Related
Droids don't belong in the sink.
Good news, it's ALMOST working. It stayed on, and actually Skype stayed on broadcasting its drop. I panicked, pulled it out, tried to turn it off, pulled battery. Ended up it bootloop.
Flashed a series of images most of the days and finally this process seemed to get me the closest.
1. Flash CWM to boot.
2. Reboot in unlocked fastboot
3. Flash Google stock images
It ACTUALLY booted. I had WiFi, cellular connection and a touch screen.
The touch screen became sluggish, stopped working, my phone restarted itself.
Back to boot loop. Tells me all the hardware is working, just intermittently.
Don't know what else to do.
I'm confused. Is this a story about your phone surviving "water?" Or are you simply looking for help on what to do because your phone is boot looping?
If it's help then it was probably a bad idea to turn the phone back on. Best thing to do is put it in a bag of rice and leave it there for a couple of days for everything to dry. I'm not sure what there is to do now because you already turned it back on and it could of caused permanent damage to your phone. You can put it in a bag of rice and see what happens anyway. You might get lucky.
When you drop any gadget in water, best thing to do is immediately remove the battery and leave it in a bowl of rice for a day or two.
Sent from my Galaxy Nexus using XDA App
emuneee said:
When you drop any gadget in water, best thing to do is immediately remove the battery and leave it in a bowl of rice for a day or two.
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
Yup. Absolute worst thing you can do is put the battery back in and turn it on.
Sent from my Galaxy Nexus using XDA App
all i know is i'll be damned if i ever decide to do a water(or liquid of any kind) test on this phone or any other phone for that matter. phyiscal abuse is a different story....
from my experience, a phone can really take a beating, but when it comes to liquids.. game over!
I should know better. I just wish the person I was Skyping with recorded the demise of my Droid
Just dry it out for a few days, or longer as others have mentioned above, i had a magic that was fully soaked that would boot fine after a few hours of drying but it took almost a week before the touch screen was working stably, i gave it to a friend as i had already replaced it and it went on to be used daily for another couple of years.
I saw somewhere that you can dunk it in rubbing alcohol to displace the water before you put it in rice.
Buff McBigstuff said:
I saw somewhere that you can dunk it in rubbing alcohol to displace the water before you put it in rice.
Click to expand...
Click to collapse
I wouldn't recommend that. I'd recommend opening up the case since warranty shot anyways and pat dry as much as possible, then stick in rice.
My grandma beat me down and took my nexus. Sent from a jitterbug with beats by dre.
Okay, so I dropped my phone in a puddle. Did the whole rice thing and whatnot to no avail. The phone isn't COMPLETELY fried, but unusable. It turns on, but only for about 60 seconds at a time before it reboots. The power button is spazzing out and constantly presses so the screen goes off and on. I can use the phone for a minute if i hold the power button and then press the back button when the long press menu comes up.
Enough of that, time for solutions.
I'm not eligible for an upgrade until August in which I was hoping for the GS3 to be released on Sprint by then. I was hoping to maybe buy a bad ESN Galaxy Nexus or even just another Epic off EBay/Craigslist. Would I be able to use my Epic's clean ESN for the Nexus? I'm on a really tight budget so full price is completely out of the question. Any and all help is greatly appreciated guys!
Is it rooted? Better odin back to fc09 if it is and bring it to sprint to see if they'll replace it. I had the same issue with the buttons going crazy and not working and they gave me a new one.
Sent from my SPH-D700 using XDA App
ESNs are tied to each phone, and cannot legally be swapped AFAIK
Could try taking apart and seeing if a cleaning will help, if you are going to write the phone off anyways.
Do you have TEP? Can try to ODIN the latest OTA, and if it fails see if a shop will replace it, but they may find a water detector tripped
IMO, best best is an Epic off Ebay or Craig's list with a clean ESN
Alcohol!!!!! Watch the vid, it'll help out.
http://www.youtube.com/watch?v=gtyZhwvhqiQ&feature=youtube_gdata_player
Sent from my GT-I9001 using Tapatalk 2
elite developer adam (sorry forgot the last name or so), talks about how alcohol will absorb the moistur or water rather quickly, but if the board got wet, you have a max of 15 seconds before the board becomes warped. meaning, the phone will be totally non-functional. as far as the esn is concerned, sorry, thats a no go.
http://forum.xda-developers.com/showthread.php?t=1569701
this thread might help with taken it apart to clean out
LORDFIRE00 said:
but if the board got wet, you have a max of 15 seconds before the board becomes warped. meaning, the phone will be totally non-functional
Click to expand...
Click to collapse
If this was true, then the rice fix would never work, would it?
I have seen several people say they got their phone wet, and use the few days in rice trick to get it back, wouldn't that mean the board was wet for longer than 15 seconds?
DCRocks said:
If this was true, then the rice fix would never work, would it?
I have seen several people say they got their phone wet, and use the few days in rice trick to get it back, wouldn't that mean the board was wet for longer than 15 seconds?
Click to expand...
Click to collapse
Really all depends on how long it was in the water and how long it took you to get it into the rice... if you can get it out of the water in 10 secs or less you probably have a little time to get it into the rice... not like the water is just gonna pour in it as soon as it hits the water... if you get it straight out you most likely won't have very much water inside it and be able to still dry it out...
My phone went for a swim with me last summer let it set for about 3 days then turned it on and everything worked just fine so let it set somewhere where its hot so it dries your phone and yeah I was one of those idiots that tried turning my phone on several times during that day I didn't stick in rice or any thing like just let it naturally dry out
Sent from my SPH-D700 using Tapatalk 2
Ok my one and a half year old son got a hold of my Epic Touch and I dont know for how long he had it in the toilet.I knew this day would come but I was hoping for it to be my girlfriend's original Epic,lol.
So I took it apart,dryed it real good with paper towel first,then with air and baked it in oven for a minute or two.
I put it back together and it works!Its amazing because after my son diped it in water it layed wet for about twenty minutes before I found it.
I have one question for those that have more knowledge about Epic's internals:
Everything works except the POWER BUTTON!Yes I can use the power button one time to turn on the phone but after that it doesnt work anymore.
I cant turn off the phone,bring up the shutdown/airplane mode menu or anything else,in order to turn off the phone I need to pull battery.
Yes I took it apart again cleaned everything with rubbin alcohol inside and still same problem,any ideas?
Thanks in advance.
Oh,is there any apps out there that can map power button to search or home buttons?
lviv73 said:
Ok my one and a half year old son got a hold of my Epic Touch and I dont know for how long he had it in the toilet.I knew this day would come but I was hoping for it to be my girlfriend's original Epic,lol.
So I took it apart,dryed it real good with paper towel first,then with air and baked it in oven for a minute or two.
I put it back together and it works!Its amazing because after my son diped it in water it layed wet for about twenty minutes before I found it.
I have one question for those that have more knowledge about Epic's internals:
Everything works except the POWER BUTTON!Yes I can use the power button one time to turn on the phone but after that it doesnt work anymore.
I cant turn off the phone,bring up the shutdown/airplane mode menu or anything else,in order to turn off the phone I need to pull battery.
Yes I took it apart again cleaned everything with rubbin alcohol inside and still same problem,any ideas?
Thanks in advance.
Oh,is there any apps out there that can map power button to search or home buttons?
Click to expand...
Click to collapse
Maybe umm quickboot plus from the market can do it. Only $2
Sent from my SPH-D710 using Tapatalk 2
Do not power it back on.. Put it in a sealed bowl and fill it with rice. Leave it there for at least 24hrs. Even longer if you want the best result. It takes water damage a couple of weeks to really rear its ugly head. Sofar rice seems to be the best bet.
Good luck.. Report back to help out others with this same prob.
Definitely try the rice trick... I would recommend doing that before baking your motherboard in the oven.
The only time I've ever heard of baking any electronic device in the oven is for the Xbox 360...
Sent from my SPH-D710 using xda premium
Indrid Cole said:
Do not power it back on.. Put it in a sealed bowl and fill it with rice. Leave it there for at least 24hrs. Even longer if you want the best result. It takes water damage a couple of weeks to really rear its ugly head. Sofar rice seems to be the best bet.
Good luck.. Report back to help out others with this same prob.
Click to expand...
Click to collapse
I already took it apart and dried it,plus put it in oven.I would say that there is no need for rice now,rice is for those that want to dry inside without talkn the phone apart.Everything works but the power button which is really strange.
Mattix724 said:
Definitely try the rice trick... I would recommend doing that before baking your motherboard in the oven.
The only time I've ever heard of baking any electronic device in the oven is for the Xbox 360...
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I just did that to make sure any remaing moisture was gone.Still no answer why I cant use the power button except to turn on the phone.
Are you on a custom ROM? if so, maybe its the ROM bugging out, not the phone. Just a wild guess.
Do the RICE deal as mentioned above it WORKS on all sorts of electronics!
Chew DZ said:
Are you on a custom ROM? if so, maybe its the ROM bugging out, not the phone. Just a wild guess.
Click to expand...
Click to collapse
Im starting to think that too,im gonna try reflashing and see what happens.Power button does work to turn the phone on but after this it doesn't.
I just don't want to reflash because i been running Blazer 4.0 for 3 months now(the longest i ever went without flashing,lol) and i added all types of custom apk"s to that rom.I would usually extract apk files from this rom and pit them in the new one but i odexed it,so no it looks like im going to have to make a whole new rom and that's a day gone.
He has already gone far and above the rice trick. That would be repetitive and unnecessary.
Also, rubbing alcohol is not a good solution. It leaves a film on the metal that is highly corrosive. You need denatured alcohol.
The power button has a two step contact. That button most likely needs to be replaced. You can order cheap on a wholesale parts website.
Sent from my SPH-D710 using Tapatalk 2
azyouthinkeyeiz said:
He has already gone far and above the rice trick. That would be repetitive and unnecessary.
Also, rubbing alcohol is not a good solution. It leaves a film on the metal that is highly corrosive. You need denatured alcohol.
The power button has a two step contact. That button most likely needs to be replaced. You can order cheap on a wholesale parts website.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Finally someone understands it.I don't think power button needs replacement because i use the power button to turn on the phone,lol.But after that power button doesn't work.The power button only works one time-to turn on the phone but that's it,so its not the button that's defective.Its gotta be software related or one of the chips that controls power button after the phone is on is fried.
I didnt kno the e4gt was out that long lol.. Either way anything could be going on.. It was dropped in water lol
Sent from my SPH-D710 using XDA
Try button remapper to resolve the power button ordeal. I personally would ditch the search button and use that as the new power button.
Sent from my SPH-D710 using xda premium
The likely reason its not functioning after you power on is a short somewhere created by the liquid. When powered off the short is not affecting but once on it disables the button. I dont think you can replace that button unless you've got some decent soldering skills and you cant really be sure that even that would fix it. Liquid is one of those wildcards when it comes to electronics. You dont know if your screwed from jump or if the liquid might rear its ugly head later... too unpredictable.
d12unk13astard said:
Try button remapper to resolve the power button ordeal. I personally would ditch the search button and use that as the new power button.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Just what i was thinking,what is the button remapper app called?
blackhawksnip3r said:
The likely reason its not functioning after you power on is a short somewhere created by the liquid. When powered off the short is not affecting but once on it disables the button. I dont think you can replace that button unless you've got some decent soldering skills and you cant really be sure that even that would fix it. Liquid is one of those wildcards when it comes to electronics. You dont know if your screwed from jump or if the liquid might rear its ugly head later... too unpredictable.
Click to expand...
Click to collapse
I already thought of that,i was thinking if i run the phone for a while and internals get warm that this little drop of water will evaporate(if that's what it is because i heated in in the oven pretty good,i couldn't even touch it),i will have to see after few days of usage.
i thought the one problem... would be it smelled like ****. :good:
lviv73 said:
I already thought of that,i was thinking if i run the phone for a while and internals get warm that this little drop of water will evaporate(if that's what it is because i heated in in the oven pretty good,i couldn't even touch it),i will have to see after few days of usage.
Click to expand...
Click to collapse
Lol the water emits an electrical shock when put in water which can damage any part of the phone.. Heating it up in a microwave is only resoldering the phone.. Wont fix an electrical shock that could have damaged a chip or a hardware button a led etc.. What would happen if you had a pc plugged in and dropped it in water while it was on? Just throw it in the microwave and itd be fine?
Sent from my SPH-D710 using XDA
elliwigy said:
Lol the water emits an electrical shock when put in water which can damage any part of the phone.. Heating it up in a microwave is only resoldering the phone.. Wont fix an electrical shock that could have damaged a chip or a hardware button a led etc.. What would happen if you had a pc plugged in and dropped it in water while it was on? Just throw it in the microwave and itd be fine?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Lol,microwave?Who said anything about microwave?Im talking about regular oven,microwave will fry everything in few seconds.
Damn it,now its serious,phone wont go into Download Mode.When i try to put it in download mode i push "up" key for "Yes" and it flashes for about one second download mode,well not exactly it flashes this:
ODIN MODE(in red letters)
Product Name:SPH-700
Custom Binary Download:NO
Current Binary:Samsung Official
Downloading do not turn off target
It flashes that for about one second then it starts to boot into android.Another thing that i noticed is when i power on the phone i get Samsung Galaxy S2 logo then it disappears then the phone reboots and i get Samsung Galaxy S2 logo second time and then it boots into android.
So it boots after second galaxy s logo.I can still boot into CWM though that's only good thing.
Has anyone encountered similar phenomenon before?
Bottom half of my phone was submerged in a drink of water for about 6 seconds. I instantly opened the back, removed battery, and dried off everything from the outside. I popped the battery back in and turned device on. Menu and back don't work, haven't tried plugging it in via USB or made a phone call. You think once water comes out the menu and back will work?
Sent from my Nexus S 4G using Tapatalk 2
Ascertion said:
Bottom half of my phone was submerged in a drink of water for about 6 seconds. I instantly opened the back, removed battery, and dried off everything from the outside. I popped the battery back in and turned device on. Menu and back don't work, haven't tried plugging it in via USB or made a phone call. You think once water comes out the menu and back will work?
Sent from my Nexus S 4G using Tapatalk 2
Click to expand...
Click to collapse
You did everything right until you put the battery back in. You should have put in in a bag of rice or ran a blow dyer on low heat. But I've seen plenty of phones come back from water damage. Good luck
Ascertion said:
Bottom half of my phone was submerged in a drink of water for about 6 seconds. I instantly opened the back, removed battery, and dried off everything from the outside. I popped the battery back in and turned device on. Menu and back don't work, haven't tried plugging it in via USB or made a phone call. You think once water comes out the menu and back will work?
Sent from my Nexus S 4G using Tapatalk 2
Click to expand...
Click to collapse
It should work and if it doesn't I guess aokp will be your new best friend
Sent from my Samsung Galaxy Emperor using psycommu
I used hair dryer on it for 2 hours and it works flawlessly now.
Hair dryer can spread moisture thru the rest of the device and kill it later. Its really simple and safe just to remove the 5 or 6 screws from the back and take off the black olastic. Hit it again with ur blowdryer just to be safe. U will find there is still quite a bit of moisture under it if you do
Don't use the phone for a day or two and toss it in a container of rice. Put it on top of the fridge for a slight bit of warmth and leave it for a day or two. It will pull all of the remaining moisture out of it.
uh next time you should wait a couple days before attempting to turn it on..
there is always a good chance it will work but chances are something will get fried if you are impatient and try to power it on.. water and electricity aren't a good combo if you haven't already noticed so don't turn it ON. no matter how fast you remove it, water still got inside..
Several years ago I dropped my phone into a bucket of water I was about to mix grout in. I did the same thing you did, and the phone miraculously worked. Over the next week though, individual components malfunctioned one-by-one. I eventually had to buy a new phone. Then 2 years ago I got in a hot tub with my blackberry in my pocket. I didn't realize it until my wife sat next to me and I felt it there. I immediately took the battery out, went inside, took it apart as much as I was able to, placed all 3 major parts in a bucket full of rice, & went tech-free for 48 hours. My abstinence from my phone was somewhat brutal, but it worked flawlessly after that until 7 weeks ago - when I elected to upgrade to Android & bought my SGS3.
I'm not saying you'll have the same experience I did with that 1st phone, but I am saying that time, patience, & rice can work miracles when our expensive high-tech devices meet their ultimate kryptonite. It's like Superman orbiting the sun, good as new!
Sent from my SPH-L710 using xda app-developers app
fishingmedic said:
Don't use the phone for a day or two and toss it in a container of rice. Put it on top of the fridge for a slight bit of warmth and leave it for a day or two. It will pull all of the remaining moisture out of it.
Click to expand...
Click to collapse
I've had two phones get submerged, and I can say, step one is always pull battery. Step two should always be leaving it submerged in rice for a minimum of 24 hours. Mine have always come back from the dead and worked.
My phone is working but battery is lasting 1/3rd of it's original life.
Not sure if the water did something to it?
Ascertion said:
My phone is working but battery is lasting 1/3rd of it's original life.
Not sure if the water did something to it?
Click to expand...
Click to collapse
It could be the a charging problem.
Northerntouch said:
It could be the a charging problem.
Click to expand...
Click to collapse
It's saying battery fully charged though. Idk what the problem is. I'm getting a replacement battery now.
Actually I'm noticing that my weather isn't working like it should. Maybe that's why battery is draining?
My weather widget says N/A.
Ascertion said:
Actually I'm noticing that my weather isn't working like it should. Maybe that's why battery is draining?
My weather widget says N/A.
Click to expand...
Click to collapse
I've had some weird issues like that before. Sometimes, the battery wasn't making a good connection to the phone. Try taking the battery out, using an eraser (on a pencil) and cleaning the contacts on the battery and the phone. Also, I've put a little piece of paper folded up on one side of the battery to force the battery to touch the connectors. I'd get a new battery anyway though, just to be safe. They are cheap.
Ascertion said:
Actually I'm noticing that my weather isn't working like it should. Maybe that's why battery is draining?
My weather widget says N/A.
Click to expand...
Click to collapse
This happened to me after I updated to LG8 and never started working again. I ended up flashing CM10 because it was broken, clock FC'd every time along with other issues. I don't think this is related to your phone taking a bath.
So my kid reached in my pocket and dropped my phone in the toilet. i pulled it out fast, it didn't completely submerge, it's in a bowl of rice atm, how long should I wait to turn it on to see if my $600 just got flushed down the crapper.
To be safe I'd say a day or two. I've never been that patient though. Get some 90% + alcohol dip the phone in it then put it in rice wait a few hours that's always worked for me
Sent from my Galaxy Nexus using xda app-developers app
Last time I revived a fully submerged phone it was like three days. I also did the rice and phone bake in the oven. Wouldn't recommend that unless you figure the phone is toast to start with lol but here it is. Glass bowl, submerge phone in rice, bake on lowest setting of oven taking out often to let cool a little, bake time about an hour. Remove battery, sim, and SD card before baking. When done baking pour everything into zip lock bag for two days. You probably think I'm crazy but this worked on my daughters phone after she dove into a pool with it then tried to turn it on while it was still dripping water. This was on a desire z so not sure how our screen will react to that much heat.
stepheng said:
To be safe I'd say a day or two. I've never been that patient though. Get some 90% + alcohol dip the phone in it then put it in rice wait a few hours that's always worked for me
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I would opt for this method over baking, every oven is different and you run a risk of melting the soldier and causing irreversible damage if it gets too hot. The most important thing about electronic devices getting wet is removing the electrical current ASAP (if possible pull the battery!!!). Other than corrosion, the only problem with water any electronic device has is electrical shorts burning up the circuitry. Once electricity is removed from the equation, alcohol isn't anymore harmful than water, and in fact will evaporate (including the water) much quicker, which in turn reduces the chance of corrosion. That being said, although i am impatient as well i would still give a good day, 24 hours, in a nice rice bath. Just make sure there is no visible liquid before attempting to power on the device, personally i would pull the back cover off and unscrew the back side of the case exposing the main board just to get a better look but not everyone is going to be comfortable with that.
What i did that worked:
Get a ziplock back filled it with rice. Put your phone without Battery, sim, sd card, backplate in the bag with rice. Set the bag with contents on the top of your refrigerator where it is slightly warm, let it sit for 48 hours. Take it out after 48 hrs (it should have all the moisture out of the phone at this point) put the battery, sim, sd, etc back in and fire it up. Cross your fingers at this point
Best bet jar/ bowl of rice,, pull sim sd card put BOTH batt and phone into rice!!! batt has a chip in it, wait for at LEAST 3 days every day shift phone in the rice<<< moves dryer rice closer to phone, after 3 days pull phone out of the rice, THEN grab a can o air, spray air into phone, To see if any water still in phone,, if so 2 more days if not cross fingers put it togather and see if it works,, DO not put in OVEN plastic warps!
Well I'm at work now, it's been over 50 hrs I stuck it in rice, so it'll be like Christmas in October for me when I get home, or not.....
Sent from my HTC One XL using xda premium
Please update us, and tell us whether it works or not
Sent from my SGH-I747 using xda app-developers app
Will do
Sent from my HTC One XL using xda premium
Oh **** son! Check the Sig *****. Yeaha!
Sent from my SGH-I747M using xda premium
I managed go spill tea on mine, not sure if it leaked through the earphone or home button. Within 2 hours I had driving mode turn on/off randomly and the next day it did the same with usb and now it turns off randomly. To my knkwledge, the water damage indicators havent been tripped, should I take a gamble and take it back to rogers?
Sent from my SGH-I747M using xda premium
Are you asking for advice on whether or not you should attempt to steal from the phone company to make up for your mistake? I mean besides hijacking someone else's thread...
Speaker F***ed, headphone jack not working
so the main interface works great but, i'd rather throw it in the garbage now that it always says the headphones are plugged in, and the speaker is all static crackles an ****ty. so does anyone know where I can find and unroot guide for the Rogers GS3?
http://www.ebay.com/itm/Samsung-Gal...224?pt=LH_DefaultDomain_0&hash=item2575cb8978
I cant be certain it fits, but looking at the connectors in the picture it appears to be compatible, and for 9 bucks i would try it personally before i did anything drastic. Not sure how much the shipping would run to Canada but its got to be less than an insurance deductible.
EDIT - Found one here already in Canada - http://www.ebay.com/itm/Samsung-Gal...656?pt=LH_DefaultDomain_2&hash=item20cc33ab08
Rice works, but something a little more powerful are various "thirst bags" that you can buy anywhere on the internet. They work similarly to the rice option but work with a much higher fix rate. This link is to one thats $9.99 http://www.ifixit.com/Tools/Thirsty-Bag/IF145-163 good luck
Remember to slap that thanks button
So did you figure out your pumpkin dilemma ?Just wondering..
I keep a bag of about 150 or so Dessicant dryer bags in one of those vacuum seal jars, just in case. They are cheap and easy and work better then rice. I would say getting a bag of 200 of them cost me about $20.00 Keeping them in the vac sealed jar keeps them from sucking the moisture out of the air.
Worked WONDERS on my day care providers iphone.
Well. I frigged around with pluggin headphones in and making the phone heat up. now it works, just like new, except I know it's been spoiled with poop water!
sixty_oz said:
Well. I frigged around with pluggin headphones in and making the phone heat up. now it works, just like new, except I know it's been spoiled with poop water!
Click to expand...
Click to collapse
Make sure to mention that when you eventually sell your phone :laugh:.
So it stopped working again but I found an app that overrides the headphones sensor. It's called toggleheadset2. https://play.google.com/store/apps/details?id=com.dwalkes.android.toggleheadset2 brilliant!
Sent from my SGH-I747M using xda premium