i flashed a sprint galaxy s2 to verizon prepaid. i wrote nv items,prl files, mobile profile 0. im still wondering why only verizon 3g is working. i can not make calls or anything else.
carshass said:
removed
Click to expand...
Click to collapse
I think this is illegal after recent law changes/new laws.
Sent from my SPH-D710 using xda app-developers app
If I am not mistaken, the laws only apply to GSM devices.
Sent from my SPH-D710 using xda app-developers app
Also, only phones purchased on or after the effective date of the new law.
If you can get the E4GT fully working on Verizon let me know. I have Verizon now and I miss using my E4GT.
Sent from my SPH-D710 using xda premium
I've gotten the E4GT working on VZW. I have to find the guide I wrote for myself and I'll share.
Sent from my Galaxy Nexus using xda app-developers app
EDIT: here you guys go.
I'm going to assume you have experience with manually provisioning a CDMA device onto a different network.
The phone I used at the time was a Samsung Fascinate.
As long as your VZW donor phone will give up the CAVE and pretty much all the info needed in this post easily, you should have no problem getting talk, text, and data working on VZW.
Code:
e4gt password = 01F2030F5F678FF9
QPST Section:
Copy all the info from your donor phone into the sections labeled INFO_HERE
CDMA TAB
NAM1: Name = Empty
Directory # = INFO_HERE
AOC = 2
CDMA: MCC = 310
11_12 = 00
IMSI_S = INFO_HERE
Channel A Primary B
283 384
A secondary B
691 777
CDMA-2 TAB
MCC = 000
11_12 = 00
IMSI_S = INFO_HERE
AMPS: Phone Number = INFO_HERE
Home SID 2004
M.IP: prof 0
enabled = yes
nai = [email protected]
tethered nai = [email protected]
MN-HA SPI = 12C
DMU Public Key ID = 10
MN-AAA SPI 2
Primary HA Address = 255.255.255.255
Secondary HA Address = ^^^^^^^^^^^^^
RFC2002bis MN-HA authenticator calculation CHECKED - DATA WILL FAIL IF UNCHECKED
Use QXDM to dump your HA/AAA shared secrets
ha = INFO_HERE
aaa = INFO_HERE
Use CDMA WS to get AKEY/CAVE info
AKEY: INFO_HERE
SSD_A: INFO_HERE
SSD_B: INFO_HERE
You can also use CDMA WS to do the ESN/MEID switcheroo from the donor phone.
Or you can use DFS to do it later while you're doing the PPP configs.
Use DFS to program PPP - It's easier than having 2 or 3 different version of QPST
PAP:
UID = NAI
Pwd = AAA key - NEEDS TO BE IN HEX
PPP:
SIP NAI = tethered nai
UID = nai
Pwd = AAA key - NEEDS TO BE IN HEX
HDR AN:
NAI = NAI
Pwd = AAA key - NEEDS TO BE IN HEX
HDR AN Long
UID = NAI
Pwd = AAA key - NEEDS TO BE IN HEX
HDR AN PPP
UID = NAI
Pwd = AAA key - NEEDS TO BE IN HEX
check Authentification require password encryption
PPP Config
Um: User ID = [email protected]
Tethered NAI = [email protected]
AN: User ID = [email protected]
ESN INFO_HERE
MEID INFO_HERE
AKEY = INFO_HERE
SSD_A = INFO_HERE
SSD_B = INFO_HERE
original E4GT MSL = INFO_HERE - Don't forget to change the MSL/SPC to 000000 to make your life easier.
Oh and flash the Verizon PRL too.
^^^^^^^^ click me
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Related
So when you activate a new phone you have to do all the *228 stuff to register it on verizons network. Since the phone gets programmed OTA you have to be using a Verizon network. Thats where my first problem happened. Since I'm in Alaska and there are no Verizon towers (just partners) everywhere is roaming and you cannot do the OTA update/activation.
I got the phone programmed by changing the NAM settings by "calling" ##778 but only voice and sms work right now.
Now the only problem is that I don't know exactly what I need to change to get the data communications working. I know in order to use data communication on a partner network (while in roaming) you have to first use some kind of data transfer on a verizon network. I can only guess that is so the phone gets programmed properly.
If anyone would care to share their knowledge or share their Modem Settings and M.IP profile information hopefully I can get this thing working 100% again; and by not using verizon's "only" method (as the customer service says)
Call back VZW and tell them that you need to do a manual program - I used to work there and they should walk you through all of the steps/entry over the phone.
For what it's worth - Here are my settings
M.IP Settings
Number of Profiles: 1
Active User Profile Index: 0
MIP MODE: Mobile IP Preferred
MIP Registration Retries: 2
MIP Registration Retry Timeout: 0
Mobile Node-HA Authentication: Enable
Send a Registration Request: Disable
Dormant Handoff Optimization: Enable
___________________________________________
M.IP Default Profile
Enable Profile: Enable
NAI: [email protected]
DUN NAIL: Failed
MN HA SPI Set: Enable
MN HA SPI Value: 12C
MN AAA SPI Set: Enable
MN AAA SPI Value: 2
Reverse Tunneling Preferred: Enable
Home Address: 0.0.0.0
Primary HA Address: 255.255.255.255
Secondary HA Address: 255.255.255.255
DMU Public Key: 10
_____________________________________________________
Modem Settings
Slot Cycle Index: 2
Preferred Serving System: Automatic
Preferred Mode: Automatic
HDR Hybrid Preferred: Enable
Clear All MRU Entry: No
Rev A. Enable
1x Diversity: Disable
I appreciate the insight espmetalhead, however when I called vzw and asked them about manually programming it they said the only thing they can manually program is voice/sms. To program the phone for data you HAVE to be in a verizon network no matter what. I don't really understand why. I have another phone (blackberry 8330) that has working data communication here in alaska. WHy can't you just take whatever settings the blackberry has for data and use it on the incredible? lol. man, its so frustrating. I really don't want to ship my phone to my parents and walk them through programming the incredible for me haha.
espmetalhead: hopefully in your experience you've came across a way to manually program a phone for data communication...
There is a way to do it from what I remember, you just have to get to a data tech this is high enough in the chain so they can do a walk through. A csr over the phone should be able to route you to the right person. I know I did some Windows Mobile device manual programs that fired up data.
Sent from my ADR6300 using XDA App
akrutsinger said:
I appreciate the insight espmetalhead, however when I called vzw and asked them about manually programming it they said the only thing they can manually program is voice/sms. To program the phone for data you HAVE to be in a verizon network no matter what. I don't really understand why. I have another phone (blackberry 8330) that has working data communication here in alaska. WHy can't you just take whatever settings the blackberry has for data and use it on the incredible? lol. man, its so frustrating. I really don't want to ship my phone to my parents and walk them through programming the incredible for me haha.
espmetalhead: hopefully in your experience you've came across a way to manually program a phone for data communication...
Click to expand...
Click to collapse
Unfortunately, you have to be in the Vz network to program for data. They use an authentication key that can only be transmitted OTA through their own network for data services. It's a CDMA thing, so there's really no way around it.
so why isn't it possible to just read the key to me over the phone or something?
Idk, it just doesn't seem right. It seems like that has to be a way to do it manually...
Maybe I'm just in denial because I really don't want to send it back to the lower 48
Manually Programming for Data
Does anyone know how to program the Incredible to get data? For some reason after updating to 2.3.4 it just quick making calls and getting onto mobile networks. I solved the making calls issue by manually programming it through ##778. But now I'm without data, so does anyone have any ideas on how to get this accomplished? Any help would be great! Thanks!
need help for activating my phone
espmetalhead said:
Call back VZW and tell them that you need to do a manual program - I used to work there and they should walk you through all of the steps/entry over the phone.
For what it's worth - Here are my settings
M.IP Settings
Number of Profiles: 1
Active User Profile Index: 0
MIP MODE: Mobile IP Preferred
MIP Registration Retries: 2
MIP Registration Retry Timeout: 0
Mobile Node-HA Authentication: Enable
Send a Registration Request: Disable
Dormant Handoff Optimization: Enable
___________________________________________
M.IP Default Profile
Enable Profile: Enable
NAI: [email protected]
DUN NAIL: Failed
MN HA SPI Set: Enable
MN HA SPI Value: 12C
MN AAA SPI Set: Enable
MN AAA SPI Value: 2
Reverse Tunneling Preferred: Enable
Home Address: 0.0.0.0
Primary HA Address: 255.255.255.255
Secondary HA Address: 255.255.255.255
DMU Public Key: 10
_____________________________________________________
Modem Settings
Slot Cycle Index: 2
Preferred Serving System: Automatic
Preferred Mode: Automatic
HDR Hybrid Preferred: Enable
Clear All MRU Entry: No
Rev A. Enable
1x Diversity: Disable
Click to expand...
Click to collapse
hi this is Waseem from Pakistan i am facing much problems in activating my HTC droid incredible 2.
i have tried alot to update my phone but it's not working and the activation dialer is also work-less. please guide me through the whole procedure, what should i do next to activate my phone. i already have restored the factory setting twice but still not updating... i wil be very thankful to you for this act of kindness.
Ruud Westerhout said:
As a matter of interest :
1) Should I be disconnected from the net when I do this ?
2) Should I be taking the GSM-Card out of the phone when doing this
3) If I do a hard-reset now, and being asked x-cancel 0-hard-reset, what would be the result ?
4) Are there any other reasons for the device not being recognized, or not for soo long ?
PS. I am using the internet through a router/firewall and I am not using the XP-firewall.
Click to expand...
Click to collapse
This is the forums for the first gen incredible not incredible 2.
Sent from my One using Tapatalk
So I've read all of the claims that the EVO simply won't work if you're in an AWS market. Fine, no problem. Somehow i've managed to get it to work for me though! Well, talk and text on the android plan anyway. I still can't seem to get data working though :/ I was wondering if anyone could help me with this.
I started out with myn-WarmTwoPointTwo--RLS-4-Cricket-Zmod played around with settings for about 4 days and finally managed to get talk and text working. However, my "4G" radio would only take me to a webpage that asks me to sign up for clear internet service when I opened the web browser(Hmm i wonder what would happen if i signed in with my clear account, I'll try that in a moment).
Someone mentioned I go for JimminyV's cricket ROM. So i gave that a try and there didn't seem to be any difference at all, but i couldn't get a mobile network connection, so i'm thinking this ROM won't do the trick for me, I went back to twoPointTwo.
I've taken bits from all kinds of tutorials, including JImminyV's ROM post:
http://forum.xda-developers.com/showthread.php?t=784776
The Zmods:
http://forum.xda-developers.com/showthread.php?t=795126
EPST programming codes:
http://forum.xda-developers.com/showthread.php?t=737594
some post ztahoez made over at CDMAGurus.com etc.
Played around with ##Data#(I should give you my settings in there):
Data Profile:
Active Profile = 1
User Name = my#@mycricket.com
SPI MN-HA = 12C
SPI MN-AAA = 2
Reverse Tunnel Preferred = Enable
Home IP = 0.0.0.0
Primary Home Agen = 68.28.15.12
Second Home Agent = 68.28.31.12
HA and AAA shared secret = cricket
DSA Server URL = (couldn't find any info on this so i just wrote https://dsa.mycricket.com) any bells ringing?
EVDO:
DDTM = Enable
Preferred Mode = Auto
Advanced:
MEID = a hex value that can't be edited and i'm not sure if it's safe to share
P_REV = IS-2000(6)
SCM = 58
Slot Mode = Enable
Slot Cycle Index = 1
MMC = 310 - I'm in the US
MNC = 00
MSID = 4433070623 - anyone familiar with that MSID?
ACCOLC = 3
Vocoder = Enable
EVRC-B = Disable
Home and Roam ORig = Voice 13k
LBS PDE IP and Port = unavailable - what is that?
Foreign NID and SID registration = Enabled
DDTM = Enable
Home SID/NID #1 = 6535/65535 - I can't find info for this anywhere
MMS Server URL = http://mms.mycricket.com/mycricket/mms.php
RTSP Proxy Port = 554
RTSP Proxy Address = 0.0.0.0
HTTP PD Proxy Port = 8085
HTTP PD Proxy Address = 0.0.0.0
WiMAX:
Standby Time(minute) = 10
SCAN RATE = 30
NAI = [email protected]
User Name = my#@mycricket.com
Realm = mycricket.com?
a whole bunch of craziness
TLS = enabled
TTLS = disabled
My PRL is 06399
Hmm after messing around with JimminyV's ROM, I can't seem to connect to clear's sign in prompt anymore :/
Other Common problems:
I keep getting error code 65, which with a little googling, means that there's an authentication issue, somewhere :/
[EDIT] I forgot to mention that ##778# and *228 don't work, and if i use *22804, I'll usually connect to Verizon Wireless' configuration menu [/EDIT]
I've tried to be as thorough as i could be. Please let me know if you have any questions for me and if you can help, THANKS!!!
I guess I can post this over at CDMAgurus too, but just wanted you to know, that i was able to log into clear with my account lol(i'd better check if i've been charged, or the lol will be on me.
Hey here, yes here, this is why:....
HEY HERE, YES HERE, THIS IS WHY:....
The reason as to why you only get talk/text on cricket with a dual band phone on a tri-band area/AWS is the following:
Your plan has a national access/roaming (talk/text), meaning that everywhere you go, you will be able to get AT LEAST talk and text. On the regular cricket network, you get EVERYTHING.
Your phone is actually connected to sprints tower because sprint is the roaming partner with cricket. the agreement DOES NOT allows data usage, only talk/text ( i will assume because talk/text does not takes as much bandwidth as data does)
So, to sum-up:
ANY DUAL-BAND PHONE on a AWS market will be on a "Roaming Partner Network"
This is because you are using SPRINTS network (or any other romaing partner network), and the agreement only lets you use talk/text.
HOWEVER, if you take your phone where cricket offers a native DUAL BAND (800/1900) frequency, you will have data working.
Numerous people are sadly mistaken when it comes they're understanding of the Cricket EVO's functionality in triband areas. They have been lead to believe that it's impossible to get it to work or to get all of its features working, but this is about as far from the truth as it gets. People are quick to rely on information which they haven't actually tested themselves. They're like the folks in Columbus's day who didn't believe that the earth is round, but here are the facts...I live in Chicago, which is a triband area, and have been using a fully flashed Cricket EVO for quite some time now with out a single problem whatsoever. Everyone one of my features work perfectly fine, and my network is NOT roaming. Looks like Cricket EVOs work in triband areas afterall!
yeah you're not the first person to say that, but no one's been able to prove it. or show how to do it.
Laserbeak43 said:
yeah you're not the first person to say that, but no one's been able to prove it. or show how to do it.
Click to expand...
Click to collapse
I've been using the proof for a couple of months now & as far as how to do it is concerned, it's posted all over this website & others.
RioSoul said:
I've been using the proof for a couple of months now & as far as how to do it is concerned, it's posted all over this website & others.
Click to expand...
Click to collapse
Last i checked(for weeks) It couldn't be done on cricket. I've had voice but had to use clear for data.
so yyeah i've searched all EVO forums for Cricket and Triband and there's no thread that posts a solution, there are only 3 threads as a matter of fact.
So which thread were you talking about?
bumping this one, willing to donate to a dev of your choice if someone can help me get this EVO working in st. louis. i understand the AWS issues, but i think as a lot have said, that its possible in AWS markets. im willing to try anything. internet works great here with full 3g, just no getting cricket programming when *228, and *22804 does nothing but sit and then hand up. 611 says your account can not be validated.
On my Epic 4G I am having an issue. My son recently added a password to my phone that he does not remember and I do not know. I would just do a factory reset and call it good but, I have important Text messages and voicemails on my phone that I require for my job. Is there anyway I can remove or reset the unlock code on the phone and still keep my stuff for my job? The phone is also rooted currently.
pavaccar said:
On my Epic 4G I am having an issue. My son recently added a password to my phone that he does not remember and I do not know. I would just do a factory reset and call it good but, I have important Text messages and voicemails on my phone that I require for my job. Is there anyway I can remove or reset the unlock code on the phone and still keep my stuff for my job? The phone is also rooted currently.
Click to expand...
Click to collapse
Your voicemails can be obtained by dialing into your voicemail from another phone. They are stored on Sprint's server. As for the messages you can boot into CWM, make a backup of your system, then do a Factory Data reset. Download Titanium and use it to restore from the backup since it can restore data from within a nandroid now.(I am sure someone will have an easier way).
Boot into cwm and try doing a cache wipe and dalvik cache wipe. Tha may clear the password. And u should get ur messages again
Sent from my SPH-D700 using xda premium
cant u just use ur gmail to take the password off?
lilajrestnom said:
cant u just use ur gmail to take the password off?
Click to expand...
Click to collapse
Yes. Just keep putting in incorrect info and it will ask for your Gmail.
Sent from my OG Epic running MIUI4 ICS powered by ShadowKernel
marcusant, are you saying that if you continue to enter the incorrect passcode on the main screen of the phone, that by entering your gmail info, it will unlock the phone without wiping any data?
Yes that's exactly wa he is sayin. For that exact reason... some ppl make mistakes nd that's a failsafe for that problem... I have done it numerous times... after bout 5 it will prompt u with that...
Sent from my SPH-D700 using XDA App
samsung all codes i have hope it helps anyone
here is a list of all Galaxy S Secret Codes
and they all work enjoy!!!
*#06# = IMEI Number.
*#1234# = Firmware Version.
*#2222# = H/W Version.
*#8999*8376263# = All Versions Together.
*#8999*8378# = Test Menu.
*#4777*8665# = GPSR Tool.
*#8999*523# = LCD Brightness.
*#8999*377# = Error Menu.
*#8999*327# = EEP Menu.
*#8999*667# = Debug Mode.
*#92782# = PhoneModel. (Wap)
#*5737425# = JAVA Mode.
*#2255# = Call List.
*#232337# = Bluetooth MAC Adress.
*#5282837# = Java Version.
#*4773# = Incremental Redundancy.
#*7752# = 8 PSK uplink capability bit.
#*7785# = Reset wakeup & RTK timer cariables/variables.
#*7200# = Tone Generator Mute.
#*3888# = BLUETOOTH Test mode.
#*7828# = Task screen.
#*#8377466# = S/W Version & H/W Version.
#*2562# = Restarts Phone.
#*2565# = No Blocking? General Defense.
#*3353# = General Defense, Code Erased.
#*3837# = Phone Hangs on White screen.
#*3849# = Restarts Phone.
#*3851# = Restarts Phone.
#*3876# = Restarts Phone.
#*7222# = Operation Typ: (Class C GSM)
#*7224# = !!! ERROR !!!
#*7252# = Operation Typ: (Class B GPRS)
#*7271# = CMD: (Not Available)
#*7274# = CMD: (Not Available)
#*7337# = Restarts Phone. (Resets Wap Settings)
#*2787# = CRTP ON/OFF.
#*2886# = AutoAnswer ON/OFF.
#*3737# = L1 AFC.
#*5133# = L1 HO Data.
#*7288# = GPRS Detached/Attached.
#*7287# = GPRS Attached.
#*7666# = White Screen.
#*7693# = Sleep Deactivate/Activate.
#*7284# = L1 HO Data.
#*2256# = Calibration info? (For CMD set DEBUGAUTONOMY in cihard.opt)
#*2286# = Databattery.
#*2527# = GPRS switching set to (Class 4, 8, 9, 10)
#*2679# = Copycat feature Activa/Deactivate.
#*3940# = External looptest 9600 bps.
#*4263# = Handsfree mode Activate/Deactivate.
#*4700# = Please use function 2637.
#*7352# = BVMC Reg value (LOW_SWTOFF, NOMINAL_SWTOFF)
#*2558# = Time ON.
#*3370# = Same as 4700.
#*3941# = External looptest 115200 bps
#*5176# = L1 Sleep.
#*7462# = SIM Phase.
#*7983# = Voltage/Freq.
#*7986# = Voltage.
#*8466# = Old Time.
#*2255# = Call Failed.
#*5187# = L1C2G trace Activate/Deactivate.
#*5376# = DELETE ALL SMS!!!!.
#*6837# = Official Software Version: (0003000016000702)
#*7524# = KCGPRS: (FF FF FF FF FF FF FF FF 07)
#*7562# = LOCI GPRS: (FF FF FF FF FF FF FF FF FF FF FF FE FF 01)
#*2337# = Permanent Registration Beep.
#*2474# = Charging Duration.
#*2834# = Audio Path. (Handsfree)
#*3270# = DCS Support Activate/Deactivate.
#*3282# = Data Activate/Deactivate.
#*3476# = EGSM Activate/Deactivate.
#*3676# = FORMAT FLASH VOLUME!!!
#*4760# = GSM Activate/Deactivate.
#*4864# = White Screen.
#*5171# = L1P1.
#*5172# = L1P2.
#*5173# = L1P3.
#*7326# = Accessory.
#*7683# = Sleep variable.
#*8465# = Time in L1.
#*2252# = Current CAL.
#*2836# = AVDDSS Management Activate/Deactivate.
#*3877# = Dump of SPY trace.
#*7728# = RSAV.
#*2677# = Same as 4700.
#*3728# = Time 2 Decod.
#*3725# = B4 last off.
#*7372# = Resetting the time to DPB variables.
#*7732# = Packet flow context bit Activate/Deactivate.
#*6833# = New uplink establishment Activate/Deactivate.
#*3273# = EGPRS multislot. (Class 4, 8, 9, 10)
#*7722# = RLC bitmap compression Activate/Deactivate.
#*2351# = Blinks 1347E201 in RED.
#*4472# = Hysteresis of serving cell: 3 dB
#*2775# = Switch to 2 inner speaker.
#*9270# = Force WBS.
#*7878# = FirstStartup. (0=NO, 1=YES)
#*3757# = DSL UART speed set to. (LOW, HIGH)
#*8726# = Switches USBACM to Normal.
#*8724# = Switches USBACM to Generator mode.
#*8727# = Switches USBACM to Slink mode.
#*8725# = Switches USBACM to Loop-back mode.
#*3838# = Blinks 3D030300 in RED.
#*2077# = GPRS Switch.
#*2027# = GPRS Switch.
#*0227# = GPRS Switch.
#*0277# = GPRS Switch.
#*8370# = Tfs4.0 Test 0.
#*8371# = Tfs4.0 Test 1.
#*8372# = Tfs4.0 Test 2.
#*8373# = Tfs4.0 Test 3.
#*8374# = Tfs4.0 Test 4.
#*8375# = Tfs4.0 Test 5.
#*8376# = Tfs4.0 Test 6.
#*8377# = Tfs4.0 Test 7.
#*8378# = Tfs4.0 Test 8.
#*8379# = Tfs4.0 Test 9.
#*7878# = FirstStartup. (0=NO, 1=YES)
#*3838# = Blinks 3D030300 in RED.
#*2077# = GPRS Switch.
#*2027# = GPRS Switch.
#*0227# = GPRS Switch.
#*0277# = GPRS Switch.
#*22671# = AMR REC START.
#*22672# = Stop AMR REC. (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# = Pause REC.
#*22674# = Resume REC.
#*22675# = AMR Playback.
#*22676# = AMR Stop Play.
#*22677# = Pause Play.
#*22678# = Resume Play.
#*77261# = PCM Rec Req.
#*77262# = Stop PCM Rec.
#*77263# = PCM Playback.
#*77264# = PCM Stop Play.
#*22679# = AMR Get Time.
*#8999*364# = Watchdog ON/OFF.
*#8999*427# = WATCHDOG signal route setup.
*2767*226372# = Camera Reset. (deletes photos)
*2767*3855# = E2P Full Reset.
*2767*2878# = E2P Custom Reset.
*2767*927# = E2P Wap Reset.
*2767*226372# = E2P Camera Reset.
*2767*688# = Reset Mobile TV.
#7263867# = RAM Dump. (On or Off)
Galaxy S II Retail mode password: 5444
samsung mobile code. - - - global code.
*#1234# = Firmware Version.
*#2222# = H/W Version.
*#8999*8376263# = All Versions Together.
*#8999*8378# = Test Menu.
*#4777*8665# = GPSR Tool.
*#8999*523# = LCD Brightness.
*#8999*377# = Error Menu.
*#8999*327# = EEP Menu.
*#8999*667# = Debug Mode.
*#92782# = PhoneModel. (Wap)
#*5737425# = JAVA Mode.
*#2255# = Call List.
*#232337# = Bluetooth MAC Adress.
*#5282837# = Java Version.
#*4773# = Incremental Redundancy.
#*7752# = 8 PSK uplink capability bit.
#*7785# = Reset wakeup & RTK timer cariables/variables.
#*7200# = Tone Generator Mute.
#*3888# = BLUETOOTH Test mode.
#*7828# = Task screen.
#*#8377466# = S/W Version & H/W Version.
#*2562# = Restarts Phone.
#*2565# = No Blocking? General Defense.
#*3353# = General Defense, Code Erased.
#*3837# = Phone Hangs on White screen.
#*3849# = Restarts Phone.
#*3851# = Restarts Phone.
#*3876# = Restarts Phone.
#*7222# = Operation Typ: (Class C GSM)
#*7224# = !!! ERROR !!!
#*7252# = Operation Typ: (Class B GPRS)
#*7271# = CMD: (Not Available)
#*7274# = CMD: (Not Available)
#*7337# = Restarts Phone. (Resets Wap Settings)
#*2787# = CRTP ON/OFF.
#*2886# = AutoAnswer ON/OFF.
#*3737# = L1 AFC.
#*5133# = L1 HO Data.
#*7288# = GPRS Detached/Attached.
#*7287# = GPRS Attached.
#*7666# = White Screen.
#*7693# = Sleep Deactivate/Activate.
#*7284# = L1 HO Data.
#*2256# = Calibration info? (For CMD set DEBUGAUTONOMY in cihard.opt)
#*2286# = Databattery.
#*2527# = GPRS switching set to (Class 4, 8, 9, 10)
#*2679# = Copycat feature Activa/Deactivate.
#*3940# = External looptest 9600 bps.
#*4263# = Handsfree mode Activate/Deactivate.
#*4700# = Please use function 2637.
#*7352# = BVMC Reg value (LOW_SWTOFF, NOMINAL_SWTOFF)
#*2558# = Time ON.
#*3370# = Same as 4700.
#*3941# = External looptest 115200 bps
#*5176# = L1 Sleep.
#*7462# = SIM Phase.
#*7983# = Voltage/Freq.
#*7986# = Voltage.
#*8466# = Old Time.
#*2255# = Call Failed.
#*5187# = L1C2G trace Activate/Deactivate.
#*5376# = DELETE ALL SMS!!!!.
#*6837# = Official Software Version: (0003000016000702)
#*7524# = KCGPRS: (FF FF FF FF FF FF FF FF 07)
#*7562# = LOCI GPRS: (FF FF FF FF FF FF FF FF FF FF FF FE FF 01)
#*2337# = Permanent Registration Beep.
#*2474# = Charging Duration.
#*2834# = Audio Path. (Handsfree)
#*3270# = DCS Support Activate/Deactivate.
#*3282# = Data Activate/Deactivate.
#*3476# = EGSM Activate/Deactivate.
#*3676# = FORMAT FLASH VOLUME!!!
#*4760# = GSM Activate/Deactivate.
#*4864# = White Screen.
#*5171# = L1P1.
#*5172# = L1P2.
#*5173# = L1P3.
#*7326# = Accessory.
#*7683# = Sleep variable.
#*8465# = Time in L1.
#*2252# = Current CAL.
#*2836# = AVDDSS Management Activate/Deactivate.
#*3877# = Dump of SPY trace.
#*7728# = RSAV.
#*2677# = Same as 4700.
#*3728# = Time 2 Decod.
#*3725# = B4 last off.
#*7372# = Resetting the time to DPB variables.
#*7732# = Packet flow context bit Activate/Deactivate.
#*6833# = New uplink establishment Activate/Deactivate.
#*3273# = EGPRS multislot. (Class 4, 8, 9, 10)
#*7722# = RLC bitmap compression Activate/Deactivate.
#*2351# = Blinks 1347E201 in RED.
#*4472# = Hysteresis of serving cell: 3 dB
#*2775# = Switch to 2 inner speaker.
#*9270# = Force WBS.
#*7878# = FirstStartup. (0=NO, 1=YES)
#*3757# = DSL UART speed set to. (LOW, HIGH)
#*8726# = Switches USBACM to Normal.
#*8724# = Switches USBACM to Generator mode.
#*8727# = Switches USBACM to Slink mode.
#*8725# = Switches USBACM to Loop-back mode.
#*3838# = Blinks 3D030300 in RED.
#*2077# = GPRS Switch.
#*2027# = GPRS Switch.
#*0227# = GPRS Switch.
#*0277# = GPRS Switch.
#*8370# = Tfs4.0 Test 0.
#*8371# = Tfs4.0 Test 1.
#*8372# = Tfs4.0 Test 2.
#*8373# = Tfs4.0 Test 3.
#*8374# = Tfs4.0 Test 4.
#*8375# = Tfs4.0 Test 5.
#*8376# = Tfs4.0 Test 6.
#*8377# = Tfs4.0 Test 7.
#*8378# = Tfs4.0 Test 8.
#*8379# = Tfs4.0 Test 9.
#*7878# = FirstStartup. (0=NO, 1=YES)
#*3838# = Blinks 3D030300 in RED.
#*2077# = GPRS Switch.
#*2027# = GPRS Switch.
#*0227# = GPRS Switch.
#*0277# = GPRS Switch.
#*22671# = AMR REC START.
#*22672# = Stop AMR REC. (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# = Pause REC.
#*22674# = Resume REC.
#*22675# = AMR Playback.
#*22676# = AMR Stop Play.
#*22677# = Pause Play.
#*22678# = Resume Play.
#*77261# = PCM Rec Req.
#*77262# = Stop PCM Rec.
#*77263# = PCM Playback.
#*77264# = PCM Stop Play.
#*22679# = AMR Get Time.
*#8999*364# = Watchdog ON/OFF.
*#8999*427# = WATCHDOG signal route setup.
*2767*226372# = Camera Reset. (deletes photos)
*2767*3855# = E2P Full Reset.
*2767*2878# = E2P Custom Reset.
*2767*927# = E2P Wap Reset.
*2767*226372# = E2P Camera Reset.
*2767*688# = Reset Mobile TV.
#7263867# = RAM Dump. (On or Off)
samsung mobile code. - - - wap / mms code.
*2767*43927# = Austria WAP Settings.
*2767*420927# = Czech WAP Settings.
*2767*33927# = France WAP Settings.
*2767*49927# = Germany WAP Settings.
*2767*30927# = Greece WAP Settings.
*2767*39927# = Italy WAP Settings.
*2767*31927# = Netherlands WAP Settings.
*2767*351927# = Portugal WAP Settings.
*2767*7927# = Russia WAP Settings.
*2767*34927# = Spain WAP Settings.
*2767*46927# = Sweden WAP Settings.
*2767*44927# = UK WAP Settings.
*2767*380927# = Ukraine WAP Settings.
*2767*73738927# = WAP Settings Reset.
*2767*43667# = Austria MMS Settings.
*2767*420667# = Czech MMS Settings.
*2767*33667# = France MMS Settings.
*2767*49667# = Germany MMS Settings.
*2767*30667# = Greece MMS Settings.
*2767*39667# = Italy MMS Settings.
*2767*31667# = Netherlands MMS Settings.
*2767*351667# = Portugal MMS Settings.
*2767*7667# = Russia MMS Settings.
*2767*34667# = Spain MMS Settings.
*2767*46667# = Sweden MMS Settings.
*2767*44667# = UK MMS Settings.
*2767*380667# = Ukraine MMS Settings.
samsung mobile code. - - - email code.
#*36245# Turns Email TestMenu on.
*2767*22236245# Email EPP set (....)!
*2767*837836245# Email Test Account!
*2767*29536245# Email Test2 Account!
*2767*036245# Email EPP reset!
*2767*136245# Email EPP set (1)!
*2767*736245# Email EPP set (7)!
*2767*3036245# Email...
*2767*3136245# Email...
*2767*3336245# Email...
*2767*3436245# Email...
*2767*3936245# Email...
*2767*4136245# Email...
*2767*4336245# Email...
*2767*4436245# Email...
*2767*4536245# Email...
*2767*4636245# Email...
*2767*4936245# Email...
*2767*6036245# Email...
*2767*6136245# Email...
*2767*6236245# Email...
*2767*6336245# Email...
*2767*6536245# Email...
*2767*6636245# Email...
*2767*8636245# Email...
*2767*85236245# Email...
samsung mobile code. - - - lock code.
*#7465625# = Check the locks.
*7465625*638*Code# = Enables Network lock.
#7465625*638*Code# = Disables Network lock.
*7465625*782*Code# = Enables Subset lock.
#7465625*782*Code# = Disables Subset lock.
*7465625*77*Code# = Enables SP lock.
#7465625*77*Code# = Disables SP lock.
*7465625*27*Code# = Enables CP lock.
#7465625*27*Code# = Disables CP lock.
*7465625*746*Code# = Enables SIM lock.
#7465625*746*Code# = Disables SIM lock.
*7465625*228# = Activa lock ON.
#7465625*228# = Activa lock OFF.
*7465625*28638# = Auto Network lock ON.
#7465625*28638# = Auto Network lock OFF.
*7465625*28782# = Auto subset lock ON.
#7465625*28782# = Auto subset lock OFF.
*7465625*2877# = Auto SP lock ON.
#7465625*2877# = Auto SP lock OFF.
*7465625*2827# = Auto CP lock ON.
#7465625*2827# = Auto CP lock OFF.
*7465625*28746# = Auto SIM lock ON.
#7465625*28746# = Auto SIM lock OFF.
samsung mobile code. - - - sound code.
Samsung phones.
Dial *#6984125*#
Test menu dial *#9072641*# (You need this one i think.)
Click 5 Audio - 2 AP volume config
Now you see zie je 4 things:
1 RCV config
2 EAR config
3 SPK config
4 BTH config
Now you see this:
1 MP volume
2 Keytone volume
3 Ringtone volume
4 Rec volume
5 FM radio volume
6 Camera volume
7 Voice call volume
8 Vt call volume
9 Voice memo volume
( SPK = Speaker )( Ear = Headset )
Tune Headset volume:
*#9072641*# - 2 EAR config - 3 Ringtone volume - Stap 6 tune it to 10
Tune movie volume:
*#9072641*# - 3 SPK config - 3 Ringtone volume - Stap 6 tune it to 10
Note it works but don't forget to type somewhere your old settings.
==========================================================
Samsung Symbian phones.
Dial *#0002*28346#
Now you will have this menu:
Test Audio
1 Voice Call
2 Play Sound
3 Record
4 VT Call
5 FM Radio
6 Back up
Push on 2 or go to Play Sound.
Now you have this list:
1 MP3 LoudSPK
2 MP3 HeadPHN
3 MP4 LoudSPK
4 MP4 HeadPHN
5 RING LoudSPK
6 RING HeadPHN
7 KT LoudSPK
8 KT HeadPHN
9 EQ LoudSPK
10 EQ HeadPHN
( Do not go higher than 6db )
Opvoeren Headset sound:
*#0002*28346# - 2 Play Sound - 2 MP3 HeadPHN - HS Gain - number 6.
Opgrade your movie sound:
*#0002*28346# - 2 Play Sound - 3 MP4 LoudSPK - DR Gain - number 6.
High sound by recording I8910
*#0002*28346# - 3 Records – CamcordAMR_AMR - 30 Change to 24.
Note it works but don't forget to type somewhere your old settings.
==========================================================
Samsung Windows Mobile phones.
Dail: *#0002*28346#
Now coms this:
Audio Gain:
Current Parth = XXXXXXXXXX
Music Speaker
Music 4p Earphone
FM Radio Earphone
FM Radio Speaker
Ringtone
Force Speaker
Voice Receiver
Voice Speaker
Voice 4p Earphone
Voice 3p Earphone
Voice Bleutooth (HFP)
Music Bleutooth (HFP)
Music 3p Earphone
TTYFull call
TTYHCO call
TTYVCO call
TVOUT
Choos want you want like ''Music Speaker'' and ''Music 4p Earphone''
Do the next things:
Music Speaker
Click on Music Speaker and on Gain.
OUTPUT VOLUME
L1VL2 set to 110
HPG7 set to 1110
L3L7 set to 10
OVL7 set to 00001001
OVR7 set to 00010010
And click on Apply - OK - Than Exit.
Music 4p Earphone
Klik op Music Speaker en dan op Gain.
OUTPUT VOLUME
L1VL2 set to 110
HPG7 set to 1110
L3L7 set to 10
OVL7set to 00001001
OVR7 set to 00010010
And click on Apply - OK - than Exit.
Note it works but don't forget to type somewhere your old settings.
OP must have figured out the gmail thing because he has not returned.
Hello, I am on pay as you go on EE and on Dolphin. I topped up £15 and it gave me 2gb data and 600 free texts for a month. One, I don't know how I'm gonna kill all of that!? Two it won't work. That was on my RandomROM Sense 4.1 version (USB Works BTW LEGIT I have my dhd) and it said
"Disconnected because service is unavailable". So looking here http://community.ee.co.uk/t5/produc...C-One-SV-and-TMobile-internet-data/td-p/37002 it says known problem about One SV (Which RandomROM is partly based upon) and it tells me to create a new APN.
Name = Internet
APN = everywhere (case sensitive)
Proxy = Leave Blank
Port = Leave Blank
Username = eesecure
Password = secure
Server = Leave Blank
MMSC = Leave Blank
MMS proxy = Leave Blank
MMS port = Leave Blank
MCC = 234
MNC = 30
Authentication type = PAP
APN type = default
APN protocol = IPv4
Bearer = Unspecified
Also APN protocol and Bearer don't seem to appear and when I save this configuration it doesn't save, all there is is the defaults that don't work.
Now I am trying it on TakTik 4.4. I edit the default EE Internet to MNC=30 and it randomly disappears from the list. Can anyone help me? (My Desire HD was previously carrier locked on Orange before I S-OFFed )
PS I want to stay on RandomROM (For development reasons)
anybody???
Have you tried any thing
Sent from my Sensation XL using Tapatalk
No thread bumping every few hours please !!!
Dr. Globbyglob said:
anybody???
Click to expand...
Click to collapse
just be a little more patient , bumping a thread every few hours doesn't help you a lot.
ceesheim said:
just be a little more patient , bumping a thread every few hours doesn't help you a lot.
Click to expand...
Click to collapse
Okay im a bit worried
When i try to change the mnc to 30 (by default it says 33) the saved apn disappears
Hi,
I'm trying to flash back two E4GT phones from PagePlus to Sprint (RingPlus MVNO). I get calls and text but no data. I suspect the mobile IP (M.IP) address maybe wrong. I'm hoping someone with more knowledge can help me out. I keep getting error 67. If anyone has QPST and can confirm their settings it would be much appreciated. Here are my current settings:
Settings tab- Service programming/field service/one time subsidy lock (uses 1) are all the MSL on the account. General = slot cycle 2, Current NAM=Nam1, Auto Nam = unchecked, SPC change enabled = checked.
CDMA tab- Nam Name = "SPCS", Directory = R+ phone number(10 digits no space/no dash), AOC=6, MCC=310, MNC = 10, IMSI_S = MSID (10 digits), Primary Channel A/B=283/384, Secondary Channel A/B=691/777, EVRC enabled for Home Page/Home Orig/Roam orig. Question here, I certain all is correct except for MNC. I've read 10, 12 and 120. QPST will only accept a 2 digit code for this field. Does it matter as it seems to work with both 10, 12 and even 00 (just not with 120).
CDMA-2 tab - NAM name = SPCS, Directory = R+ (10 digit number), True IMSI with MCC=310, MNC=12 and IMSI_S=MSID (10 digit)....Identical to first CDMA tab.
System tab - SID=4162, NID=65535, preferred mode = CDMA only, Band and Roam preference = Automatic
Roam tab- I loaded PRL 60690
Data tab- MDR mode = Svc Opt 33 pfrd, Pkt Dial String #777, Service option=IS-707
M.ip tab -
profile 0 (available = 0 and 1), NAI = R+ 10 digit [email protected], HA shared secret = text string "secret", AAA key=unknown what this value is and read that it's provided OTA at time of programming, Rev Tunnel Preferred=enabled, Home Address=0.0.0.0, Primary HA address = 68.28.81.76, Secondary HA address = 68.28.89.76, MN-HA SPI=4D2, MN-AAA SPI=4D2, DMU public key ID=0, DMU Mobile Authenticator=blank
Profile 1- Everything exactly the same as profile 0 with the only exception of Primary HA address = 255.255.255.255
Thanks in advance.
I used MVNOslayer to configure my phone to ringplus.
I am dealing with the same mip error 67. I kinda expect it since its a old phone that got replaced , i got two prevails now to flash,mod en xposed , and maybe decompile my odexed phones framework, Eventually ill look on my good rom but if ne thing I mod on dummy prevail to fix this I will surely let you kno bud or send file/link after i check on primary cell to ya since im on boost/sprint