Develop Bugs

Manually Programming HTC Incredible For Verizon Networks

So when you activate a new phone you have to do all the *228 stuff to register it on verizons network. Since the phone gets programmed OTA you have to be using a Verizon network. Thats where my first problem happened. Since I'm in Alaska and there are no Verizon towers (just partners) everywhere is roaming and you cannot do the OTA update/activation.
I got the phone programmed by changing the NAM settings by "calling" ##778 but only voice and sms work right now.
Now the only problem is that I don't know exactly what I need to change to get the data communications working. I know in order to use data communication on a partner network (while in roaming) you have to first use some kind of data transfer on a verizon network. I can only guess that is so the phone gets programmed properly.
If anyone would care to share their knowledge or share their Modem Settings and M.IP profile information hopefully I can get this thing working 100% again; and by not using verizon's "only" method (as the customer service says)

Call back VZW and tell them that you need to do a manual program - I used to work there and they should walk you through all of the steps/entry over the phone.
For what it's worth - Here are my settings
M.IP Settings
Number of Profiles: 1
Active User Profile Index: 0
MIP MODE: Mobile IP Preferred
MIP Registration Retries: 2
MIP Registration Retry Timeout: 0
Mobile Node-HA Authentication: Enable
Send a Registration Request: Disable
Dormant Handoff Optimization: Enable
___________________________________________
M.IP Default Profile
Enable Profile: Enable
NAI: [email protected]
DUN NAIL: Failed
MN HA SPI Set: Enable
MN HA SPI Value: 12C
MN AAA SPI Set: Enable
MN AAA SPI Value: 2
Reverse Tunneling Preferred: Enable
Home Address: 0.0.0.0
Primary HA Address: 255.255.255.255
Secondary HA Address: 255.255.255.255
DMU Public Key: 10
_____________________________________________________
Modem Settings
Slot Cycle Index: 2
Preferred Serving System: Automatic
Preferred Mode: Automatic
HDR Hybrid Preferred: Enable
Clear All MRU Entry: No
Rev A. Enable
1x Diversity: Disable

I appreciate the insight espmetalhead, however when I called vzw and asked them about manually programming it they said the only thing they can manually program is voice/sms. To program the phone for data you HAVE to be in a verizon network no matter what. I don't really understand why. I have another phone (blackberry 8330) that has working data communication here in alaska. WHy can't you just take whatever settings the blackberry has for data and use it on the incredible? lol. man, its so frustrating. I really don't want to ship my phone to my parents and walk them through programming the incredible for me haha.
espmetalhead: hopefully in your experience you've came across a way to manually program a phone for data communication...

There is a way to do it from what I remember, you just have to get to a data tech this is high enough in the chain so they can do a walk through. A csr over the phone should be able to route you to the right person. I know I did some Windows Mobile device manual programs that fired up data.
Sent from my ADR6300 using XDA App

akrutsinger said:
I appreciate the insight espmetalhead, however when I called vzw and asked them about manually programming it they said the only thing they can manually program is voice/sms. To program the phone for data you HAVE to be in a verizon network no matter what. I don't really understand why. I have another phone (blackberry 8330) that has working data communication here in alaska. WHy can't you just take whatever settings the blackberry has for data and use it on the incredible? lol. man, its so frustrating. I really don't want to ship my phone to my parents and walk them through programming the incredible for me haha.
espmetalhead: hopefully in your experience you've came across a way to manually program a phone for data communication...
Click to expand...
Click to collapse
Unfortunately, you have to be in the Vz network to program for data. They use an authentication key that can only be transmitted OTA through their own network for data services. It's a CDMA thing, so there's really no way around it.

so why isn't it possible to just read the key to me over the phone or something?
Idk, it just doesn't seem right. It seems like that has to be a way to do it manually...
Maybe I'm just in denial because I really don't want to send it back to the lower 48

Manually Programming for Data
Does anyone know how to program the Incredible to get data? For some reason after updating to 2.3.4 it just quick making calls and getting onto mobile networks. I solved the making calls issue by manually programming it through ##778. But now I'm without data, so does anyone have any ideas on how to get this accomplished? Any help would be great! Thanks!

need help for activating my phone
espmetalhead said:
Call back VZW and tell them that you need to do a manual program - I used to work there and they should walk you through all of the steps/entry over the phone.
For what it's worth - Here are my settings
M.IP Settings
Number of Profiles: 1
Active User Profile Index: 0
MIP MODE: Mobile IP Preferred
MIP Registration Retries: 2
MIP Registration Retry Timeout: 0
Mobile Node-HA Authentication: Enable
Send a Registration Request: Disable
Dormant Handoff Optimization: Enable
___________________________________________
M.IP Default Profile
Enable Profile: Enable
NAI: [email protected]
DUN NAIL: Failed
MN HA SPI Set: Enable
MN HA SPI Value: 12C
MN AAA SPI Set: Enable
MN AAA SPI Value: 2
Reverse Tunneling Preferred: Enable
Home Address: 0.0.0.0
Primary HA Address: 255.255.255.255
Secondary HA Address: 255.255.255.255
DMU Public Key: 10
_____________________________________________________
Modem Settings
Slot Cycle Index: 2
Preferred Serving System: Automatic
Preferred Mode: Automatic
HDR Hybrid Preferred: Enable
Clear All MRU Entry: No
Rev A. Enable
1x Diversity: Disable
Click to expand...
Click to collapse
hi this is Waseem from Pakistan i am facing much problems in activating my HTC droid incredible 2.
i have tried alot to update my phone but it's not working and the activation dialer is also work-less. please guide me through the whole procedure, what should i do next to activate my phone. i already have restored the factory setting twice but still not updating... i wil be very thankful to you for this act of kindness.

Ruud Westerhout said:
As a matter of interest :
1) Should I be disconnected from the net when I do this ?
2) Should I be taking the GSM-Card out of the phone when doing this
3) If I do a hard-reset now, and being asked x-cancel 0-hard-reset, what would be the result ?
4) Are there any other reasons for the device not being recognized, or not for soo long ?
PS. I am using the internet through a router/firewall and I am not using the XP-firewall.
Click to expand...
Click to collapse
This is the forums for the first gen incredible not incredible 2.
Sent from my One using Tapatalk

[Q] Getting Cricket Data to work on Triband Network

So I've read all of the claims that the EVO simply won't work if you're in an AWS market. Fine, no problem. Somehow i've managed to get it to work for me though! Well, talk and text on the android plan anyway. I still can't seem to get data working though :/ I was wondering if anyone could help me with this.
I started out with myn-WarmTwoPointTwo--RLS-4-Cricket-Zmod played around with settings for about 4 days and finally managed to get talk and text working. However, my "4G" radio would only take me to a webpage that asks me to sign up for clear internet service when I opened the web browser(Hmm i wonder what would happen if i signed in with my clear account, I'll try that in a moment).
Someone mentioned I go for JimminyV's cricket ROM. So i gave that a try and there didn't seem to be any difference at all, but i couldn't get a mobile network connection, so i'm thinking this ROM won't do the trick for me, I went back to twoPointTwo.
I've taken bits from all kinds of tutorials, including JImminyV's ROM post:
http://forum.xda-developers.com/showthread.php?t=784776
The Zmods:
http://forum.xda-developers.com/showthread.php?t=795126
EPST programming codes:
http://forum.xda-developers.com/showthread.php?t=737594
some post ztahoez made over at CDMAGurus.com etc.
Played around with ##Data#(I should give you my settings in there):
Data Profile:
Active Profile = 1
User Name = my#@mycricket.com
SPI MN-HA = 12C
SPI MN-AAA = 2
Reverse Tunnel Preferred = Enable
Home IP = 0.0.0.0
Primary Home Agen = 68.28.15.12
Second Home Agent = 68.28.31.12
HA and AAA shared secret = cricket
DSA Server URL = (couldn't find any info on this so i just wrote https://dsa.mycricket.com) any bells ringing?
EVDO:
DDTM = Enable
Preferred Mode = Auto
Advanced:
MEID = a hex value that can't be edited and i'm not sure if it's safe to share
P_REV = IS-2000(6)
SCM = 58
Slot Mode = Enable
Slot Cycle Index = 1
MMC = 310 - I'm in the US
MNC = 00
MSID = 4433070623 - anyone familiar with that MSID?
ACCOLC = 3
Vocoder = Enable
EVRC-B = Disable
Home and Roam ORig = Voice 13k
LBS PDE IP and Port = unavailable - what is that?
Foreign NID and SID registration = Enabled
DDTM = Enable
Home SID/NID #1 = 6535/65535 - I can't find info for this anywhere
MMS Server URL = http://mms.mycricket.com/mycricket/mms.php
RTSP Proxy Port = 554
RTSP Proxy Address = 0.0.0.0
HTTP PD Proxy Port = 8085
HTTP PD Proxy Address = 0.0.0.0
WiMAX:
Standby Time(minute) = 10
SCAN RATE = 30
NAI = [email protected]
User Name = my#@mycricket.com
Realm = mycricket.com?
a whole bunch of craziness
TLS = enabled
TTLS = disabled
My PRL is 06399
Hmm after messing around with JimminyV's ROM, I can't seem to connect to clear's sign in prompt anymore :/
Other Common problems:
I keep getting error code 65, which with a little googling, means that there's an authentication issue, somewhere :/
[EDIT] I forgot to mention that ##778# and *228 don't work, and if i use *22804, I'll usually connect to Verizon Wireless' configuration menu [/EDIT]
I've tried to be as thorough as i could be. Please let me know if you have any questions for me and if you can help, THANKS!!!

I guess I can post this over at CDMAgurus too, but just wanted you to know, that i was able to log into clear with my account lol(i'd better check if i've been charged, or the lol will be on me.

Hey here, yes here, this is why:....
HEY HERE, YES HERE, THIS IS WHY:....
The reason as to why you only get talk/text on cricket with a dual band phone on a tri-band area/AWS is the following:
Your plan has a national access/roaming (talk/text), meaning that everywhere you go, you will be able to get AT LEAST talk and text. On the regular cricket network, you get EVERYTHING.
Your phone is actually connected to sprints tower because sprint is the roaming partner with cricket. the agreement DOES NOT allows data usage, only talk/text ( i will assume because talk/text does not takes as much bandwidth as data does)
So, to sum-up:
ANY DUAL-BAND PHONE on a AWS market will be on a "Roaming Partner Network"
This is because you are using SPRINTS network (or any other romaing partner network), and the agreement only lets you use talk/text.
HOWEVER, if you take your phone where cricket offers a native DUAL BAND (800/1900) frequency, you will have data working.

Numerous people are sadly mistaken when it comes they're understanding of the Cricket EVO's functionality in triband areas. They have been lead to believe that it's impossible to get it to work or to get all of its features working, but this is about as far from the truth as it gets. People are quick to rely on information which they haven't actually tested themselves. They're like the folks in Columbus's day who didn't believe that the earth is round, but here are the facts...I live in Chicago, which is a triband area, and have been using a fully flashed Cricket EVO for quite some time now with out a single problem whatsoever. Everyone one of my features work perfectly fine, and my network is NOT roaming. Looks like Cricket EVOs work in triband areas afterall!

yeah you're not the first person to say that, but no one's been able to prove it. or show how to do it.

Laserbeak43 said:
yeah you're not the first person to say that, but no one's been able to prove it. or show how to do it.
Click to expand...
Click to collapse
I've been using the proof for a couple of months now & as far as how to do it is concerned, it's posted all over this website & others.

RioSoul said:
I've been using the proof for a couple of months now & as far as how to do it is concerned, it's posted all over this website & others.
Click to expand...
Click to collapse
Last i checked(for weeks) It couldn't be done on cricket. I've had voice but had to use clear for data.

so yyeah i've searched all EVO forums for Cricket and Triband and there's no thread that posts a solution, there are only 3 threads as a matter of fact.
So which thread were you talking about?

bumping this one, willing to donate to a dev of your choice if someone can help me get this EVO working in st. louis. i understand the AWS issues, but i think as a lot have said, that its possible in AWS markets. im willing to try anything. internet works great here with full 3g, just no getting cricket programming when *228, and *22804 does nothing but sit and then hand up. 611 says your account can not be validated.

[Q] Epic 4g from sprint to verizon

i flashed a sprint galaxy s2 to verizon prepaid. i wrote nv items,prl files, mobile profile 0. im still wondering why only verizon 3g is working. i can not make calls or anything else.

carshass said:
removed
Click to expand...
Click to collapse
I think this is illegal after recent law changes/new laws.
Sent from my SPH-D710 using xda app-developers app

If I am not mistaken, the laws only apply to GSM devices.
Sent from my SPH-D710 using xda app-developers app

Also, only phones purchased on or after the effective date of the new law.

If you can get the E4GT fully working on Verizon let me know. I have Verizon now and I miss using my E4GT.
Sent from my SPH-D710 using xda premium

I've gotten the E4GT working on VZW. I have to find the guide I wrote for myself and I'll share.
Sent from my Galaxy Nexus using xda app-developers app
EDIT: here you guys go.
I'm going to assume you have experience with manually provisioning a CDMA device onto a different network.
The phone I used at the time was a Samsung Fascinate.
As long as your VZW donor phone will give up the CAVE and pretty much all the info needed in this post easily, you should have no problem getting talk, text, and data working on VZW.
Code:
e4gt password = 01F2030F5F678FF9
QPST Section:
Copy all the info from your donor phone into the sections labeled INFO_HERE
CDMA TAB
NAM1: Name = Empty
Directory # = INFO_HERE
AOC = 2
CDMA: MCC = 310
11_12 = 00
IMSI_S = INFO_HERE
Channel A Primary B
283 384
A secondary B
691 777
CDMA-2 TAB
MCC = 000
11_12 = 00
IMSI_S = INFO_HERE
AMPS: Phone Number = INFO_HERE
Home SID 2004
M.IP: prof 0
enabled = yes
nai = [email protected]
tethered nai = [email protected]
MN-HA SPI = 12C
DMU Public Key ID = 10
MN-AAA SPI 2
Primary HA Address = 255.255.255.255
Secondary HA Address = ^^^^^^^^^^^^^
RFC2002bis MN-HA authenticator calculation CHECKED - DATA WILL FAIL IF UNCHECKED
Use QXDM to dump your HA/AAA shared secrets
ha = INFO_HERE
aaa = INFO_HERE
Use CDMA WS to get AKEY/CAVE info
AKEY: INFO_HERE
SSD_A: INFO_HERE
SSD_B: INFO_HERE
You can also use CDMA WS to do the ESN/MEID switcheroo from the donor phone.
Or you can use DFS to do it later while you're doing the PPP configs.
Use DFS to program PPP - It's easier than having 2 or 3 different version of QPST
PAP:
UID = NAI
Pwd = AAA key - NEEDS TO BE IN HEX
PPP:
SIP NAI = tethered nai
UID = nai
Pwd = AAA key - NEEDS TO BE IN HEX
HDR AN:
NAI = NAI
Pwd = AAA key - NEEDS TO BE IN HEX
HDR AN Long
UID = NAI
Pwd = AAA key - NEEDS TO BE IN HEX
HDR AN PPP
UID = NAI
Pwd = AAA key - NEEDS TO BE IN HEX
check Authentification require password encryption
PPP Config
Um: User ID = [email protected]
Tethered NAI = [email protected]
AN: User ID = [email protected]
ESN INFO_HERE
MEID INFO_HERE
AKEY = INFO_HERE
SSD_A = INFO_HERE
SSD_B = INFO_HERE
original E4GT MSL = INFO_HERE - Don't forget to change the MSL/SPC to 000000 to make your life easier.
Oh and flash the Verizon PRL too.
^^^^^^^^ click me

Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

[Q] DDTM = OFF setting Will. Not. Stick. - missing calls

Yes, I have searched this forum and other sites. Yes, I have the MSL.
It’s pretty clear why my inbound calls roll directly to voicemail when the device is active in 3G data – the DDTM setting. My problem is confounding: I cannot get the DDTM parameter to stick to OFF.
DDTM can be found in the EPST menu with ##3282# … Edit … MSL … EVDO … DDTM = OFF. DDTM can also be found in Settings … Call Settings … DDTM un-checked. Yet no combination allows calls to pre-empt data! I go back into ##3282# ... it has reverted to ON.
Everything besides this is working fine on my Sprint GS2.
No WiMax 4G in my area, so that radio is turned off.
Running Android 4.0.4 Stock rooted, baseband FI25 kernel 3.0.15-1123725 [email protected] #3
Please help. Thanks!
EDIT: With help from this thread http://forum.xda-developers.com/showthread.php?t=1954029
I've managed to pull current DDTM settings via QXDM.
My Current Settings:
Code:
requestNVItemRead ddtm_settings
DIAG RX item:
nv_ddtm_settings.ddtm_pref = DDTM_PREF_OFF
nv_ddtm_settings.ddtm_act = DDTM_ACT_MASK_ALL
nv_ddtm_settings.num_srv_opt = 2
nv_ddtm_settings.srv_opt_list[0] = 65535
nv_ddtm_settings.srv_opt_list[1] = 256
Perhaps can someone else check these values against their working device?

[help] ee data on dhd (urgent)

Hello, I am on pay as you go on EE and on Dolphin. I topped up £15 and it gave me 2gb data and 600 free texts for a month. One, I don't know how I'm gonna kill all of that!? Two it won't work. That was on my RandomROM Sense 4.1 version (USB Works BTW LEGIT I have my dhd) and it said
"Disconnected because service is unavailable". So looking here http://community.ee.co.uk/t5/produc...C-One-SV-and-TMobile-internet-data/td-p/37002 it says known problem about One SV (Which RandomROM is partly based upon) and it tells me to create a new APN.
Name = Internet
APN = everywhere (case sensitive)
Proxy = Leave Blank
Port = Leave Blank
Username = eesecure
Password = secure
Server = Leave Blank
MMSC = Leave Blank
MMS proxy = Leave Blank
MMS port = Leave Blank
MCC = 234
MNC = 30
Authentication type = PAP
APN type = default
APN protocol = IPv4
Bearer = Unspecified
Also APN protocol and Bearer don't seem to appear and when I save this configuration it doesn't save, all there is is the defaults that don't work.
Now I am trying it on TakTik 4.4. I edit the default EE Internet to MNC=30 and it randomly disappears from the list. Can anyone help me? (My Desire HD was previously carrier locked on Orange before I S-OFFed )

PS I want to stay on RandomROM (For development reasons)

anybody???

Have you tried any thing
Sent from my Sensation XL using Tapatalk

No thread bumping every few hours please !!!
Dr. Globbyglob said:
anybody???
Click to expand...
Click to collapse
just be a little more patient , bumping a thread every few hours doesn't help you a lot.

ceesheim said:
just be a little more patient , bumping a thread every few hours doesn't help you a lot.
Click to expand...
Click to collapse
Okay im a bit worried

When i try to change the mnc to 30 (by default it says 33) the saved apn disappears