I flashed the Lollipop version of Liquid Smooth on my AT&T G3 and at first everything was working fine, 4G included. After a couple of days 4G disappeared. When this happened it didn't just go to 3G, it lost all data service completely. I originally figured it was the ROM and flashed back to the previous ROM I had using the TWRP backup I made beforehand. Same story, no data service. Figured maybe it was the modem so I flashed a working G3 modem on here, same story. I flashed to a different Lollipop ROM, Resurrection, to see if that fixed anything, nope. This is the ROM I currently have installed. At this point I went and look at the mobile network options and immediately noticed 1 issue, the preferred service was 3G and not LTE. I had an option to change it to LTE but when I actually select LTE it doesn't actually switch, it just stays on 3G.
The one good thing I managed to do was switch the APN to one that worked with 3G. The APN that was originally set was "pta", I can provide the actual APN information if that'll be useful but I figure most ROMs are going to have similarly named APNs. 3G works on at least 2 of the APNs listed for this ROM, "broadband" and "wap.cingular".
I called AT&T and determined that I my 4G service wasn't cut off; not that I really thought it was anyway as that wouldn't explain why I can't even select 4G as a network type. I'm kind of at a loss as to how I just randomly lost 4G access without actually making any changes to the firmware or OS of the phone. I'm also at a loss of how I can get it back.
And I am just sitting here with 3G with speed of 2 Mbps...
No one has any ideas or advice?
Related
Hi, I was hoping someone here may be able to help me out with this problem. Last week I had a weird issue where my GPS signal stopped working, text messages and phone calls weren't coming into the phone. I've since been able to correct that issue with flashing to a clean Sense based ROM, and updating the profile and PRL, but now I can't seem to pickup 3G EVDO signal, only 2G 1xRTT..
My phone is(was) rooted and flashed with Calkulin's EViO 2 v1.77, most current radios. I thought maybe something got messed up, and since 1.8 was out, I flashed to that. Same issue, updated the radio from his package, same thing. Then I thought, ok, maybe something with this rom is messed up(unlikely, but I was grasping at straws at this point), so I flashed to a different rom, think it was sprint lovers.. same thing. Flashed to CM7, same. Unrooted and flashed back to stock, took it into Sprint, which they did a hard reset and told me since it shows the 3G icon in the top bar, it is on 3G and working fine. This is ofcourse bull**** since the Evo shows that 3G icon even if its on 1xRTT signal..Sprint tossing out wrong info, shocking I know. I've used Antennas and OpenSignal apps to show that it is indeed connecting to the 1xRTT signal. Downloading anything on the phone is ofcourse slow too, I've had google maps updating now for about 15 minutes, and it is 5.86MB.
Would anybody have some suggestions of what I can try to get the 3G radio working again?
Anybody have a suggestion of what I could try here? I've changed my PRL to the Verizon one, which gives the same results. Still having the same problem.
ya its calkulin's 1.8. the new extended mobile data menu hack has a messed up default that sets it to evdo only by default, messing up everything else. switching roms doenst help. go back to calk's 1.8 and type in the dialer ##3282# select view only and make sure mode of operation is on automatic.
It is my first forum post and I believe I am posting it in the right section... I tried finding a similar problem to mine, but seemed to only find people that wanted to turn LTE off instead of on. The AT&T Galaxy S3 phone is rooted and I have gone between ics and jb roms and have gotten LTE to work every time. The problem is after I reboot the phone I lose LTE. I get 20+ up 10 down on LTE. After I loose LTE I get around 8 up 4 down.
I have tried.
1.) Re-installing a rom which gives me LTE until I reboot phone.
2.) I have tried installing modems from http://forum.xda-developers.com/showthread.php?t=1831898. If I have lost LTE after reboot, I can (9 out of 10) get LTE to work again after installing a modem. I lose it once I reboot the phone again though and am unable to flash a new modem to get LTE back to working and it won't unless I do 1.) again.
3.) I have made sure apn settings are on the correct pta lte setting. Usually most of the rom's have that already set to begin with.
4.) I have tried the *#2263# to change it to LTE. This WORKS and will reboot my phone into LTE everytime, but I lose being able to make phone calls, etc. From what I understand as well, I am unable to go to 3g/2g after settings LTE ALL and I don't want that either...
It is the only problem I have had with this phone. I notice a lot of times after I install a rom and reboot, it upgrades, and I lose LTE. I install a modem and get LTE back. I reboot phone normally without doing anything to the phone and it upgrades apps again and I lose LTE. That is the only conclusion I can come to as to why I lose LTE after reboot.
terminalerror said:
It is my first forum post and I believe I am posting it in the right section... I tried finding a similar problem to mine, but seemed to only find people that wanted to turn LTE off instead of on. The AT&T Galaxy S3 phone is rooted and I have gone between ics and jb roms and have gotten LTE to work every time. The problem is after I reboot the phone I lose LTE. I get 20+ up 10 down on LTE. After I loose LTE I get around 8 up 4 down.
I have tried.
1.) Re-installing a rom which gives me LTE until I reboot phone.
2.) I have tried installing modems from http://forum.xda-developers.com/showthread.php?t=1831898. If I have lost LTE after reboot, I can (9 out of 10) get LTE to work again after installing a modem. I lose it once I reboot the phone again though and am unable to flash a new modem to get LTE back to working and it won't unless I do 1.) again.
3.) I have made sure apn settings are on the correct pta lte setting. Usually most of the rom's have that already set to begin with.
4.) I have tried the *#2263# to change it to LTE. This WORKS and will reboot my phone into LTE everytime, but I lose being able to make phone calls, etc. From what I understand as well, I am unable to go to 3g/2g after settings LTE ALL and I don't want that either...
It is the only problem I have had with this phone. I notice a lot of times after I install a rom and reboot, it upgrades, and I lose LTE. I install a modem and get LTE back. I reboot phone normally without doing anything to the phone and it upgrades apps again and I lose LTE. That is the only conclusion I can come to as to why I lose LTE after reboot.
Click to expand...
Click to collapse
I am in the same boat as you. I can force LTE with *#*#4636#*#* and setting it to LTe only. But I lose phone calls and if I restart it goes back to WCDMA.
What rom are you using some roms don't have the late icon they have 4g instead. Also double check that you have the right lte apn enabled
Sent from my SGH-I747M using xda app-developers app
offwiththeface said:
What rom are you using some roms don't have the late icon they have 4g instead. Also double check that you have the right lte apn enabled
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Yea I realized that jb roms do not show 4g lte, they just show 4g. I check to see if I have LTE by doing going to the Settings->About Device-> Status and looking at Mobile network type... and/or a speed test as well.
I came from and tried these rom's
Year of The Dragon
Ariel.2.07 [2ETO][Aroma]
WanamLite Smooth,Stable & Battery
Right now I am on Stock TouchWiz Jelly Bean PORT (JellyBean 747 Milestone 3)
I have gotten LTE speeds on every single one of the roms until I reboot phone.
[Update- Best Solution So far]
I found that using the WanamLite Rom http://forum.xda-developers.com/showthread.php?t=1782732 enabled me to get LTE back fairly easy.
Everything is in the Settings->More Settings->Mobile Networks area.
1. I entered in a new Access point and just put Name: "pta" APN: "pta". You can fill out the rest like the MMSC, MMS proxy, etc but I did not need to.
2. Then went to Network Operators and waited for it to search for the networks (takes a minute or two). It showed up for me as two options being Maritime and AT&T. I selected Maritime and registered it. I was not able to register on AT&T and I don't even know what Maritime is. However,
3. I went to Network mode: Set it to GSM/HSPA/LTE(Auto mode). I get LTE every time.
Every time I reboot I can get LTE to work by doing steps 2.) and 3.) and is a little annoying, but better than having to flash a rom every time I reboot and lose LTE. I would like to try and find a solution though where I wouldn't have to do this every time I reboot.
[EDIT] There might be roaming charges, but by disabling Data roaming you should be fine. I believe you might incur charges if you try connecting to this network while on a cruise and have data roaming enabled. I have not done a lot of research on this so I could be wrong.
For the past week and a half, I've had internet issues when I'm on 3g. It works fine on wifi. I've switched between ROMs, kernels, modems, etc. I'm currently on Goodness with the MA6 firmware modem AIO and the anthrax kernel. I've tried updating the profile & prl. I have between 2-4 bars of 3g and yet it still gives me the webpage not available sign. I tried clearing the cache/ fixing the permissions. But the internet simply won't work. I'm in Maryland, between Baltimore and Frederick. What could the problem be? Maybe the phone itself is defective or Sprint's network died in my area?
I'd see if they're doing work i that area. I know in areas of Baltimore 4G is there, I believe. You could try using build prop tweaks ect for signal if you wanted.
Zin0 said:
For the past week and a half, I've had internet issues when I'm on 3g. It works fine on wifi. I've switched between ROMs, kernels, modems, etc. I'm currently on Goodness with the MA6 firmware modem AIO and the anthrax kernel. I've tried updating the profile & prl. I have between 2-4 bars of 3g and yet it still gives me the webpage not available sign. I tried clearing the cache/ fixing the permissions. But the internet simply won't work. I'm in Maryland, between Baltimore and Frederick. What could the problem be? Maybe the phone itself is defective or Sprint's network died in my area?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1815580&page=3
http://forum.xda-developers.com/showthread.php?t=2154344
Misery loves company.
The 2nd post is a thread I started regarding the same problem. The first post is to a thread I thought could help me. I tried some things mentioned in there but none of them worked. Then someone posted in the thread who is having the same problem.
Here's what I've been running into and what I tried. I am on FreeGS3, Anthrax kernel, and recently updated to MA6 when I started having problems. I use a battery saver so my internet connection turns off when my screen is off. I started noticing a week or so ago that when I woke up my phone, the 3g icon would appear but only the up arrow flashed. The download arrow wasn't doing anything. I would toggle it off and on and eventually get it to work. I'm in the Raleigh-Durham area and we are just starting to get LTE. My 4G works whenever I go through 4G areas and my wifi works. I have restored a working backup, wiped my phone, flashed back to stock unrooted, called Sprint (they refreshed my signal and had me do an OTA activation), manually changed my PRL, upgraded to MA6, updated profile (when I could get it work).........and I think that about sums it up. The one thing I've noticed is my phone works flawlessly when the network mode is set to CDMA. At this point I'm clueless. I really don't think it's a phone issue because 3g works on CDMA. It's like when the phone is set to CDMA/LTE and it doesn't have an LTE signal, it doesn't know what to do. That up arrow flashes in such a rhythm that it's like the code is stuck in a loop.
hey gang i'm running the latest aokp task650 build on my S3 I747m. Everything works awesome, except i occasionally lose my data connection. I'll notice my connection status bars are gray, and typically a reboot will fix it. I'm sure going into airplane mode and back out from that would re-establish the connection too.
my APN is set correctly, i compared it to a friends nexus which is not rooted.
Right now i'm set as pda.bell.ca
I've flashed the latest bell modem file (that i'm aware of).
Anyone have any suggestions? i'm pretty new to all of this.. not sure what to do to troubleshoot.
itrunner said:
hey gang i'm running the latest aokp task650 build on my S3 I747m. Everything works awesome, except i occasionally lose my data connection. I'll notice my connection status bars are gray, and typically a reboot will fix it. I'm sure going into airplane mode and back out from that would re-establish the connection too.
my APN is set correctly, i compared it to a friends nexus which is not rooted.
Right now i'm set as pda.bell.ca
I've flashed the latest bell modem file (that i'm aware of).
Anyone have any suggestions? i'm pretty new to all of this.. not sure what to do to troubleshoot.
Click to expand...
Click to collapse
I've been having problems lately when I have poor 4G (LTE) signal. My phone would rather hang around on the LTE network with little to no signal before it switches over to 3G. It's been doing this for a while on the Rogers network for me. I can see when I check the battery stats just how much time is spent without signal which is a lot. At work I get full bars 3G when at my desk but very poor 4G. The only thing causing me to loose signal is the poor transition back and forth between the two networks. Changing modems has absolutely no affect on this matter and I've put the APN's and network modes through the ringer with no change either. I've tried it all and nothing improved it. When I walk outside I immediately hit full bars 4G. Just when I'm inside my work and at home, I get poor lingering 4G. I wish the thresholds for when it switches over were better. I usually just turn off LTE all together which sucks but oh well.
I don't think we are the only people with this either. I've read grumblings about others noticing the same thing.
If curious, I'm running the latest CM10.1 nightly with Ktoonsez kernel on the Rogers network in Ottawa.
Interesting, that could very well cooincide with what i'm seeing. I tend to bounce from 4G to H+ or 3G, i wonder if it's trying to hang onto 4G.
Is there a way to force it to stay on 3G? that might be a good test
I was getting the same issue.
I did a factory reset and reinstalled my ROM plus GAPPs and the issue resolved itself.
I am using the latest modern right now and not my bell one. I think it's from a south American carrier, but bit 100% sure of the top of my head. But it is in the current modern thread
Sent from my SGH-I747 using xda app-developers app
So last weekend I started noticing issues with LTE. I was on the 7/18 build of Mahdi at that time. So I decided it was just a bug in Mahdi but after I flashed back to stock ZVC rooted Odex, the problem persisted. On AOSP, I'd get the LTE icon but no connection to the internet. Now, I'll only ever connect to 3g (or WiFi of course). Then, scared, I did a tot to ZVC and fiddled around a bit trying to get LTE back. Now, I did a tot to ZVC again, then updated to ZVD. I spent a day unrooted and whilst driving to where I needed to be, checked if I had finally connected to LTE. No luck. I've now rooted, and updated the PRL and profile COUTLESS times, and fooled around in the mobile data settings a lot. Under Settings/Mobile Networks/4g settings, it shows my network provider as: n.ispsn. Under Settings/Mobile Networks, changing the Network mode from LTE/CDMA to Global or Global to LTE/CDMA doesn't do anything. Help? I'm in Chicago, and obviously I have an LS980 on Sprint. Also as a side note, the signal bars tend to randomly display an X over them as if I was in a remote place. I don't get service where I usually do. My phone is refurbished, after I got my original G2 replaced a couple months back.
Any help is appreciated, thank you.
Williek113 said:
So last weekend I started noticing issues with LTE. I was on the 7/18 build of Mahdi at that time. So I decided it was just a bug in Mahdi but after I flashed back to stock ZVC rooted Odex, the problem persisted. On AOSP, I'd get the LTE icon but no connection to the internet. Now, I'll only ever connect to 3g (or WiFi of course). Then, scared, I did a tot to ZVC and fiddled around a bit trying to get LTE back. Now, I did a tot to ZVC again, then updated to ZVD. I spent a day unrooted and whilst driving to where I needed to be, checked if I had finally connected to LTE. No luck. I've now rooted, and updated the PRL and profile COUTLESS times, and fooled around in the mobile data settings a lot. Under Settings/Mobile Networks/4g settings, it shows my network provider as: n.ispsn. Under Settings/Mobile Networks, changing the Network mode from LTE/CDMA to Global or Global to LTE/CDMA doesn't do anything. Help? I'm in Chicago, and obviously I have an LS980 on Sprint. Also as a side note, the signal bars tend to randomly display an X over them as if I was in a remote place. I don't get service where I usually do. My phone is refurbished, after I got my original G2 replaced a couple months back.
Any help is appreciated, thank you.
Click to expand...
Click to collapse
I would try to flash a radio file by itself. From what I recall radios don't get updated in ROM flash, not certain on a .tot. You may try to poke around carefully in the service menu *#*#4636#*#*
wolfclan68 said:
I would try to flash a radio file by itself. From what I recall radios don't get updated in ROM flash, not certain on a .tot. You may try to poke around carefully in the service menu *#*#4636#*#*
Click to expand...
Click to collapse
*#*#4636#*#* doesn't have any affect in the dialer. Hmm, do you know where I could find a separate radio zip?
Okay so I got into the Data menu through the dialer, I looked through all the settings, although I couldn't change them because I don't have my MSL handy. None of them looked bad, so that doesn't seem to be where the issue lies. I also tried to flash the ZVC_Radio_Full from the ZVA to ZVC thread with just a soft brick. I wasnt able to figure out how to just flash a radio image but I did tot to ZV7 and updated up to ZVC, which should have included at least one radio upgrade (I'm not entirely sure how many of them changed the radio, or if it was just ZV8>ZVA. No success. I was able to "connect" to LTE before a profile update, but I couldnt open a webpage or anything that actually uses internet.
Next, I went back to mahdi 7/18, which seemed to be where my problems began (no hate to the dev). After fiddling with the settings more, I have yet to connect to LTE still. I'm on "LTE recommended" under Settings/Mobile Networks/Preferred Networks. In the *#*#4636#*#* menu under Phone Information/Preferred Network Type I'm: "LTE/CDMA auto (PRL)".
Still having issues. Any help is appreciated