Related
I tried a search but didn't find much of any relevance to my Arc's problem.
My Arc was getting quite laggy so I decided to wipe and put a custom ROM on. I rooted, then unlocked the bootloader and managed to put on CWM using DoomLord's kernel. Everything fine up until here.
Then, mistakenly, I tried to put stable CM7 on without updating the stock ROM. I was still on 3.0 (2.3.3) something. Well, after that it got stuck in a boot loop with the SE and CM7 logos just coming up and restarting.
I then tried the Flashtool with a stock uptodate 4.0 something firmware. It flashed successfully, but it still was stuck in the loop, albeit now without the CM7 logo. I then tried the FTA unbricking tool for repairing the trim area but it still stayed in the boot loop.
What else can I do? Maybe there is a driver problem and that is why even after using Flashtool it still doesn't boot?
I would be very grateful if someone could help me on this.
You have to flash FXP's kernel and not DooMKernel.
But I also tried to flash a stock rom and that didn't work also.
EDIT: I flashed stock ROM again, still didn't boot. Installed DoomLord kernel and then arconium and it still doesn't boot.
EDIT 2: In CWM Recovery if I try to wipe data, it says this:
"E:format_volume: no MTD partition "userdata"
Has anyone got a fix for this?
It would be much appreciated.
can you charge your phone now?
Yep, I can charge the phone.
it means your kernel is still working....
then have it fully charged, then try to flashing again.
some tips:
1. always have latest flashtools
2. always have your phone fully charged b4 flashing.
3. proceed flashing carefully. if u miss one thing, then trouble come.
4. have cache and dalvik cache cleaned after flashing a kernel or Rom.
good luck mate...
gogo415 said:
it means your kernel is still working....
then have it fully charged, then try to flashing again.
some tips:
1. always have latest flashtools
2. always have your phone fully charged b4 flashing.
3. proceed flashing carefully. if u miss one thing, then trouble come.
4. have cache and dalvik cache cleaned after flashing a kernel or Rom.
good luck mate...
Click to expand...
Click to collapse
No luck with previous firmwares so I'll try to flash the latest .62 stock ROM and then see.
I'll let you know how I get on. Thanks!
Well lads, I managed to get it working by flashing the LT18i firmware (4.0.2.A.0.42_CE). Now I just need to go back to the drawing board and try to get CM7 on there.
Thanks for all the help! I'll update this thread with any experiences.
I've managed to do it. Installed latest .62 firmware, flashed CM7 kernel, flashed 7.2 ROM and then GAPPS.
I don't know why it took me two days to bring the phone back from the dead.
ZAnwar said:
I've managed to do it. Installed latest .62 firmware, flashed CM7 kernel, flashed 7.2 ROM and then GAPPS.
I don't know why it took me two days to bring the phone back from the dead.
Click to expand...
Click to collapse
hi, i came up with the same question:
E:format_volume: no MTD partition "userdata"
and my device is moto xt502
could you be so kind to give some details how you fix it
thank you very much
I am having the same problem too..please help! i flashed cm7 kernel n followed the instructions very carefully
ilamaan said:
I am having the same problem too..please help! i flashed cm7 kernel n followed the instructions very carefully
Click to expand...
Click to collapse
I followed the instructions too, though they are not so much noob-friendly (and neither are the people on the forums, it seems...). FXP is not responding (actually, they rarely respond to anything, they usually just post when new release is out), other people either don't know how to fix it, because they haven't experienced such issues, or they are just hostile because you're "a an annoying noob". Anyway... first time after trying to flash 64 baseband on 107 or 106 release, I got stuck on logo, then flashed back to .42 and it worked. Now, while updating to 108, I tried to flash the 64 libraries and patch, but it didn't work. Got back to .42, but this time nothing happened. Still stuck on logo. And when I try to restore data, it says:
E:format_volume: no MTD partition "userdata"
Error while formatting /data!
I think I'll go back to stock... love CM, but hate the poor/no help of the developers...
try these
flash new firmware using flashtool.
after flash.turn on your device.
enable uknown source n usb debug
then turn off your fon
flash baseband 64
then turn on your fon
put fxp108 updated-kang,gaps,baseband 64 libs on your memory card,
then turn off your fon
flash fxp kernel fastboot flash boot boot.img
after flash turn on your fon..go to recovery
formated factory reset,wipe cache,clear dalvik cache,wipe betry stats..
flash update cm7.update.zip,gaps.zip,baseband64libs.zip
reboot your fon..wait 2 or 3 mint..done
My thanks goes to you. I was hoping to avoid full wipe, but I don't care anymore, since I brought my phone back to life. I skipped these steps, though:
beranchoi said:
flash baseband 64
flash baseband64libs.zip
Click to expand...
Click to collapse
...because I went to check which baseband my phone was after flashing Global .62, and it said I was on -64, so it was no more necessary. For all of you having trouble with booting, follow the instructions given.
And now back to restoring all those apps
hey guys, can you post the link to that stock firmware, baseband and libs? maybe I've downloaded something wrong :/
btw. is there still that bug with a dark screen after locking phone?
lemon66 said:
hey guys, can you post the link to that stock firmware, baseband and libs? maybe I've downloaded something wrong :/
btw. is there still that bug with a dark screen after locking phone?
Click to expand...
Click to collapse
This is the link to the stock 4.0.2.A.0.42.. flash it using flashtool.. http://www.multiupload.com/W3B7BOKUXQ
Everything you need for flashing FXP is on his signature, including bb .64 (to be flashed with flashtool - doesn't erase a thing).. then download FXP (latest is 108) and inside the zip file you'll see boot.img, which contains the special kernel (to be flashed using fastboot, not flashtool).
Also there's no dark screen bug in the latest releases, certainly not in FXP 107 and 108, which I'm using now.
Please help!
beranchoi said:
try these
flash new firmware using flashtool.
after flash.turn on your device.
enable uknown source n usb debug
then turn off your fon
flash baseband 64
then turn on your fon
put fxp108 updated-kang,gaps,baseband 64 libs on your memory card,
then turn off your fon
flash fxp kernel fastboot flash boot boot.img
after flash turn on your fon..go to recovery
formated factory reset,wipe cache,clear dalvik cache,wipe betry stats..
flash update cm7.update.zip,gaps.zip,baseband64libs.zip
reboot your fon..wait 2 or 3 mint..done
Click to expand...
Click to collapse
Hey, this is my first post on here. I am new to android and just got an arc a few days ago. Even before i got it i was trying to figure out how to mod it. I am reasonably good at computers but a lot of the stuff i read on these forums is beyond me.
I have done my best to root and install CM7 on my arc but i have failed yet again.
I finally got it rooted and was all happy until when i tried to install CM7, all i can get to is the boot screen, but although the little android on the skateboard is very cool, i wish i could get it going!
So because I dont really understand the list of instructions you posted in this quote, i was hoping you could kind of translate into noob-speak. I still dont feel like i completely understand 'flashing'. In your instructions you say to "flash baseband 64" and that is the main point where I am stuck i think. Do you use a certain program (flashtool?) for this? or do it through a terminal window on the PC.
Also links to all the files mentioned would be awesome, its hard to find proper links with multiupload down and that kind of thing. Also with the rate this kind of tech evolves, things get outdated to quickly.
Please help! At the moment i have (i think) successfully returned my arc to the stock firmware using flashtool. Although i did this twice because i re-tried flashing CM7 and failed again. And the second time i couldnt seem to select LTI5i as the device to flash too, but LTI8i is what i used and it appears to have worked. So any help with that little conundrum would also be appreciated!
Cheers for any help given, I am so desperate to get this mod going as i have spent a solid 10+ hours trying already.
your bootloader unlock?right?
which kernel u use right now?
@tehknowitallnoob, I can lead you through the whole flashing process, if you want to, but only on Friday after around 9 pm GMT +1, since I don't have the time to do it earlier.
Sent from my LT15i (Xperia arc) on CM7
Try this:
Reflash back to stock ROM with a flashtool.
Then again flash the cm7 or try cm9
-cheers
So, I was relocking my HOX in order to get the OTA JB update from carrier (H3G) in order to use the new Viper ROM.
All went well and managed this. Got re rotted and installed CWM ans Super SU.
However, I read that before installing the JB Viper ROM it was important to do a full wipe. Using CWM i did this. Specifically I did the wipe data/factory reset, wipe cache partition, wipe dalvik cache and format system.
Now my phone is stuck on the white HTC screen. Please help.
Thanks
You formatted system, which basically wiped the rom. Reflash and don't format system.
Sent from something that's BETTER THAN YOURS
You should probably read what bricking your phone means.
Sent from my HTC One X
And don't forget to flash the boot.img file !
Thanks for the quick response and apologies for the basic and wrongly termed questions. Just panicking a little.
How do i get the ROM and boot.img on to the fone? Because it sticks at the white screen the pc doesn't seem to detect it.
Last time i used a stock RUU and followed that process. Will i be able to flash the new Viper ROM instead?
thanks
The boot.img is supposed to be flashed from the PC. To get the Rom into the phone you need to go back to clockworkmod, go into mounts and storage and press the mount usb thing
Edit - to flash the boot.img find a thread about fastboot. Don't worry you'll get there
To get the ROM on the phone boot into cwm and GOTO mounts & storage
Then mount USB storage
It should now be detected as a drive on your PC and you can copy the ROM back over
Sent from my HTC One X using xda app-developers app
Thanks. I did as you guys suggested and was able to install the Viper ROM (used the tweaked stock kernel as recommended in the download).
So have a ROM now but I have no service with my carrier and when I try to connect to wifi it says 'error'. Have I missed or done something wrong?
Cheers
columbo67 said:
Thanks. I did as you guys suggested and was able to install the Viper ROM (used the tweaked stock kernel as recommended in the download).
So have a ROM now but I have no service with my carrier and when I try to connect to wifi it says 'error'. Have I missed or done something wrong?
Cheers
Click to expand...
Click to collapse
While installing the rom, did you choose at the kernel question to keep the stock kernel and modules
Sent from my GT-P5110 using xda app-developers app
Mr Hofs said:
While installing the rom, did you choose at the kernel question to keep the stock kernel and modules
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
Got it resolved. I had used the tweaked kernel and assumed that this was not standard, so when asked about which kernel i was using i said it wasn't the viper one.
So i went back to basics and used the kernel that came with the ROM zip and just flashed both. Working fine now. The only question is whether I could have used the tweaked kernel and answered yes to using the viper version?
Thanks for your help. Felt like I have learned a fair bit in the last 12 hours though!
Well if you flashed a different custom kernel you can answer that with the question so it won't load the stock modules but backs up the custom modules from the custom kernel. This way it won't mess up functionality.
When you use a boot.img without it proper modules it can mess up those things you experienced. Hope i make my self clear
Mr Hofs said:
Well if you flashed a different custom kernel you can answer that with the question so it won't load the stock modules but backs up the custom modules from the custom kernel. This way it won't mess up functionality.
When you use a boot.img without it proper modules it can mess up those things you experienced. Hope i make my self clear
Click to expand...
Click to collapse
Ye, perfectly. cheers
Looking at this thread, makes me realize that there are still a lot of polite helpful guys out there :thumbup:
Sent from my Bladed One X. Blade v5.0.0 is here. Based on RUU and with OTA.
Hello again guys, I installed LuPuS v8 JB Kernel on my phone (I had 4.0.2.A.0.58 Enhanced Firmware (Gingerbread) installed) then I went to CWM to flash the .zip with the wifi modules and G.Apps but when I rebooted I got a bootloop. what I have to do to correctly install it? Please guide me since I'm kinda newbie to this of unlocked bootloaders and kernels :/ (I'm trying to install PACman rom and followed the FAQ guide but...)
EDIT: Forgot to add, my PLAY is an r800a(i) GSM btw, I have to take off the SDcard to enter to the Kernel menu, idk if this is normal
xkeita said:
Hello again guys, I installed LuPuS v8 JB Kernel on my phone (I had 4.0.2.A.0.58 Enhanced Firmware (Gingerbread) installed) then I went to CWM to flash the .zip with the wifi modules and G.Apps but when I rebooted I got a bootloop. what I have to do to correctly install it? Please guide me since I'm kinda newbie to this of unlocked bootloaders and kernels :/ (I'm trying to install PACman rom and followed the FAQ guide but...)
EDIT: Forgot to add, my PLAY is an r800a(i) GSM btw, I have to take off the SDcard to enter to the Kernel menu, idk if this is normal
Click to expand...
Click to collapse
After you flash the Rom reboot the phone and just let it fully boot. After that you can go back to CWM and flash the WiFi modules and other add-ons
You need to boot into the kernel's recovery and set it to jb mode or ics depending on your rom. Then make sure your rom and gapps don't exceed the system partition size, which it most likely did if you flashed the full gapps package as well.
The default recovery for the lupus jb kernel is TWRP, if you load into another CWM recovery it most likely did not flash to the correct partition arrangement that lupus kernel use therefore the rom can't boot.
Sent from XDA app
Sounds like you didn't wipe data
So go into cwm and wipe cache,data,delvick and try rebooting then
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™
crazymonkey05 said:
Sounds like you didn't wipe data
So go into cwm and wipe cache,data,delvick and try rebooting then
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™
Click to expand...
Click to collapse
These are the steps I did
1.- Flash the 4.0.2.A.0.58 Enhanced (2.3.4 firmware)
2.- Flash the LuPuSv8 JB Kernel via flashtools
3.- Take out the SDcard (I can't access to kernel menu without taking it out)
4.- Access Kernel menu then go into recovery mode
5.- Wipe data/cache/davlik
6.- Flash p.a.c.man jb
7.- Reboot
And then it bootloops and stays like that (i left it alone and it stayed like that for about 20 or 30 minutes)
I also wiped data/cache and davlik after flashing the rom, but got the same results, maybe I need a vendor unlocked firmware like in Turbo Kernel? I will try that...
Edit: Flashed the vendor unlocked firmware then wiped cache and data then installed the PACman rom but got bootloop again, maybe I should try with another kernel...
xkeita said:
These are the steps I did
1.- Flash the 4.0.2.A.0.58 Enhanced (2.3.4 firmware)
2.- Flash the LuPuSv8 JB Kernel via flashtools
3.- Take out the SDcard (I can't access to kernel menu without taking it out)
4.- Access Kernel menu then go into recovery mode
5.- Wipe data/cache/davlik
6.- Flash p.a.c.man jb
7.- Reboot
And then it bootloops and stays like that (i left it alone and it stayed like that for about 20 or 30 minutes)
I also wiped data/cache and davlik after flashing the rom, but got the same results, maybe I need a vendor unlocked firmware like in Turbo Kernel? I will try that...
Edit: Flashed the vendor unlocked firmware then wiped cache and data then installed the PACman rom but got bootloop again, maybe I should try with another kernel...
Click to expand...
Click to collapse
Do as above but after step 5 you need to go to mounts & storage and format Data/Cache & System (IMPORTANT DO NOT FORMAT ANYTHING ELSE):good:
Then flash p.a.c.man JB
tallman43 said:
Do as above but after step 5 you need to go to mounts & storage and format Data/Cache & System (IMPORTANT DO NOT FORMAT ANYTHING ELSE):good:
Then flash p.a.c.man JB
Click to expand...
Click to collapse
I did what you said but it keeps bootlooping @[email protected]
Why don't u use turbo kernel and start the process again...and no is not normal to take out your memory card to enter boot menu
Sent from my R800i using xda app-developers app
Yep, flashed turbo kernel v3.1 and it worked! Damn that lupus kernel made me waste many precious time...
xkeita said:
Yep, flashed turbo kernel v3.1 and it worked! Damn that lupus kernel made me waste many precious time...
Click to expand...
Click to collapse
Cool:good:
xkeita said:
Yep, flashed turbo kernel v3.1 and it worked! Damn that lupus kernel made me waste many precious time...
Click to expand...
Click to collapse
flashing that ftf was ur problem. U needed to flash the ftf with unlocked partitions. Same thing you shpoud of also needed to do for turbo kernel then format system and data partitions in either CWM or via fastboot, then flash kernel.
Sent from my GT-I9300 On Official JB
@tallman43 thx for the help bro (Y)
wedgess said:
flashing that ftf was ur problem. U needed to flash the ftf with unlocked partitions. Same thing you shpoud of also needed to do for turbo kernel then format system and data partitions in either CWM or via fastboot, then flash kernel.
Click to expand...
Click to collapse
I flashed the FTF with unlocked partitions played with the phone for about 30 secs, then flashed kernel, went to kernel menu then formated system, data, cache and davlik via CWM then flashed the rom, but that ended in bootloop, did the same with turbo kernel and it worked.
easy fix dont use Pac Rom its junk
xkeita said:
Hello again guys, I installed LuPuS v8 JB Kernel on my phone (I had 4.0.2.A.0.58 Enhanced Firmware (Gingerbread) installed) then I went to CWM to flash the .zip with the wifi modules and G.Apps but when I rebooted I got a bootloop. what I have to do to correctly install it? Please guide me since I'm kinda newbie to this of unlocked bootloaders and kernels :/ (I'm trying to install PACman rom and followed the FAQ guide but...)
EDIT: Forgot to add, my PLAY is an r800a(i) GSM btw, I have to take off the SDcard to enter to the Kernel menu, idk if this is normal
Click to expand...
Click to collapse
use slimbean !takes less room use it with lupus kerenel jb 480 rom.
---------- Post added at 02:49 PM ---------- Previous post was at 02:00 PM ----------
Just want to tell you that your kernels are by far the best. But the PAC man rom and the Paranoid hmm Dont work I cant get them to ever boot on my R800x CDMA
Keep up the hard work.
Guys i really need help, I'm using an xperia play and i had just unlocked the bootloader and then flashed a the trueancestors ics rom and the LuPuS_zeus_Stock-gB+iCsv7-full kernel. Now it turns out that i didnt like the rom so i put it back to stock, still with the lupus kernel. Everything was working however i wanted to have the doomkernel v14. So i flashed the doomkernel and it was working however the wifi had erroros so i changed back to the lupus kernel. Again everything was working fine now. I then found out how to fix the wifi problem on doomkernelv14 so refrlashed that kernel. Before i reflashed the kernel i deleted the trueancestors isc rom as i didnt like it so i thought it would be ok. After the flash i tried to reboot the device, and it was stuck on the bootloader for doomkernel, not in a bootloop just stuck at doomkernel bootloader. I tried to fix this by going to recovery (clockwork mod) and then did a factory reset, wiped the cache and data and the dalvik cache as i saw these online for instructions on how to fix this problem. Still i had the same problem, stuck at bootloader. So i tried somthing different and reinstalled the trueancestors ics rom, and tried to reboot the xperia play, again stuck at bootloader. Im sorry if this was a bit long but I AM LITTRALLY BEGGING FOR SOME HELP! Please make a suggestion as to how i can fix this ASAP. Can it be fixed?Thank you for you Advice it is very much aprecciated. Ive posted this somewhere else in which i couldnt find but i really need help on this, please can anyone help. :crying:
you shouldn't post a like or not like any developer handmake. try back to a stock..
Mushtaqs said:
Guys i really need help, I'm using an xperia play and i had just unlocked the bootloader and then flashed a the trueancestors ics rom and the LuPuS_zeus_Stock-gB+iCsv7-full kernel. Now it turns out that i didnt like the rom so i put it back to stock, still with the lupus kernel. Everything was working however i wanted to have the doomkernel v14. So i flashed the doomkernel and it was working however the wifi had erroros so i changed back to the lupus kernel. Again everything was working fine now. I then found out how to fix the wifi problem on doomkernelv14 so refrlashed that kernel. Before i reflashed the kernel i deleted the trueancestors isc rom as i didnt like it so i thought it would be ok. After the flash i tried to reboot the device, and it was stuck on the bootloader for doomkernel, not in a bootloop just stuck at doomkernel bootloader. I tried to fix this by going to recovery (clockwork mod) and then did a factory reset, wiped the cache and data and the dalvik cache as i saw these online for instructions on how to fix this problem. Still i had the same problem, stuck at bootloader. So i tried somthing different and reinstalled the trueancestors ics rom, and tried to reboot the xperia play, again stuck at bootloader. Im sorry if this was a bit long but I AM LITTRALLY BEGGING FOR SOME HELP! Please make a suggestion as to how i can fix this ASAP. Can it be fixed?Thank you for you Advice it is very much aprecciated. Ive posted this somewhere else in which i couldnt find but i really need help on this, please can anyone help. :crying:
Click to expand...
Click to collapse
When switching kernels with different partition layout you have to delete data and system partition in fastboot mode.
I'm lazy to type again so here is a link where it is explained already:
http://forum.xda-developers.com/showthread.php?t=1849536&page=100
You can prevent future problems by wiping data and system partittion from CWM and THEN flash new kernel that have different partittion layout
Bakisha said:
When switching kernels with different partition layout you have to delete data and system partition in fastboot mode.
I'm lazy to type again so here is a link where it is explained already:
http://forum.xda-developers.com/showthread.php?t=1849536&page=100
You can prevent future problems by wiping data and system partittion from CWM and THEN flash new kernel that have different partittion layout
Click to expand...
Click to collapse
I havent tried this yet,becuase i need my dad to allow flash tool to work (Parental controls ffs -.-") however i saw the thread and i saw this part saying enter these commands "fastboot erase userdata and fastboot erase system i undestand how to get the command thing open but how do u enter these in, and what i mean is do you just open the command thing and just paste these in or do u have to right click somthing open comand promt here and all the stuff then enter them? Also these steps u listed, everything is fine its just my lack off knowladge for some of these things which i do apologize for
" Fully working steps, that is 100% working:
1.flash ftf with unlocked vendor partition (.62 or .79)
2.flash lupus gb kernel
3.erase system and data from fastboot
4.enter recovery and flash your rom "
Where do you get the unlocked vender partition, and which one is better .62 or .79 and if u could send me a link as your helping me i think ur choice of links for this is more reliable than mine, and again this is greatly appreciated.
" Fully working steps, that is 100% working:
1.flash ftf with unlocked vendor partition (.62 or .79)
2.flash lupus gb kernel
Download file name R800i_4.0.2.A.0.79.ftf from Xperia Play Index - ROM'S, FIRMWARE, KERNEL'S, GUIDE'S, THEMES, MOD'S second post have firmware files
Guide how to use flashtool you can find at [GUIDE][18th Dec][4Noobs] Flashing A FTF File Using Flashtool
Flashing .79 or .62 firmware is necessary if you are planning to use lupus gb or icd/gb kernel - and you only need to do it once.
Flashing kernel is same, but when pressed on lighting icon, choose "fastboot"
3.erase system and data from fastboot
Ok, i made a zip for you. Download it from attachment, unpack to anywhere you like and double-click file named "start". Power off phone, press search and while keeping it pressed, plug in usb. I don't think you need admin rights for that, but:
MAKE SURE YOU HAVE ROM PLACED ON YOUR SD CARD! Just in case, because that program will erase everything from your phone.
You should be able to enter recovery and/or flash your rom/restore your backup.
4.enter recovery and flash your rom "
Also, read some sticky threads, they are there for a reason
Again im really sorry to bother you with this, but what if i dont want to flash the rom, becuase i didnt like it in the first place so i went back to stock, however this method of returning to stock was to flash the R800i_4.0.2.A.0.62_(1253-4437).ftf file. Now what it did was return it to stock rom (AFTER i tried the rom i didnt like) and unrooted the phone, i dont know if it returns the phone to stock firmware, and if the method of the system data wipe thing with the command prompt deleted everything, what can i flash? Little more explaination as to why im asking. Before this boot stuck thing hapenned i had used that same ftf file to return it to stock and unrooted. I re-rooted the phone and then flashed the lupus kernel. Everything was fine. I wanted to flash the doomkernel because like a dum nut i wanted to show off that i could overclock to 2ghz ( if i wanted to) as if alrdy stated before and did so. I think you can only flash zip files from your SD card so the ftf file wont be able to be flashed while on the device. So what do i flash? Should i just flash the rom i dont like and try return it to stock, then flash the ftf .79 firmware again after re-rooting the phone, then flash the doomkernelv14. In short i want to stay with the normal gingerbread 2.3.4 with doomkernelv14. Again i havent tried this yet and also sorry for these long rambly posts, i just want to give you as much info as possible in order for you to help me. Thank you so much for your solution btw much appriciated.:good:
And almost forgot i also want it back to rooted but i can do that myself, i just thought i'd specifiy it just incase its worth anything.
Try this
http://forum.xda-developers.com/showthread.php?t=2408688
Sent from my R800i using xda app-developers app
Bakisha said:
Try this
http://forum.xda-developers.com/showthread.php?t=2408688
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Alright ive had the chance to try it out and i just got started on the firmware flash, problem is that its stuck at 16/033/2013 14:33:15
- INFO - Preparing files for flashing
16/033/2013 14:33:53 - INFO - Please connect your device into flashmode.
16/033/2013 14:33:54 - INFO - Opening device for R/W
16/033/2013 14:33:54 - INFO - Reading device information (stuck here)
Any sugessions to what i should do?
Alright i fixed the firmware flash problem and have made it all the way to the the part where you flash your custom rom and the phone should magicly work again. Ive got past the doomlord booting screen, thats good, now im stuck at a black screen, any ideas on whats going on?
K so i fixed all the above problems, by using a different kernel, and repeating all the previous steps, THE XPERIA PLAY IS BACK DUDE THANK YOU( hit the thanks button like 100 times).
Mushtaqs said:
K so i fixed all the above problems, by using a different kernel, and repeating all the previous steps, THE XPERIA PLAY IS BACK DUDE THANK YOU( hit the thanks button like 100 times).
Click to expand...
Click to collapse
Glad to helpfull
Remember, kernel must much rom. Gb stock kernel for gb sony based rom, you'll get stuck agan in kernel logo if if you flash kernel that don't match rom/firmware
Just read in kernel thread for info on wich roms it works
Sent from my R800i using xda app-developers app
Everythings fine at the moment and i dont want to make any more dumb mistakes so im just going to ask if wiping the data and system partitions in CWM still deleted everything. I just recently got all of my apps back and all that good stuff, i just want to know if they will get erased if i do this. My deepest appologies for bothering you with something so minor and selfish.
Sorry another selfish request (Damit) but when ever i flash the doomkernel v14 my wifi gets error, i was wondering if u knew how to fix this, if u dont and have the free time or feel like it, direct me to somone who does?
Mushtaqs said:
Everythings fine at the moment and i dont want to make any more dumb mistakes so im just going to ask if wiping the data and system partitions in CWM still deleted everything. I just recently got all of my apps back and all that good stuff, i just want to know if they will get erased if i do this. My deepest appologies for bothering you with something so minor and selfish.
Click to expand...
Click to collapse
Mushtaqs said:
Sorry another selfish request (Damit) but when ever i flash the doomkernel v14 my wifi gets error, i was wondering if u knew how to fix this, if u dont and have the free time or feel like it, direct me to somone who does?
Click to expand...
Click to collapse
Yes, if you wipe data and system then EVERYTHING is deleted. All your apps (data) and even android OS itself (system). You'll have to either flash new rom or restore backup after wiping system
Doomkernel need wifi modules to be installed from CWM recovery to have working wifi
I'll attach it
Im wondering about my battery life, because it seems to be draining faster. Im using no frills cpu with the lupus kernel alowing me to overclock to 1.6 ghz. I set my higest on 1613 mhz and lowest on 249mhz using the smartassv2 governer. any idea to whats going on ?
ok...i screw up my xperia play... dunno what to do.
hi guys, been a noob after i fed up with my xperia x8 now i having a xperia play f or 2 years and try to install a custom kernel and roms but i end up brick my phone. it just stuck at logo "xperia free play". it still can enter cwm recovery mode but when i use the method press the arrow thing then plug in the usb cable to pc , it seems my pc did detect my phone but cant show up my memory card in 'my computer' window. The i try to use fastboot & flashtool both can detect my phone after plug in. Here is what i do before brick:
first thing i did on my phone was to upgrade the stock kernel 4.0.2.a.0.42, then i unlock the bootloader, root it, and start download the custom rom without download the requirement kernel. after that, i install CWM using fast boot, put the custom rom to sd card, wipe user data, bla bla bla, then install the custom rom, the next thing i see is the problem i talking about earlier. So i try to using the service update from SCE but it just say im using a modified kernel hence i unable recover it using that method. so, i try to use flash tool x10 (i cant get any working download it keep saying error 404 link, this is the best i have now) when i press the flash it come out red words with error usb ...the thing is my phone cant get detected by my computer.... What to do or it is over? (p/s : i download the flash tool & adb package winrar file & the custom rom i mention is close 2 perfection)
I know is a bit long but I really need help on my phone, i still have a x8 here from my mom and mine is xperia play brick for 3 days now i still cant find a way to solve it. PLEASE HELLLLLLLLLLPPPPPPPPPPPP. THANK YOU FOR THOSE RESPONSE~!
Bakisha said:
Glad to helpfull
Remember, kernel must much rom. Gb stock kernel for gb sony based rom, you'll get stuck agan in kernel logo if if you flash kernel that don't match rom/firmware
Just read in kernel thread for info on wich roms it works
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.
Mushtaqs said:
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.
Click to expand...
Click to collapse
For most part, you are doing it right, but, to solve problem with recovery, you should use "eraser" AFTER you change kernel
Sent from my R800i using xda app-developers app
---------- Post added at 01:23 PM ---------- Previous post was at 01:18 PM ----------
Mushtaqs said:
Im wondering about my battery life, because it seems to be draining faster. Im using no frills cpu with the lupus kernel alowing me to overclock to 1.6 ghz. I set my higest on 1613 mhz and lowest on 249mhz using the smartassv2 governer. any idea to whats going on ?
Click to expand...
Click to collapse
Naturaly, it will drain more battery BECAUSE it's overclocked.
Sent from my R800i using xda app-developers app
Mushtaqs said:
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.
Click to expand...
Click to collapse
I think you should repeat the fastboot process once again, so:
fastboot erase userdata
and fastboot erase system
then just flash the kernel you prefer.
I had exactly the same problem with my play bootlooping after flashing some kernels. and this solved the problem for me :victory:
sorry for my bad English, :crying:
Hi, I've been having some problems with my Xperia Play getting stuck in a boot loop after flashing anything, or restoring a backup in CWM. This includes mods, like Adrenoboost, and the NXT Lockscreen, to themes. I have the Xperia Play R800x with an unlocked bootloader (via unlock code from Sony) and I'm using stock 2.3.3 Gingerbread, with the stock Kernel. I boot CWM by hotBooting LuPuS with Fastboot. I'm not really sure what to do because I really want to install these mods, and because restoring my nandroid backups also gets it stuck in a bootloop, I have to reflash the stock .ftf with FlashTool and reroot it every time.
x2110311x said:
Hi, I've been having some problems with my Xperia Play getting stuck in a boot loop after flashing anything, or restoring a backup in CWM. This includes mods, like Adrenoboost, and the NXT Lockscreen, to themes. I have the Xperia Play R800x with an unlocked bootloader (via unlock code from Sony) and I'm using stock 2.3.3 Gingerbread, with the stock Kernel. I boot CWM by hotBooting LuPuS with Fastboot. I'm not really sure what to do because I really want to install these mods, and because restoring my nandroid backups also gets it stuck in a bootloop, I have to reflash the stock .ftf with FlashTool and reroot it every time.
Click to expand...
Click to collapse
Hi. Not all mods are 100% compatible with stock ROM so you should use a custom one. Many custom ROMs are better than the stock one.
WhiteWashed said:
Hi. Not all mods are 100% compatible with stock ROM so you should use a custom one. Many custom ROMs are better than the stock one.
Click to expand...
Click to collapse
My only problem is, when I flash other ROMs they don't work, unless I also flash a custom Kernel. Anytime I flash a custom kernel, WiFi never connects, even if I flash the WiFi modules. It gets stuck at Obtaining IP Address, then stops.
x2110311x said:
My only problem is, when I flash other ROMs they don't work, unless I also flash a custom Kernel. Anytime I flash a custom kernel, WiFi never connects, even if I flash the WiFi modules. It gets stuck at Obtaining IP Address, then stops.
Click to expand...
Click to collapse
There's are some Gingerbread based roms that work also with the stock kernel and won't give you any problem with wifi (personal experience).
Try the gbx_play v3-rebuild here: http://forum.xda-developers.com/showthread.php?t=1897634
Or the Gin2kitkat here: http://forum.xda-developers.com/showthread.php?t=1631144
Try to flash one of these and let us know
Remember that before you flash a ROM you MUST make a wipe data/factory reset, wipe cache and wipe Dalvik Cache (in advanced options).
WhiteWashed said:
There's are some Gingerbread based roms that work also with the stock kernel and won't give you any problem with wifi (personal experience).
Try the gbx_play v3-rebuild here: http://forum.xda-developers.com/showthread.php?t=1897634
Or the Gin2kitkat here: http://forum.xda-developers.com/showthread.php?t=1631144
Try to flash one of these and let us know
Remember that before you flash a ROM you MUST make a wipe data/factory reset, wipe cache and wipe Dalvik Cache (in advanced options).
Click to expand...
Click to collapse
I do wipe the data and cache. I know how to install ROMs, I've done it with TWRP on my Kindle Fire, but I get stuck in a boot loop every time. I'll try these ROMs and see how they go.
WhiteWashed said:
There's are some Gingerbread based roms that work also with the stock kernel and won't give you any problem with wifi (personal experience).
Try the gbx_play v3-rebuild here: http://forum.xda-developers.com/showthread.php?t=1897634
Or the Gin2kitkat here: http://forum.xda-developers.com/showthread.php?t=1631144
Try to flash one of these and let us know
Remember that before you flash a ROM you MUST make a wipe data/factory reset, wipe cache and wipe Dalvik Cache (in advanced options).
Click to expand...
Click to collapse
I did a Factory Reset on CWM, then flashed Gin2KitKat, and wiped the cache and dalvik cache and it's stuck on the Android boot animation. It's been sitting there for like 10 minutes or so now. Flashtool does recognize it though.
Connected Device: R800
Installed version of busybox: BusyBox x1.21.1-Stericson (2013-09-26 14:33:26 BST) multi-call binary
Android Version: 2.3.7 / kernel version 2.6.32.9-perf / Build number: 4.0.2.A.0.79
Click to expand...
Click to collapse
It worked fine as soon as I hotBooted it with LuPus. I'm gonna try installing the other ROM I wanted and hotBooting LuPus
Strange, I have the opposite problem: lupus doesn't boot any ROM for me, excepting ICs ones.
In fact, to install a GB ROM I always have to flash first the stock rom and fw, and then flash the ROM with a custom recovery. Anyway by "hot booting" you mean custom recovery right?
Sent from my R800i using xda app-developers app
No, what I'm doing is using Fastboot to boot the phone with the kernel, without flashing it, to test it out. As soon as you shut the phone off, and turn it back on, it boots with whatever kernel is flashed on it
Sent from my R800x using xda app-developers app
x2110311x said:
No, what I'm doing is using Fastboot to boot the phone with the kernel, without flashing it, to test it out. As soon as you shut the phone off, and turn it back on, it boots with whatever kernel is flashed on it
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
That's what I mean with custom recovery :laugh: (don't confuse with custom kernel).
When I had stock kernel I would boot LuPuS just for CWM, but I'll hotboot kernels to see how well they run
Sent from my R800x using xda-developers app
x2110311x said:
When I had stock kernel I would boot LuPuS just for CWM, but I'll hotboot kernels to see how well they run
Sent from my R800x using xda-developers app
Click to expand...
Click to collapse
So here's what you need to do, since you want stock and and fastbootalot for recoveries y don't you download xperia play clockwork mod app? It's version 4 or something like that don't use xparts it don't work with our Verizon plays since you have root this will install recovery for you to flash Roms mods etc
I'll edit later with a link to the thread that has the clockwork mod app install that MAKE A NANDROID before you flash anything it helps worse case you hotboot lupus to restore your nandroid you have then reboot and guess what stock 2.3.3 Rom and kernel
Sent from my ADR6300 using xda app-developers app
No I got everything to work fine. I have LuPuS flashed on, and I'm using the xElite Gamer ROM with no problem.
Sent from my R800x using xda-developers app