Develop Bugs

[Q] Doomkernel wifi problems even with CWM installed (ARC)

Hi guys,
I have a SE ARC and installed the Doomkernel V15 with fastboot. Now when I boot I have the doomkernel logo and all, I have installed the V15 modules which came for the V15 kernel. However, I went to recovery mode by pressing the volume buttons and there, I installed the zipfile from my SDcard, and the rebooted again but yet no Wifi. It gives me an error, is there something I've missed out?
I have searched all day long since yesterday, I still haven't diagnosed where I went wrong.
All help would be appreciated
Thanks you!

Try to reflash his kernel and Wi-Fi modules.

I did flash his V15 kernel mutiple times, and reinstalled the CWM zipfile more than once.. Still no Wifi though.
Is there a wifi module apart from his V15 modules pack?

As far as I know there isn't a Wi-Fi module apart from his modules pack.
Have you followed the right steps?
DooMLoRD said:
[ how to install my kernel (v14 onwards) ]
download the boot.img & modules update.zip
save the boot.img in the folder with fastboot binaries (fastboot.exe files)
save the modules update.zip to sdcard (on phone)
power down device
start device in fastboot mode
use the following command to flash the boot.img
Code:
fastboot flash boot boot.img
reboot phone and enter recovery
flash the wifi modules update.zip for my kernel
reboot phone and enjoy the kernel
Click to expand...
Click to collapse

I guess I did,
I have downloaded the
[ARC/ARC S] DooMKernel (v15) (FW: 4.0.2.A.0.42) with modCWM-v04 TouchEdition Recovery [ 2.0Ghz version ]
Which works, cause it boots with his logo.
and I have downloaded the
ARC-DooMKernel-v15-modules_CWM.zip
Which are the modules.
After that I went to recovery, from there I have installed the zipfile from my SD card, and yet no wifi.

Try to flash only the modules again.
Sent from my LT18i using XDA Premium App

I did that too, the modules multiple times.. I kinda need it for work and messed it up

Testing before and after installing the ROM with the CWM:
Wipe the following in CWM Recovery:
Factory Reset (Full wipe)
Wipe Cache Partition
Wipe Dalvik Cache

ROM or Kernel?
I have just downloaded the Doomkernel V15 and used fastboot with cmd and flashed boot.img inside. And then put the CWM zipfile into my SD card after that installed with recovery.
I've tried but still no succes, Wiped everything and yet it gives me an error with wifi

The only thing that happens to me is start from 0, first installed stock SE 4.0.2.A.0.42 FW + Root and after continues.

I've installed an clean fw which worked fine but it was 3xxxxxx. I've tried to update it via wifi but sad to see, it turned off while doing it and now it's bricked. I tried reflash the fw but it ain't working. I have this green flickering led when I press the powerbutton. When I connect it via USB it will get to flash mode automaticly, battery pull nothing worked. I can't get into any other modes than the flashmode.
I HAVE SOLVED !!!!! For those who are experiencing this problem.
First, install the software support Sony, which installs the correct driver usb, then run the bootloader relock using the flashtool (ver 0.2.9.1), then run the unlocking bootoader with flashboot, after flashing with the correct firmware using flashtool, then run again with relock flashtool and turn it!!!
thanks to all
Click to expand...
Click to collapse
As you can see, I've found this on the net. I quite don't understand what he did as his english ain't that good. Do you guys know what he eventually means? "Relock flashtool"?

http://forum.xda-developers.com/showthread.php?t=1134335

Haha, thanks a bunch.. Just relocking the bootloader worked fine here.
Now, I just want to update the fw with Sony's original updater inside the android and flash the doomkernel in it. For instance, when I flash the doomkernel in it with the modules, Do I have to boot my phone between flashing kernel and installing the modules?

Sorry for double post, but thanks a bunch guys!
Wifi works with V15 doomkernal now

hi all...
I had the 0% battery issue so I installed the patch and its ok now..but the wifi not working and I installed the mod via recovery and the wifi still not working,,,,pleassse help asap...
build no. 4.0.2.A.0.42
android v2.3.4

[Q] How to install DooMLoRD's WiFi Modules?

How do you install DooMLoRD's WiFi Modules?
Also for some reason i cant boot in to Recovery
Running a R800x CDMA
Well no kernel because i'm locked and CBTweaked0

We need more info. Rom? Kernel?

formatme said:
How do you install DooMLoRD's WiFi Modules?
Also for some reason i cant boot in to Recovery
Running a R800x CDMA
Well no kernel because i'm locked and CBTweaked0
Click to expand...
Click to collapse
If you've installed the kernel correctly, put "wifi modules "zip" in the main sdcard folder.
Reboot your device and when you see the doomlord's logo, press back button a few times.
Now you are in "boot manager": Select "any boot recovery" displayed.
Then, choose "apply update from sdcard" if you have put the zip in main folder or "choose zip from sdcard" if you have put the zip in another folder.
apply and ready.
Reboot your device again.

formatme said:
How do you install DooMLoRD's WiFi Modules?
Also for some reason i cant boot in to Recovery
Running a R800x CDMA
Well no kernel because i'm locked and CBTweaked0
Click to expand...
Click to collapse
You need to (1) be rooted and (2) have CWM installed. If you don't have that yet, you can download a version as an app from Google Play. Just look for CWM for Xperia or something like that.
Also - which wifi modules are you trying to install? With a locked bootloader, you're very limited as to which ROMs you can use (Forget ICS). Make sure the wifi modules you are trying to load are compatible with the stock ROM you want to use.
Finally, you will need to use the menu option in recovery "install zipfile from sdcard". You will need to have copied that zip file to the sdcard previously and do not unzip it.
Luck

i have had the problem like you. i had to flash my firmware again using flashtool.then u install the cwm recovery with the play store app and just in case with the cwm auto installer for the pc i provided. then follow the instructions for gbtweaked. after u restore the nandroid for gbtweaked immediately reboot the phone. make sure u have doomlord's wifi modules in the root of your sd card. boot into recovery and click the option, install zip from sd card and select the wifi modules. reboot the phone and there it should work.

DooMLoRD kernels come with CWN, why install another? just go into recovery and flash it as stated in his thread.

TheCraig said:
DooMLoRD kernels come with CWN, why install another? just go into recovery and flash it as stated in his thread.
Click to expand...
Click to collapse
Because he has a locked boot loader so he can't flash a kernel.
Sent from my R800x using XDA

[Q] Supercharge went wrong

Hallo, yesterday i supercharged my phone xperia arc with latest ICS update .587,
i used v6 supercharger (V6_SuperCharger_for_Android-Update 11)
i had busy box v1.8.4, while supercharging it asked me about services.jar and services.odex, and it said to me that i had an old one (cause i did supercharged my phone when it was on .487 too) and i pressed to use the old services ... when the supercharge ended and my phone restarted it took like 10 minutes and i saw it was keep restarting and restarting, i re-entered my battery near 30 times and re - opened it but still the same, i tried to hard reset, with all the ways i could and nothing happened, and now my phone doesnt open at all, only restarts and restarts..
Any idea how i can fix this?

Every single tut starts with "make nandroid backup"... but, maybe try to prepare zip for cwm with services.jar and odex from stock 587 and flash. It isn't hard
[email protected] S

wzearsdcx said:
Every single tut starts with "make nandroid backup"... but, maybe try to prepare zip for cwm with services.jar and odex from stock 587 and flash. It isn't hard
[email protected] S
Click to expand...
Click to collapse
so the only way to fix my phone is by flash tool?
and where i can find Supercharged services.jar and services.odex for Arc 587?? i did a small search and didint find anything

MindPhreak said:
so the only way to fix my phone is by flash tool?
Click to expand...
Click to collapse
Prepare zip and use cwm to apply. If you have locked bootloader - pc companion has repair option. So, tell us - do you have working cwm, is it from x-parts or kernel?
[email protected] S

wzearsdcx said:
Prepare zip and use cwm to apply. If you have locked bootloader - pc companion has repair option. So, tell us - do you have working cwm, is it from x-parts or kernel?
TapTapTa[email protected] S
Click to expand...
Click to collapse
i dont have cwm but my bootloader is unlocked

MindPhreak said:
i dont have cwm but my bootloader is unlocked
Click to expand...
Click to collapse
so maybe use flashtool
flash kernel with cwm here! or search method here
prepare zip with original services files (saved in supercharge folder in "backup" - files with .bak extensions)
flash it with cwm OR flash complete ROM
Maybe I'm wrong, but I always make backups and know only theory :laugh:
or wait for someone else reply

wzearsdcx said:
so maybe use flashtool
flash kernel with cwm here!
prepare zip with original services files (saved in supercharge folder in "backup" - files with .bak extensions)
flash with cwm
Maybe I'm wrong, but I always make backups and know only theory :laugh:
or wait for someone else reply
Click to expand...
Click to collapse
there is not any 4.1.B.0.587 kernel for my phone on this

MindPhreak said:
there is not any 4.1.B.0.587 kernel for my phone on this
Click to expand...
Click to collapse
I added second url. You will find there how to install cwm and flash rom with that.
OR install complete rom with flashtool ;p
[email protected] S

wzearsdcx said:
I added second url. You will find there how to install cwm and flash rom with that.
OR install complete rom with flashtool ;p
[email protected] S
Click to expand...
Click to collapse
just installed custom kernel again and it worked

Greaat, now I can sleep in calm
[email protected] S

[Q] Can't put CWM onto my Xperia Arc after using EMMA

Hi,
I have tried everything I've read so far and I still can't get the phone to boot into recovery.
I flashed the latest Stock ROM using Sony Ericsson 'Emma' flashtool.
Then I rooted using eroot and I have confirmed the root with the app Root Checker.
I installed ROM Manager but it says my device isn't recognised.
Also installed X-Parts and even though that said ClockWorkMod install was successful it still won't boot into recovery.
I have tried holding down various combination of keys whilst powering up but I don't even see a blue light appearing.
Is there any way to get CWM onto my Xperia Arc (LT15i) please?
Thanks for any advice

Flash a kernel that has CWM using fastboot.
僕のLT18iから送られてきた

popthosegaskets said:
Flash a kernel that has CWM using fastboot.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Hi popthosegaskets, thanks for replying. How would I go about finding the right kernal and how do I flash the phone if I can't get into recovery please?
I did flash my phone before with CM 9 but I've completely forgotten how to do it.
Thanks again

GoodGosh said:
Hi popthosegaskets, thanks for replying. How would I go about finding the right kernal and how do I flash the phone if I can't get into recovery please?
I did flash my phone before with CM 9 but I've completely forgotten how to do it.
Thanks again
Click to expand...
Click to collapse
The kernel will depend on your ROM, so if you're using stock ROM you can flash a stock kernel with CWM on it. LuPuS stock kernel and Advanced stock kernel are two examples of stock kernel that have CWM.
Most custom ROM kernel should have CWM installed. Custom ROM will also come with its kernel so flash that and you should have CWM on your phone.
僕のLT18iから送られてきた

popthosegaskets said:
The kernel will depend on your ROM, so if you're using stock ROM you can flash a stock kernel with CWM on it. LuPuS stock kernel and Advanced stock kernel are two examples of stock kernel that have CWM.
Most custom ROM kernel should have CWM installed. Custom ROM will also come with its kernel so flash that and you should have CWM on your phone.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Hi popthosegaskets, thanks very much for helping me. I was wondering if you could tell me where I'm going wrong trying to install a CM Rom please. I've tried both CM 9 and CM 10 but the former caused the boot screen to flicker and flash and when I tried to install CM 10 I just got an error in CMW saying error in sdcard/cm10.zip (status 7).
The problem stems from me experimenting and putting on the Jellybeanv4 Rom. I found that the Settings button didn't function and overal performance was slow so that is why I'm trying to flash back to a Stable CM Rom.
These are the instructions I followed using flashtool.
1. Download rom, patch and gapps from Downloads and put in SD card
2. Flash Xperia Arc S 4.1.B.1.13 Vodafone DE firmware via flashtool (For increasing system and data memory for Arc user and latest BB) Must
3. Flash included FXP kernel or any CM10 based kernel using fastboot
4. Boot into CWM
5. Wipe factory reset (Data & Cache)
6. Go mounts and storage
7. Format /system
8. Flash rom then patch and at last gapps
9. Reboot
10. After booting 1 time you can flash addons if you want
Is it a problem with a conflict with the Vodafone DE Firmware and CM Rom?
Thanks again for your help and advice

I have same problem...
Same rom and same instalation guide...
Any solution to get in CWM?

GoodGosh said:
Hi popthosegaskets, thanks very much for helping me. I was wondering if you could tell me where I'm going wrong trying to install a CM Rom please. I've tried both CM 9 and CM 10 but the former caused the boot screen to flicker and flash and when I tried to install CM 10 I just got an error in CMW saying error in sdcard/cm10.zip (status 7).
The problem stems from me experimenting and putting on the Jellybeanv4 Rom. I found that the Settings button didn't function and overal performance was slow so that is why I'm trying to flash back to a Stable CM Rom.
These are the instructions I followed using flashtool.
1. Download rom, patch and gapps from Downloads and put in SD card
2. Flash Xperia Arc S 4.1.B.1.13 Vodafone DE firmware via flashtool (For increasing system and data memory for Arc user and latest BB) Must
3. Flash included FXP kernel or any CM10 based kernel using fastboot
4. Boot into CWM
5. Wipe factory reset (Data & Cache)
6. Go mounts and storage
7. Format /system
8. Flash rom then patch and at last gapps
9. Reboot
10. After booting 1 time you can flash addons if you want
Is it a problem with a conflict with the Vodafone DE Firmware and CM Rom?
Thanks again for your help and advice
Click to expand...
Click to collapse
Sorry for very late reply, but it should not be a problem with DE firmware. Download the file again and try to install it following the steps.
iggy1974 said:
I have same problem...
Same rom and same instalation guide...
Any solution to get in CWM?
Click to expand...
Click to collapse
僕のLT18iから送られてきた

Solved boot in CWM
popthosegaskets said:
Sorry for very late reply, but it should not be a problem with DE firmware. Download the file again and try to install it following the steps.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
I've found solutions for LT18i
downloaded kernel
http://goo.im/devs/nAa/kernels/3.4.x/jb/anzu/3.4.45-nAa-03_LT18.img

Anyone capable of unlocking bootloader R800x?

Unfortunately, my bootloader is locked and I don't even have a status to see if my bootloader status can be unlocked when I type in the code to my Xperia Play. Now, I've read that some people have R800x unlocked, and i'm interested if anyone here (trustworthy), does it? I am also willing to pay...
Most people say go to "Alejandrissimo", however, his website doesn't seem to exist anymore. I sent him an email but i'm not too sure how good that will work. If anyone knows of a trustworthy website or anything that would help very much.

AchillesNo1 said:
Unfortunately, my bootloader is locked and I don't even have a status to see if my bootloader status can be unlocked when I type in the code to my Xperia Play. Now, I've read that some people have R800x unlocked, and i'm interested if anyone here (trustworthy), does it? I am also willing to pay...
Most people say go to "Alejandrissimo", however, his website doesn't seem to exist anymore. I sent him an email but i'm not too sure how good that will work. If anyone knows of a trustworthy website or anything that would help very much.
Click to expand...
Click to collapse
Just unlock it via [SONY]. That's how I unlocked my R800x.

ATTACK said:
Just unlock it via [SONY]. That's how I unlocked my R800x.
Click to expand...
Click to collapse
how were you able to do that when step #2 says:
"In your device, tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked."

AchillesNo1 said:
how were you able to do that when step #2 says:
"In your device, tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked."
Click to expand...
Click to collapse
Skip #2, The R800x is different then the rest of the Xperia Play line. Just enter your MEID to get your code and then follow the steps to unlock.

ATTACK said:
Skip #2, The R800x is different then the rest of the Xperia Play line. Just enter your MEID to get your code and then follow the steps to unlock.
Click to expand...
Click to collapse
Wow, I believe it worked. The CMD prompt appeared to be all good and same with my unlock key. Now, what do I do?... How do I know which kernel my Xperia Play can use?

AchillesNo1 said:
Wow, I believe it worked. The CMD prompt appeared to be all good and same with my unlock key. Now, what do I do?... How do I know which kernel my Xperia Play can use?
Click to expand...
Click to collapse
Install Recovery [XParts] [Xparts Thread]
As for the kernel I suggest DoomKernel. [DoomKernel Thread] [(CDMA) DoomKernel Download Link]
EDIT:
I believe DoomKernel has built in recovery. I dont remember... it's been a long time since I played with my R800x. Also stop by this [THREAD].

ATTACK said:
Install Recovery [XParts] [Xparts Thread]
As for the kernel I suggest DoomKernel. [DoomKernel Thread] [(CDMA) DoomKernel Download Link]
EDIT:
I believe DoomKernel has built in recovery. I dont remember... it's been a long time since I played with my R800x. Also stop by this [THREAD].
Click to expand...
Click to collapse
Ok, so I have X-parts downloaded. Now I have no clue what to do. I wasn't sure which kernel to download
[CDMA][v2] DoomKernel + WiFi Drivers.zip
[GSM][v14] DoomKernel.rar
However, you put CDMA, so I'm assuming the CDMA one. How do I put that onto my phone though?

AchillesNo1 said:
Ok, so I have X-parts downloaded. Now I have no clue what to do. I wasn't sure which kernel to download
[CDMA][v2] DoomKernel + WiFi Drivers.zip
[GSM][v14] DoomKernel.rar
However, you put CDMA, so I'm assuming the CDMA one. How do I put that onto my phone though?
Click to expand...
Click to collapse
Yes, the R800x is CDMA. If you're NOT going to use your R800x as a phone (call, sms, etc...), then it doesn't matter. You also don't need X-Parts if you're going to use DoomKernel as it has it's own recovery built in. Doom explains how to flash his kernel in his [THREAD] or you could use Flashtools. Also here is a [LINK] on how to enter recovery on DoomKernel.

ATTACK said:
Yes, the R800x is CDMA. If you're NOT going to use your R800x as a phone (call, sms, etc...), then it doesn't matter. You also don't need X-Parts if you're going to use DoomKernel as it has it's own recovery built in. Doom explains how to flash his kernel in his [THREAD] or you could use Flashtools. Also here is a [LINK] on how to enter recovery on DoomKernel.
Click to expand...
Click to collapse
Wow this is awesome, I read his tutorial and I have doom kernel on my play. Only problem is that I am without wifi, I read his tutorial, but I do not know how to do this part:
reboot phone and enter recovery
flash the wifi modules update.zip for my kernel
reboot phone and enjoy the kernel
now that i have a custom kernel though, how would I go about putting new roms onto my play?

AchillesNo1 said:
Wow this is awesome, I read his tutorial and I have doom kernel on my play. Only problem is that I am without wifi, I read his tutorial, but I do not know how to do this part:
reboot phone and enter recovery
flash the wifi modules update.zip for my kernel
reboot phone and enjoy the kernel
now that i have a custom kernel though, how would I go about putting new roms onto my play?
Click to expand...
Click to collapse
To Flash the Wifi Modules you need to enter the Recovery, here is how you do it:
[How to enter Recovery]
Entry key is the BACK button
There are multiple notifications to tell you when to press the entry key:
LED will light up to BLUE
The phone will vibrate when its waiting for keypress
Thats it you should now enter DoomKernel Custom Recovery
[How to use/navigate in recovery]
BACK button to GO BACK
SEARCH button to SELECT
HOME button to GO UP
MENU button to GO DOWN
[How to Flash any .zip file]
Select "install zip from sdcard"
Select "chose zip from sdcard"
Find the .zip file that you want to Flash and selected
Click "Yes - Install..."
Wait until it finishes, Reboot and enjoy
This applies to any .zip file(ROM,Mod,Module)

TheScriptKitty said:
To Flash the Wifi Modules you need to enter the Recovery, here is how you do it:
[How to enter Recovery]
Entry key is the BACK button
There are multiple notifications to tell you when to press the entry key:
LED will light up to BLUE
The phone will vibrate when its waiting for keypress
Thats it you should now enter DoomKernel Custom Recovery
[How to use/navigate in recovery]
BACK button to GO BACK
SEARCH button to SELECT
HOME button to GO UP
MENU button to GO DOWN
[How to Flash any .zip file]
Select "install zip from sdcard"
Select "chose zip from sdcard"
Find the .zip file that you want to Flash and selected
Click "Yes - Install..."
Wait until it finishes, Reboot and enjoy
This applies to any .zip file(ROM,Mod,Module)
Click to expand...
Click to collapse
I turned off the phone and held the back button and all I got was a green LED...

AchillesNo1 said:
I turned off the phone and held the back button and all I got was a green LED...
Click to expand...
Click to collapse
You do not have to hold the Back Button you need to press it multiple times(As it boots up).
BTW you are using DoomKernel Version 3, right?

TheScriptKitty said:
You do not have to hold the Back Button you need to press it multiple times(As it boots up).
BTW you are using DoomKernel Version 3, right?
Click to expand...
Click to collapse
Oh no! I am using v2
What does this mean? If it means I have to get v3, I think I may want to use what you have, LuPuS instead since it seems more popular. I also feel it is more easier. But I am so confused with what .FTF files are, kernels, and ROMs. I'd like to just be able to use the new 4.1.2 jellybean rom and have it completely working with overclock, but that seems impossible..

AchillesNo1 said:
Oh no! I am using v2
What does this mean? If it means I have to get v3, I think I may want to use what you have, LuPuS instead since it seems more popular. I also feel it is more easier. But I am so confused with what .FTF files are, kernels, and ROMs. I'd like to just be able to use the new 4.1.2 jellybean rom and have it completely working with overclock, but that seems impossible..
Click to expand...
Click to collapse
Okay, first the way you enter the Costume Recovery on both Doomkernel V2 and V3 should be about the same.
FTF stands for Flash Tool Firmware(or Flash Tool File) they can be both Official Firmwares or Costume Kernels.
The Kernel(.img or .ftf) is basically whats between the Hardware and the Software(the OS and applications)
And the ROM can be described as the Operating System.
If you want you could use what I use:
Lupus Kernel Version 13 and Racing SPEED EDITION EOL ROM

TheScriptKitty said:
Okay, first the way you enter the Costume Recovery on both Doomkernel V2 and V3 should be about the same.
FTF stands for Flash Tool Firmware(or Flash Tool File) they can be both Official Firmwares or Costume Kernels.
The Kernel(.img or .ftf) is basically whats between the Hardware and the Software(the OS and applications)
And the ROM can be described as the Operating System.
If you want you could use what I use:
Lupus Kernel Version 13 and Racing SPEED EDITION EOL ROM
Click to expand...
Click to collapse
Well, I think I just messedu p big time... So frustrating. Now I put LuPuS 480 v8 on it and it is stuck in a bootloop... Is there anyway to fix this?

AchillesNo1 said:
Well, I think I just messedu p big time... So frustrating. Now I put LuPuS 480 v8 on it and it is stuck in a bootloop... Is there anyway to fix this?
Click to expand...
Click to collapse
Just Flash a Costume ROM

TheScriptKitty said:
Just Flash a Costume ROM
Click to expand...
Click to collapse
Oh ok, so how do I flash the Racing Speed Edition one?
I downloaded it.

AchillesNo1 said:
Oh ok, so how do I flash the Racing Speed Edition one?
I downloaded it.
Click to expand...
Click to collapse
I'm guessing that you downloaded the ROM to your computer, in that case you have to move it to your phone's MicroSD Card. There are two way of doing this(Since you are stuck on a bootloop), the first is to remove the MicroSD Card from your phone and use a MicroSD Card Adapter to move the ROM from your PC to the MicroSD Card. The other way would be to enter the Recovery(while its powering on press the Voulume- Button Multiple times) and mounting it.
Once you have the ROM on your Phone's MicroSD Card you can flash it by selecting "intall zip from sdcard"(In the Costume Recovery)

TheScriptKitty said:
I'm guessing that you downloaded the ROM to your computer, in that case you have to move it to your phone's MicroSD Card. There are two way of doing this(Since you are stuck on a bootloop), the first is to remove the MicroSD Card from your phone and use a MicroSD Card Adapter to move the ROM from your PC to the MicroSD Card. The other way would be to enter the Recovery(while its powering on press the Back Button Multiple times) and mounting it.
Once you have the ROM on your Phone's MicroSD Card you can flash it by selecting "intall zip from sdcard"(In the Costume Recovery)
Click to expand...
Click to collapse
Ok sweet, I've learned how to do the custom kernel and recovery. I'm almost done asking you a ton of questions (I appreciate you a ton, I tried looking through guides and was severely confused since this is my first Android altogether). Now I ultimately decided on using Doom Kernel because it comes with CWM, which is nice. However, are there any roms with 4.1.2 that work with Doom Kernel? Upon looking I didn't find any in the rom area.

AchillesNo1 said:
Ok sweet, I've learned how to do the custom kernel and recovery. I'm almost done asking you a ton of questions (I appreciate you a ton, I tried looking through guides and was severely confused since this is my first Android altogether). Now I ultimately decided on using Doom Kernel because it comes with CWM, which is nice. However, are there any roms with 4.1.2 that work with Doom Kernel? Upon looking I didn't find any in the rom area.
Click to expand...
Click to collapse
I think DoomKernel is only compatible with GB and ICS ROMs, if you want to get JB you need to use Lupus Kernel or Turbo Kernel. IDK why the Recovery would be important but Lupus Kernel also has CWM Recovery(All Costume Kernels have some type of Costume Recovery).
EDIT:
In Lupus Kernel you can chose what Recovery to use(CWM or TWRP)