Hey Everyone,
My LCD screen seems to not be displaying colors as well as it should, almost as if it isn't displaying all the colors that it is in fact capable of...
I had some prior problems with my phone, including a non-functional power button, a digitizer with some unresponsive blind spots along the left and right side of the screen, and a very faint/low volume through the in-call speaker.
I had been planning to go inside my phone using the teardown/repair guide, and actually ended up stripping my phone down to the LCD panel.
The good news is I have fixed all the problems that I had set out to fix while doing the teardown.
HOWEVER, my screen is now a weird teal/blue color. For example, when I equip the standard HTC skin (the one with the nice colorful bubble background) Instead of the notification bar/button being a solid steel gray, they seem to have striping pattern with some dull colors of gray but with this teal coloration.
I was wondering if it is more likely something to do with the pcb/lcd getting slightly damaged when I did the teardown, or is it possible it is something to do with a setting on my phone? (the boot screen did load up once, when I was doing the teardown and checking if my phone still worked, I chose reboot as the option)
HELP!
Well more then likely it is the conectors I've seen it to many times when people dicide to take apart phones id say take it all apart and make sure your cabbles are plugged in nice and and firm report back and tell me. Also make sure you havnt nicked anythng on the pcb boards (traces or anything) no nicked cords ect
Sent from my HTC Vision using XDA App
Same thing happening with mine, it's a week old and I've never taken it apart.
Only thing i can think of that happened that makes sense is a damaged pcb flex cable, thats it.but the weird thing is i fixed everything else. Its annoying cause videos look wack and taking photos is also messed. Ill probably go back into my phone and see what i can do, ive opened it like 8 times so wont be too hard.
)
Sent from my HTC Vision using XDA App
me too
Just wonderening if anyone found a solution to this problem as I am experiencing the same thing. I have never taken my phone apart. I have my own post called display color problems. Please help! This is absolutely obnoxious!
I sent mine back to Bell for repair. Took 2 weeks, don't know what they did but it works great now.
Was that an expensive repair? Wish I knew what the problem was so I could try to fix it myself.
Sent from my HTC Vision using XDA App
bglidd414 said:
Was that an expensive repair? Wish I knew what the problem was so I could try to fix it myself.
Click to expand...
Click to collapse
Actually it was covered under warranty so cost me nothing.
Well thanks anyway.
Sent from my HTC Vision using XDA App
Is your phone not under warranty? If it's because you rooted it, you can relock the phone with gfree and restore the BellMobility RUU...
Yeah I guess I could but I really can't go two weeks with no phone. That's the main problem.
Sent from my HTC Vision using XDA App
Figured I'd give this thread a bump. Really just hoping that someone out there has some experience with this problem. I've searched the net high and low to no avail. I don't want to waste money on unnecessary parts if I just need one. Presently, I plan on replacing my LCD. If anyone has any other suggestions, I'd love to hear them...
Sent from my HTC Vision using XDA App
This happened to me before i first opened up my phone. I wouldn't replace the LCD because i cracked mine, and had to replace it and it still does it. Just try and get a replacement phone from your carrier or the store from which you bought it while they fix it. Easiest option.
Many One X owners, including me, has be having from display/screen issues that are quite annoying. And apparently, none has a definite answer as to what the main cause is. hTC has exchanged all those faulty devices, claiming it's a "hardware" issue...while in fact, it's their stupid back covers...i'll explain as we speak.
First, to know what screen/display problem i'm talking about, please refer to this Video.
Few days ago, i got my hands on a "Dead" One X...but i just refused that fact...because it just works! but no screen....screen is always blank....can touch it, go to dealer and make a phone call even. Sometimes the screen turned, sometimes, and it was like in the video, exactly like it.....so what's the problem?!
yesterday, i'll be honest, i got mad at this phone and held it with a tight grip...my finger happened to press just above something...and the screen turned on! worked great in fact! i was astonished! it just worked....but, oops, i turned off screen, then when wanting to turn it back on...blank...
I kept pushing on the back casing of the phone, trying to find the same place that made the screen turn back on...and viola, same place pressed on, screen back on.
Wanna know what's causing all of this?
Here you go:
Click me!
And those connectors Should be in good contact with this on the back cover
Click me too!
But you know, hTC ****ed this one up, just like it does on most devices with connectors on the back cover...*sigh*...like the sensation for example...
So what to do now?
i tried a bunch of things, and almost broke those connectors with a stupid thick aluminum foil on top of them...
also i tried bending them up, but that doesn't help either, as when the cover pushes them down, their shape will change and well...didn't work.
i also tried putting aluminum foil on the metal connectors on the actual cover...didn't help as well!
it seems only pushing on it from outside does the trick!!
i also tried pushing on the connectors together while the back casing is off, didn't work...as it seems there must be a triple connection...board, connectors, and cover...
I think the only solution would be with a new back casing? but...if hTC f****d it up with this one, wouldn't all back casing suck too?? or is this a manufacturing problem that the connectors are just short and won't connect well?!
here are pictures of how the phone turned on magically after pressing over that connector, and another of how the screen gets messed up when the, well, there's not a good connection...Thank you hTC!
Sample 1 Sample 2
Tomorrow i will buy a new back casing and report if that helped me or not.
I only came to this because i have no warranty...if you have warranty, please consider an exchange!
Oh, and finally, i was able to get into bootloader, first time i saw that screen! always has been blank!...pushing on the connector also did the trick.
Finally!
Soooo...comments?
If anyone has an idea on how to make the back casing come in better contact with those connectors, please let me know.
UPDATE
Hmm, why did you put this into Q&A?
what? in a bad mood and wanna bash me?
where should i put it then? as people with such problem would come ask here, am i right?
EDIT: lol, it's all good now ^^
arabology said:
what? in a bad mood and wanna bash me?
where should i put it then? as people with such problem would come ask here, am i right?
Click to expand...
Click to collapse
Well nah, would post it into General , as this was more like a guide. I wasn't bashing.. and not in a bad mood... If anything I bumped your thread up...
Also wanted to say that those contacts and that case seems to be f..cked up in general. As next to those you have the WIFI ones which in another thread, thats in General is shown how to fix...
My first comment was a compliment and you could clearly see I was smiling as I am on my avatar smiling. No reason to get defensive...
PAGOT said:
Well nah, would post it into General , as this was more like a guide. I wasn't bashing.. and not in a bad mood... If anything I bumped your thread up...
Also wanted to say that those contacts and that case seems to be f..cked up in general. As next to those you have the WIFI ones which in another thread, thats in General is shown how to fix...
My first comment was a compliment and you could clearly see I was smiling as I am on my avatar smiling. No reason to get defensive...
Click to expand...
Click to collapse
oh well...also WIFI connectors are bad?...no wonder SIII is flying and hTC is dying...
anyway, maybe a moderator can take this thread to the general forum, thanks for pointing those things out!
and sorry i seemed mean, but many, really, many users have nothing better to do but nag...trolls
thanks ^^
Soldering would fix this!
putting two round solders on the gold plates of the back cover. i will try that tomorrow. but i fear they would squash the connectors on the board? as that's what happened when i used two tiny balls of aluminum foil....one connector got squashed by it and i had to push it back up and play with it to make it look normal again.....hmmmm
arabology said:
Soldering would fix this!
putting two round solders on the gold plates of the back cover. i will try that tomorrow. but i fear they would squash the connectors on the board? as that's what happened when i used two tiny balls of aluminum foil....one connector got squashed by it and i had to push it back up and play with it to make it look notmal again.....hhhhh
Click to expand...
Click to collapse
Moved to general forum hope youll fix it bro...
So it is a hardware fault,would never guess that...in the general forum you have a topic with the name "wifi fault" give a look on that
Sent from my HTC One X using XDA
muamers said:
Moved to general forum hope youll fix it bro...
So it is a hardware fault,would never guess that...in the general forum you have a topic with the name "wifi fault" give a look on that
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
*nods* already took a look at that
will try the soldering...or connecting a wire between both connectors...one of those should work
arabology said:
*nods* already took a look at that
will try the soldering...or connecting a wire between both connectors...one of those should work
Click to expand...
Click to collapse
Like you guys would say: "inshallah" :d
Just dont rush with the opening and be carefull
Sent from my HTC One X using XDA
waw another fellow citizen
so before we go ahead and go
doooom gloooom htcccc suxxxxxxx
lets first affirm tons of people have no problems with their wifi and their screens
so yes those connectors issues whether screen or wifi are another forum of a manufacturing defect, things might not be perfectly aligned and hence the issue
the flickering issue your thread title suggests finding the source of, isnt related to this, 90% of the corruption we saw out of box on the HOX turned out to be software including the back-light flicker which HTC fixed by readjusting the LCD voltage
moving on to your question a new back cover might very well fix it unless the misalignment is on the board
but im wondering why is this pin related to the screen to begin with? the Sensation didn't have such a pin you could remove the back cover and the screen kept operating, also the disassemble photos that were posted for the HOX showed the board and screen running perfectly without the back cover
as for the stupid copper foil, make sure you don't loose it unless you are planning to make a bomb its added to distribute Tegra3 heat
arabology said:
*nods* already took a look at that
will try the soldering...or connecting a wire between both connectors...one of those should work
Click to expand...
Click to collapse
Before you do that, please check the WIFI thread. There was already one member that described that soldering or adding a wire might be possibly harmful in the long run.
Changing the electricity stuff, how its called, the resistance or something (for the antenna though)
I'm having the same damn issue (check the picture) and thanks to Arabology for the well explanation on the problem. what I did was to send my phone to the service center and they told me it will take 3 working days (today was just the 1st day) for the technician to diagnose the fault and decide whether to replace the device or to repair it.
given that its a well known defect - should I just demand an exchange for a new device just incase if they revert that they repaired my phone? because I am sure the chances for the problem to reoccur is high.
Also just so you know I purchased this phone only about 3 months ago in HTC roadshow launch of OneX in Malaysia. HTC needs to come out with really quality products otherwise they will loose all their customers to samsung & apple (I believe they already lost major % of their loyal customers to their rivals)
oh well hope to get a good news soon. will keep u guys posted.
Update:
well, My One X is just cursed, few days ago it feel off my hand and the screen got cracked. now i'm waiting for my local repair station to get hold of a One X digitizer.
ALSO, HUGE NEWS, seems i was wrong. it's not the connectors. it's the whole part where there is a copper kinda sheath over it...i guess that's where are the cores are plus the Nvidia Tegra chip??! turned out, when i push there, that the screen lights up. at first i thought it's the connector, coz that's the most reasonable right?
what could be wrong under that? well, that place can be taken off, there's a metal housing that can be lifted off....idk, nothing seems wrong there...but seriously, just a slight push lights up the screen! so now i'm using the oldest trick in the book, i put a wrapped paper at the back of the casing, just where it will push over the place i talked about, and now screen is always on....just this small push does the job!! no more flickering!
i repeat, it's not the connector nor the back casing.......only God and hTC knows what's going on...
i did further investigations and tried to relate the "push" to any connections that could be on the board from the other side, but after disassembling the phone, there does't seem to be anything on the other side of the board that needs that certain force to help the screen to light up....idk, this just boggles the mind.
...anyone has any clue?!?
BTW, phone is working great even with the cracked screen, playing Dark Meadow just fine
walker07 said:
I'm having the same damn issue (check the picture) and thanks to Arabology for the well explanation on the problem. what I did was to send my phone to the service center and they told me it will take 3 working days (today was just the 1st day) for the technician to diagnose the fault and decide whether to replace the device or to repair it.
given that its a well known defect - should I just demand an exchange for a new device just incase if they revert that they repaired my phone? because I am sure the chances for the problem to reoccur is high.
Also just so you know I purchased this phone only about 3 months ago in HTC roadshow launch of OneX in Malaysia. HTC needs to come out with really quality products otherwise they will loose all their customers to samsung & apple (I believe they already lost major % of their loyal customers to their rivals)
oh well hope to get a good news soon. will keep u guys posted.
Click to expand...
Click to collapse
i say you should demand an exchange. hopefully the device they'll give will be of a different tier of products that doesn't have that silly, unknown problem.
also, i'm pretty well sure that they won't repair your device. as i read many users regarding this issue, all of them got an exchange......seems pretty messed up. and i doubt my paper trick will hold long before this issue comes back
PAGOT said:
Before you do that, please check the WIFI thread. There was already one member that described that soldering or adding a wire might be possibly harmful in the long run.
Changing the electricity stuff, how its called, the resistance or something (for the antenna though)
Click to expand...
Click to collapse
now that i have a paper inside my back casing, i can see that my WIFI connection is not at it's best, because of the extra space it took. so i'll most probably solder all the connectors
arabology said:
Update:
what could be wrong under that? well, that place can be taken off, there's a metal housing that can be lifted off....idk, nothing seems wrong there...but seriously, just a slight push lights up the screen! so now i'm using the oldest trick in the book, i put a wrapped paper at the back of the casing, just where it will push over the place i talked about, and now screen is always on....just this small push does the job!! no more flickering!
i repeat, it's not the connector nor the back casing.......only God and hTC knows what's going on...
i did further investigations and tried to relate the "push" to any connections that could be on the board from the other side, but after disassembling the phone, there does't seem to be anything on the other side of the board that needs that certain force to help the screen to light up....idk, this just boggles the mind.
...anyone has any clue?!?
BTW, phone is working great even with the cracked screen, playing Dark Meadow just fine
Click to expand...
Click to collapse
there was some guy, who posted a youtube video of when he pushed a certain area of his screen (the front part), it would switch off!
It only did it when pushed in that area, it was literally like a second power button.
Sorry I don't know exactly what it was, just the fact that somebody else had a similar problem!
HTC repaired my phone as the screen was faulty, it had a yellow tint, when i sent it for repair it did have screen flickering, ever since its come back, with a new screen, i rooted it and also put in the NEW ARHD rom, 2.05.2 base or something, it has stopped flickering :fingers-crossed:
walker07 said:
I'm having the same damn issue (check the picture) and thanks to Arabology for the well explanation on the problem. what I did was to send my phone to the service center and they told me it will take 3 working days (today was just the 1st day) for the technician to diagnose the fault and decide whether to replace the device or to repair it.
given that its a well known defect - should I just demand an exchange for a new device just incase if they revert that they repaired my phone? because I am sure the chances for the problem to reoccur is high.
Also just so you know I purchased this phone only about 3 months ago in HTC roadshow launch of OneX in Malaysia. HTC needs to come out with really quality products otherwise they will loose all their customers to samsung & apple (I believe they already lost major % of their loyal customers to their rivals)
oh well hope to get a good news soon. will keep u guys posted.
Click to expand...
Click to collapse
Finally found someone with the exact same problem. I haven't been able to use my hox properly for weeks. Think I need to be sending back to HTC
Sent from my X10i using XDA
Finally I've got my OneX replaced with a new unit.:laugh: Hoping this will not have any sort of hardware faulty anymore.
interestingly. while waiting for my turn in the service center, I was just talking to a guy sitting and waiting beside me who came to report a problem with his OneX
and apparently its his 4th time visit to the service center. And all his previous 3 visits ended up with his OneX getting replaced each time....and each time with a different hardware issue (screen flickering / dead pixels / color faulty). Oh man....I thought the OneX was the best quality product from HTC.
and now I'm having a slight regret that I shud have just waited for another 2 more months and bought the SIII instead. God knows what other problems my OneX is going to come up with.
Hi
arabology said:
Update:
well, My One X is just cursed, few days ago it feel off my hand and the screen got cracked. now i'm waiting for my local repair station to get hold of a One X digitizer.
ALSO, HUGE NEWS, seems i was wrong. it's not the connectors. it's the whole part where there is a copper kinda sheath over it...i guess that's where are the cores are plus the Nvidia Tegra chip??! turned out, when i push there, that the screen lights up. at first i thought it's the connector, coz that's the most reasonable right?
what could be wrong under that? well, that place can be taken off, there's a metal housing that can be lifted off....idk, nothing seems wrong there...but seriously, just a slight push lights up the screen! so now i'm using the oldest trick in the book, i put a wrapped paper at the back of the casing, just where it will push over the place i talked about, and now screen is always on....just this small push does the job!! no more flickering!
i repeat, it's not the connector nor the back casing.......only God and hTC knows what's going on...
i did further investigations and tried to relate the "push" to any connections that could be on the board from the other side, but after disassembling the phone, there does't seem to be anything on the other side of the board that needs that certain force to help the screen to light up....idk, this just boggles the mind.
...anyone has any clue?!?
BTW, phone is working great even with the cracked screen, playing Dark Meadow just fine
Click to expand...
Click to collapse
Probably what's referred to as a dry joint or some other connection not connecting very well, not uncommon in electronics.
You need to get it repaired or replaced, simple as that. If it is a dry joint under one of the chips that use a ball grid array of solder points, you will never be able to sort that out yourself and it would be scrapped more than likely rather than a repair attempted for such a fault. To repair, it would need to go into a special over to heat it enough to melt the solder under the chip. Exerting pressure will just eventually make things worse as you can end up fracturing more of the soldered connections as there is little give to resist flexing.
Regards
Phil
I have searched the entire forum for the similar problem i am facing but couldn't find any and had to write to you in private.
I have bought my device 3-4 months ago from Bangladesh and cant claim any warranty or replacement. My device screen is flickering more often day by day at the bottom right corner. Its like a screen shot of the top or any other portion of the tab that is flickering at the bottom right corner. I tried the brightness issue, didn't work. Then I factory reset my device thought might be a bug but still no luck. Now i am worried whether this is a hardware problem or not. But i never dropped the device. So shouldn't be one.
I recorded the problem with my mobile to be more precise. Video attached herewith in zip file.
I would be really grateful if anyone can help me out with a solution.
Thanks.
Mosharraf29 said:
I have searched the entire forum for the similar problem i am facing but couldn't find any and had to write to you in private.
I have bought my device 3-4 months ago from Bangladesh and cant claim any warranty or replacement. My device screen is flickering more often day by day at the bottom right corner. Its like a screen shot of the top or any other portion of the tab that is flickering at the bottom right corner. I tried the brightness issue, didn't work. Then I factory reset my device thought might be a bug but still no luck. Now i am worried whether this is a hardware problem or not. But i never dropped the device. So shouldn't be one.
I recorded the problem with my mobile to be more precise. Video attached herewith in zip file.
I would be really grateful if anyone can help me out with a solution.
Thanks.
Click to expand...
Click to collapse
It seems like your CPU/GPU is burning out... I had the same problem when over clocking my old Galaxy Ace..
The problem may not be the same, but its all I can think of.
EDIT: it could possibly be because the ribbon cable that connects the Screen to the MoBo is loose?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Abel669 said:
It seems like your CPU/GPU is burning out... I had the same problem when over clocking my old Galaxy Ace..
The problem may not be the same, but its all I can think of.
EDIT: it could possibly be because the ribbon cable that connects the Screen to the MoBo is loose?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ribbon cable...i thought of that too...hope that is the prob..it shouldn't be a great problem then. What if CPU/GPU is burning out...what will be the solution then? Thanks for your reply though.:good:
Mosharraf29 said:
Ribbon cable...i thought of that too...hope that is the prob..it shouldn't be a great problem then. What if CPU/GPU is burning out...what will be the solution then? Thanks for your reply though.:good:
Click to expand...
Click to collapse
If the ribbon cable is loose, power off you device and pull the back cover off and have a look.
If the CPU/GPU is burning out, the only thing I would suggest would be a moderate under clock of both units and pray that your device will last, alternatively, throw your device at a wall to preemptively break it before they do die and your device becomes a really crappy decorative ornament.
Seeing as you cannot get a replacement, your only option is to try and keep it from happening by any means.. It is only a matter of time.
OR,
I'm wrong.
Abel669 said:
If the ribbon cable is loose, power off you device and pull the back cover off and have a look.
If the CPU/GPU is burning out, the only thing I would suggest would be a moderate under clock of both units and pray that your device will last, alternatively, throw your device at a wall to preemptively break it before they do die and your device becomes a really crappy decorative ornament.
Seeing as you cannot get a replacement, your only option is to try and keep it from happening by any means.. It is only a matter of time.
OR,
I'm wrong.
Click to expand...
Click to collapse
Last night i showed my device to a professional and as this device is not much available in Bangladesh, they are not expert enough. Though he suspected it might be the cable issue but he cant be sure. He might get it right if he gets another same device to test. So m left with very few options :crying:. I got to wait for the parts to be available or i got to contact the Asus product importers but fingers crossed. Disappointing...its just a couple of months and lot of money for me.
Anyway...thanks for all the help and support. Appreciate it.
Mosharraf29 said:
Last night i showed my device to a professional and as this device is not much available in Bangladesh, they are not expert enough. Though he suspected it might be the cable issue but he cant be sure. He might get it right if he gets another same device to test. So m left with very few options :crying:. I got to wait for the parts to be available or i got to contact the Asus product importers but fingers crossed. Disappointing...its just a couple of months and lot of money for me.
Anyway...thanks for all the help and support. Appreciate it.
Click to expand...
Click to collapse
am experiencing the same issue, plz notify me if any updates, thx
I face the same issue on my nexus 7(2013). Is there any solution to this?
Sent from my Xperia Sola using Tapatalk
I have this issue as well. Got a 16GB 2013 model free that had a shattered digitizer. Replaced the screen and for about 24 hours it seemed fine (only a little use). As I began to check it out and use it I started getting this odd flicking glitch on the bottom right of the screen, right edge to about 3/4 or 4/5 to the left. over time the amount of time the glitching occurs has gotten longer, and after re-seating all of the cables (they're in good and straight) it's pretty much constant now.
same here. i haven't even overclocked my tablet i might have to open my device up some time...
I fell in the water with my phone. Salt water at that. Once I came to, my phone had a blinking light coming from the camera flash. I took battery out and let dry. Today I got up, took phone completely apart, cleaned with contact cleaner. Was ALOT of salt inside the phone. Anyways I got it cleaned up as best I could, pretty clean. Let dry again for a few hours.
Its back together now, turns on. Screen goes all crazy, pink and fuzzy. Pulsing blue led on front for about 10 seconds. Then nothing. Tried USB to PC nothing.
I found these phone don't come fully apart. I can take out main board, camera and a few plastic parts. But that's it. Lots of phone to take apart but no guides past this point and all the teardowns bring me to the same point.
Any ideas? Maybe bath the screen and what left for electrical components in alcohol?
Thanks
Sent from my Nexus 7 using XDA Premium HD app
Can a mod move this to galaxy s3 i747 section? My bad
Sent from my Nexus 7 using XDA Premium HD app
Sea water messes up components, think you should consider a new phone
Yea bro I'm gunna say that trying to fix it is more money and effort then just buying a new one
I already bought a new phone. Got another i747m. $400 didn't wanna mess with used phones again, last 3 used phones all ended up having an issue one way or another. Save a few bucks gain a few headaches.
Thanks for confirming what I thought though.
I am going to investigate fixing the phone. Still.
I got it to boot more now, pulsing boot led, vol buttons make a sound when I press them. I used my multimeter to test most of the connections. Everything I could check is fine. I think there is more salt behind the screen and behind the 2 small PCB chips that I couldn't get off. Going to try excessive force this time. Nothing to loose.
Is it safe to use the battery still? Its not swollen or nothing. Or should I not bother being as the water mark on the battery is pink?
Sent from my Nexus 7 using XDA Premium HD app
ronedogg said:
I already bought a new phone. Got another i747m. $400 didn't wanna mess with used phones again, last 3 used phones all ended up having an issue one way or another. Save a few bucks gain a few headaches.
Thanks for confirming what I thought though.
I am going to investigate fixing the phone. Still.
I got it to boot more now, pulsing boot led, vol buttons make a sound when I press them. I used my multimeter to test most of the connections. Everything I could check is fine. I think there is more salt behind the screen and behind the 2 small PCB chips that I couldn't get off. Going to try excessive force this time. Nothing to loose.
Is it safe to use the battery still? Its not swollen or nothing. Or should I not bother being as the water mark on the battery is pink?
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
The battery *should* be fine for a while. I've used a water damaged one for the longest time but it did spend a couple days in a bag of rice.