Hi guys,
I have a SE ARC and installed the Doomkernel V15 with fastboot. Now when I boot I have the doomkernel logo and all, I have installed the V15 modules which came for the V15 kernel. However, I went to recovery mode by pressing the volume buttons and there, I installed the zipfile from my SDcard, and the rebooted again but yet no Wifi. It gives me an error, is there something I've missed out?
I have searched all day long since yesterday, I still haven't diagnosed where I went wrong.
All help would be appreciated
Thanks you!
Try to reflash his kernel and Wi-Fi modules.
I did flash his V15 kernel mutiple times, and reinstalled the CWM zipfile more than once.. Still no Wifi though.
Is there a wifi module apart from his V15 modules pack?
As far as I know there isn't a Wi-Fi module apart from his modules pack.
Have you followed the right steps?
DooMLoRD said:
[ how to install my kernel (v14 onwards) ]
download the boot.img & modules update.zip
save the boot.img in the folder with fastboot binaries (fastboot.exe files)
save the modules update.zip to sdcard (on phone)
power down device
start device in fastboot mode
use the following command to flash the boot.img
Code:
fastboot flash boot boot.img
reboot phone and enter recovery
flash the wifi modules update.zip for my kernel
reboot phone and enjoy the kernel
Click to expand...
Click to collapse
I guess I did,
I have downloaded the
[ARC/ARC S] DooMKernel (v15) (FW: 4.0.2.A.0.42) with modCWM-v04 TouchEdition Recovery [ 2.0Ghz version ]
Which works, cause it boots with his logo.
and I have downloaded the
ARC-DooMKernel-v15-modules_CWM.zip
Which are the modules.
After that I went to recovery, from there I have installed the zipfile from my SD card, and yet no wifi.
Try to flash only the modules again.
Sent from my LT18i using XDA Premium App
I did that too, the modules multiple times.. I kinda need it for work and messed it up
Testing before and after installing the ROM with the CWM:
Wipe the following in CWM Recovery:
Factory Reset (Full wipe)
Wipe Cache Partition
Wipe Dalvik Cache
ROM or Kernel?
I have just downloaded the Doomkernel V15 and used fastboot with cmd and flashed boot.img inside. And then put the CWM zipfile into my SD card after that installed with recovery.
I've tried but still no succes, Wiped everything and yet it gives me an error with wifi
The only thing that happens to me is start from 0, first installed stock SE 4.0.2.A.0.42 FW + Root and after continues.
I've installed an clean fw which worked fine but it was 3xxxxxx. I've tried to update it via wifi but sad to see, it turned off while doing it and now it's bricked. I tried reflash the fw but it ain't working. I have this green flickering led when I press the powerbutton. When I connect it via USB it will get to flash mode automaticly, battery pull nothing worked. I can't get into any other modes than the flashmode.
I HAVE SOLVED !!!!! For those who are experiencing this problem.
First, install the software support Sony, which installs the correct driver usb, then run the bootloader relock using the flashtool (ver 0.2.9.1), then run the unlocking bootoader with flashboot, after flashing with the correct firmware using flashtool, then run again with relock flashtool and turn it!!!
thanks to all
Click to expand...
Click to collapse
As you can see, I've found this on the net. I quite don't understand what he did as his english ain't that good. Do you guys know what he eventually means? "Relock flashtool"?
http://forum.xda-developers.com/showthread.php?t=1134335
Haha, thanks a bunch.. Just relocking the bootloader worked fine here.
Now, I just want to update the fw with Sony's original updater inside the android and flash the doomkernel in it. For instance, when I flash the doomkernel in it with the modules, Do I have to boot my phone between flashing kernel and installing the modules?
Sorry for double post, but thanks a bunch guys!
Wifi works with V15 doomkernal now
hi all...
I had the 0% battery issue so I installed the patch and its ok now..but the wifi not working and I installed the mod via recovery and the wifi still not working,,,,pleassse help asap...
build no. 4.0.2.A.0.42
android v2.3.4
Related
Hi Guys,
Sorry to be such a noob, but i really need some help...
I have tried flashing this: http://forum.xda-developers.com/showthread.php?t=1526717
using the Xperia version of CWM recovery, follwing the instructions on screen t the letter, i still cannot get this to work. Can someone please shed some light on my problem???
I have no issues with re-flashing 2.3.4 again, phone is rooted with unlocked bootloader, flashed on 4.0.2.A..0.42/.62 and still only end up with a non working ICS, please help
If you're trying to flash this rom from gingerbread you'll end up with troubles. Flash first a stock ics with flashtools /pc companyon /seus and then you can flash this one.
garisan said:
If you're trying to flash this rom from gingerbread you'll end up with troubles. Flash first a stock ics with flashtools /pc companyon /seus and then you can flash this one.
Click to expand...
Click to collapse
Thanks for this, but stock ics is not yet available in nz, any links you could share for download will be greatly appreciated
Started from gingerbread too.
Hy, i have also upgraded from Gingerbread and i have had some issues with some Roms. But now it`s done and working like a charm. Here are the stept i folowed :
1. Unlock bootloader.
2. Check baseband (mine was 64, so no more stept necesary for performing step 3)
3. Flash kernel via fastboot (cmd command on android sdk/platform tools, with v4 usb drivers), Doom Kernel (1.6GHz) ARC-DooMKernel-ICS-BETA-v04-lower-boot.img
4. Flashed multiple Roms, but the best, for me is JJHybrid Rom v2.2
5. Flashed ARC-DooMKernel-ICS-v04-modules_CWM.zip (WIFI module)
6. Flashed GAPS
When flashing Rom i have notice that not everibody tells all the procedure :
- Boot in flash mode (Press Back key when blue led light on)
- Perform a wipe
- Perform a reset
- advanced/ wipe dalvik cache
- mount and root/ format /system
- install from zip, first rom, then modules.
Hope that you can find sommething you missed (probably the format /system) and my answer helped you !
Marmalux said:
Hy, i have also upgraded from Gingerbread and i have had some issues with some Roms. But now it`s done and working like a charm. Here are the stept i folowed :
1. Unlock bootloader.
2. Check baseband (mine was 64, so no more stept necesary for performing step 3)
3. Flash kernel via fastboot (cmd command on android sdk/platform tools, with v4 usb drivers), Doom Kernel (1.6GHz) ARC-DooMKernel-ICS-BETA-v04-lower-boot.img
4. Flashed multiple Roms, but the best, for me is JJHybrid Rom v2.2
5. Flashed ARC-DooMKernel-ICS-v04-modules_CWM.zip (WIFI module)
6. Flashed GAPS
When flashing Rom i have notice that not everibody tells all the procedure :
- Boot in flash mode (Press Back key when blue led light on)
- Perform a wipe
- Perform a reset
- advanced/ wipe dalvik cache
- mount and root/ format /system
- install from zip, first rom, then modules.
Hope that you can find sommething you missed (probably the format /system) and my answer helped you !
Click to expand...
Click to collapse
Thanks for this friend, i was only using a stock rom, will find dwnloads for the kernel mentioned above.
I did all of these instruction except I have no idea how to roo once i boot into recovery as the xperia CWM does not have this function and for some reason no other recovery will work on my arc.
Will download DoomLoords kernel and see how that goes...Cheers
reignzy said:
Thanks for this, but stock ics is not yet available in nz, any links you could share for download will be greatly appreciated
Click to expand...
Click to collapse
Here you have the download links for the rom and flashtool
http://forum.xda-developers.com/showthread.php?t=1598072
Thanks to all who helped with my problem, turns out my phone was in fact "not boot loader unlocked" but it is now
Found out where I was going wrong with flashing kernels as well
Once again, a very big thanks to all that helped
Sent from my LT15i using XDA
After installing a custom ROM onto my xperia arc the wifi doesn't work.
my phone is rooted and I installed custom rom xperia Ultimate HD
the bootloader is not unlocked
the phone is fully working except for wifi
this is the answer of the developer of the rom:
Q 4: My WiFi doesn't work. What can I do?
A: Flash WiFi Modules for your Kernel. If you are on stock kernel, reflash stock WiFi Modules. If that, doesn't work, reflash the ROM and Check MD5 Sums.
Click to expand...
Click to collapse
but I don't understand what to do.
I have flashed a .ftf kernel file before using flashtool but when I search and download wifi modules I got some files, but no .ftf files, so I can't flash it using flashtool
when I try to switch on wifi it just gets stuck before is is switched on and it doesn't even scan.
is there anyone that could help me with this problem please?
You need to flash them with CWM.
XperienceD said:
You need to flash them with CWM.
Click to expand...
Click to collapse
could you please tell me how to do that.
CWM is not installed on the phone(well, I can't find it) and I can't download it since wifi is not working
I do have some .apk files on my sd-card like ROMManager but I don't know how to access them
willembier said:
could you please tell me how to do that.
CWM is not installed on the phone(well, I can't find it) and I can't download it since wifi is not working
Click to expand...
Click to collapse
It's included in the recommended kernel, or use X-Parts
Recommend Rush Kernel V10, it has CWM included allready.
Lupus 9 aswell as Radeon 3 also got it
just flash the kernel via flashtool in fastboot mode, enter cwm by holding volume button down and flash your desired wifi modules attached in each kernel thread
CWM Installation on Locked Bootloader
willembier said:
could you please tell me how to do that.
CWM is not installed on the phone(well, I can't find it) and I can't download it since wifi is not working
I do have some .apk files on my sd-card like ROMManager but I don't know how to access them
Click to expand...
Click to collapse
I guess you are still on locked bootloader. Follow the steps to flash Wifi Modules:
Follow the link X-Parts to install CWM from Playstore.
Download Stock Wifi Module(.zip file) and place it in SD card
Reboot your phone and boot into CWM by pressing volume rockers repeatedly during the boot
Select 'Install zip from SD card' and choose the Wifi module zip.
Select reboot to system and you are done!
Hope it helps!
wifi module
Where i can get wifi modules for xperia neo v lupus v8 ics kernel
satyawan0307 said:
Where i can get wifi modules for xperia neo v lupus v8 ics kernel
Click to expand...
Click to collapse
You are in the wrong section, this is Xperia Arc and Arc S section actually.
And if you would at least bother reading the first post of LuPuS kernel topic in Neo/NeoV development, you would see this
Wifi modules are built in
Click to expand...
Click to collapse
So either reboot until wifi is fixed or use terminal emulator to fix the WiFi. More info in the LuPuS kernel topic.
please where I can get wifi module for jelly vanilla z 7.1 ( live with walkan) ???????????
Hey guys so I'm in boot loop. Yes I know there are many guides all over saying how to fix it but I have tried many of them and they didnt work.
What happens is I start the phone, it shows the boot image and then restarts after a time.
I can boot into the Recovery mode by spamming the back button when the Logo comes. And can install zip files from the SD card.
I also have tried flashtool to restore it to stock but when i try flashing it detects my device "Device connected in flash mode" but when i try toflash it, it gives an error "Error flashing. Aborted".
I tried many many room whit kernels but stuck on bootloop every time, no way. I have never seen this problem before. Maybe bricked bootloader ?
I tried to relock the bootloader but doesnt help either.
Any help?
Ok, since you can boot into recovery can you flash you ROM.zip and try to boot into ROM? I also need some details:
- ROM you were using
- Kernel you were using
- How you got bootloop
Flashtool should work, try to recover using flashtool.
僕のLT18iから送られてきた
popthosegaskets said:
Ok, since you can boot into recovery can you flash you ROM.zip and try to boot into ROM? I also need some details:
- ROM you were using
- Kernel you were using
- How you got bootloop
Flashtool should work, try to recover using flashtool.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Before this happened i was using Ultimate HD 4.0 and Vengeance kernel ayame. The telephone was crashed and i didnt any backup. I tried to upgrade it to android 4.2 or 4.1 and the probleme begin I relocked the bootloader but doesnt help. I flashed it but doesnt accept any firmware, show Error flash bla bla bla Flash aborted. tried almost roms and kernels but doesnt help. I can install rooms and flash kernels, and boot up to recovery but after that is just stuck on boot animation or bootloop.:crying::crying::crying:
During the upgrade to JB, did you flash the kernel that came with it?
I assume you wanted to update to CM10/10.1? Vengeance Kernel is not compatible with JB. You need to flash UHD4 back to /system partition if you want to stick with UHD or flash the boot.img that came with the JB ROM.zip.
Do a clean install. Your phone should be working again if you do the steps correctly.
If you still have problems, you can reply to this thread or send me a PM if you wish to be more private about it.
Regards, 日焼けさん.
僕のLT18iから送られてきた
popthosega-skets said:
During the upgrade to JB, did you flash e ä'ökernel that came with it?
I assume you wanted to update to CM10/10.1? Vengeance Kernel is not compatible with JB. You need to flash UHD4 back to /system partition if you want to stick with UHD or flash the boot.img that came with the JB ROM.zip.
Do a clean install. Your phone should be working again if you do the steps correctly.
If you still have problems, you can reply to this thread or send me a PM if you wish to be more private about it.
Regards, 日焼けさん.9
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Thank you very much but i need steps . Plzz
Best regards
popthosegaskets said:
During the upgrade to JB, did you flash the kernel that came with it?
I assume you wanted to update to CM10/10.1? Vengeance Kernel is not compatible with JB. You need to flash UHD4 back to /system partition if you want to stick with UHD or flash the boot.img that came with the JB ROM.zip.
Do a clean install. Your phone should be working again if you do the steps correctly.
If you still have problems, you can reply to this thread or send me a PM if you wish to be more private about it.
Regards, 日焼けさん.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Sorry but i want tell you that the last i tried is this but doesnt help, stuck on boot animation. I gone be crazy.
OBS !!!!!! When i install rom and not working whit me i look on SD on pc if the installation files are there but nothing just the rom zip. I changed the SD but the same happened
Having issues realted to this one. Here's my device info. Hope it helps.
Device:
-> never been modded.
-> all stock rom.
-> stuck on a bootloop due to bluetooth.
It doesn't even have a recovery mod. So I'm pretty much stuck.
Can you help me out? And another thing, sorry for bringing this
old topic back. Haha.
Hi,
I have tried everything I've read so far and I still can't get the phone to boot into recovery.
I flashed the latest Stock ROM using Sony Ericsson 'Emma' flashtool.
Then I rooted using eroot and I have confirmed the root with the app Root Checker.
I installed ROM Manager but it says my device isn't recognised.
Also installed X-Parts and even though that said ClockWorkMod install was successful it still won't boot into recovery.
I have tried holding down various combination of keys whilst powering up but I don't even see a blue light appearing.
Is there any way to get CWM onto my Xperia Arc (LT15i) please?
Thanks for any advice
Flash a kernel that has CWM using fastboot.
僕のLT18iから送られてきた
popthosegaskets said:
Flash a kernel that has CWM using fastboot.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Hi popthosegaskets, thanks for replying. How would I go about finding the right kernal and how do I flash the phone if I can't get into recovery please?
I did flash my phone before with CM 9 but I've completely forgotten how to do it.
Thanks again
GoodGosh said:
Hi popthosegaskets, thanks for replying. How would I go about finding the right kernal and how do I flash the phone if I can't get into recovery please?
I did flash my phone before with CM 9 but I've completely forgotten how to do it.
Thanks again
Click to expand...
Click to collapse
The kernel will depend on your ROM, so if you're using stock ROM you can flash a stock kernel with CWM on it. LuPuS stock kernel and Advanced stock kernel are two examples of stock kernel that have CWM.
Most custom ROM kernel should have CWM installed. Custom ROM will also come with its kernel so flash that and you should have CWM on your phone.
僕のLT18iから送られてきた
popthosegaskets said:
The kernel will depend on your ROM, so if you're using stock ROM you can flash a stock kernel with CWM on it. LuPuS stock kernel and Advanced stock kernel are two examples of stock kernel that have CWM.
Most custom ROM kernel should have CWM installed. Custom ROM will also come with its kernel so flash that and you should have CWM on your phone.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Hi popthosegaskets, thanks very much for helping me. I was wondering if you could tell me where I'm going wrong trying to install a CM Rom please. I've tried both CM 9 and CM 10 but the former caused the boot screen to flicker and flash and when I tried to install CM 10 I just got an error in CMW saying error in sdcard/cm10.zip (status 7).
The problem stems from me experimenting and putting on the Jellybeanv4 Rom. I found that the Settings button didn't function and overal performance was slow so that is why I'm trying to flash back to a Stable CM Rom.
These are the instructions I followed using flashtool.
1. Download rom, patch and gapps from Downloads and put in SD card
2. Flash Xperia Arc S 4.1.B.1.13 Vodafone DE firmware via flashtool (For increasing system and data memory for Arc user and latest BB) Must
3. Flash included FXP kernel or any CM10 based kernel using fastboot
4. Boot into CWM
5. Wipe factory reset (Data & Cache)
6. Go mounts and storage
7. Format /system
8. Flash rom then patch and at last gapps
9. Reboot
10. After booting 1 time you can flash addons if you want
Is it a problem with a conflict with the Vodafone DE Firmware and CM Rom?
Thanks again for your help and advice
I have same problem...
Same rom and same instalation guide...
Any solution to get in CWM?
GoodGosh said:
Hi popthosegaskets, thanks very much for helping me. I was wondering if you could tell me where I'm going wrong trying to install a CM Rom please. I've tried both CM 9 and CM 10 but the former caused the boot screen to flicker and flash and when I tried to install CM 10 I just got an error in CMW saying error in sdcard/cm10.zip (status 7).
The problem stems from me experimenting and putting on the Jellybeanv4 Rom. I found that the Settings button didn't function and overal performance was slow so that is why I'm trying to flash back to a Stable CM Rom.
These are the instructions I followed using flashtool.
1. Download rom, patch and gapps from Downloads and put in SD card
2. Flash Xperia Arc S 4.1.B.1.13 Vodafone DE firmware via flashtool (For increasing system and data memory for Arc user and latest BB) Must
3. Flash included FXP kernel or any CM10 based kernel using fastboot
4. Boot into CWM
5. Wipe factory reset (Data & Cache)
6. Go mounts and storage
7. Format /system
8. Flash rom then patch and at last gapps
9. Reboot
10. After booting 1 time you can flash addons if you want
Is it a problem with a conflict with the Vodafone DE Firmware and CM Rom?
Thanks again for your help and advice
Click to expand...
Click to collapse
Sorry for very late reply, but it should not be a problem with DE firmware. Download the file again and try to install it following the steps.
iggy1974 said:
I have same problem...
Same rom and same instalation guide...
Any solution to get in CWM?
Click to expand...
Click to collapse
僕のLT18iから送られてきた
Solved boot in CWM
popthosegaskets said:
Sorry for very late reply, but it should not be a problem with DE firmware. Download the file again and try to install it following the steps.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
I've found solutions for LT18i
downloaded kernel
http://goo.im/devs/nAa/kernels/3.4.x/jb/anzu/3.4.45-nAa-03_LT18.img
Hi Everyone,
I wanted to install custom recovery in my Sony Xperia S L26ii , So rooted it a week ago. It is rooted for sure., I installed titanium backup and backed up everything. Yesterday I did unlock my bootloader so that I can install a custom recovery and custom rom. I followed the procedure of official way of unlocking bootloader by getting the key and unlocked it using fastboot command.
Till This everything works fine.I could boot into my device.
I flashed Twrp recovery adb fastboot. After this I wanted to backup my Stock rom. While I try to perform backup i got an error "unable to mount data" and it was unsucessfull.
I tried to reboot the system and shocked that it is stuck in boot loop now. I am seeing the word "Sony " and again it is rebooting,
I tried whatever I can by browsing internet. It seems I cannot use pc companion since I unlocked bootloader and installed custom recovery.
i tried to download tft file from somewhere and tried to flash through flashtools and got an error "ERROR - Processing of loader.sin finished with errors."
Dont know what to do. Any help would be highly appreciated. All I could access is TWRP recovery . currently I powered off the phone.
Please help me in the right direction.
Regards,
Suresh
ssuresh005 said:
Hi Everyone,
I wanted to install custom recovery in my Sony Xperia S L26ii , So rooted it a week ago. It is rooted for sure., I installed titanium backup and backed up everything. Yesterday I did unlock my bootloader so that I can install a custom recovery and custom rom. I followed the procedure of official way of unlocking bootloader by getting the key and unlocked it using fastboot command.
Till This everything works fine.I could boot into my device.
I flashed Twrp recovery adb fastboot. After this I wanted to backup my Stock rom. While I try to perform backup i got an error "unable to mount data" and it was unsucessfull.
I tried to reboot the system and shocked that it is stuck in boot loop now. I am seeing the word "Sony " and again it is rebooting,
I tried whatever I can by browsing internet. It seems I cannot use pc companion since I unlocked bootloader and installed custom recovery.
i tried to download tft file from somewhere and tried to flash through flashtools and got an error "ERROR - Processing of loader.sin finished with errors."
Dont know what to do. Any help would be highly appreciated. All I could access is TWRP recovery . currently I powered off the phone.
Please help me in the right direction.
Regards,
Suresh
Click to expand...
Click to collapse
It is the "ftf" file, not "tft". Try Flashing the stock ftf file immediately again after You get the error, it will work. You get the error first time.
Mirhawk said:
It is the "ftf" file, not "tft". Try Flashing the stock ftf file immediately again after You get the error, it will work. You get the error first time.
Click to expand...
Click to collapse
Thank you bro for replying and correcting me. Yes ftf file. I am downloading stock ftf from XDA forum (thanks for the member) and Will try to flash it (by pressing volume down and connecting usb cable to it) and will let you know.
Im just wondering , yesterday when I saw the phone in bootloop , I paniked and try to perform factory reset couple of times . Though it did not help in anyway. Will it disable usb debugging? If so is there any way we can reenable it from recovery or any other way?
-Suresh
ssuresh005 said:
Thank you bro for replying and correcting me. Yes ftf file. I am downloading stock ftf from XDA forum (thanks for the member) and Will try to flash it (by pressing volume down and connecting usb cable to it) and will let you know.
Im just wondering , yesterday when I saw the phone in bootloop , I paniked and try to perform factory reset couple of times . Though it did not help in anyway. Will it disable usb debugging? If so is there any way we can reenable it from recovery or any other way?
-Suresh
Click to expand...
Click to collapse
Nah it won't affect You while flashing the ftf file. You can always flash the ftf file using flashtool by fastboot, no matter what.
Mirhawk said:
Nah it won't affect You while flashing the ftf file. You can always flash the ftf file using flashtool by fastboot, no matter what.
Click to expand...
Click to collapse
Bro, You are great. That worked. It did revoked my root and locked bootloader though. But that is fine. I could do root and unlock the bootloader again..
A quick question. It all happened when I flashed TWRP recovery in this phone using this link (http://techglen.com/2014/02/12/install-twrp-custom-recovery-on-xperia-s-lt26i-nozomi/2/). I have already flashed TWRP in another HTC but it never caused this issue.
Is there any issue in installing TWRP in xperia sl ?
Should I use only CWM recovery?
If i can use Twrp , is there any good way/post or steps you recommend.?
Many Thanks again:good:
-Suresh
ssuresh005 said:
Bro, You are great. That worked. It did revoked my root and locked bootloader though. But that is fine. I could do root and unlock the bootloader again..
A quick question. It all happened when I flashed TWRP recovery in this phone using this link (http://techglen.com/2014/02/12/install-twrp-custom-recovery-on-xperia-s-lt26i-nozomi/2/). I have already flashed TWRP in another HTC but it never caused this issue.
Is there any issue in installing TWRP in xperia sl ?
Should I use only CWM recovery?
If i can use Twrp , is there any good way/post or steps you recommend.?
Many Thanks again:good:
-Suresh
Click to expand...
Click to collapse
Weird. It should not lock Your bootloader, since locking bootloader has different procedure. Anyways, TWRP works fine with Xperia SL. Even My phone is a SL and I always use twrp. Which version where You using of twrp? Use this version. And flash it using the command by connecting Your phone in fastboot mode:
Code:
fastboot flash boot openrecovery-twrp-2.8.0.1-LT26i.img
Mirhawk said:
Weird. It should not lock Your bootloader, since locking bootloader has different procedure. Anyways, TWRP works fine with Xperia SL. Even My phone is a SL and I always use twrp. Which version where You using of twrp? Use this version. And flash it using the command by connecting Your phone in fastboot mode:
Code:
fastboot flash boot openrecovery-twrp-2.8.0.1-LT26i.img
Click to expand...
Click to collapse
Bro. I flashed this recovery and now after reboot phone is going to recovery only. I manually tried to reboot it to bootloader and it is getting to TWRP recovery only. I tried to flash a Kitkat rom which was in my internal memory as zip file it failed with error " error executing updater binary in zip" did google search on it and got to know to overcome this error I had to be on TWRP 2.8.0.1 but we are already in that code, I dont know why I was still getting that error.
So I used the ftf file again to flash . I followed the forum "http://forum.xda-developers.com/showpost.php?p=28305266&postcount=3" to get the ftf file. I could see there are ftf for ginger bread and ICS , but I could only flash Ginger bread since I am getting error when I flash ICS ftf. not sure why.
Now having stock Ginger Bread rom rooted and bootloader unlocked.
I am happy that you brought me this far. It Would be great if you could guide me to proceed further to install any custom recovery and any custom rom of Jelly bean and higher. :good:
- Suresh
I also wanted to try something before you come online . so flashed the custom recovery which you have provided and flashed cyanogenmod 9 latest nightly and current status is
Rooted, bootloader unlocked, installed custom recovery(TWRP){with your wonderful assistance} , flashed cyanogenmod 9 nightly(ICS)
All I need now is a jelly bean rom or KITKAT rom (preferable )
ssuresh005 said:
All I need now is a jelly bean rom or KITKAT rom (preferable )
Click to expand...
Click to collapse
My Bad, that procedure installs a Kernel, and since it was not compatible with the ROM You were using, it only booted to the twrp. Copy the file to Your internal sdcard and use these following commands on Terminal Emulator app from playstore:
Code:
su
dd if=/sdcard/fotakernel.img of=/dev/block/mmcblk0p11
where fotakernel.img is the name of Your .img file.
It was weird that You go that error while flashing a Kitkat ROM. Which ROM were You trying to flash? If You wan to flash a Kitkat ROM, then follow the procedure here, no matter which Android version You are on, no need to do anything else.