If I really really want to do a super duper factory reset. What should I do? I'm on ARHD 18.2 and hboot 1.39. 3.14.401.31 5.1204.162.29
Back to basic as far as i can...
I have issues with my wifi, I have to restart the wifi after awhile. My screen behave strange and in non responsive from time to time. The battery drains in like 8 hours, earlier it was ok for like 36 hours, that was i think when I used hboot 1.31. All this errors appeared when I went for hboot 1.39 I think.
I understand that downgrading hboot is not possible. But everything else?!?
Thanks for assisting.
Run a RUU for a super duper factory reset ruu.androidfiles.org
I guess you need to do the fastboot command
Fastboot getvar version-main
I think that the main version posted by henrik is from the custom rom that is based on 3.14.401.....
RUU failed.
Shoud I do anything pre RUU?
Fastboot something? Relock?
Yes the bootloader needs to be relocked. And you have to run the ruu with administrator rights. And keep the phone in the bootloader/fastboot usb mode
Are you sure you got the right ruu. Did you do
Fastboot getvar version-main
And did it came up with the same number you posted in the first post ?
Mr Hofs said:
Yes the bootloader needs to be relocked. And you have to run the ruu with administrator rights. And keep the phone in the bootloader/fastboot usb mode
Are you sure you got the right ruu. Did you do
Fastboot getvar version-main
And did it came up with the same number you posted in the first post ?
Click to expand...
Click to collapse
Yes same number.
When i lock it it will only boot to bootloader. To run RUU I need to get in to the phone.
Should I do anyting else in fastboot?
Regards
/Henrik
You can run the ruu in fastboot mode too.
Yeah like i said in my previous post
Thanks allot, now i'm back to scratch. The issues with the touchpanel is still there, the top part is not consistent sometime it works and sometime it doesn't. We will see if the batterylife is better.
Thanks again.
/Henrik
No problem mate, i hope it Works out fine for you in the end :thumbup:
CASE CLOSED !
Related
Hi
I've a problem i need to flash a RUU to send back my HOX to HTC so i run "fastboot getvar version-main" and i get 3.14.401.619 i chose
this RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27_Radio_5.1204.162.29_release_298897_signed.exe
but when i run it it never end so i unplug the usb cable after one hour and it's like nothing happen my HBoot is 1.31 my CID HTC_203
Can someone help on how to flash the right ruu
(ps: i didn't forgot to relock the bootloader)
What's your Cid ?
Fastboot oem readcid
Maybe its a branded ruu you need ?
And did u run the ruu with admin rights from pc
My CID is HTC_203 and yes i run it as admin
don't know what to do :s
Try to do it again, battery has enough power ?
Usb 2.0 port, not a Usb 3.0 port in use. Have seen problems using a 3.0 USB port !
Using the charger cable (original one)
Solved by flashing the last RUU
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed.exe
thanks
:thumbup: enjoy
I also have a problem, after I run the ruu it says signature error.
CID: HTC__102
version-main: 3.14.401.27
HBOOT 1.36.0000
What am I doing wrong?
Did u try the ruu that I posted about 2 post earlier ?
Solved
Mr Hofs said:
Did u try the ruu that I posted about 2 post earlier ?
Click to expand...
Click to collapse
Well, I'll be damned, that one worked. Thanks!
I still don't understand why the newer one didn't though.
In some cases a second time will work don't know why ! ... Glad it worked :thumbup:
2 successes in one evening ! You guys made my day
Cases are closed !!!
I ordered a used HTC One X and it arrived today, needed to get a micro sim for it so i bought it, however whenever I tried to enter the sim unlock code on start up it kept saying request unsuccessful. After searching on this forum I found that the problem was because the phone had already been flashed on cyanogenmod 10, I was told that I would have to flash to a 'sense' rom for me to be able to unlock the sim. Having done this now I have managed to possibly brick my phone.
It gets passed the HTC logo and the jellybean loading screen keeps looping (jellybeans floating around screen). I downloaded the all-in-one kit and tried flashing stock recovery and kernal, and it managed to get past the booting screen to a screen showing that android is updating. however once it got to updating the last app it got stuck again. since then i havent managed to get back on that screen, just a continuous bootloop.
the phone originally was on Android Jelly Bean 4.1.2, with cyanogenmod 10(i think it was 10)
I tried flashing it to this http://forum.xda-developers.com/showthread.php?t=1546970
UNLOCKED
endeavoru pvt ship s-on RL
HBOOT-0.96.0000
CPLD-NONE
MICROP-NONE
RADIO-1.1204.105.14
the CID is ORANG001
perhaps I could fastboot an RUU?
Would really appreciate any help you could offer :crying:
also did the following
"If you have stock recovery
Download a Custom Recovery
Then flash it with the command:
fastboot flash recovery recovery-clockwork-touch-5.8.3.1-endeavoru.img
Now you can flash a new ROM or nandroid backup"
now i cant even get to recovery. trying to flash recovery from all-in-one kit and it just says "waiting for device" now
Do you know fastboot commands
Phone in bootloader/fastboot usb mode
Fastboot getvar version-main
Mr Hofs said:
Do you know fastboot commands
Phone in bootloader/fastboot usb mode
Fastboot getvar version-main
Click to expand...
Click to collapse
Yes, problem is now whenever I type in these commands I just get "waiting for device". I dont think my laptop is recognising the phone anymore, theres no sound playing when plugged in/out anymore
Were you aware that the phone already had CM10?
yash777 said:
Were you aware that the phone already had CM10?
Click to expand...
Click to collapse
Yea, I didnt think it would have had any issues with the sim card like that
Mr Hofs said:
Do you know fastboot commands
Phone in bootloader/fastboot usb mode
Fastboot getvar version-main
Click to expand...
Click to collapse
I re-installed HTC Sync and managed to get connected to fastboot again
the version is 1.29.061.11
ive also managed to get CWM recovery working again
Here is the link to the ruu you need
http://androidfiles.org/ruu/securek...Radio_1.1204.105.14_release_260736_signed.exe
Install :
Put the phone in fastboot usb mode and lock the bootloader
Fastboot oem lock
Keep the phone in fastboot usb mode and right click the ruu on the pc and run it with admin rights !
It will bring back the phone to full stock and you will also be able to update the phone to software 2.17 ICS and after that to software 3.14 JB
Note : it will wipe the whole phone so back up stuff if needed :thumbup:
I managed to get it working in the end by doing that same method, took me forever to find the right ruu!
Thanks for your help :good:
Hey guys! It seems I've run into the same problem but unfortunately this fix is not applicable to me because my hboot is 3.16, which means there is no RUU available for my device! Can anyone help me??
Hi , I just upgrade my Hboot from 1.12 to 1.39 and flash a new ROM and My phone is not charging anymore..
I have tried other Roms but it still same results and it only charge when its turned off ?
cidnum: HTC__001 ... anyone ?
Charge the phone to full when its off ! Then boot into the bootloader. Lock the bootloader
Fastboot oem lock
Keep the phone in the bootloader and run this RUU from the pc with administrator rights !
http://androidfiles.org/ruu/securek...Radio_5.1204.162.29_release_302015_signed.exe
It will bring you back to full stock JB ..... see if the problem is gone after this.
Note : it will delete everything so backup what's needed, even the sdcard to be sure !!!
Mr Hofs said:
Charge the phone to full when its off ! Then boot into the bootloader. Lock the bootloader
Fastboot oem lock
Keep the phone in the bootloader and run this RUU from the pc with administrator rights !
http://androidfiles.org/ruu/securek...Radio_5.1204.162.29_release_302015_signed.exe
It will bring you back to full stock JB ..... see if the problem is gone after this.
Note : it will delete everything so backup what's needed, even the sdcard to be sure !!!
Click to expand...
Click to collapse
thank you ill do it and see what happen
Hi guys.Im new to HTC one X.I just bought an HTC one X from e-bay and it came pre rooted thought the phone looks brandnew.I tried to insert a sim and my phone keeps on showing an error saying process.com.android.phone is stopped and it does not show any signal bars.After several reboots sometimes signal bars do appear sometimes.But i am unable to make or recieve calls as my phone app keeps on force closing. My phone has stock ICS.
So if i flash a stock RUU will the problem be solved or is there anything that i can do to make my phone work?thank you.
I would recommend flashing a stock RUU.
You would need to check your CID and whether your bootloader is locked or unlocked. To do this, you can hold power+volume up down buttons to reboot phone to bootloader and see the first line.
The RUU you flash must match your CID.
Recommended for you:
RUUs: http://forum.xda-developers.com/wiki/HTC_One_X#Total_recovery_-_flashing_a_RUU_to_completely_restore_your_phone
About CID and other info: http://forum.xda-developers.com/showthread.php?t=2031359
Power button + volume down button (not up)
And post the outcome of this fastboot command
Fastboot getvar version-main
Tony Tan said:
I would recommend flashing a stock RUU.
You would need to check your CID and whether your bootloader is locked or unlocked. To do this, you can hold power+volume up down buttons to reboot phone to bootloader and see the first line.
The RUU you flash must match your CID.
Recommended for you:
RUUs: http://forum.xda-developers.com/wiki/HTC_One_X#Total_recovery_-_flashing_a_RUU_to_completely_restore_your_phone
About CID and other info: http://forum.xda-developers.com/showthread.php?t=2031359
Click to expand...
Click to collapse
Thanks for the help(i hit the thanks button too
one more question.Mine has got super CID.
So what RUU should i flash?
You mean Super CID 11111111?
Did you check with:
fastboot getvar cid
fastboot oem readcid
If my understanding is correct, you should be able to flash any RUU with any CID in that case.
Just make sure the RUU you are flashing is for your device model (HTC One X Endeavor, not HTC One XL or anything else)
I have never owned a supercid device though, so you might want to confirm with someone else.
For RUU downloads:
http://forum.xda-developers.com/showthread.php?t=2094113
http://forum.xda-developers.com/showthread.php?t=2189048
Credits to Mr Hofs for helping me find the links.
nuwanmw1988 said:
Thanks for the help(i hit the thanks button too
one more question.Mine has got super CID.
So what RUU should i flash?
Click to expand...
Click to collapse
Tony Tan said:
You mean Super CID 111111111?
Did you check with:
fastboot getvar cid
fastboot oem readcid
If my understanding is correct, you should be able to flash any RUU with any CID in that case.
Just make sure the RUU you are flashing is for your device model (HTC One X Endeavor, not HTC One XL or anything else)
I have never owned a supercid device though, so you might want to confirm with someone else.
For RUU downloads:
http://forum.xda-developers.com/showthread.php?t=2094113
http://forum.xda-developers.com/showthread.php?t=2189048
Credits to Mr Hofs for helping me find the links.
Click to expand...
Click to collapse
yup..its 11111111
Then you can flash any ruu basically !
Thanx guys..my phone is back to life now.
Sent from my HTC One X using xda premium
Hi. I wanted to go back to stock. So according to some link I referred to:
I typed in cmd
fastboot getvar version-main to know my version. It showed 1.29.401.11
My hboot is 1.39.
I downloaded the RUU: ruu_endeavor_u_jb_45_s_htc_europe_3.14.401.27_radio_5.1204.162.29_release_298897_signed
However, when I ran the RUU, it says the update could not be done "Error: 155"
I don't know what went wrong. Urgent help needed guys. My phone is still stuck on the black screen with htc logo in the middle. And if I run out of battery, it's going to be a big problem.
Please check this fastboot command:
fastboot getvar cid
And let me know what you will get back.
Issue Resolved
Hello all,
The issue has been resolved now. I was trying to run the 3.14.401.27 RUU, but it wasn't working. When I ran the 3.14.401.31 RUU, it worked.
It was pointed out to me by Mr. Hofs that the .27 RUU is for 1.36 HBOOT and the .31 RUU is for 1.39 HBOOT.
Thank you so much, Mr. Hofs, for pointing this out to me.:good: