Develop Bugs

Internet now working on Sprint Touch w/new ROM

I hope starting a new thread is the way to go on this...
I just updated to the new Sprint Official WM 6.1 ROM, and immediately could not connect to the internet.
I tried running the IOTA automatic data provisioning update (Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start) and it failed repeatedly with a 1012 error. As was posted by others, I noticed that there was a "CurrentUserName" setting in Start->Settings->System->Device Information that had [email protected] where I would have expected to see [email protected] instead. (that would have been my Sprint provided email address) The first thing I tried was to go to the phone dialpad and dial ##3282# to start the EPST program and check my data provisioning settings (this requires that you know your MSL - Master Service Lock Code - if you are going to edit). UserName was blank there, so I tapped the blank setting and held down until an "EDIT" menu popped up. I tapped "EDIT" and changed it to the previously correct [email protected] value. After saving changes and another reboot, I still could not connect to the internet, run IOTA, and the "CurrentUserName" was still wrong. After searching through various settings looking for a way to change the currentusername, I installed PHM Registry Editor and searched again.
In HKEY_LOCAL_MACHINE/Software/OEM/DIM there is a key "EnableCurrentUserName" and it was set to 1. I edited that and set it to 0, exited the Registry Editor, and restarted the device by holding the power button until it warned me about shutting down. I tapped "Yes" and it shut down and restarted. The "CurrentUserName" setting no longer appeared in the Device Information page. At this point I was able to run IOTA successfully and imediately after that I could use the internet and other data services.
I hope this helps someone. Sorry to be so long winded, but I was trying to answer as many "How? Where?" questions as I could as I went.
Briefly:
1. Using WM Registry Editor software, change HKLM/Software/OEM/DIM/"EnableCurrentUserName" from 1 to 0 then save changes and exit editor.
2. Dial ##3282# and edit UserName to correct [email protected] address. Device will reboot when you exit and save changes.
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Thanks to all the others here who have helped me along the way,
Scruffy

anyone else know if this works?
i just flashed the new sprint rom and now the data connection does not work.. no internet.. ? I was just wondering if anyone else had this problem and does this fix it?

After some more time with this ROM installed I have found that it is not neccessary to change the ##DATA# (##3282#) user name settings. Just change the HKEY_LOCAL_MACHINE/Software/OEM/DIM/EnableCurrentUserName value to zero, save changes and then you can run the IOTA update successfully (or at least I can).
I have found that I need to do this every time I do a hard reset of my device. I hope this helps someone else.
Scruffy

this did not work for me.. I Get error code 67
i started a new thread here........ http://forum.xda-developers.com/showthread.php?t=415666
so maybe someone will chime in... the ##3282# does not work for me at all.. you hit that on the dial pad and nothing happens... so i can not access that menu...
For now i went back to a OEM rom and called sprint and they got me working by doing a MASTER RESET... also ##3282# works on OEM roms but i think the file EPST.EXE is missing from the CUSTOM roms... any input would be great..

Not working for me.
i'm sure a master reset from within #778 or whatever would work but i don't feel like
putting in the data again.

Scruffy said:
I hope starting a new thread is the way to go on this...
I just updated to the new Sprint Official WM 6.1 ROM, and immediately could not connect to the internet.
I tried running the IOTA automatic data provisioning update (Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start) and it failed repeatedly with a 1012 error. As was posted by others, I noticed that there was a "CurrentUserName" setting in Start->Settings->System->Device Information that had [email protected] where I would have expected to see [email protected] instead. (that would have been my Sprint provided email address) The first thing I tried was to go to the phone dialpad and dial ##3282# to start the EPST program and check my data provisioning settings (this requires that you know your MSL - Master Service Lock Code - if you are going to edit). UserName was blank there, so I tapped the blank setting and held down until an "EDIT" menu popped up. I tapped "EDIT" and changed it to the previously correct [email protected] value. After saving changes and another reboot, I still could not connect to the internet, run IOTA, and the "CurrentUserName" was still wrong. After searching through various settings looking for a way to change the currentusername, I installed PHM Registry Editor and searched again.
In HKEY_LOCAL_MACHINE/Software/OEM/DIM there is a key "EnableCurrentUserName" and it was set to 1. I edited that and set it to 0, exited the Registry Editor, and restarted the device by holding the power button until it warned me about shutting down. I tapped "Yes" and it shut down and restarted. The "CurrentUserName" setting no longer appeared in the Device Information page. At this point I was able to run IOTA successfully and imediately after that I could use the internet and other data services.
I hope this helps someone. Sorry to be so long winded, but I was trying to answer as many "How? Where?" questions as I could as I went.
Briefly:
1. Using WM Registry Editor software, change HKLM/Software/OEM/DIM/"EnableCurrentUserName" from 1 to 0 then save changes and exit editor.
2. Dial ##3282# and edit UserName to correct [email protected] address. Device will reboot when you exit and save changes.
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Thanks to all the others here who have helped me along the way,
Scruffy
Click to expand...
Click to collapse
how do i find [email protected] where would that be?

Scruffy said:
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Click to expand...
Click to collapse
I just upgraded to NFSFAN's latest ROM, everything went well but I can not get my internet to work. The one thing I did notice is under the services tab, internet is not an option. I loaded the dcd sprint carrier 20090714 cab am I missing something else?
Thank you for any help you can provide.

Update:
Well I went back and flashed to the HTC 6.1 rom, then back to the 6.5 rom. That fixed my internet issues, but that option is still missing for me. Then after all of that my MSID was really screwed up. Everything seems to be good now.

please please help me clear the instructions
i have a horribly vague idea of what i need to do, to get the internet working again.
i already got the IOTA_1120 zip file in my cell but when i even try to open it up it says that there is no application that is related to to it, so i must start this application and open up the file from within. How do i do this? am I even doing what im supposed to??
Where exactly is HKEY_LOCAL_MACHINE/Software/OEM/DIM and how do i get there???
if you could please instruct me with simple stieps i would greatly appreciate it, simple being like start>program files> etc.
please help i am one step away from smashing this damm cell into the wall

electricfeel_2012 said:
i have a horribly vague idea of what i need to do, to get the internet working again.
i already got the IOTA_1120 zip file in my cell but when i even try to open it up it says that there is no application that is related to to it, so i must start this application and open up the file from within. How do i do this? am I even doing what im supposed to??
Where exactly is HKEY_LOCAL_MACHINE/Software/OEM/DIM and how do i get there???
if you could please instruct me with simple stieps i would greatly appreciate it, simple being like start>program files> etc.
please help i am one step away from smashing this damm cell into the wall
Click to expand...
Click to collapse
The path of HKEY.... is actually on the registry. You need to use a registry editor (like PHM Regedit) to make the necessary changes to the registry. I would recommend you to re-read those instructions as they will not get any easier than that. Alternatively, if you are on Sprint's official rom and have absolutely no clue what you are doing, you can always call them and ask them for help.
As far as the IOTA zip file, if you cannot open it, that means that you do not have any program to extract from compressed files in your device. Your best bet is to transfer the file to the desktop and extract it there. Once you are done, place the extracted contents back in the device and run it in there.

[Guide]How to remove security lock when using VPN

Good Morning
I make this guide because i dint find any similar thread here..
When you set up a vpn connection Android system force you to create a pin or pattern security lock for lockscreen.This is for security reasons in case you lost your phone.But many users want to use VPN without security lock.
In this guide I will describe how to remove security lock when using VPN.
This guide will work on any GN2 Rom and also in all other android phones
What you will need:
1)Rooted Phone
2)Root explorer or any other file editor
3)Sqlite Editor or Sqlite Manager
Before you proceed make sure you make a nandroid backup.Im not responsible for any damage.
Steps:
1)First of all configure your VPN Connection
2)Open your file Explorer and browse /data/system/locksettings.db
3)Open it with sqlite editor and choose locksettings
4)Choose lockscreen.password.type and press "Edit record" button.
5)Change 131072 value to 0 (131072 may differ from security type)
The result must be this:
6)Thats it
It must be applied without reboot
PS:If you want to restore it do the same steps and make "0" value to "131072"

How about doing the same in non-rooted phones?

Thanks for the guide
I was looking for a solution to the lockscreen security the other day while setting up a VPN to my home PC
Another alternative for rooted users not wanting to edit the sqlite db is to use something like the VPN Root app
https://play.google.com/store/apps/details?id=com.did.vpnroot

Imranhakro said:
How about doing the same in non-rooted phones?
Click to expand...
Click to collapse
As far as I know, you cannot modify these secure, locked down settings on a phone that isn't rooted.

Works like a charm! Good guide. Now I can set up my work/home VPN without any enforced screen lock :good:

The same issue - how to remove forced lock screen on Galaxy S5?
It's extremely annoying and stupid I need to use PIN instead fingerprint sensor which is the Galaxy s5's main feature when I have my VPN set up. Please somebody tell us how to get rid of forced lock on GS5. Thank you!

Can't get this to work in Kitkat. SQLite Database Editor can't open locksettings.db. Any ideas?
Edit: Disregard. I think I am using the wrong program. Have to download SQLite Editor not SQLite Database.
---------- Post added at 10:17 AM ---------- Previous post was at 09:56 AM ----------
Thanks!
Worked great.

the method works, but after I reboot, when I enter VPN screen is aks me for "password for credential storage"... how can I solve? thanks in advance

Thanks for the guide

Not work on kitkat, value is 0 but security lock is...
Tapnięte z mojego S Advance ☺

In 4.4 there is no such file
Code:
/data/system/locksettings.db
.. any ideas?

In 5.0.2 the file is there but is empty.

LOLLIPOP losing WIFI passwords (SOLVED)

After a lot of reading I decided to make this thread as an easy reference to an otherwise scattered/multi answered question across all android devices.
1.
a. (OPTIONAL) Backup your device to an alternative gmail account or service.
b. Go to Settings/General/Backup and Reset. UNCHECK Back up data to Google servers
c. Go to Google Dashboard and delete all backups under your Android device.
d. RESTART phone and then put your password in for the last time. CHECK/Enable Back up data to Google servers in phone settings.
2.
a. Open your file manager and look in build prop for this line: ro.securestorage.support=true and EDIT to show false
d. RESTART phone and then put your password in for the last time.
3.
a. With your file manager go to #root/data/misc/wifi/wpa_supplicant.conf and delete any duplicate SSID's along with their settings.
b. RESTART phone and then put your password in for the last time.
THESE ARE ALL SEPARATE SOLUTIONS AND SHOULD BE TRIED INDIVIDUALLY SO THAT WE CAN UNDERSTAND WHAT WORKED FOR YOU. PLEASE POST YOUR RESULTS ALONG WITH ANY OTHER SOLUTIONS YOU HAVE FOUND SUCCESS WITH.

User profiles on Galaxy S9?

Would anyone know if the Galaxy S9 natively supports user profiles so that multiple users can login and use the same phone with their unique settings and apps? If not would anyone be able to recommend an application that could accomplish this?

The functionality has been disabled for stock Samsung ROMs long time ago (if it was ever enabled). There were some discusions in the past regarding this and what I remember is that you need root for this to work. You have to edit build.prop and include the lines:
fw.show_multiuserui=1
fw.max_users=n (where "n" is a number indicating the max users on device - should be at least 2)
Alternative is to flash an AOSP based ROM that has the function enabled.

Rapier said:
The functionality has been disabled for stock Samsung ROMs long time ago (if it was ever enabled). There were some discusions in the past regarding this and what I remember is that you need root for this to work. You have to edit build.prop and include the lines:
fw.show_multiuserui=1
fw.max_users=n (where "n" is a number indicating the max users on device - should be at least 2)
Alternative is to flash an AOSP based ROM that has the function enabled.
Click to expand...
Click to collapse
I unfortunately cannot root the device as it will be provisioned for company use :/ is there a launcher that could help to accomplish this?

Sorry, none I know. The functionality is deep embeded in the OS, a launcher would not be enough to accomplish that
You could however use dual accounts for certain apps or mail and also use Secure Folder to lock out personal/private data. This way you will have some sort of multi user since the secure folder keeps data in separate encrypted form
Sent from nowhere over the air...

Unlock car multimedia system

I'm trying to find information about a multimedia system i have installed in my Skoda, the sticker on the device says CNT100, which is manufactured by CarNeTek (device page - https://www.carnetek.com.tw/products_detail/15.htm, not sure if they are the manufactures or just a reseller).
The company which sell and install it locally are not willing to share any information about the device, and of course are not willing to unlock it (to install applications from the play store, tweak configuration, etc.).
On the device there are 6 dip switches (which i couldn't figure out what they control), and no visible button (to get into recovery), i can get to the play store, and install applications - but as soon the installation is completed - they get uninstalled (there is a list of application that are not automatically uninstalled).
The launcher looks like a custom local version, there is no way to get into the settings page and the notification bar cannot be clicked (or dragged down), if i click multiple times on the menu - i get a dialog for some configuration, where i'm prompt for password (the dialog has a random number on it - which i suspect is used to generate correct password).
is anyone familiar with this device? or can suggest a way to unlock it?
(attached images of the device and the boot screen)

Hey mrtowel!
Trying to figure out that as well.
You said "if i click multiple times on the menu"
Where is this menu? possible to send a photo of that?

I'm talking about an Israeli version
Seems to be customized by [email protected]
sorry but i was wrong describing the way to get to the password dialog, on the home screen - there is a weather widget, showing the weather on the left side and the clock on the right side, multiple taps on the weather allows you to reboot the device, while multiple taps on the clock gets you to the password dialog.
I made some progress with the device - still working on getting it unlocked completely, let me know if you want more details.

mrtowel said:
Seems to be customized by [email protected]
sorry but i was wrong describing the way to get to the password dialog, on the home screen - there is a weather widget, showing the weather on the left side and the clock on the right side, multiple taps on the weather allows you to reboot the device, while multiple taps on the clock gets you to the password dialog.
I made some progress with the device - still working on getting it unlocked completely, let me know if you want more details.
Click to expand...
Click to collapse
Hey!
Just found that new to me. Pushed 6 times on the clock of the weather widget and got a prompt for the password. I receive a 9 digit number with that.
Also found that if you do the same on the temperature indication, you'll be prompt for device restart.
So that's a progress.
Anyways, I will be happy to hear from you, what progress you have made on this.
Will send you a PM.

Did someone have any success?

Hello, i have a Toyota corolla 2016 with "android multimedia" that have only 2 apps without google play or any apps, the startup screen is like yours.
i wan to unlock the system, someone know how to do that?

gtrs36 said:
Hello, i have a Toyota corolla 2016 with "android multimedia" that have only 2 apps without google play or any apps, the startup screen is like yours.
i wan to unlock the system, someone know how to do that?
Click to expand...
Click to collapse
try to get to app store (in case it is installed) through one of the installed apps using the 'rate us' option, you can also try and push a play store link through bluetooth, if it works - the android system will launch the play store app, and you'll be able to setup your account.
Once you get to the play store - download and install Googel app (https://play.google.com/store/apps/details?id=com.google.android.googlequicksearchbox&hl=en) this will let you ask google assistant to 'Open Display Settings' (in my case this option let me enable the drag down menu, where i could easily access the settings and other stuff).
hope that helps

?
Hey did you succeed?

please help
Hi
did any one of you had any success with getting into setting menu ?
i can get to google play...but as was posted before, everything i try to install immediately erase itself.....
does any one have the approved app list from ituran ?
i do believe that together we can crack this....
thanks

Thanks for the tips I've made it to download youtube! But how I can bypass the limit to install all apps from play store?
Also how can I cancel the restrictions of using apps during drive?
Thanks
Allon

Hey @mrtowel any change you can share some more details?
I tried connecting to the USB with my laptop to try doing some adb commands but it did not detect anything
I'm also wondering about the dip switch
and how to get the password bypass
Would really like to hear some more details if you can share please?

Just came here to see if can recall my steps from last time i played with the device (i kind of gave up, as it worked well with what there is, but recent update made it work really slow).
turns out there is a post on facebook (https://facebook.com/groups/gilcar/permalink/729881061134680/?comment_id=729883497801103), i'm going to try and build some utility to generate unlock codes (last time, i managed to get to an adb terminal, but i wasn't aware of the `pm hide` option to disable the installation blocker ****).
will post updates here if i get some progress

For anyone interested, attached the list of whitelisted apps. a jar to generate the code to enable tech mode and how i disabled the installation blocker
For the jar - you would need to get your device Wifi MAC address (see old post from 2019 on how to enable the navigation bar), which can be retrieved from the 'אודות' section. (run the jar by running 'java -jar codeGen_jar.jar 00:11:22:33:44:55' - replace the numbers with your device mac address)
Wifi must be enabled - before the next step
To get to the code, hit few clicks on the clock widget in the home screen would prompt you with a password (if the code generator matches your version of connect-it (if it isn't - see bypass admin mode workaround below), the codes would match), enter the unlock code (admin mode result from the codeGen output) and move to the apps section - you would see 'tech mode' application.
Wifi must be connected before the next step
On the tech mode application - you would have another code (tech mode result from the codeGen) enter it - and it would open a page to enable adb remote server (you must be connected to a wifi network to get it to work).
Connect to the adb using a remote shell from another device (or a laptop), to the specified IP on port 1917 (note that most mobile tethering options won't work due to networking limitations). If you don't have an accessible wifi network - see Wifi Workaround below
From adb, run the following:
to disable the application which blocks installations: pm hide com.ituran.installationblocker
Disable updates: pm hide com.ituran.systemupdateservice
Disable blocking applications while driving: pm hide com.ituran.driveusagemonitor
Tips:
While in admin mode, you can see all installed applications, and pin them to the start page of the home screen, recommend to pin Play Store app (as it is usually hidden)
Don't try to enable or enter 'Guest mode' (i tried it, and the device went into boot loop)
The codes generated are date sensitive, so either generate new ones if you won't use them in the same day, or change the device date.
Wifi Workaround : a workaround can be to install modified version of 'Remote ADB Shell' (attached) on the device, save it to your mobile phone, and push it to the device through bluetooth, this version is the same version as 'Remote ADB Shell' from the play store - only names 'Spotify' which will keep it installed on the device, after installation, run it and connect to 127.0.0.1 on port 1917 instead.
Bypass admin mode workaround : while Admin Mode enables you to view the hidden applications, in the above process, it mainly gives you the option to run the tech mode app. if the code for the admin mode isn't working for you, install 'Amaze file explorer' (attached - it was renamed to bypass the installation blocker) by pushing it through bluetooth.
You can find more details on this facebook post (not mine - but i used details from this thread to figure out how to disable the application from ADB)
Enjoy and drive safely.

mrtowel said:
For anyone interested, attached the list of whitelisted apps. a jar to generate the code to enable tech mode and how i disabled the installation blocker
For the jar - you would need to get your device Wifi MAC address (see old post from 2019 on how to enable the navigation bar), which can be retrieved from the 'אודות' section. (run the jar by running 'java -jar codeGen_jar.jar 00:11:22:33:44:55' - replace the numbers with your device mac address)
Wifi must be enabled - before the next step
To get to the code, hit few clicks on the clock widget in the home screen would prompt you with a password (if the code generator matches your version of connect-it (if it isn't - see bypass admin mode workaround below), the codes would match), enter the unlock code (admin mode result from the codeGen output) and move to the apps section - you would see 'tech mode' application.
Wifi must be connected before the next step
On the tech mode application - you would have another code (tech mode result from the codeGen) enter it - and it would open a page to enable adb remote server (you must be connected to a wifi network to get it to work).
Connect to the adb using a remote shell from another device (or a laptop), to the specified IP on port 1917 (note that most mobile tethering options won't work due to networking limitations). If you don't have an accessible wifi network - see Wifi Workaround below
From adb, run the following:
to disable the application which blocks installations: pm hide com.ituran.installationblocker
Disable updates: pm hide com.ituran.systemupdateservice
Disable blocking applications while driving: pm hide com.ituran.driveusagemonitor
Tips:
While in admin mode, you can see all installed applications, and pin them to the start page of the home screen, recommend to pin Play Store app (as it is usually hidden)
Don't try to enable or enter 'Guest mode' (i tried it, and the device went into boot loop)
The codes generated are date sensitive, so either generate new ones if you won't use them in the same day, or change the device date.
Wifi Workaround : a workaround can be to install modified version of 'Remote ADB Shell' (attached) on the device, save it to your mobile phone, and push it to the device through bluetooth, this version is the same version as 'Remote ADB Shell' from the play store - only names 'Spotify' which will keep it installed on the device, after installation, run it and connect to 127.0.0.1 on port 1917 instead.
Bypass admin mode workaround : while Admin Mode enables you to view the hidden applications, in the above process, it mainly gives you the option to run the tech mode app. if the code for the admin mode isn't working for you, install 'Amaze file explorer' (attached - it was renamed to bypass the installation blocker) by pushing it through bluetooth.
You can find more details on this facebook post (not mine - but i used details from this thread to figure out how to disable the application from ADB)
Enjoy and drive safely.
Click to expand...
Click to collapse
Does this method work with Hyundai, Mitsubishi, etc...?

Hi Mr.
mrtowel​do you have any videos explain the steps in post #13 I will be thankful if you provide me with for urgent case.
thank you dear for great job