Hi
I've a problem i need to flash a RUU to send back my HOX to HTC so i run "fastboot getvar version-main" and i get 3.14.401.619 i chose
this RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27_Radio_5.1204.162.29_release_298897_signed.exe
but when i run it it never end so i unplug the usb cable after one hour and it's like nothing happen my HBoot is 1.31 my CID HTC_203
Can someone help on how to flash the right ruu
(ps: i didn't forgot to relock the bootloader)
What's your Cid ?
Fastboot oem readcid
Maybe its a branded ruu you need ?
And did u run the ruu with admin rights from pc
My CID is HTC_203 and yes i run it as admin
don't know what to do :s
Try to do it again, battery has enough power ?
Usb 2.0 port, not a Usb 3.0 port in use. Have seen problems using a 3.0 USB port !
Using the charger cable (original one)
Solved by flashing the last RUU
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed.exe
thanks
:thumbup: enjoy
I also have a problem, after I run the ruu it says signature error.
CID: HTC__102
version-main: 3.14.401.27
HBOOT 1.36.0000
What am I doing wrong?
Did u try the ruu that I posted about 2 post earlier ?
Solved
Mr Hofs said:
Did u try the ruu that I posted about 2 post earlier ?
Click to expand...
Click to collapse
Well, I'll be damned, that one worked. Thanks!
I still don't understand why the newer one didn't though.
In some cases a second time will work don't know why ! ... Glad it worked :thumbup:
2 successes in one evening ! You guys made my day
Cases are closed !!!
Related
I have unlocked my phone via htc dev, and i installed the 2.17 RUU and i have problems with my phone and i would like to change the cid to super cid (mine is ht_j15 at the moment), i would like to revert to 1.29 firmware via ruu but it gives me an error because my bootloader is an updated version, so is it possible to downgrade to the old bootloader version as well as get super cid, please help
cheers
The short answers for the three questions is no, no, and no.
but i have s-off :s, and will these no's ever change to yes ???
XD XD
Have you tried the fastboot command (In fastboot):
fastboot oem writecid 11111111
If thats succesfull then you should be able to flash any rom.
Note down your original CID for warranty by issueing the following command in bootloader:
fastboot getvar cid
Why would you use HTCdev if you're s-off?
It's useless
Sent from my HTC One X
MarylandCookie said:
Have you tried the fastboot command (In fastboot):
fastboot oem writecid 11111111
If thats succesfull then you should be able to flash any rom.
Note down your original CID for warranty by issueing the following command in bootloader:
fastboot getvar cid
Click to expand...
Click to collapse
I get none when I issue fastboot getvar cid, is this equivalent as having the 11111111 set ?
Have you actually got s-off or have you just unlocked with htcdev? There 2 different things
Sent from my HTC One X using xda premium
P00r said:
I get none when I issue fastboot getvar cid, is this equivalent as having the 11111111 set ?
Click to expand...
Click to collapse
No this is what happens when you have the bootloader unlocked,
Try fastboot oem readcid
Sent from my HTC One X
thunder07 said:
Why would you use HTCdev if you're s-off?
It's useless
Sent from my HTC One X
Click to expand...
Click to collapse
Huh~ never mentioned OP singanture's stating s-off.
Yes, I think he is mistaking he had s-off device through htcdev.
holy s***, am sorry guys i didn't see that its still s-on, but i sent a message to htc dev about not getting s-off and some harsh words as well. hope they will reply.
sorry guys am such an idiot
viper619 said:
holy s***, am sorry guys i didn't see that its still s-on, but i sent a message to htc dev about not getting s-off and some harsh words as well. hope they will reply.
sorry guys am such an idiot
Click to expand...
Click to collapse
You had mistaken some facts, HTC never providings any official s-off. The htcdev.com offers you to unlock bootloader, it had limitations and you're not getting s-off through it.
ya sry about that . btw I contacted htc dev and to my surprise they told me to check the internet forums for ways to s-off the device (i did mention to them that the device s-off ed now is the snapdragon varient) and they said they have no intentions of releasing the s-off :S.
hey
how do i know which RUU i need
and how do i flash my hboot
currently:
ENDEaVORU PVT SHIP S-ON RL
HBOOT-0.95.0000
CPLD-None
MICROP-none
RaDIO-None
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH : OFF
Do the 2 fastboot commands
Fastboot getvar version-main
Fastboot oem readcid
And search for the matching ruu on htcruu.com or on file factory.....
Mr Hofs said:
Do the 2 fastboot commands
Fastboot getvar version-main
Fastboot oem readcid
And search for the matching ruu on htcruu.com or on file factory.....
Click to expand...
Click to collapse
thnx, found my ruu
and how do i flash my ruu?
does my hboot flash at the same time as i flash my RUU?
Put the phone in fastboot USB mode and lock the bootloader
Fastboot oem lock
Keep the phone in fastboot USB mode and run the ruu WITH admin rights
It will update everything , and it will put the phone to stock !
Mr Hofs said:
Put the phone in fastboot USB mode and lock the bootloader
Fastboot oem lock
Keep the phone in fastboot USB mode and run the ruu WITH admin rights
It will update everything , and it will put the phone to stock !
Click to expand...
Click to collapse
i'm trying to instal the RUU but my battery is lower then 30%
i'm using this batch file to charge (http://forum.xda-developers.com/showthread.php?t=1658084)
but it wont get past 3717mV, well it will but it wil reaallyy long to get my battery 30%
someone said that if you unlock it and instal clockworkmod recovery 3.8.4.0 it will charge while in recovery, but it doens't work.
do you know another way of charging my battery?
Nope in this case it's or the script or the recovery 5.8.4.0....don't know if you mean the same recovery.....but this is the one you need to charge in recovery
http://db.tt/Krlm4dPs
Mr Hofs said:
Nope in this case it's or the script or the recovery 5.8.4.0....don't know if you mean the same recovery.....but this is the one you need to charge in recovery
http://db.tt/Krlm4dPs
Click to expand...
Click to collapse
yes i mean the same recovery, but it won't charge while in recovery, no light and the voltage doesnt go up when checking with the batch file
i flashed your recovery, but i don't see a difference so i guess it's the same one
EDIT: just found this version of CMWrecovery http://forum.xda-developers.com/showthread.php?t=1941630, and now my htc one x is charging while in recovery
That's great, mine does charge actually in the 5.8.4.0 recovery.....so that's not the same or everybody....
Oke well let charge now ! :thumbup:
Mr Hofs said:
That's great, mine does charge actually in the 5.8.4.0 recovery.....so that's not the same or everybody....
Oke well let charge now ! :thumbup:
Click to expand...
Click to collapse
i tried to restore but it said that my ruu is wrong
i'm using RUU_endeavor_u_ics_40_htc_europe_1.29.401.11_radio_1.1204.105.14_release_260491_signed.exe
which Ruu do i need?
ENDEaVORU PVT SHIP S-ON RL
HBOOT-0.95.0000
CPLD-None
MICROP-none
RaDIO-None
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH : OFF
EDIT:
forgot to relock my HOX, nevermind hahaha
it now is back to stock.
thnx for your help
my cid is HTC__044 that is okay
but
fastboot getvar version-main - gives:
version-main: 9.29.709.7
what ruu should i use? asking because i can't upgrade hboot - 1.12.0000 atm
and ruu should be higher number that current? mean like 9.30.709.7?
shoo said:
my cid is HTC__044 that is okay
but
fastboot getvar version-main - gives:
version-main: 9.29.709.7
what ruu should i use? asking because i can't upgrade hboot - 1.12.0000 atm
and ruu should be higher number that current? mean like 9.30.709.7?
Click to expand...
Click to collapse
Never ever seen that version number !!! It should start with 1.29 or 2.17
Are you sure you have the international HTC one x ??? What does the top of the .bootloader say ?
Mr Hofs said:
Never ever seen that version number !!! It should start with 1.29 or 2.17
Are you sure you have the international HTC one x ??? What does the top of the .bootloader say ?
Click to expand...
Click to collapse
i've tried
RUU_ENDEAVOR_U_ICS_40_hTC_Asia_TW_1.26.709.3_Radio_1.1204.90.13_release_251853_signed
and
RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_TW_3.14.709.20_Radio_5.1204.162.29_release_292865_signed
top of bootloader? what do u mean? where to check?
If you put the phone in bootloader menu .... Hold power button and volume down button together until it restarts to the bootloader
Check the top 3 lines of text
Does it say ENDEAVORU some where there...
Btw you don't know what the bootloader is ?
Mr Hofs said:
If you put the phone in bootloader menu .... Hold power button and volume down button together until it restarts to the bootloader
Check the top 3 lines of text
Does it say ENDEAVORU some where there...
Btw you don't know what the bootloader is ?
Click to expand...
Click to collapse
ah i see.
it says
ENDEAVORU PVT SHIP S-ON RL
don't know what bootloader is
shoo said:
ah i see.
it says
ENDEAVORU PVT SHIP S-ON RL
don't know what bootloader is
Click to expand...
Click to collapse
Well that's your bootloader !
But a strange main version .... really I've never seen it !!
Does your phone run at the moment, you could try cidgetter from the playstore
Mr Hofs said:
Well that's your bootloader !
But a strange main version .... really I've never seen it !!
Does your phone run at the moment, you could try cidgetter from the playstore
Click to expand...
Click to collapse
hehe i mean i don't know what version of bootloader
cidgetter
on top red words [CID is: ]: [VODAP102]
but
ro.carrier HTC-Asia-SEA-WWE
ro.cid HTC__044
now on to red [CID is: ]: [HTC_044]
shoo said:
hehe i mean i don't know what version of bootloader
cidgetter
on top red words [CID is: ]: [VODAP102]
but
ro.carrier HTC-Asia-SEA-WWE
ro.cid HTC__044
now on to red [CID is: ]: [HTC_044]
Click to expand...
Click to collapse
Well i don't know it now,.you could try a Asia wwe 1.29 ruu ... I have to search more but I'm off to family now for Christmas day. Be back tonight !
Mr Hofs said:
Well i don't know it now,.you could try a Asia wwe 1.29 ruu ... I have to search more but I'm off to family now for Christmas day. Be back tonight !
Click to expand...
Click to collapse
i will try RUU_ENDEAVOR_U_ICS_40_hTC_Asia_TW_1.29.709.7_Radio_1.1204.104.14_release_259284_signed
shoo said:
i will try RUU_ENDEAVOR_U_ICS_40_hTC_Asia_TW_1.29.709.7_Radio_1.1204.104.14_release_259284_signed
Click to expand...
Click to collapse
no luck =(
shoo said:
no luck =(
Click to expand...
Click to collapse
I think you are stuck with a custom rom for a while ! Haven't seen you ruu nor a nandroid backup ! Sorry dude, i can't seem to help you with the knowledge that i have !!
If I really really want to do a super duper factory reset. What should I do? I'm on ARHD 18.2 and hboot 1.39. 3.14.401.31 5.1204.162.29
Back to basic as far as i can...
I have issues with my wifi, I have to restart the wifi after awhile. My screen behave strange and in non responsive from time to time. The battery drains in like 8 hours, earlier it was ok for like 36 hours, that was i think when I used hboot 1.31. All this errors appeared when I went for hboot 1.39 I think.
I understand that downgrading hboot is not possible. But everything else?!?
Thanks for assisting.
Run a RUU for a super duper factory reset ruu.androidfiles.org
I guess you need to do the fastboot command
Fastboot getvar version-main
I think that the main version posted by henrik is from the custom rom that is based on 3.14.401.....
RUU failed.
Shoud I do anything pre RUU?
Fastboot something? Relock?
Yes the bootloader needs to be relocked. And you have to run the ruu with administrator rights. And keep the phone in the bootloader/fastboot usb mode
Are you sure you got the right ruu. Did you do
Fastboot getvar version-main
And did it came up with the same number you posted in the first post ?
Mr Hofs said:
Yes the bootloader needs to be relocked. And you have to run the ruu with administrator rights. And keep the phone in the bootloader/fastboot usb mode
Are you sure you got the right ruu. Did you do
Fastboot getvar version-main
And did it came up with the same number you posted in the first post ?
Click to expand...
Click to collapse
Yes same number.
When i lock it it will only boot to bootloader. To run RUU I need to get in to the phone.
Should I do anyting else in fastboot?
Regards
/Henrik
You can run the ruu in fastboot mode too.
Yeah like i said in my previous post
Thanks allot, now i'm back to scratch. The issues with the touchpanel is still there, the top part is not consistent sometime it works and sometime it doesn't. We will see if the batterylife is better.
Thanks again.
/Henrik
No problem mate, i hope it Works out fine for you in the end :thumbup:
CASE CLOSED !
Hi guys.Im new to HTC one X.I just bought an HTC one X from e-bay and it came pre rooted thought the phone looks brandnew.I tried to insert a sim and my phone keeps on showing an error saying process.com.android.phone is stopped and it does not show any signal bars.After several reboots sometimes signal bars do appear sometimes.But i am unable to make or recieve calls as my phone app keeps on force closing. My phone has stock ICS.
So if i flash a stock RUU will the problem be solved or is there anything that i can do to make my phone work?thank you.
I would recommend flashing a stock RUU.
You would need to check your CID and whether your bootloader is locked or unlocked. To do this, you can hold power+volume up down buttons to reboot phone to bootloader and see the first line.
The RUU you flash must match your CID.
Recommended for you:
RUUs: http://forum.xda-developers.com/wiki/HTC_One_X#Total_recovery_-_flashing_a_RUU_to_completely_restore_your_phone
About CID and other info: http://forum.xda-developers.com/showthread.php?t=2031359
Power button + volume down button (not up)
And post the outcome of this fastboot command
Fastboot getvar version-main
Tony Tan said:
I would recommend flashing a stock RUU.
You would need to check your CID and whether your bootloader is locked or unlocked. To do this, you can hold power+volume up down buttons to reboot phone to bootloader and see the first line.
The RUU you flash must match your CID.
Recommended for you:
RUUs: http://forum.xda-developers.com/wiki/HTC_One_X#Total_recovery_-_flashing_a_RUU_to_completely_restore_your_phone
About CID and other info: http://forum.xda-developers.com/showthread.php?t=2031359
Click to expand...
Click to collapse
Thanks for the help(i hit the thanks button too
one more question.Mine has got super CID.
So what RUU should i flash?
You mean Super CID 11111111?
Did you check with:
fastboot getvar cid
fastboot oem readcid
If my understanding is correct, you should be able to flash any RUU with any CID in that case.
Just make sure the RUU you are flashing is for your device model (HTC One X Endeavor, not HTC One XL or anything else)
I have never owned a supercid device though, so you might want to confirm with someone else.
For RUU downloads:
http://forum.xda-developers.com/showthread.php?t=2094113
http://forum.xda-developers.com/showthread.php?t=2189048
Credits to Mr Hofs for helping me find the links.
nuwanmw1988 said:
Thanks for the help(i hit the thanks button too
one more question.Mine has got super CID.
So what RUU should i flash?
Click to expand...
Click to collapse
Tony Tan said:
You mean Super CID 111111111?
Did you check with:
fastboot getvar cid
fastboot oem readcid
If my understanding is correct, you should be able to flash any RUU with any CID in that case.
Just make sure the RUU you are flashing is for your device model (HTC One X Endeavor, not HTC One XL or anything else)
I have never owned a supercid device though, so you might want to confirm with someone else.
For RUU downloads:
http://forum.xda-developers.com/showthread.php?t=2094113
http://forum.xda-developers.com/showthread.php?t=2189048
Credits to Mr Hofs for helping me find the links.
Click to expand...
Click to collapse
yup..its 11111111
Then you can flash any ruu basically !
Thanx guys..my phone is back to life now.
Sent from my HTC One X using xda premium
Hi. I wanted to go back to stock. So according to some link I referred to:
I typed in cmd
fastboot getvar version-main to know my version. It showed 1.29.401.11
My hboot is 1.39.
I downloaded the RUU: ruu_endeavor_u_jb_45_s_htc_europe_3.14.401.27_radio_5.1204.162.29_release_298897_signed
However, when I ran the RUU, it says the update could not be done "Error: 155"
I don't know what went wrong. Urgent help needed guys. My phone is still stuck on the black screen with htc logo in the middle. And if I run out of battery, it's going to be a big problem.
Please check this fastboot command:
fastboot getvar cid
And let me know what you will get back.
Issue Resolved
Hello all,
The issue has been resolved now. I was trying to run the 3.14.401.27 RUU, but it wasn't working. When I ran the 3.14.401.31 RUU, it worked.
It was pointed out to me by Mr. Hofs that the .27 RUU is for 1.36 HBOOT and the .31 RUU is for 1.39 HBOOT.
Thank you so much, Mr. Hofs, for pointing this out to me.:good: