Develop Bugs

Space Key not appear in Full Qwerty Keyboard

Hi all.
Suddenly, the "Space Key" does not appear in Full Qwerty Keyboard.
Now ".com" & "/" appear instead of "Space Key".
(plz see the attached file)
I want to change from ".com" & "/" to "Space Key",, how ever i don't know the way.
Could u give the solution?

i had exact same problem. apparently you have to do a registry change to fix it. HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
Your variable might not be 1 but when my screen was as yours it was a 2. Laater it switched on its own to a 9 so dont lose this registry change because your probably going to have to do it again. I noticed when i added new contact or something to that effect it changed the variable

Thank you very much for your solution!
My "CurrentET9Style" is 6.
After revise from 6 to 0, Back to normal keyboard.
Thank you !!!
mjcole2003 said:
i had exact same problem. apparently you have to do a registry change to fix it. HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
Your variable might not be 1 but when my screen was as yours it was a 2. Laater it switched on its own to a 9 so dont lose this registry change because your probably going to have to do it again. I noticed when i added new contact or something to that effect it changed the variable
Click to expand...
Click to collapse

Did you install the tweak cab from ppgeeks? if so, that is your issue. It was in the 1st post

thanks ,i think i get it.

supdawg said:
Did you install the tweak cab from ppgeeks? if so, that is your issue. It was in the 1st post
Click to expand...
Click to collapse
who's first post? I did install the tweak cab from ppcgeeks and would like to read that 1st post. If i uninstall the tweak will it fix the reacurring problem or do i have to hard reset? Thanks

when i changed to "autocomplete" I had the same problem with the space key being gone until i put the registry back the way it was...Tj

Keep CurrentET9Style = 0 ??
Changed HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
This works temporarily, but when I click on the time in a calendar entry, it switches to numbers, and does not switch back unless I re-edit the registry. Is there any way to keep the setting from changing at all? I want it to stay at CurrentET9Style = 0.
Anybody?

Hi everyone. Okay, first let me just say that the "FixStuckTP2Keyboard.cab" is fine and it does work. But it reverts your keyboard back to the "eT9" and you probably did a registry hack to change it from that in the first place (changed it to "COMP") am I right? Not to knock that cab, like I said it works just fine but I did NOT want to "install" a cab file everytime this happened (after it would change it back to "eT9" I would have to go back into the registry and change it to "COMP" again.)
Let me tell you HOW this is happening in the first place, it has something to do with Opera. You can test this very easily. First get your keyboard working properly, then open Opera. Type something in the address bar or just tap the address bar and BAM! Your keyboard is stuck in that mode. Now I don't know why this happens, that mode is getting stuck in memory for some strange reason and it will NOT let go.
I'm assuming this is ONLY happening to those of us who have used the registry (or a program or cab) to change the keyboard to "COMP" instead of "eT9" since changing it back to "eT9" solves the problem.
There are three solutions:
1.) ONLY use the slide-out keyboard when using Opera.
2.) Use the FixStuckTP2Keyboard.cab
3.) Use the MortScripts I created.
Use "KB-OFF (eT9).mscr" to force the "eT9" info into the registry. Then use "KB-ON (COMP).mscr" to enter the "COMP" info back into the registry, then do a soft reset.
You can rename these files if you like.
Yeah I know it sucks to have to do a reset just to get the use of your spacebar back just because you used the virtual keyboard when using Opera but hey, what are you gonna do?
UPDATE: Just noticed that "sometimes" my scripts don't work if you click on them one after another (again for some strange reason). If this happens to you just click on "KB-OFF" soft reboot then click on KB-ON" & reboot. Weird I know.

Chrome ERR_NETWORK_CHANGED error help!

I get this stupid error where it won't load a webpage until I hit refresh a couple times. Just started happening

WiFi, mobile data or both?
Does it only happen in the browser, or in other apps requiring data as well?
Which browser are you using?
Have you tried another browser?
Does it only happen with one, or certain websites? Or all websites?
3 out of 10 for bug reporting skills
This is the themes and apps section, not the Help and Troubleshooting section.
0 out of 10 for correct forum posting

So, here are the some guide to fix and solve this error ERR_NETWORK_CHANGED code problem.
How to fix Error ERR_NETWORK_CHANGED Code problem:-
1. Reinstall Network Adapter –
Go to the start menu
Search or go to the ‘RUN.’
Click on it and opens it
After that, Type this below the following command there
” hdwwiz.cpl “
Press Ok there
Expand network adapters, locate your network adapter name
Note down the name,
Right click on that adapter
Choose and click on the Uninstall option there
Reboot or restart your PC once
After restarting, reconnect to your network & test
If it isn’t installed, then download it from manufacturer website
After that, run it and reinstall it
After that, test it
After completing, close the tab
That’s it, done
2. Change the LAN settings –
o to the Google Chrome menu
Click on the Settings tab there
Click on the ‘Show Advanced Settings’ option there
Click on the “Change Proxy Settings” tab there
Now, go to the “LAN settings” and deselect the
” Use a Proxy server for your LAN “
After deselecting, close the tab there
That’s it, done
3. Flu..... Check out more at; Techinpost.com/fixed-error-err_network_changed-code-problem

I am having this weird error called Err cache Miss whenever I am trying to browse through google chrome. I have uninstalled it and reinstalled it again but it didn't work. There is no issues with the internet as my Firefox browser is working fine.

Multi user feature on HTC 10

Hi,
I am trying to get multi user feature to work on my HTC 10 because this is not enabled on the version I have (pre-ordered, UK, no carrier).
I rooted the device following this post. Everything went ok.
Using BuildProp Editor I added on my build.prop the following lines:
Code:
fw.max_users=3
fw.show_multiuserui=1
After rebooting I see the option Users on Settings. I go ahead and add new user, it prompts "set up user now?". If I say yes, it switches to a new lock screen. However, when I try to unlock the screen, it says "Unfortunatly, Setup has stopped." with an OK button that when pressed just gives me the same message. No other function is available other then give OK, volume keys and power button. To get out of the message loop I need to reboot phone. After reboot, I see the new user that I tried to create on the list of user but If I try to enter I get the same Setup error.
Has anyone tried this?
I know that similar thing can be done via a Xposed module. But I would like to have this sorted without having to go there for now.
Running rooted 'stock' Android 6.0.1 (1.30.401.1) on HTC 10.
Cheers
--------------------
SOLUTION:
1 ) I edited the build.prop and removed the lines I added to get back to original.
2) I installed Xposed and a module XposedMultiUsersModule. This gave-me again the the Users option on the Settings. But trying to add new user gives the same error on Setup as before.
3) I edited the build.prop. Change the line ro.setupwizard.mode=OPTIONAL to ro.setupwizard.mode=DISABLED.
Then you can add new user and everything will be ok. You just need to add your google account and setting a few things up manually as necessary for your use. I do believe that I could have done the step 3 without steps 1 and 2. But I just don't want to test that now.
So far, no issues with internet connectivity. I'm happy.
Hope it helps!

UPDATE: If one tries Guest instead of creating a New User, you can use it. It even allows you to keep yours application settings and data after reboot. However, I am having lots of problems regarding losing internet connectivity on the the Guest account when I switch back to Owner profile. That is a problem because I would like to have app running on the Guest account that need to be online.
If there was a way to clone another account or bypass the android Setup application I think I could manage to get what I want.
SOLUTION:
1 ) I edited the build.prop and removed the lines I added to get back to original.
2) I installed Xposed and a module XposedMultiUsersModule. This gave-me again the the Users option on the Settings. But trying to add new user gives the same error on Setup as before.
3) I edited the build.prop. Change the line ro.setupwizard.mode=OPTIONAL to ro.setupwizard.mode=DISABLED.
Then you can add new user and everything will be ok. You just need to add your google account and setting a few things up manually as necessary for your use. I do believe that I could have done the step 3 without steps 1 and 2. But I just don't want to test that now.
So far, no issues with internet connectivity. I'm happy.
Hope it helps!

Hi,
thanks for the updates. do you think it would work by just editing the build.prop file with the line modifications ?
add :
fw.max_users=3
fw.show_multiuserui=1
change :
ro.setupwizard.mode=OPTIONAL
to
ro.setupwizard.mode=DISABLED
Thanks !

nuts77 said:
Hi,
thanks for the updates. do you think it would work by just editing the build.prop file with the line modifications ?
add :
fw.max_users=3
fw.show_multiuserui=1
change :
ro.setupwizard.mode=OPTIONAL
to
ro.setupwizard.mode=DISABLED
Thanks !
Click to expand...
Click to collapse
It Works ...

i am able to create a new user with changing the above mentioned settings, but dont know how to change between the two users not even able to change to guest and back to original account, i can however see the guest account in the user list please guys help me i am stuck with my new user account which i setup after making these changes unable to go back or switch back to original account

Hosts not working with Open Beta 33

Hello, everyone.
After upgrading to the latest open beta (33, for oneplus 3) no matter what, I cannot manage hosts file to work (for ad blocking purpose). I tried any possible configuration I've found on the forums.. I'm using Magisk and I've tried with adaway, and with the unified hosts module (with the GUI and with the command in terminal). Tried with and without system less mode option... Nothing works. I've also tried by adding a one line hosts file with 0.0.0.0 facebook.com, it still loads.
I've noticed I have 2 hosts file: one in /etc and one in /data but none is working. What am I missing? Any extra suggestion would be helpful.
Thank you!

Check if your operator have a proxy activated by default in systen Settings-SIM-APN and if you find it delete the proxy address and restart

Hello,
Thanks for your reply. I had no proxy set, and the issue is also present when connected to my home/work wifi connection
Thanks

Mobile Data Not Working (not completely)

Hello, I have a rather strange problem with my phone.
After the Update which has just been released (MIUI Global 10.3.1.0 (ODEMIXM)
he began to behave in a strange way my mobile internet.
For example: Youtube, Facebook, Messenger, Google Maps work normally.
And all other applications no longer (even an application to Check system update)
I'm popping up a message: No connection.
I did different things: Reset Internet settings,
change network settings in options (* # * # 4636 # * # *)
and even a hard reset.
if you have questions Yes on Wi-Fi works normally.
Greetings!

Try factory reset first.

mine has similar problems after a call. Some Internet stuff still works, most don't, unless I disable and re-enable mobile internet from the dropdown menu. Did you find a solution, MrKaim?

Same problem in my phone too. The only app which is remain usable of the internet is the Chrome browser. Messeaging apps, navigation, ebay, etc... is always lost somehow the connection: even when I using the app: for example I browsing in the ebay app and after 10mins,its says sonetging got wrong and I can go on only when I turn wifi/adata off and on. And yes, ön my mi mix 2, the problem is still exist on wifi and mobil net too.

Mi Mix 2 Havoc OS 3.7 Mobile Internet
I am facing a similar issue.
Has anyone found a solution for this ?
I'm running a ROM : Havoc OS 3.7 Android 10
Also tried ROM : AICP and Lineage.. Same Issue!
I keep shuffling LTE / 3G it connects sometime but the connection is unstable.
Permanently displays an X in the mobile signal as if there is no mobile data connection.
Please share a solution if anyone has found one.

I realize only some data isn't working but you could save your apns-conf.xml from another setup where you have no data issues and everything works perfect (I always keep one handy) and delete your current apns-conf.xml in /system/etc and system/product/etc and paste the good one in your /system/etc and set permissions on new apns-conf.xml to 0644 using root explorer or whatever root file manager you use then go to settings on your device/networks and internet/mobile network/access point names/ and top right hit the three dot menu select reset to default and wait till you see LTE show in status bar and reboot. If it's an apn issue that will solve it.
My Mix 2 isn't hooked up anymore to a service but I do use it on wifi at home but the apns-conf.xml on stock rom/miui may be slightly different than they are on an AOSP custom rom. I know that's been the case for me on every device I've done this on so be sure if you do give this a shot that you use your miui apns-conf.xml on miui roms and AOSP apn xml on AOSP custom roms so that it will work.
I've been using this process when I have had any data issues at all on my last 3 devices and it's worked 100% every single time when after installing a custom rom I've had no data this works to get LTE going. Credit to spaceminer for this info on the apn delete and swap, data fix as he's who I first learned this from on another forum.