old x10, you need the ability to flash the fxp kernel. Since we don't have a way to bypass the stock kernel yet, we probably can't use this on a locked bl.
Sent from my LT28at using xda premium

dizarmstrong said:
From my understanding, with my experiences with my old x10, you need the ability to flash the fxp kernel. Since we don't have a way to bypass the stock kernel yet, we probably can't use this on a locked bl.
Sent from my LT28at using xda premium
Click to expand...
Click to collapse
That what im thinking when this rom is not working.....i think its really need custom kernel.....i unlock my bootloader but no custom kernel to be flash

[q] my xperia play is stuck on bootloader after flashing kernels

Guys i really need help, I'm using an xperia play and i had just unlocked the bootloader and then flashed a the trueancestors ics rom and the LuPuS_zeus_Stock-gB+iCsv7-full kernel. Now it turns out that i didnt like the rom so i put it back to stock, still with the lupus kernel. Everything was working however i wanted to have the doomkernel v14. So i flashed the doomkernel and it was working however the wifi had erroros so i changed back to the lupus kernel. Again everything was working fine now. I then found out how to fix the wifi problem on doomkernelv14 so refrlashed that kernel. Before i reflashed the kernel i deleted the trueancestors isc rom as i didnt like it so i thought it would be ok. After the flash i tried to reboot the device, and it was stuck on the bootloader for doomkernel, not in a bootloop just stuck at doomkernel bootloader. I tried to fix this by going to recovery (clockwork mod) and then did a factory reset, wiped the cache and data and the dalvik cache as i saw these online for instructions on how to fix this problem. Still i had the same problem, stuck at bootloader. So i tried somthing different and reinstalled the trueancestors ics rom, and tried to reboot the xperia play, again stuck at bootloader. Im sorry if this was a bit long but I AM LITTRALLY BEGGING FOR SOME HELP! Please make a suggestion as to how i can fix this ASAP. Can it be fixed?Thank you for you Advice it is very much aprecciated. Ive posted this somewhere else in which i couldnt find but i really need help on this, please can anyone help. :crying:

you shouldn't post a like or not like any developer handmake. try back to a stock..

Mushtaqs said:
Guys i really need help, I'm using an xperia play and i had just unlocked the bootloader and then flashed a the trueancestors ics rom and the LuPuS_zeus_Stock-gB+iCsv7-full kernel. Now it turns out that i didnt like the rom so i put it back to stock, still with the lupus kernel. Everything was working however i wanted to have the doomkernel v14. So i flashed the doomkernel and it was working however the wifi had erroros so i changed back to the lupus kernel. Again everything was working fine now. I then found out how to fix the wifi problem on doomkernelv14 so refrlashed that kernel. Before i reflashed the kernel i deleted the trueancestors isc rom as i didnt like it so i thought it would be ok. After the flash i tried to reboot the device, and it was stuck on the bootloader for doomkernel, not in a bootloop just stuck at doomkernel bootloader. I tried to fix this by going to recovery (clockwork mod) and then did a factory reset, wiped the cache and data and the dalvik cache as i saw these online for instructions on how to fix this problem. Still i had the same problem, stuck at bootloader. So i tried somthing different and reinstalled the trueancestors ics rom, and tried to reboot the xperia play, again stuck at bootloader. Im sorry if this was a bit long but I AM LITTRALLY BEGGING FOR SOME HELP! Please make a suggestion as to how i can fix this ASAP. Can it be fixed?Thank you for you Advice it is very much aprecciated. Ive posted this somewhere else in which i couldnt find but i really need help on this, please can anyone help. :crying:
Click to expand...
Click to collapse
When switching kernels with different partition layout you have to delete data and system partition in fastboot mode.
I'm lazy to type again so here is a link where it is explained already:
http://forum.xda-developers.com/showthread.php?t=1849536&page=100
You can prevent future problems by wiping data and system partittion from CWM and THEN flash new kernel that have different partittion layout

Bakisha said:
When switching kernels with different partition layout you have to delete data and system partition in fastboot mode.
I'm lazy to type again so here is a link where it is explained already:
http://forum.xda-developers.com/showthread.php?t=1849536&page=100
You can prevent future problems by wiping data and system partittion from CWM and THEN flash new kernel that have different partittion layout
Click to expand...
Click to collapse
I havent tried this yet,becuase i need my dad to allow flash tool to work (Parental controls ffs -.-") however i saw the thread and i saw this part saying enter these commands "fastboot erase userdata and fastboot erase system i undestand how to get the command thing open but how do u enter these in, and what i mean is do you just open the command thing and just paste these in or do u have to right click somthing open comand promt here and all the stuff then enter them? Also these steps u listed, everything is fine its just my lack off knowladge for some of these things which i do apologize for
" Fully working steps, that is 100% working:
1.flash ftf with unlocked vendor partition (.62 or .79)
2.flash lupus gb kernel
3.erase system and data from fastboot
4.enter recovery and flash your rom "
Where do you get the unlocked vender partition, and which one is better .62 or .79 and if u could send me a link as your helping me i think ur choice of links for this is more reliable than mine, and again this is greatly appreciated.

" Fully working steps, that is 100% working:
1.flash ftf with unlocked vendor partition (.62 or .79)
2.flash lupus gb kernel
Download file name R800i_4.0.2.A.0.79.ftf from Xperia Play Index - ROM'S, FIRMWARE, KERNEL'S, GUIDE'S, THEMES, MOD'S second post have firmware files
Guide how to use flashtool you can find at [GUIDE][18th Dec][4Noobs] Flashing A FTF File Using Flashtool
Flashing .79 or .62 firmware is necessary if you are planning to use lupus gb or icd/gb kernel - and you only need to do it once.
Flashing kernel is same, but when pressed on lighting icon, choose "fastboot"
3.erase system and data from fastboot
Ok, i made a zip for you. Download it from attachment, unpack to anywhere you like and double-click file named "start". Power off phone, press search and while keeping it pressed, plug in usb. I don't think you need admin rights for that, but:
MAKE SURE YOU HAVE ROM PLACED ON YOUR SD CARD! Just in case, because that program will erase everything from your phone.
You should be able to enter recovery and/or flash your rom/restore your backup.
4.enter recovery and flash your rom "
Also, read some sticky threads, they are there for a reason

Again im really sorry to bother you with this, but what if i dont want to flash the rom, becuase i didnt like it in the first place so i went back to stock, however this method of returning to stock was to flash the R800i_4.0.2.A.0.62_(1253-4437).ftf file. Now what it did was return it to stock rom (AFTER i tried the rom i didnt like) and unrooted the phone, i dont know if it returns the phone to stock firmware, and if the method of the system data wipe thing with the command prompt deleted everything, what can i flash? Little more explaination as to why im asking. Before this boot stuck thing hapenned i had used that same ftf file to return it to stock and unrooted. I re-rooted the phone and then flashed the lupus kernel. Everything was fine. I wanted to flash the doomkernel because like a dum nut i wanted to show off that i could overclock to 2ghz ( if i wanted to) as if alrdy stated before and did so. I think you can only flash zip files from your SD card so the ftf file wont be able to be flashed while on the device. So what do i flash? Should i just flash the rom i dont like and try return it to stock, then flash the ftf .79 firmware again after re-rooting the phone, then flash the doomkernelv14. In short i want to stay with the normal gingerbread 2.3.4 with doomkernelv14. Again i havent tried this yet and also sorry for these long rambly posts, i just want to give you as much info as possible in order for you to help me. Thank you so much for your solution btw much appriciated.:good:

And almost forgot i also want it back to rooted but i can do that myself, i just thought i'd specifiy it just incase its worth anything.

Try this
http://forum.xda-developers.com/showthread.php?t=2408688
Sent from my R800i using xda app-developers app

Bakisha said:
Try this
http://forum.xda-developers.com/showthread.php?t=2408688
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Alright ive had the chance to try it out and i just got started on the firmware flash, problem is that its stuck at 16/033/2013 14:33:15
- INFO - Preparing files for flashing
16/033/2013 14:33:53 - INFO - Please connect your device into flashmode.
16/033/2013 14:33:54 - INFO - Opening device for R/W
16/033/2013 14:33:54 - INFO - Reading device information (stuck here)
Any sugessions to what i should do?

Alright i fixed the firmware flash problem and have made it all the way to the the part where you flash your custom rom and the phone should magicly work again. Ive got past the doomlord booting screen, thats good, now im stuck at a black screen, any ideas on whats going on?

K so i fixed all the above problems, by using a different kernel, and repeating all the previous steps, THE XPERIA PLAY IS BACK DUDE THANK YOU( hit the thanks button like 100 times).

Mushtaqs said:
K so i fixed all the above problems, by using a different kernel, and repeating all the previous steps, THE XPERIA PLAY IS BACK DUDE THANK YOU( hit the thanks button like 100 times).
Click to expand...
Click to collapse
Glad to helpfull
Remember, kernel must much rom. Gb stock kernel for gb sony based rom, you'll get stuck agan in kernel logo if if you flash kernel that don't match rom/firmware
Just read in kernel thread for info on wich roms it works
Sent from my R800i using xda app-developers app

Everythings fine at the moment and i dont want to make any more dumb mistakes so im just going to ask if wiping the data and system partitions in CWM still deleted everything. I just recently got all of my apps back and all that good stuff, i just want to know if they will get erased if i do this. My deepest appologies for bothering you with something so minor and selfish.

Sorry another selfish request (Damit) but when ever i flash the doomkernel v14 my wifi gets error, i was wondering if u knew how to fix this, if u dont and have the free time or feel like it, direct me to somone who does?

Mushtaqs said:
Everythings fine at the moment and i dont want to make any more dumb mistakes so im just going to ask if wiping the data and system partitions in CWM still deleted everything. I just recently got all of my apps back and all that good stuff, i just want to know if they will get erased if i do this. My deepest appologies for bothering you with something so minor and selfish.
Click to expand...
Click to collapse
Mushtaqs said:
Sorry another selfish request (Damit) but when ever i flash the doomkernel v14 my wifi gets error, i was wondering if u knew how to fix this, if u dont and have the free time or feel like it, direct me to somone who does?
Click to expand...
Click to collapse
Yes, if you wipe data and system then EVERYTHING is deleted. All your apps (data) and even android OS itself (system). You'll have to either flash new rom or restore backup after wiping system
Doomkernel need wifi modules to be installed from CWM recovery to have working wifi
I'll attach it

Im wondering about my battery life, because it seems to be draining faster. Im using no frills cpu with the lupus kernel alowing me to overclock to 1.6 ghz. I set my higest on 1613 mhz and lowest on 249mhz using the smartassv2 governer. any idea to whats going on ?

ok...i screw up my xperia play... dunno what to do.
hi guys, been a noob after i fed up with my xperia x8 now i having a xperia play f or 2 years and try to install a custom kernel and roms but i end up brick my phone. it just stuck at logo "xperia free play". it still can enter cwm recovery mode but when i use the method press the arrow thing then plug in the usb cable to pc , it seems my pc did detect my phone but cant show up my memory card in 'my computer' window. The i try to use fastboot & flashtool both can detect my phone after plug in. Here is what i do before brick:
first thing i did on my phone was to upgrade the stock kernel 4.0.2.a.0.42, then i unlock the bootloader, root it, and start download the custom rom without download the requirement kernel. after that, i install CWM using fast boot, put the custom rom to sd card, wipe user data, bla bla bla, then install the custom rom, the next thing i see is the problem i talking about earlier. So i try to using the service update from SCE but it just say im using a modified kernel hence i unable recover it using that method. so, i try to use flash tool x10 (i cant get any working download it keep saying error 404 link, this is the best i have now) when i press the flash it come out red words with error usb ...the thing is my phone cant get detected by my computer.... What to do or it is over? (p/s : i download the flash tool & adb package winrar file & the custom rom i mention is close 2 perfection)
I know is a bit long but I really need help on my phone, i still have a x8 here from my mom and mine is xperia play brick for 3 days now i still cant find a way to solve it. PLEASE HELLLLLLLLLLPPPPPPPPPPPP. THANK YOU FOR THOSE RESPONSE~!

Bakisha said:
Glad to helpfull
Remember, kernel must much rom. Gb stock kernel for gb sony based rom, you'll get stuck agan in kernel logo if if you flash kernel that don't match rom/firmware
Just read in kernel thread for info on wich roms it works
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.

Mushtaqs said:
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.
Click to expand...
Click to collapse
For most part, you are doing it right, but, to solve problem with recovery, you should use "eraser" AFTER you change kernel
Sent from my R800i using xda app-developers app
---------- Post added at 01:23 PM ---------- Previous post was at 01:18 PM ----------
Mushtaqs said:
Im wondering about my battery life, because it seems to be draining faster. Im using no frills cpu with the lupus kernel alowing me to overclock to 1.6 ghz. I set my higest on 1613 mhz and lowest on 249mhz using the smartassv2 governer. any idea to whats going on ?
Click to expand...
Click to collapse
Naturaly, it will drain more battery BECAUSE it's overclocked.
Sent from my R800i using xda app-developers app

Mushtaqs said:
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.
Click to expand...
Click to collapse
I think you should repeat the fastboot process once again, so:
fastboot erase userdata
and fastboot erase system
then just flash the kernel you prefer.
I had exactly the same problem with my play bootlooping after flashing some kernels. and this solved the problem for me :victory:
sorry for my bad English, :crying: