Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Try this method
If it helps you then thank me
First off everything remove the SIM card and let the phone rest for five minutes and put the SIM and
Press the power button and volume up button at the same time for little long time your phone wil start as normal
Some times **** happens bro
Sent from my LT26i using xda app-developers app
Dont work for me
lukasz8504 said:
Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Click to expand...
Click to collapse
Connect in flashtool, relock bootloader. Use seus to install fresh fw.
lukasz8504 said:
Dont work for me
Click to expand...
Click to collapse
Ok i find this tread http://forum.xda-developers.com/showthread.php?t=1527159 but when i try to enter flashmode i see this message device conected with usb debugging off for 2011 devices line be sure you are not in mtp mode
Try to use a different charger. I got the same bug with a sola . It worked with a samsung wallcharger. The sola was not loading with the sony charger when i turned it of. Other's reported this bug when phone turns off because of empty battery.
I try charger from se x10, xperia s, iphone 3gs and zte blade and nothing change still red led and after few minute red turn off and then pc see phone but in flashtool only this message device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode
lukasz8504 said:
I try charger from se x10, xperia s, iphone 3gs and zte blade and nothing change still red led and after few minute red turn off and then pc see phone but in flashtool only this message device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode
Click to expand...
Click to collapse
I think your phone hard bricked !
In this situation if you couldn't reset your phone by holding power+volume up till it 3 times vibrate , try power+volume down when you connected to pc sometimes it reset your phone.
try power+volume up when you plugged in wall charger till 3 times vibrate ( in some situations it happens after 30 second you hold both.
If none on this reset your phone , its only way that you send it to repare service of sony to re write your bootloader by JTAG box. I had the same problem when I install an improper kernel and I search all of net and try all thing I found but after 2 week I can't solve the problem and only way to back your phone to work is, re writing your bootloader by JTAG box
Anybody can help? maybe trim area problem??
that happened to me once. I removed the battery, connected the wall charger, and then put the battery back. It was the last thing I tried and it worked.
(Yes, I had to open the phone, so I don't have warranty)
waiflih said:
that happened to me once. I removed the battery, connected the wall charger, and then put the battery back. It was the last thing I tried and it worked.
(Yes, I had to open the phone, so I don't have warranty)
Click to expand...
Click to collapse
I try this and red led blink now
Can you now plug in to pc holding volume down to get flash mode though?
Sent from my LT26i using Tapatalk 2
When i connect to pc with volume down in flashtool see for devices 2011... mtp mode, device manager show semc flash device and somthing new sony ericsson seehcri control device
Does the led stop going red then?
Sent from my LT26i using Tapatalk 2
Yes when connect to pc red led turn off, flashtool see phono but not in flashmode
Did you repaired it bro
No my phone is in second service and i must wait. I find possible solution but cant try it. http://forum.xda-developers.com/showthread.php?t=1910029
Are you sure you're connecting.phone to PC in flashmode? (holding down the volume button while plugging in the phone)
Good luck there then
lukasz8504 said:
Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Click to expand...
Click to collapse
I had this pr0blem but s0lved it ..!!"
Jxt remove y0ur sim card wait f0r 10 sec0ndz Then v0lume up + P0wer f0r 5 sec0ndz and the ph0ne will vibrate 3 times after that release butt0nz n p0wer 0n the device d0nt plug in the charger then it will turn 0n and say shutting d0wn and after when it shut down plug it ........ Pr0b s0lved
I installed wrong kernel http://forum.xda-developers.com/showthread.php?t=2305591 and device wont turn on,it just vibrate and thats all,no lights,nothing.Help
Can you get into flashmode?
Also, questions go to Q&A.
To check:
Phone is off.
>Hold Back button then plug usbcable to phone. Led green > Flashmode.
>Hold Menu button then plug usbcable to phone. Led blue > ADBmode.
My advice: if you dont sure what kernel is it, flash stock rom first, using Flashtool + stock *.ftf file.
n3mvn said:
To check:
Phone is off.
>Hold Back button then plug usbcable to phone. Led green > Flashmode.
>Hold Menu button then plug usbcable to phone. Led blue > ADBmode.
My advice: if you dont sure what kernel is it, flash stock rom first, using Flashtool + stock *.ftf file.
Click to expand...
Click to collapse
only red light showing ,when i plug it to computer it shows Usb device not recognized.
Write more details about what you did, step by step.
I have never faced this error before
I found this thread may be same problem as you http://forum.xda-developers.com/showthread.php?t=1264816&page=4
P/s: I found this thread to save Hardbrick Xperia phone. Wow. http://forum.xda-developers.com/showthread.php?t=1322827
Give it a shot if you cant solve your problem.
Hope it help.
Okey.i used flashtools to flash the kernel,after that phone wont started ,it just vibrate,after 2-3days its only showing red light.
Sorry for my bad english.
EDIT:I tryed to charged ,but nothing it shows red light 3 times
rearix said:
Okey.i used flashtools to flash the kernel,after that phone wont started ,it just vibrate,after 2-3days its only showing red light.
Sorry for my bad english.
EDIT:I tryed to charged ,but nothing it shows red light 3 times
Click to expand...
Click to collapse
I have the same problem
finally??
hi ppl
usb not recognize, not even the "unknow device" just like nothing conected. only logo "sonyericson" show. if use hot keys to flash mode or fastboot mode, the phone stay stuck in a blackscreen and a green light or blue light in the power button, depending what condition u start.
used flashtools, and pc companion tryin to fix, but not work if no usb is detected.
Hi!
Yesterday I want to install new ROM, but while I was doing it my mobile turned off and didn't want to wake up. Totally no respone, no LED when plug in to charger, no reaction on any buttons. I made a recovery but I can't restore it, because I can't power on my phone. I tried to flash new clear, stock ROM, but when i plug in XS to PC, when flashtool ask for it i got this log:
Code:
05/048/2015 19:48:19 - INFO - Device connected with USB debugging off
05/048/2015 19:48:19 - INFO - For 2011 devices line, be sure you are not in MTP mode
I think I had USB Debugging on (I install CWM before install ROM), but now I can't check it or change it, because I have a brick
I reset my phone just like was written in THIS thread, when the RED LED appear i prepare my flashtool to flash and then plug in my phone to PC, but then nothing happend and RED LED appear again. Flashtool didn't see my phone.
After few minutes pluged in charger RED LED disapear and back to begining.
There are any solution to fix my phone?
So i have this Xperia S from my sister here, and something really strange is happening with it:
First of all: the phone doesn't turn on. When i put the phone in the charger it just keeps with the red led on but the led never goes green, it's like the phone never finish charging.
Second: after some time in the charger, the red led goes off and the phone keeps in a black screen. If the phone is connected on the PC when this happens, a driver named "SOMC Flash Device" is installed. I read that this means that the phone is bricked but the difference in my case is that i can enter in flashmode but:
I can't flash any stock ROM on this phone. I can put the phone on flashmode, but when i start the flash on Flashtool it gives me a error of Flash aborted and then i think that the phone tries to restart because the green led suddenly goes off and then the PC emits the disconnect sound. Sometimes even when flashtool is not doing anything the phone just restarts itself.
I already left the phone on the charger for several hours but nothing happens, the phone just keeps on the red led for some time and after that it keeps on a black screen. I can't do much thing in fastboot mode because i think that the bootloader is locked.
Can someone help me?