Hello XDA!
Hopefully im posting in the correct area of help;
Using a i747m factory unlocked - Im having a problem with my radio or carrier with the current ROM (AOKP(Jellybean 4.2.2 )Task650 (2.22.2013).
http://forum.xda-developers.com/showthread.php?t=1766684&page=1
When it was first installed fresh the signal would be full bar on the LTE network but still had to assign the LTE APN settings for Telus. now - it seems that the signal or similar is glitched? possibly? If i switch to 3G mode my signal is full (-70 or lower) where as when it get too LTE mode, living beside a hotspot i get between -99 and -120 before like i said was all working except data. (LTE was enabled working)
Ive gone through with my providers APN settings and all is correctly setup - Now with this - to connection with applictions are having a problem noticing that data is on the phone - even with Wi-Fi does the applications get numerous errors trying to receive data. It seems too now that seraching for networks will just also close out the options to do so and manually does it connect with a reboot as long as the APN is set.
anyone with ideas?
Edit: time stamps are also inconsistent ; i believe is why the applications are having issues too connect - unable to verify security certificates
Y3K89 said:
Hello XDA!
Hopefully im posting in the correct area of help;
Using a i747m factory unlocked - Im having a problem with my radio or carrier with the current ROM (AOKP(Jellybean 4.2.2 )Task650 (2.22.2013).
http://forum.xda-developers.com/showthread.php?t=1766684&page=1
When it was first installed fresh the signal would be full bar on the LTE network but still had to assign the LTE APN settings for Telus. now - it seems that the signal or similar is glitched? possibly? If i switch to 3G mode my signal is full (-70 or lower) where as when it get too LTE mode, living beside a hotspot i get between -99 and -120 before like i said was all working except data. (LTE was enabled working)
Ive gone through with my providers APN settings and all is correctly setup - Now with this - to connection with applictions are having a problem noticing that data is on the phone - even with Wi-Fi does the applications get numerous errors trying to receive data. It seems too now that seraching for networks will just also close out the options to do so and manually does it connect with a reboot as long as the APN is set.
anyone with ideas?
Edit: time stamps are also inconsistent ; i believe is why the applications are having issues too connect - unable to verify security certificates
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1831898&highlight=modem
You're welcome..
The link i gave is basically just a collection of modems for both i747m and i747.
amzi said:
http://forum.xda-developers.com/showthread.php?t=1831898&highlight=modem
You're welcome..
The link i gave is basically just a collection of modems for both i747m and i747.
Click to expand...
Click to collapse
THANK YOU! Re-flashed modem - All is smooth - +1 thanked.
now too fully enjoy this ROM goodness ^^
Related
I'm running my Captivate glide on Orange network (device is unlocked).
I rooted it following all the steps shown in http://forum.xda-developers.com/showthread.php?t=1378082 (BTW, works great thanks).
I kept AT&T rom, but issue happens also with Rogers rom.
This happens only on 3G/3G+ connections.
WiFi works great.
The issue looks quite simple: data connection drops (very) often.
No more email push notifications, ...
Have to go to Settings > Network > Airplane mode : switch it on and then witch it off to get data connection back.
It is not an operator issue. My other phone(s) are using the same and data connection works.
Is this a radio rom issue ? Is there a fix ? (didn't find a thing related to that issue).
Anyone having this issue ?
Depends on how strong your network is, I have experienced this a few times.
I keep getting this now that I have had more experience with it, anyone else experiencing random sharp drops in data speed/connection?
vil33 said:
Depends on how strong your network is, I have experienced this a few times.
Click to expand...
Click to collapse
Well, I have 4 out of 5 bars... Signal looks strong enough to me.
If I use the same SIM card in a HTC MyTouch 4G slide => Works great, no data connection drops at all !
Looks like it depends on what programs are running and using the data connection:
- email push - connection last long enough.
- when I'm running Bejive (IM) - connection last a bit less (before the 1st drop).
- when I add Skype & LoudTalks : almost every 5 minutes connection drops.
I also noticed that after a voice phone call, sometimes data connection doesn't (cannot) restart by itself ...
Here is an idea :
Is there a way to tweak Operator connection like it can be done with HTC phones : GSM + CDMA, CDMA Only ?
Because when you switch the phone to CDMA only, it uses different frequencies and allow to keep data connections while talking on the phone.
Didn't find that option in Captivate Glide settings ...
frav said:
Well, I have 4 out of 5 bars... Signal looks strong enough to me.
If I use the same SIM card in a HTC MyTouch 4G slide => Works great, no data connection drops at all !
Looks like it depends on what programs are running and using the data connection:
- email push - connection last long enough.
- when I'm running Bejive (IM) - connection last a bit less (before the 1st drop).
- when I add Skype & LoudTalks : almost every 5 minutes connection drops.
I also noticed that after a voice phone call, sometimes data connection doesn't (cannot) restart by itself ...
Here is an idea :
Is there a way to tweak Operator connection like it can be done with HTC phones : GSM + CDMA, CDMA Only ?
Because when you switch the phone to CDMA only, it uses different frequencies and allow to keep data connections while talking on the phone.
Didn't find that option in Captivate Glide settings ...
Click to expand...
Click to collapse
Settings --> Wireless and Network --> Mobile Networks --> Network Mode
Didn't make a difference for me using HSPA only.
vil33 said:
Settings --> Wireless and Network --> Mobile Networks --> Network Mode
Didn't make a difference for me using HSPA only.
Click to expand...
Click to collapse
I just checked ... I don't have the "Network Mode" option in "Mobile Networks" section.
I have Roaming, allow data connection, APN, ... but not Network mode.
Weird...
I checked the operator info. Nothing out of the ordinary there.
I'm stuck ...and it keeps happening. No solution for now.
frav said:
I just checked ... I don't have the "Network Mode" option in "Mobile Networks" section.
I have Roaming, allow data connection, APN, ... but not Network mode.
Weird...
I checked the operator info. Nothing out of the ordinary there.
I'm stuck ...and it keeps happening. No solution for now.
Click to expand...
Click to collapse
Maybe try flashing the Rogers kernel and ROM since that's what I have?
vil33 said:
Maybe try flashing the Rogers kernel and ROM since that's what I have?
Click to expand...
Click to collapse
Already did that, but that was a few days ago when looking for the WiFi tethering feature ...
I'll flash it back to Rogers kernel & ROM and test.
Update: Flashed Rogers rom.
Good news is I now have the Network settings back. (AT&T rom is not the right one, for sure !)
Data connection last longer. But the issue is still here.
Still investigating...
Anyone else having this issue ?
the day before yesterday, I went to the copier room in my school and stayed for about 2 hours (too many copying). before i get out, i have no signal (mobile network not available). I need to go out to have signal back or reboot.
It happened again yesterday on the exact same location, I'm going to be there again now.
I believe it might be location wise....in my case at least.
gabby131 said:
the day before yesterday, I went to the copier room in my school and stayed for about 2 hours (too many copying). before i get out, i have no signal (mobile network not available). I need to go out to have signal back or reboot.
It happened again yesterday on the exact same location, I'm going to be there again now.
I believe it might be location wise....in my case at least.
Click to expand...
Click to collapse
I checked, looks like it is not linked to a specific location. I've been travelling and issue kept occuring.
Once data connection is ok, it usually stays up for 2 to 5 minutes, then drops.
"4G" symbol is still displayed - but no more data connection. Web pages not available in browser, no email sync, no more IM, ...
While data connection is down, Cellphone still works, WiFi as well.
It may be linked to an APN issue ... Or definitely a Radio ROM issue.
I'm running Baseband I927RUXKJ5.
Anyone else having this issue ?
When I got the phone the AT&T rep told me there was a known issue with the phone dropping down to lower data speed. He told me if I experienced it to get a new SIM card. Doesn't sound exactly the same but maybe try that?
It is my first forum post and I believe I am posting it in the right section... I tried finding a similar problem to mine, but seemed to only find people that wanted to turn LTE off instead of on. The AT&T Galaxy S3 phone is rooted and I have gone between ics and jb roms and have gotten LTE to work every time. The problem is after I reboot the phone I lose LTE. I get 20+ up 10 down on LTE. After I loose LTE I get around 8 up 4 down.
I have tried.
1.) Re-installing a rom which gives me LTE until I reboot phone.
2.) I have tried installing modems from http://forum.xda-developers.com/showthread.php?t=1831898. If I have lost LTE after reboot, I can (9 out of 10) get LTE to work again after installing a modem. I lose it once I reboot the phone again though and am unable to flash a new modem to get LTE back to working and it won't unless I do 1.) again.
3.) I have made sure apn settings are on the correct pta lte setting. Usually most of the rom's have that already set to begin with.
4.) I have tried the *#2263# to change it to LTE. This WORKS and will reboot my phone into LTE everytime, but I lose being able to make phone calls, etc. From what I understand as well, I am unable to go to 3g/2g after settings LTE ALL and I don't want that either...
It is the only problem I have had with this phone. I notice a lot of times after I install a rom and reboot, it upgrades, and I lose LTE. I install a modem and get LTE back. I reboot phone normally without doing anything to the phone and it upgrades apps again and I lose LTE. That is the only conclusion I can come to as to why I lose LTE after reboot.
terminalerror said:
It is my first forum post and I believe I am posting it in the right section... I tried finding a similar problem to mine, but seemed to only find people that wanted to turn LTE off instead of on. The AT&T Galaxy S3 phone is rooted and I have gone between ics and jb roms and have gotten LTE to work every time. The problem is after I reboot the phone I lose LTE. I get 20+ up 10 down on LTE. After I loose LTE I get around 8 up 4 down.
I have tried.
1.) Re-installing a rom which gives me LTE until I reboot phone.
2.) I have tried installing modems from http://forum.xda-developers.com/showthread.php?t=1831898. If I have lost LTE after reboot, I can (9 out of 10) get LTE to work again after installing a modem. I lose it once I reboot the phone again though and am unable to flash a new modem to get LTE back to working and it won't unless I do 1.) again.
3.) I have made sure apn settings are on the correct pta lte setting. Usually most of the rom's have that already set to begin with.
4.) I have tried the *#2263# to change it to LTE. This WORKS and will reboot my phone into LTE everytime, but I lose being able to make phone calls, etc. From what I understand as well, I am unable to go to 3g/2g after settings LTE ALL and I don't want that either...
It is the only problem I have had with this phone. I notice a lot of times after I install a rom and reboot, it upgrades, and I lose LTE. I install a modem and get LTE back. I reboot phone normally without doing anything to the phone and it upgrades apps again and I lose LTE. That is the only conclusion I can come to as to why I lose LTE after reboot.
Click to expand...
Click to collapse
I am in the same boat as you. I can force LTE with *#*#4636#*#* and setting it to LTe only. But I lose phone calls and if I restart it goes back to WCDMA.
What rom are you using some roms don't have the late icon they have 4g instead. Also double check that you have the right lte apn enabled
Sent from my SGH-I747M using xda app-developers app
offwiththeface said:
What rom are you using some roms don't have the late icon they have 4g instead. Also double check that you have the right lte apn enabled
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Yea I realized that jb roms do not show 4g lte, they just show 4g. I check to see if I have LTE by doing going to the Settings->About Device-> Status and looking at Mobile network type... and/or a speed test as well.
I came from and tried these rom's
Year of The Dragon
Ariel.2.07 [2ETO][Aroma]
WanamLite Smooth,Stable & Battery
Right now I am on Stock TouchWiz Jelly Bean PORT (JellyBean 747 Milestone 3)
I have gotten LTE speeds on every single one of the roms until I reboot phone.
[Update- Best Solution So far]
I found that using the WanamLite Rom http://forum.xda-developers.com/showthread.php?t=1782732 enabled me to get LTE back fairly easy.
Everything is in the Settings->More Settings->Mobile Networks area.
1. I entered in a new Access point and just put Name: "pta" APN: "pta". You can fill out the rest like the MMSC, MMS proxy, etc but I did not need to.
2. Then went to Network Operators and waited for it to search for the networks (takes a minute or two). It showed up for me as two options being Maritime and AT&T. I selected Maritime and registered it. I was not able to register on AT&T and I don't even know what Maritime is. However,
3. I went to Network mode: Set it to GSM/HSPA/LTE(Auto mode). I get LTE every time.
Every time I reboot I can get LTE to work by doing steps 2.) and 3.) and is a little annoying, but better than having to flash a rom every time I reboot and lose LTE. I would like to try and find a solution though where I wouldn't have to do this every time I reboot.
[EDIT] There might be roaming charges, but by disabling Data roaming you should be fine. I believe you might incur charges if you try connecting to this network while on a cruise and have data roaming enabled. I have not done a lot of research on this so I could be wrong.
I have a galaxy nexus
ROM : XenonHD 4.2.2 (tried Stock 4.2.2 for 2 weeks)
Baseband : 19250XXLJ1 (was on earlier ones as well)
Kernel : Stock
Location : Bangalore(India)
Connection : TataDoCoMo
My internet (primarily using 2g, sometimes 3g) and it drops very often.
To enable it, the below steps does NOT word:
1. Toggling flightmode
2. Restart mobile
Only one step works (75% success)
Manually search for network and select network automatically and sometimes to manually select the network.
Please help.
Update: (Strict 2g mode enabled)
I've been sitting in my seat since posting the previous post. Checked my internet and i do not have data connection. Gonna enable it now.
Even manual selection of network dint give me data connection after waiting for 5 mins.
Enabled and disabled flight mode - waited for 5 mins - no go.
Gonna restart and check - last option - no go.
Now i disabled data - strangely, i lost signal for a few second.
Enabled data again - waited for 2 mins - and walah it came.
I dont know on what basis the internet comes and goes like this. It is not humanely possible to do all these steps, just to get the internet enabled. Can anyone help me from this plight.
Can anyone please offer some advice?
You can change rom, and check if it will be fixed.
What kind of network strength do you see in “Status“ page in settings? Post a screenie.
Try a different ROM to be sure it isn‘t a network fault.
Final solution to my data drop issues
wuodland said:
What kind of network strength do you see in “Status“ page in settings? Post a screenie.
Try a different ROM to be sure it isn‘t a network fault.
Click to expand...
Click to collapse
Tried stock as well as PA. So i guess its not a ROM issue
adamczyk777 said:
You can change rom, and check if it will be fixed.
Click to expand...
Click to collapse
Tried stock as well as PA. So i guess its not a ROM issue
I tried a lot of methods and this worked finally. Am on latest radio release I9250XXLJ1. Browse and install it if you are not on it.
Dialed *#*#4636#*#*
selected "Testing"
Selected "Phone Information"
Scrolled down and set the option of "Set preferred network type" as GSM auto (PRL)
Noticed change in GSM Service, GPRS service.
Next time, this dint work tried the below method and finally worked.
At the bottom right corner, the properties option indicated by 3 perpendicular dots took me to change Radio Band.
I tried with the first 5 option with no network coverage and finally AUS Band started giving me uninterrupted data signal.
Success...
hey gang i'm running the latest aokp task650 build on my S3 I747m. Everything works awesome, except i occasionally lose my data connection. I'll notice my connection status bars are gray, and typically a reboot will fix it. I'm sure going into airplane mode and back out from that would re-establish the connection too.
my APN is set correctly, i compared it to a friends nexus which is not rooted.
Right now i'm set as pda.bell.ca
I've flashed the latest bell modem file (that i'm aware of).
Anyone have any suggestions? i'm pretty new to all of this.. not sure what to do to troubleshoot.
itrunner said:
hey gang i'm running the latest aokp task650 build on my S3 I747m. Everything works awesome, except i occasionally lose my data connection. I'll notice my connection status bars are gray, and typically a reboot will fix it. I'm sure going into airplane mode and back out from that would re-establish the connection too.
my APN is set correctly, i compared it to a friends nexus which is not rooted.
Right now i'm set as pda.bell.ca
I've flashed the latest bell modem file (that i'm aware of).
Anyone have any suggestions? i'm pretty new to all of this.. not sure what to do to troubleshoot.
Click to expand...
Click to collapse
I've been having problems lately when I have poor 4G (LTE) signal. My phone would rather hang around on the LTE network with little to no signal before it switches over to 3G. It's been doing this for a while on the Rogers network for me. I can see when I check the battery stats just how much time is spent without signal which is a lot. At work I get full bars 3G when at my desk but very poor 4G. The only thing causing me to loose signal is the poor transition back and forth between the two networks. Changing modems has absolutely no affect on this matter and I've put the APN's and network modes through the ringer with no change either. I've tried it all and nothing improved it. When I walk outside I immediately hit full bars 4G. Just when I'm inside my work and at home, I get poor lingering 4G. I wish the thresholds for when it switches over were better. I usually just turn off LTE all together which sucks but oh well.
I don't think we are the only people with this either. I've read grumblings about others noticing the same thing.
If curious, I'm running the latest CM10.1 nightly with Ktoonsez kernel on the Rogers network in Ottawa.
Interesting, that could very well cooincide with what i'm seeing. I tend to bounce from 4G to H+ or 3G, i wonder if it's trying to hang onto 4G.
Is there a way to force it to stay on 3G? that might be a good test
I was getting the same issue.
I did a factory reset and reinstalled my ROM plus GAPPs and the issue resolved itself.
I am using the latest modern right now and not my bell one. I think it's from a south American carrier, but bit 100% sure of the top of my head. But it is in the current modern thread
Sent from my SGH-I747 using xda app-developers app
Evening all,
I've seen other posts about this, but haven't found a solution that worked for me...
I have a Sprint Samsung Galaxy S3 w/ CM 10.1.2, MD4 baseband, and can't get 4G LTE service.
Settings under "mobile network settings" - data enabled - yes, network mode - LTE / CDMA / EvDo, System Select - Auto: Domestic Roaming, CDMA subscription - NV.
Under about phone - stauts, I see mobile network type - LTE:13, service state - in service, roaming - not roaming, mobile network state - disconnected.
When I turn 4G LTE off, 3G connects and I can browse the internet. Turn LTE back on, and no mobile network.
I've tried rebooting, I've tried flashing the MD4 radio, I've tried reflashing to the stock rom...no success. When I flash stock, I can access 4G but then once I flash CM 10.1.2, only 3G works.
When I was in stock, I did update the PRL.
Seems like all the typical solutions just aren't working...please help!
sjnims said:
Evening all,
I've seen other posts about this, but haven't found a solution that worked for me...
I have a Sprint Samsung Galaxy S3 w/ CM 10.1.2, MD4 baseband, and can't get 4G LTE service.
Settings under "mobile network settings" - data enabled - yes, network mode - LTE / CDMA / EvDo, System Select - Auto: Domestic Roaming, CDMA subscription - NV.
Under about phone - stauts, I see mobile network type - LTE:13, service state - in service, roaming - not roaming, mobile network state - disconnected.
When I turn 4G LTE off, 3G connects and I can browse the internet. Turn LTE back on, and no mobile network.
I've tried rebooting, I've tried flashing the MD4 radio, I've tried reflashing to the stock rom...no success. When I flash stock, I can access 4G but then once I flash CM 10.1.2, only 3G works.
When I was in stock, I did update the PRL.
Seems like all the typical solutions just aren't working...please help!
Click to expand...
Click to collapse
PRL has nothing to do with LTE...it only updates info for 3g/1x. You should do a speedtest on stock and CM and see if there is a difference. Sometimes, my phone will say 4g, but I get 3g speeds. Try a stable version of CM vs a nightly.
lvpre said:
PRL has nothing to do with LTE...it only updates info for 3g/1x. You should do a speedtest on stock and CM and see if there is a difference. Sometimes, my phone will say 4g, but I get 3g speeds. Try a stable version of CM vs a nightly.
Click to expand...
Click to collapse
10.1.2 is the stable version, see the CM website for d2spr (Sprint Samsung Galaxy S3). Can't post the link myself since I'm still considered a newb by xda...
sjnims said:
Evening all,
I've seen other posts about this, but haven't found a solution that worked for me...
I have a Sprint Samsung Galaxy S3 w/ CM 10.1.2, MD4 baseband, and can't get 4G LTE service.
Settings under "mobile network settings" - data enabled - yes, network mode - LTE / CDMA / EvDo, System Select - Auto: Domestic Roaming, CDMA subscription - NV.
Under about phone - stauts, I see mobile network type - LTE:13, service state - in service, roaming - not roaming, mobile network state - disconnected.
When I turn 4G LTE off, 3G connects and I can browse the internet. Turn LTE back on, and no mobile network.
I've tried rebooting, I've tried flashing the MD4 radio, I've tried reflashing to the stock rom...no success. When I flash stock, I can access 4G but then once I flash CM 10.1.2, only 3G works.
When I was in stock, I did update the PRL.
Seems like all the typical solutions just aren't working...please help!
Click to expand...
Click to collapse
Did you do anything after the install and was it a clean install? I'm running your same baseband and have the same version. No problem getting 4g.
Sent from my SPH-L710 using XDA Premium 4 mobile app
GalaxyUser50 said:
Did you do anything after the install and was it a clean install? I'm running your same baseband and have the same version. No problem getting 4g.
Click to expand...
Click to collapse
Before the install, I made sure to do a wipe first, then installed CM, installed GApps, rebooted and started using the phone. No 4G from the get-go.
GalaxyUser50 said:
Did you do anything after the install and was it a clean install? I'm running your same baseband and have the same version. No problem getting 4g.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Verify MD5?
Sent from my SPH-L710 using XDA Premium 4 mobile app
Figured it out. Had to update the APN settings for "APN2 LTE internet" and "APN2 EHRPD internet" such that the apn setting was saved as "n.c4.ispsn" instead of "n.ispsn", 4G LTE working immediately after saving.
sjnims said:
Figured it out. Had to update the APN settings for "APN2 LTE internet" and "APN2 EHRPD internet" such that the apn setting was saved as "n.c4.ispsn" instead of "n.ispsn", 4G LTE working immediately after saving.
Click to expand...
Click to collapse
I just tried this and this caused me to loose data completely... so I changed it back.
jpetrone said:
I just tried this and this caused me to loose data completely... so I changed it back.
Click to expand...
Click to collapse
What I did was from a stock rom (or one where 4G is otherwise working), downloaded an APN config app from the Play Store. The app saved the APN data to an XML file which I then emailed to myself so I could view it on my laptop. I rebooted into recovery, wiped to factory settings and wiped cache, then installed CM 10.1.3 RC2 and gapps. Once the phone restarted I went to the APN settings and made sure each entry matched what I found in the XML file. This is when I saw the last two entries having the different apn setting and updated both. Your settings are quite possibly different.
Where is APN found and what exactly is the name of the app your using?
Sent from my SPH-L710 using XDA Premium 4 mobile app