So I've read all of the claims that the EVO simply won't work if you're in an AWS market. Fine, no problem. Somehow i've managed to get it to work for me though! Well, talk and text on the android plan anyway. I still can't seem to get data working though :/ I was wondering if anyone could help me with this.
I started out with myn-WarmTwoPointTwo--RLS-4-Cricket-Zmod played around with settings for about 4 days and finally managed to get talk and text working. However, my "4G" radio would only take me to a webpage that asks me to sign up for clear internet service when I opened the web browser(Hmm i wonder what would happen if i signed in with my clear account, I'll try that in a moment).
Someone mentioned I go for JimminyV's cricket ROM. So i gave that a try and there didn't seem to be any difference at all, but i couldn't get a mobile network connection, so i'm thinking this ROM won't do the trick for me, I went back to twoPointTwo.
I've taken bits from all kinds of tutorials, including JImminyV's ROM post:
http://forum.xda-developers.com/showthread.php?t=784776
The Zmods:
http://forum.xda-developers.com/showthread.php?t=795126
EPST programming codes:
http://forum.xda-developers.com/showthread.php?t=737594
some post ztahoez made over at CDMAGurus.com etc.
Played around with ##Data#(I should give you my settings in there):
Data Profile:
Active Profile = 1
User Name = my#@mycricket.com
SPI MN-HA = 12C
SPI MN-AAA = 2
Reverse Tunnel Preferred = Enable
Home IP = 0.0.0.0
Primary Home Agen = 68.28.15.12
Second Home Agent = 68.28.31.12
HA and AAA shared secret = cricket
DSA Server URL = (couldn't find any info on this so i just wrote https://dsa.mycricket.com) any bells ringing?
EVDO:
DDTM = Enable
Preferred Mode = Auto
Advanced:
MEID = a hex value that can't be edited and i'm not sure if it's safe to share
P_REV = IS-2000(6)
SCM = 58
Slot Mode = Enable
Slot Cycle Index = 1
MMC = 310 - I'm in the US
MNC = 00
MSID = 4433070623 - anyone familiar with that MSID?
ACCOLC = 3
Vocoder = Enable
EVRC-B = Disable
Home and Roam ORig = Voice 13k
LBS PDE IP and Port = unavailable - what is that?
Foreign NID and SID registration = Enabled
DDTM = Enable
Home SID/NID #1 = 6535/65535 - I can't find info for this anywhere
MMS Server URL = http://mms.mycricket.com/mycricket/mms.php
RTSP Proxy Port = 554
RTSP Proxy Address = 0.0.0.0
HTTP PD Proxy Port = 8085
HTTP PD Proxy Address = 0.0.0.0
WiMAX:
Standby Time(minute) = 10
SCAN RATE = 30
NAI = [email protected]
User Name = my#@mycricket.com
Realm = mycricket.com?
a whole bunch of craziness
TLS = enabled
TTLS = disabled
My PRL is 06399
Hmm after messing around with JimminyV's ROM, I can't seem to connect to clear's sign in prompt anymore :/
Other Common problems:
I keep getting error code 65, which with a little googling, means that there's an authentication issue, somewhere :/
[EDIT] I forgot to mention that ##778# and *228 don't work, and if i use *22804, I'll usually connect to Verizon Wireless' configuration menu [/EDIT]
I've tried to be as thorough as i could be. Please let me know if you have any questions for me and if you can help, THANKS!!!
I guess I can post this over at CDMAgurus too, but just wanted you to know, that i was able to log into clear with my account lol(i'd better check if i've been charged, or the lol will be on me.
Hey here, yes here, this is why:....
HEY HERE, YES HERE, THIS IS WHY:....
The reason as to why you only get talk/text on cricket with a dual band phone on a tri-band area/AWS is the following:
Your plan has a national access/roaming (talk/text), meaning that everywhere you go, you will be able to get AT LEAST talk and text. On the regular cricket network, you get EVERYTHING.
Your phone is actually connected to sprints tower because sprint is the roaming partner with cricket. the agreement DOES NOT allows data usage, only talk/text ( i will assume because talk/text does not takes as much bandwidth as data does)
So, to sum-up:
ANY DUAL-BAND PHONE on a AWS market will be on a "Roaming Partner Network"
This is because you are using SPRINTS network (or any other romaing partner network), and the agreement only lets you use talk/text.
HOWEVER, if you take your phone where cricket offers a native DUAL BAND (800/1900) frequency, you will have data working.
Numerous people are sadly mistaken when it comes they're understanding of the Cricket EVO's functionality in triband areas. They have been lead to believe that it's impossible to get it to work or to get all of its features working, but this is about as far from the truth as it gets. People are quick to rely on information which they haven't actually tested themselves. They're like the folks in Columbus's day who didn't believe that the earth is round, but here are the facts...I live in Chicago, which is a triband area, and have been using a fully flashed Cricket EVO for quite some time now with out a single problem whatsoever. Everyone one of my features work perfectly fine, and my network is NOT roaming. Looks like Cricket EVOs work in triband areas afterall!
yeah you're not the first person to say that, but no one's been able to prove it. or show how to do it.
Laserbeak43 said:
yeah you're not the first person to say that, but no one's been able to prove it. or show how to do it.
Click to expand...
Click to collapse
I've been using the proof for a couple of months now & as far as how to do it is concerned, it's posted all over this website & others.
RioSoul said:
I've been using the proof for a couple of months now & as far as how to do it is concerned, it's posted all over this website & others.
Click to expand...
Click to collapse
Last i checked(for weeks) It couldn't be done on cricket. I've had voice but had to use clear for data.
so yyeah i've searched all EVO forums for Cricket and Triband and there's no thread that posts a solution, there are only 3 threads as a matter of fact.
So which thread were you talking about?
bumping this one, willing to donate to a dev of your choice if someone can help me get this EVO working in st. louis. i understand the AWS issues, but i think as a lot have said, that its possible in AWS markets. im willing to try anything. internet works great here with full 3g, just no getting cricket programming when *228, and *22804 does nothing but sit and then hand up. 611 says your account can not be validated.
Related
So when you activate a new phone you have to do all the *228 stuff to register it on verizons network. Since the phone gets programmed OTA you have to be using a Verizon network. Thats where my first problem happened. Since I'm in Alaska and there are no Verizon towers (just partners) everywhere is roaming and you cannot do the OTA update/activation.
I got the phone programmed by changing the NAM settings by "calling" ##778 but only voice and sms work right now.
Now the only problem is that I don't know exactly what I need to change to get the data communications working. I know in order to use data communication on a partner network (while in roaming) you have to first use some kind of data transfer on a verizon network. I can only guess that is so the phone gets programmed properly.
If anyone would care to share their knowledge or share their Modem Settings and M.IP profile information hopefully I can get this thing working 100% again; and by not using verizon's "only" method (as the customer service says)
Call back VZW and tell them that you need to do a manual program - I used to work there and they should walk you through all of the steps/entry over the phone.
For what it's worth - Here are my settings
M.IP Settings
Number of Profiles: 1
Active User Profile Index: 0
MIP MODE: Mobile IP Preferred
MIP Registration Retries: 2
MIP Registration Retry Timeout: 0
Mobile Node-HA Authentication: Enable
Send a Registration Request: Disable
Dormant Handoff Optimization: Enable
___________________________________________
M.IP Default Profile
Enable Profile: Enable
NAI: [email protected]
DUN NAIL: Failed
MN HA SPI Set: Enable
MN HA SPI Value: 12C
MN AAA SPI Set: Enable
MN AAA SPI Value: 2
Reverse Tunneling Preferred: Enable
Home Address: 0.0.0.0
Primary HA Address: 255.255.255.255
Secondary HA Address: 255.255.255.255
DMU Public Key: 10
_____________________________________________________
Modem Settings
Slot Cycle Index: 2
Preferred Serving System: Automatic
Preferred Mode: Automatic
HDR Hybrid Preferred: Enable
Clear All MRU Entry: No
Rev A. Enable
1x Diversity: Disable
I appreciate the insight espmetalhead, however when I called vzw and asked them about manually programming it they said the only thing they can manually program is voice/sms. To program the phone for data you HAVE to be in a verizon network no matter what. I don't really understand why. I have another phone (blackberry 8330) that has working data communication here in alaska. WHy can't you just take whatever settings the blackberry has for data and use it on the incredible? lol. man, its so frustrating. I really don't want to ship my phone to my parents and walk them through programming the incredible for me haha.
espmetalhead: hopefully in your experience you've came across a way to manually program a phone for data communication...
There is a way to do it from what I remember, you just have to get to a data tech this is high enough in the chain so they can do a walk through. A csr over the phone should be able to route you to the right person. I know I did some Windows Mobile device manual programs that fired up data.
Sent from my ADR6300 using XDA App
akrutsinger said:
I appreciate the insight espmetalhead, however when I called vzw and asked them about manually programming it they said the only thing they can manually program is voice/sms. To program the phone for data you HAVE to be in a verizon network no matter what. I don't really understand why. I have another phone (blackberry 8330) that has working data communication here in alaska. WHy can't you just take whatever settings the blackberry has for data and use it on the incredible? lol. man, its so frustrating. I really don't want to ship my phone to my parents and walk them through programming the incredible for me haha.
espmetalhead: hopefully in your experience you've came across a way to manually program a phone for data communication...
Click to expand...
Click to collapse
Unfortunately, you have to be in the Vz network to program for data. They use an authentication key that can only be transmitted OTA through their own network for data services. It's a CDMA thing, so there's really no way around it.
so why isn't it possible to just read the key to me over the phone or something?
Idk, it just doesn't seem right. It seems like that has to be a way to do it manually...
Maybe I'm just in denial because I really don't want to send it back to the lower 48
Manually Programming for Data
Does anyone know how to program the Incredible to get data? For some reason after updating to 2.3.4 it just quick making calls and getting onto mobile networks. I solved the making calls issue by manually programming it through ##778. But now I'm without data, so does anyone have any ideas on how to get this accomplished? Any help would be great! Thanks!
need help for activating my phone
espmetalhead said:
Call back VZW and tell them that you need to do a manual program - I used to work there and they should walk you through all of the steps/entry over the phone.
For what it's worth - Here are my settings
M.IP Settings
Number of Profiles: 1
Active User Profile Index: 0
MIP MODE: Mobile IP Preferred
MIP Registration Retries: 2
MIP Registration Retry Timeout: 0
Mobile Node-HA Authentication: Enable
Send a Registration Request: Disable
Dormant Handoff Optimization: Enable
___________________________________________
M.IP Default Profile
Enable Profile: Enable
NAI: [email protected]
DUN NAIL: Failed
MN HA SPI Set: Enable
MN HA SPI Value: 12C
MN AAA SPI Set: Enable
MN AAA SPI Value: 2
Reverse Tunneling Preferred: Enable
Home Address: 0.0.0.0
Primary HA Address: 255.255.255.255
Secondary HA Address: 255.255.255.255
DMU Public Key: 10
_____________________________________________________
Modem Settings
Slot Cycle Index: 2
Preferred Serving System: Automatic
Preferred Mode: Automatic
HDR Hybrid Preferred: Enable
Clear All MRU Entry: No
Rev A. Enable
1x Diversity: Disable
Click to expand...
Click to collapse
hi this is Waseem from Pakistan i am facing much problems in activating my HTC droid incredible 2.
i have tried alot to update my phone but it's not working and the activation dialer is also work-less. please guide me through the whole procedure, what should i do next to activate my phone. i already have restored the factory setting twice but still not updating... i wil be very thankful to you for this act of kindness.
Ruud Westerhout said:
As a matter of interest :
1) Should I be disconnected from the net when I do this ?
2) Should I be taking the GSM-Card out of the phone when doing this
3) If I do a hard-reset now, and being asked x-cancel 0-hard-reset, what would be the result ?
4) Are there any other reasons for the device not being recognized, or not for soo long ?
PS. I am using the internet through a router/firewall and I am not using the XP-firewall.
Click to expand...
Click to collapse
This is the forums for the first gen incredible not incredible 2.
Sent from my One using Tapatalk
Hello
So I managed to get my HTC Evo on Bell, I can make calls and send text messages, however I have no data connectivity. I have been trying to search forums and read up on how to solve this but I have not been able to find a solution yet. The phone seems to be stuck on Mobile Network "Turning On" forever.
The phone is NAND unlocked and rooted I have the Home SID/NID set to 16420 and 65535 like they should be for bell. The MCC is 302 for Canada. The MNC appears to be problematic though, as bell's CDMA is on MNC 651 but I can only enter 2 characters on the EPST settings for MNC? If anyone knows the settings I need to use to get this working on Bell I would be willing to compensate them for their effort since I have an unlimited data plan with Bell right now that I am missing out on !
Thank you
I have also started getting the Data Call Failure + Voicemail errors after getting my phone on bell.
I am in the same boat, I have spent over 10hrs. working on this. The MNC is 64 {640 truncated to 64}.
If you have any more success let me know please.
The problem for me lies in the m.ip settings.
Guys did you try posting in the Evo section? there might someone who can help or you could ask the Bell CS to help you configure it,
here is some i found, let me know if its helpful, its for telus, but you could follow instructions tho
http://cytraxtech.blogspot.com/2010/10/how-to-program-your-htc-evo-to-work-on.html
hmm well i set the MNC to the correct value.... i guess the only way to fix this is to actually go to the bell store and get them to give me all the info for the network.... but that presents a problem as the evo is known as an omnia on my account ;p
maj0r_pawnage said:
hmm well i set the MNC to the correct value.... i guess the only way to fix this is to actually go to the bell store and get them to give me all the info for the network.... but that presents a problem as the evo is known as an omnia on my account ;p
Click to expand...
Click to collapse
Call them lol, tell them your phone got messed up
Wondering if you can help me out getting my evo working on telus (Talk/text). Its unlocked. Im trying to zero out MEID/ESN (which is what i was told i need to do) .. Been trying for a while and still no luck!
Im desperate .. and would really appreciate the help!
Thanks
jmathieu2 the only way you can get your phone to work... is if you already have a cdma phone from telus so that you have a meid in their database to work with. then you have to zero out your evos meid and change it to the other phones meid,
you need htc diag drivers, cdma workshop full* costs $100, qxdm, and qpst and a lot of luck : -D i can do it for you if you live in the toronto or kingston area
fusion600 said:
I am in the same boat, I have spent over 10hrs. working on this. The MNC is 64 {640 truncated to 64}.
If you have any more success let me know please.
The problem for me lies in the m.ip settings.
Click to expand...
Click to collapse
The MNC 640 is
640 Bell Bell Mobility Operational UMTS 850 / UMTS 1900
651 Bell Bell Mobility Operational CDMA 800 / CDMA 1900
this is what we need for the evo so how do we enter 651 when we only have 2 characters space!
Here's my update
Using ##debug
under EVDO Engineering I have AN/AAA Authenticated, however, I have no IP
Getting Error 67 pretty regularly
I know the profiles are setup differently when comparing under QPST, on the EVO verses the TP2 for instance. The EVO seems to require using Profile 1 as the default, whereas the TP2 uses Profile 2.
I need to understand the mapping to the different profiles and how Bell uses them.. Bell uses MIP.1x.bell.ca and Services.1x.Bell.ca.
I assume MIP would be used to acquire the IP, based on the name, but I am having no luck at this. been a while now. frustrated doesn't begin to describe it.
I know someone who was succesful on telus, using 220 (22) for the MNC, and since it works for him I am going to use 640 (64) which is the same UMTS 850 / UMTS 1900, I know the phone is an 800/1900, but.....
I updated my build.prop as outlined on Program Evo for Telus
Anyone else have any luck on Bell, or have any insights on my questions?
Thanks for the reply. However I am not in the area About 8-9 hours north.
I do have a telus cdma phone currently (Blackberry curve 8330)
I have all the tools except I am not using the full version of cdma workshop.
I have already zero'ed our 9 MEID numbers and then re scanned the memory but not finding anything. I'm wondering If i might be scanning the wrong memory locations?!
evo has 2 readable ranges
0x00fa0000 - 00ff0000 ( 500000 bytes)
0x01080000 - 0x01D70000 ( 13500000 bytes)
Are the locations im scanning in CDMA ws under memory tab - Memory / Eeprom section. Then I open the output .bin file and search for my MEID number .. etc!
My phone is baseband 2.15.00.09.01 / Hardware version 0004
If you could PM me or give me some tips for scanning memory to find the MEID/ESN's to zero that would be great.
there are more ranges if you have 2.2
only thing i can really say is you just go into qxdm and 0 out the meid and reboot the phone and if its all 0 then you did it right... some of them are hard to see when trying to 0 it out make sure you didnt miss anything
I think its my scans in cdma ws that are incorrect.
I scanned memory location 00F9:8000 and 0107:C000 and found most MEID there and used 2 addresses i found online and found 2 more ..
Just not sure where to scan in cdma ws to find more.
fusion600 said:
under EVDO Engineering I have AN/AAA Authenticated, however, I have no IP
Click to expand...
Click to collapse
Was there anything special you did you get it to get authenticated?
Am working on a Hero, but don't think it should make a difference. I've re-checked all the passwords, just can't seem to figure out why it won't connect.
What carrier are you with?
Also Bell. The only thing I see is the PRI is different, and did not know how/if to change it.
I have never gotten ANY data connection.
If you have 1x, can you please tell me your setup. I believe my problem is in the profiles in QPST. Not sure when to use services.1x.bell.ca, when to use 3g.1x.bell.ca etc. Also, what is your Donor phone? Mine is an HTC Touch, so ESN only, no MEID.
as far as PRL, I am using 31402
Fusion600,
I am researching this before I buy an EVO. I won't bother if I can't get a data connection.
I have my HTC touch 6900 running Android 2.2 It is using MCC/MNC of 310620 and I get data, so i don't think it really matters as long as the ESN is registered with Bell.
Have you made any further progress getting data working? Anyone risk calling Bell? or having them refresh your programming?
I have asked a few bell kiosk and have called in for help. There employees all seem to want to help but dont seem to know how to. I have now managed to get txt and calls to work from doing a little research. I will ask again and see if they can help now with providing some details about setting up data connections. will post if success.
any progess on this?? any one?? msg here or pm me thanks im tying to figure out the data stuff as well for bell
Sorry to bump an old thread, but any news on this? I have an Evo 3D from Rogers and want to bring it to Bell/Virgin mobile. I unlocked it for 8$ from a website for sim unlocking. I get calls and txts but same thing as you guys, no data >.<
Hello, I am on pay as you go on EE and on Dolphin. I topped up £15 and it gave me 2gb data and 600 free texts for a month. One, I don't know how I'm gonna kill all of that!? Two it won't work. That was on my RandomROM Sense 4.1 version (USB Works BTW LEGIT I have my dhd) and it said
"Disconnected because service is unavailable". So looking here http://community.ee.co.uk/t5/produc...C-One-SV-and-TMobile-internet-data/td-p/37002 it says known problem about One SV (Which RandomROM is partly based upon) and it tells me to create a new APN.
Name = Internet
APN = everywhere (case sensitive)
Proxy = Leave Blank
Port = Leave Blank
Username = eesecure
Password = secure
Server = Leave Blank
MMSC = Leave Blank
MMS proxy = Leave Blank
MMS port = Leave Blank
MCC = 234
MNC = 30
Authentication type = PAP
APN type = default
APN protocol = IPv4
Bearer = Unspecified
Also APN protocol and Bearer don't seem to appear and when I save this configuration it doesn't save, all there is is the defaults that don't work.
Now I am trying it on TakTik 4.4. I edit the default EE Internet to MNC=30 and it randomly disappears from the list. Can anyone help me? (My Desire HD was previously carrier locked on Orange before I S-OFFed )
PS I want to stay on RandomROM (For development reasons)
anybody???
Have you tried any thing
Sent from my Sensation XL using Tapatalk
No thread bumping every few hours please !!!
Dr. Globbyglob said:
anybody???
Click to expand...
Click to collapse
just be a little more patient , bumping a thread every few hours doesn't help you a lot.
ceesheim said:
just be a little more patient , bumping a thread every few hours doesn't help you a lot.
Click to expand...
Click to collapse
Okay im a bit worried
When i try to change the mnc to 30 (by default it says 33) the saved apn disappears
At the beach today and was getting 3g to 4g showing on my phone (stock not rooted). Mail, chrome, maps and other programs were not connecting. I set up my tether to my tablet and it was able to use the data to connect with things just fine. Normally I have no problem with cell data. I assume the signal was not as strong as usual at the beach but it did show 4g and 3g and I would have thought if my tablet was able to receive the tether and load data fine the phone should have.
Anyone have any thoughts on this?
GTT1 said:
At the beach today and was getting 3g to 4g showing on my phone (stock not rooted). Mail, chrome, maps and other programs were not connecting. I set up my tether to my tablet and it was able to use the data to connect with things just fine. Normally I have no problem with cell data. I assume the signal was not as strong as usual at the beach but it did show 4g and 3g and I would have thought if my tablet was able to receive the tether and load data fine the phone should have.
Anyone have any thoughts on this?
Click to expand...
Click to collapse
APN settings alroght?
ZenFoneFan said:
APN settings alroght?
Click to expand...
Click to collapse
I think they look okay. I am on T-Mobile and under apn I have T-mobile US LTE fast t-mobile.com
Brand New unrooted/stock on AT&T
ZenFoneFan said:
APN settings alroght?
Click to expand...
Click to collapse
I am having similar problems on my new zenphone2
AT&T Network, settings as follows:
per AT&T's documentation:
access point name: ATT Phone
APN: phone
proxy/port/username/password/server: not set
MMS port: 80
MCC port: 310
MNC port: 410
authententication type: Not set
APN Type: default,mms,supl,hipri
APN protocol : IPv4
APM roaming protocol: IPV4/IPV6
APM enable/disable: APN enabled
Bearer: Unspecified
MNVO type: NONE
MNVO value: not set
Now if I go into about/status, I see
Cell network type hspa (ugg...) Signal strength 83db
service state: voice: in service/Data in service
Roaming: Not roaming
Cellular network state: Disconnected:
Now if I were a betting man, I'd say the VERY last line is my problem.
But HOW the FRECK do you get it on?
hate calling the tech support (jerk support line?) (I can say that as I did it for a number of years!)
oh oh, just re boooted phone, and now cell network state says :CONNECTING..
This could be good, but will keep here as a answer to others, I hope!!!
Nope, went from Connecting to DISCONNECTED again
So original question persists!
(wifi on, phone fine, wifi off, no data...ie, cell data not working)
OK. so far , update from original post.
************it Seems that despite my telling the associate at the AT&T store I had a grandfathered, unlimited data plan.
AND that yesterday's chat with billing), My plan was re-configured to be a "no data plan, pay as you go" device *****
The nice person at the tech support hotline escalated the problem to tier 2, and also gave me a TICKET #. (YES, you ALWAYS need a ticket number at ANY carrier when you have problems like this!)
She also gave me a 3gb plan for today/tomorrow, and told me that tier 2 would be able to re-establish my grandfathered plan.
I also told her that this happened WITHOUT MY CONSENT, WITHOUT MY SIGNATURE, and that this could become an FCC complaint (they HATE those!) as well as the automatic termination of my 2 year contract from my side.
SO, we will see, and I will update later in the week.
but I currently have data now, that 'connecting... was the key message'
Hi,
I'm trying to flash back two E4GT phones from PagePlus to Sprint (RingPlus MVNO). I get calls and text but no data. I suspect the mobile IP (M.IP) address maybe wrong. I'm hoping someone with more knowledge can help me out. I keep getting error 67. If anyone has QPST and can confirm their settings it would be much appreciated. Here are my current settings:
Settings tab- Service programming/field service/one time subsidy lock (uses 1) are all the MSL on the account. General = slot cycle 2, Current NAM=Nam1, Auto Nam = unchecked, SPC change enabled = checked.
CDMA tab- Nam Name = "SPCS", Directory = R+ phone number(10 digits no space/no dash), AOC=6, MCC=310, MNC = 10, IMSI_S = MSID (10 digits), Primary Channel A/B=283/384, Secondary Channel A/B=691/777, EVRC enabled for Home Page/Home Orig/Roam orig. Question here, I certain all is correct except for MNC. I've read 10, 12 and 120. QPST will only accept a 2 digit code for this field. Does it matter as it seems to work with both 10, 12 and even 00 (just not with 120).
CDMA-2 tab - NAM name = SPCS, Directory = R+ (10 digit number), True IMSI with MCC=310, MNC=12 and IMSI_S=MSID (10 digit)....Identical to first CDMA tab.
System tab - SID=4162, NID=65535, preferred mode = CDMA only, Band and Roam preference = Automatic
Roam tab- I loaded PRL 60690
Data tab- MDR mode = Svc Opt 33 pfrd, Pkt Dial String #777, Service option=IS-707
M.ip tab -
profile 0 (available = 0 and 1), NAI = R+ 10 digit [email protected], HA shared secret = text string "secret", AAA key=unknown what this value is and read that it's provided OTA at time of programming, Rev Tunnel Preferred=enabled, Home Address=0.0.0.0, Primary HA address = 68.28.81.76, Secondary HA address = 68.28.89.76, MN-HA SPI=4D2, MN-AAA SPI=4D2, DMU public key ID=0, DMU Mobile Authenticator=blank
Profile 1- Everything exactly the same as profile 0 with the only exception of Primary HA address = 255.255.255.255
Thanks in advance.
I used MVNOslayer to configure my phone to ringplus.
I am dealing with the same mip error 67. I kinda expect it since its a old phone that got replaced , i got two prevails now to flash,mod en xposed , and maybe decompile my odexed phones framework, Eventually ill look on my good rom but if ne thing I mod on dummy prevail to fix this I will surely let you kno bud or send file/link after i check on primary cell to ya since im on boost/sprint