It is my first forum post and I believe I am posting it in the right section... I tried finding a similar problem to mine, but seemed to only find people that wanted to turn LTE off instead of on. The AT&T Galaxy S3 phone is rooted and I have gone between ics and jb roms and have gotten LTE to work every time. The problem is after I reboot the phone I lose LTE. I get 20+ up 10 down on LTE. After I loose LTE I get around 8 up 4 down.
I have tried.
1.) Re-installing a rom which gives me LTE until I reboot phone.
2.) I have tried installing modems from http://forum.xda-developers.com/showthread.php?t=1831898. If I have lost LTE after reboot, I can (9 out of 10) get LTE to work again after installing a modem. I lose it once I reboot the phone again though and am unable to flash a new modem to get LTE back to working and it won't unless I do 1.) again.
3.) I have made sure apn settings are on the correct pta lte setting. Usually most of the rom's have that already set to begin with.
4.) I have tried the *#2263# to change it to LTE. This WORKS and will reboot my phone into LTE everytime, but I lose being able to make phone calls, etc. From what I understand as well, I am unable to go to 3g/2g after settings LTE ALL and I don't want that either...
It is the only problem I have had with this phone. I notice a lot of times after I install a rom and reboot, it upgrades, and I lose LTE. I install a modem and get LTE back. I reboot phone normally without doing anything to the phone and it upgrades apps again and I lose LTE. That is the only conclusion I can come to as to why I lose LTE after reboot.
terminalerror said:
It is my first forum post and I believe I am posting it in the right section... I tried finding a similar problem to mine, but seemed to only find people that wanted to turn LTE off instead of on. The AT&T Galaxy S3 phone is rooted and I have gone between ics and jb roms and have gotten LTE to work every time. The problem is after I reboot the phone I lose LTE. I get 20+ up 10 down on LTE. After I loose LTE I get around 8 up 4 down.
I have tried.
1.) Re-installing a rom which gives me LTE until I reboot phone.
2.) I have tried installing modems from http://forum.xda-developers.com/showthread.php?t=1831898. If I have lost LTE after reboot, I can (9 out of 10) get LTE to work again after installing a modem. I lose it once I reboot the phone again though and am unable to flash a new modem to get LTE back to working and it won't unless I do 1.) again.
3.) I have made sure apn settings are on the correct pta lte setting. Usually most of the rom's have that already set to begin with.
4.) I have tried the *#2263# to change it to LTE. This WORKS and will reboot my phone into LTE everytime, but I lose being able to make phone calls, etc. From what I understand as well, I am unable to go to 3g/2g after settings LTE ALL and I don't want that either...
It is the only problem I have had with this phone. I notice a lot of times after I install a rom and reboot, it upgrades, and I lose LTE. I install a modem and get LTE back. I reboot phone normally without doing anything to the phone and it upgrades apps again and I lose LTE. That is the only conclusion I can come to as to why I lose LTE after reboot.
Click to expand...
Click to collapse
I am in the same boat as you. I can force LTE with *#*#4636#*#* and setting it to LTe only. But I lose phone calls and if I restart it goes back to WCDMA.
What rom are you using some roms don't have the late icon they have 4g instead. Also double check that you have the right lte apn enabled
Sent from my SGH-I747M using xda app-developers app
offwiththeface said:
What rom are you using some roms don't have the late icon they have 4g instead. Also double check that you have the right lte apn enabled
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Yea I realized that jb roms do not show 4g lte, they just show 4g. I check to see if I have LTE by doing going to the Settings->About Device-> Status and looking at Mobile network type... and/or a speed test as well.
I came from and tried these rom's
Year of The Dragon
Ariel.2.07 [2ETO][Aroma]
WanamLite Smooth,Stable & Battery
Right now I am on Stock TouchWiz Jelly Bean PORT (JellyBean 747 Milestone 3)
I have gotten LTE speeds on every single one of the roms until I reboot phone.
[Update- Best Solution So far]
I found that using the WanamLite Rom http://forum.xda-developers.com/showthread.php?t=1782732 enabled me to get LTE back fairly easy.
Everything is in the Settings->More Settings->Mobile Networks area.
1. I entered in a new Access point and just put Name: "pta" APN: "pta". You can fill out the rest like the MMSC, MMS proxy, etc but I did not need to.
2. Then went to Network Operators and waited for it to search for the networks (takes a minute or two). It showed up for me as two options being Maritime and AT&T. I selected Maritime and registered it. I was not able to register on AT&T and I don't even know what Maritime is. However,
3. I went to Network mode: Set it to GSM/HSPA/LTE(Auto mode). I get LTE every time.
Every time I reboot I can get LTE to work by doing steps 2.) and 3.) and is a little annoying, but better than having to flash a rom every time I reboot and lose LTE. I would like to try and find a solution though where I wouldn't have to do this every time I reboot.
[EDIT] There might be roaming charges, but by disabling Data roaming you should be fine. I believe you might incur charges if you try connecting to this network while on a cruise and have data roaming enabled. I have not done a lot of research on this so I could be wrong.
Related
I finally got LTE locked on with Telus other users confirmed Rogers, AT&T and Bell(thanks) . No service disconnections, even while on wifi.
The problem I see is conflicting settings while flashing roms/modems. This seems to be the only fix. I'm pretty stoked I figured this out because I was about to switch back to my s2x out of frustration.
This took a lot of trial and error, literally had nothing to go on and no where in particular to start. Enjoy.
MAKE SURE YOU ENABLE LTE TOGGLE IN ROM AND HAVE IT ON BEFORE STARTING.
1. Network mode(settings/wireless & networks, more/ mobile networks/ network mode) set to gsm/lte/wcdma
2.Phone setting in test mode *#*#4636#*#* set to lte/gsm
at&t / rogers should select gsm/lte/cdma in test mode
3.Recovery flash latest modem mumLL1
(at&t users flash ucdlk3)
Wipe cache/dalvik
4 . Reset. Give it a couple mins to ask the network for lte.
If you disable Lte(through toggle) and want to use 3g/H+ for battery saving, the only way I've been able to reconnect to it; is to re enable(toggle) and reset, wait a couple mins to connect.
Side note: depending on your 4g service area, it may bounce around 3g/H+ which is normal.
When you place a call it will drop to 3g (the believed reason for this is that the phone knows you won't need heavy data so falls back to ease up on the battery during calls) but will reconnect a couple mins later. Our phones are slow to negotiate Lte connections with the radio testing sockets and network stability before committing, so be patient.
Let me know if this works for you and which network. Thanks.
Modems can be found here
http://forum.xda-developers.com/showthread.php?p=34397816
Re: Fixed service droping and locked LTE
To check if it worked. Go into test mode and it should say Lte in network type.
Xda I747
So does this mean we get no 3g?
Sent from my Mind using Telekinesis!
Yes everything works. I can unselect lte in my toggles and it drops to 3g/hspa. When I re-enabled lte I noticed that I have to make sure in network settings lte/gsm/wdcma is selected and reset phone.
Xda I747
O wow lucky u I can't unselect on Att lol
Sent from my Mind using Telekinesis!
Which rom are you on? Should be up in your toggles. Basically it changes you network settings from cdma/gsm to lte/gsm/cdma. But it conflicts sometimes.
Xda I747
Its there it just doesn't do anything because all the modems on the Att S3 are Rill locked or something so we don't have the option to do it so easily
Sent from my Mind using Telekinesis!
dark_intel you are the man, i finally have 4G
btw works on at&t
countrylife said:
btw works on at&t
Click to expand...
Click to collapse
Just make sure you help spread this thread like a bad STD, this is a huge problem affecting many!
Worked for me on Bell Mobility.
Edit: Running CM10.1 (latest nightly)
No Test Mode using CM10.1 ROM
dark_intel said:
I finally got LTE locked on with Telus other users confirmed Rogers, AT&T and Bell(thanks) . No service disconnections, even while on wifi.
The problem I see is conflicting settings while flashing roms/modems. This seems to be the only fix. I'm pretty stoked I figured this out because I was about to switch back to my s2x out of frustration.
This took a lot of trial and error, literally had nothing to go on and no where in particular to start. Enjoy.
MAKE SURE YOU ENABLE LTE TOGGLE IN ROM AND HAVE IT ON BEFORE STARTING.
1. Network mode(settings/wireless & networks, more/ mobile networks/ network mode) set to gsm/lte/wcdma
2.Phone setting in test mode *#*#4636#*#* set to lte/gsm
at&t / rogers should select gsm/lte/cdma in test mode
3.Recovery flash latest modem mumLL1
(at&t users flash ucdlk3)
Wipe cache/dalvik
4 . Reset. Give it a couple mins to ask the network for lte.
If you disable Lte(through toggle) and want to use 3g/H+ for battery saving, the only way I've been able to reconnect to it; is to re enable(toggle) and reset, wait a couple mins to connect.
Side note: depending on your 4g service area, it may bounce around 3g/H+ which is normal.
When you place a call it will drop to 3g (the believed reason for this is that the phone knows you won't need heavy data so falls back to ease up on the battery during calls) but will reconnect a couple mins later. Our phones are slow to negotiate Lte connections with the radio testing sockets and network stability before committing, so be patient.
Let me know if this works for you and which network. Thanks.
Modems can be found here
http://forum.xda-developers.com/showthread.php?p=34397816
Click to expand...
Click to collapse
Ok sounds promising but unable to get my ATT phone running ROM cyanogenmod10.1 03/04 nightly into Test Mode using the keypad code provided. This does work for stock ROM phones. Do you know any other way to get into the test mode?
Haven't tried stock. Im on cm10..
Xda I747
I'm on CM10.1 not stock.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Yeah I'm pretty sure everyone is using cm10 or aokp. Not sure if stock is having these problems. If they were I'd be on the phone yelling at Telus.
Xda I747
So let me get this right. This fixes the signal jumping around on cm10/aokp ROMs?? That's the only reason I stay on a stock based rom. I'm tired of seeing my signal jump back and fourth from 4g to 3g etc. On stock I always have a rock solid signal. It does not jump around..... Thanks in advance...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Yes for me and others didn't even get 4g, also it would completely go out of service. Now I get steady 4g.
Xda I747
Any alternative way to get into "test mode" other than using the keypad?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Sorry man, I tried looking around for a way. Could be the rom you're on. I know Liquid and Carbon are fine. Probably a couple more that I don't even know of, others have success with.
Xda I747
rpomponio said:
So let me get this right. This fixes the signal jumping around on cm10/aokp ROMs?? That's the only reason I stay on a stock based rom. I'm tired of seeing my signal jump back and fourth from 4g to 3g etc. On stock I always have a rock solid signal. It does not jump around..... Thanks in advance...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
stock lies to and shows 4G all the time, cm10 and show the truth. the s3 sets at 3g until data is needed then transfers to 4g
Running Task650 AOKP ROM and KT747 Kernel.
I wish to stay on 3G/H+ ONLY and not be on LTE.
However my Network Mode is always stuck in: LTE/ GSM/WCDMA after a reboot.
When I try to change it, it only changes for a split second, and then goes back to LTE/ GSM/WCDMA.
I always have to manually: Click Network Operators, wait until they pop up, Select AT&T, and only then can I select WCDMA preferred, allowing me to stay on 3G/H+ only connection.
After every reboot, I must redo these steps in order to get back into the state I want.
Backup your rom. Restore a stock rom go to more settings / network and check the GSM cdma option. Then restore your rom and you'll be free of LTE. Sometimes I lose my LTE after wiping system and that's how I get it back. I guess the opposite should work for you.
Sent from my SAMSUNG-SGH-I747 using XDA Premium HD app
Att locks it out for some reason. but they give the option to iphone users
YoHoJo said:
Running Task650 AOKP ROM and KT747 Kernel.
I wish to stay on 3G/H+ ONLY and not be on LTE.
However my Network Mode is always stuck in: LTE/ GSM/WCDMA after a reboot.
When I try to change it, it only changes for a split second, and then goes back to LTE/ GSM/WCDMA.
I always have to manually: Click Network Operators, wait until they pop up, Select AT&T, and only then can I select WCDMA preferred, allowing me to stay on 3G/H+ only connection.
After every reboot, I must redo these steps in order to get back into the state I want.
Click to expand...
Click to collapse
Running same setup, I also do this upon every single reboot to force edge so I get a good signal in my apartment. Pita sometimes waiting while it searches for the network.
hey gang i'm running the latest aokp task650 build on my S3 I747m. Everything works awesome, except i occasionally lose my data connection. I'll notice my connection status bars are gray, and typically a reboot will fix it. I'm sure going into airplane mode and back out from that would re-establish the connection too.
my APN is set correctly, i compared it to a friends nexus which is not rooted.
Right now i'm set as pda.bell.ca
I've flashed the latest bell modem file (that i'm aware of).
Anyone have any suggestions? i'm pretty new to all of this.. not sure what to do to troubleshoot.
itrunner said:
hey gang i'm running the latest aokp task650 build on my S3 I747m. Everything works awesome, except i occasionally lose my data connection. I'll notice my connection status bars are gray, and typically a reboot will fix it. I'm sure going into airplane mode and back out from that would re-establish the connection too.
my APN is set correctly, i compared it to a friends nexus which is not rooted.
Right now i'm set as pda.bell.ca
I've flashed the latest bell modem file (that i'm aware of).
Anyone have any suggestions? i'm pretty new to all of this.. not sure what to do to troubleshoot.
Click to expand...
Click to collapse
I've been having problems lately when I have poor 4G (LTE) signal. My phone would rather hang around on the LTE network with little to no signal before it switches over to 3G. It's been doing this for a while on the Rogers network for me. I can see when I check the battery stats just how much time is spent without signal which is a lot. At work I get full bars 3G when at my desk but very poor 4G. The only thing causing me to loose signal is the poor transition back and forth between the two networks. Changing modems has absolutely no affect on this matter and I've put the APN's and network modes through the ringer with no change either. I've tried it all and nothing improved it. When I walk outside I immediately hit full bars 4G. Just when I'm inside my work and at home, I get poor lingering 4G. I wish the thresholds for when it switches over were better. I usually just turn off LTE all together which sucks but oh well.
I don't think we are the only people with this either. I've read grumblings about others noticing the same thing.
If curious, I'm running the latest CM10.1 nightly with Ktoonsez kernel on the Rogers network in Ottawa.
Interesting, that could very well cooincide with what i'm seeing. I tend to bounce from 4G to H+ or 3G, i wonder if it's trying to hang onto 4G.
Is there a way to force it to stay on 3G? that might be a good test
I was getting the same issue.
I did a factory reset and reinstalled my ROM plus GAPPs and the issue resolved itself.
I am using the latest modern right now and not my bell one. I think it's from a south American carrier, but bit 100% sure of the top of my head. But it is in the current modern thread
Sent from my SGH-I747 using xda app-developers app
I flashed the Lollipop version of Liquid Smooth on my AT&T G3 and at first everything was working fine, 4G included. After a couple of days 4G disappeared. When this happened it didn't just go to 3G, it lost all data service completely. I originally figured it was the ROM and flashed back to the previous ROM I had using the TWRP backup I made beforehand. Same story, no data service. Figured maybe it was the modem so I flashed a working G3 modem on here, same story. I flashed to a different Lollipop ROM, Resurrection, to see if that fixed anything, nope. This is the ROM I currently have installed. At this point I went and look at the mobile network options and immediately noticed 1 issue, the preferred service was 3G and not LTE. I had an option to change it to LTE but when I actually select LTE it doesn't actually switch, it just stays on 3G.
The one good thing I managed to do was switch the APN to one that worked with 3G. The APN that was originally set was "pta", I can provide the actual APN information if that'll be useful but I figure most ROMs are going to have similarly named APNs. 3G works on at least 2 of the APNs listed for this ROM, "broadband" and "wap.cingular".
I called AT&T and determined that I my 4G service wasn't cut off; not that I really thought it was anyway as that wouldn't explain why I can't even select 4G as a network type. I'm kind of at a loss as to how I just randomly lost 4G access without actually making any changes to the firmware or OS of the phone. I'm also at a loss of how I can get it back.
And I am just sitting here with 3G with speed of 2 Mbps...
No one has any ideas or advice?
Good morning all.
My S9 is completely stock (Android 10) and I don't want to install any custom ROM.
Is there a way to force LTE only (Three network/UK)?
I have tried #*#*4636*#*# but this doesn't work. I have used a couple of apps that have given me access to the settings and changed it to LTE only and this is confirmed in the mobile settings page but the phone keeps reverting back to 4g (not 4g+).
I definitely have 4g+ here because it does connect if I reboot my phone and the download speed is double my normal rate but I cannot get it to stick.
Is there a specific APN I could use?
May I ask you for advice?
Thank you.
SSThing said:
Good morning all.
My S9 is completely stock (Android 10) and I don't want to install any custom ROM.
Is there a way to force LTE only (Three network/UK)?
I have tried #*#*4636*#*# but this doesn't work. I have used a couple of apps that have given me access to the settings and changed it to LTE only and this is confirmed in the mobile settings page but the phone keeps reverting back to 4g (not 4g+).
I definitely have 4g+ here because it does connect if I reboot my phone and the download speed is double my normal rate but I cannot get it to stick.
Is there a specific APN I could use?
May I ask you for advice?
Thank you.
Click to expand...
Click to collapse
You can try with Force LTE Only app on Play Store since Scamsung is kinda blocked the Radio edit part on ONEUI. But be aware that on some firm, Scamsung devices will not be able to make phone call or receive text msg when on force LTE only mode!
That's one of the apps I have used but the phone just reverts back to 4g (even though Network Mode now shows LTE only).
Looks like I have been misunderstanding my network terminologies.
What I am trying to do is force my phone to stay on the 4g+ signal, because I get much better downloads. It is definitely available here because I connect to it for a few minutes if I reboot my phone. My phone is completely static with good, no fluctuations, signal.
Can this be done?