USB tethering on all rom's I've tested doesn't work. windows says there's an issue with the ndis internet sharing driver. I tried Samsung driver and windows there appears to be no issues yet it doesn't work.
I even tried on my atrix cm9 neutrino rom and no go like the network adapter detects on my fresh windows 7 x64 and no go... why?
Cleanrom, recommend this for its low power drain and speed. Tether is working well, even got wallet to work. Wallet took a few hacks
1chris89 said:
USB tethering on all rom's I've tested doesn't work. windows says there's an issue with the ndis internet sharing driver. I tried Samsung driver and windows there appears to be no issues yet it doesn't work.
I even tried on my atrix cm9 neutrino rom and no go like the network adapter detects on my fresh windows 7 x64 and no go... why?
Click to expand...
Click to collapse
I'm not sure if the rom is the problem.
I was having a tethering problem and I changed my kernel and now it works great.
Current Devices: At&t Samsung Galaxy Note, Verizon Samsung Galaxy Nexus, Asus Google Nexus 7 Super Tablet
Current Roms: Jedi XP 9 (Note 2), AOKP (Galaxy Nexus), Nexus 7 Stock
Yeah it doesn't work on my atrix or note 2 and I have yet to have anyone confirm what exact combination of rom/ kernel I need to get it to work I tried cleanrom after wiping everything it just sits at the x screen forever never boots into the android is. So right now im on jelly beer 3.35.1 and no go... Can anyone confirm how they got it working on the note 2? Wish it would work on my atrix as well running the 1.4ghz cm9 kernel on it
1chris89 said:
Yeah it doesn't work on my atrix or note 2 and I have yet to have anyone confirm what exact combination of rom/ kernel I need to get it to work I tried cleanrom after wiping everything it just sits at the x screen forever never boots into the android is. So right now im on jelly beer 3.35.1 and no go... Can anyone confirm how they got it working on the note 2? Wish it would work on my atrix as well running the 1.4ghz cm9 kernel on it
Click to expand...
Click to collapse
I'm using perusus I think I spelled it right..
Works fine for that kernel.
It didn't work with saber kernal
Current Devices: At&t Samsung Galaxy Note, Verizon Samsung Galaxy Nexus, Asus Google Nexus 7 Super Tablet
Current Roms: Jedi XP 9 (Note 2), AOKP (Galaxy Nexus), Nexus 7 Stock
Thanks man but I'm on jellybeer 3.55.3 on stock kernel and no go are there any other cm10 kernels other than stock available?
What rom are u running? Exactly
Thanks
Try wifi tethering? I know it's not as fast as usb (or at least I would imagine), but it's better than nothing. I can confirm that wifi tethering works on jellybam and PA, which are both a CM 10 variant.
Sent from my GT-N7105 using xda premium
I have no data so need USB tethering to work by directing phone WiFi traffic to pc using USB tethering...
I installee noteorious prime rc 1.5 and installed perseus kernel and it still doesn't work. I saw ppl do it in android on youtube without an issue. 8ts not redirecting wifi traffic to usb tethering correctly... any help? I enabled degub mode too
Related
Wtf? This started happening last night.. When ever the screen goes off, or if i press the power button to turn off screen /block phone, the wifi turns off :S
Im on francos kernel and his app updated last night.. Dunno if that is causing the issue
Sent from my Galaxy Nexus using xda premium
I'm experiencing the same issues along with random 3g/h data loss's as well. I'm using faux's 17m kernel. I also upgraded to B36 and did a full wipe and am still experiencing these issues.
I have a wifi problem as well, but mine is that it won't connect. It turns on and all, but just doesn't connect to my router. Laptop and PS3 connect fine, but nothing to my Gnex. However, it was working fine this morning, last time it did was at 8 am. Any ideas?
Sent from my Galaxy Nexus running AOKP+Franco from Tapatalk 2
Bad idea to bump this old thread lol.. I figured that i can not use wifi keep alive app and turn on the keep wifi on native policy at the same time.. Is you do so.. The wifi goes crazy..
As for your issues try flashing a different kernel?
Galaxy Nexus AOKP m5 Franco kernel m3
I've now tried several kernels (Faux, Morfic, Popcorn, Stock) and no matter what wifi won't connect. I have two routers in my house, one is a wireless N and one is a G. My Gnex won't even recognize the N router...
As much as I LOVE AOKP i've gotta to to CM9 until this is fixed.
[email protected] said:
I've now tried several kernels (Faux, Morfic, Popcorn, Stock) and no matter what wifi won't connect. I have two routers in my house, one is a wireless N and one is a G. My Gnex won't even recognize the N router...
As much as I LOVE AOKP i've gotta to to CM9 until this is fixed.
Click to expand...
Click to collapse
Do you have security on your routers? If so, read the thread I started about it.
http://forum.xda-developers.com/showthread.php?t=1656102
Sent from my Galaxy Nexus running AOKP+Franco on Tapatalk 2
[email protected] said:
I've now tried several kernels (Faux, Morfic, Popcorn, Stock) and no matter what wifi won't connect. I have two routers in my house, one is a wireless N and one is a G. My Gnex won't even recognize the N router...
As much as I LOVE AOKP i've gotta to to CM9 until this is fixed.
Click to expand...
Click to collapse
Does it works on cm9? I got no issues at all with wifi... My router its a linksys with wddrt fimware with security and everything works good
Galaxy Nexus AOKP m5 Franco kernel m3
I have tried several versions and I cannot get my galaxy tab to find the network. My wifes WT is working fine on my old Evo, version 2.0.7.
For some reason all versions are making me choose a 14 letter ASCII password but the wt on the Evo doesn't have this requirement, I think it only requires 8 characters.
Any ideas on what can be causing this? I am on the GB Blazer rom with no mods.
Thanks
Try changing your mode to Galaxy Nexus GSM and see if that works
Just started...on laptop and noticed wasn't connected...tether shut itself off. When I restart it says tether enabled...then immediately shuts itself off again. Reboot to no avail. Any ideas?
Sent from my Galaxy Nexus using Tapatalk 2
Verizon btw...cm9 rc1
Sent from my Galaxy Nexus using Tapatalk 2
did you have jelly bean rom installed before?
if you did, did you install a wifi tether patch?
because i have almost the same problem with toro CM 10, i could connect. but with no internet access.
i install CM10 nightly with a clean install. i still get the same problem.
i hope someone can help.
I have a similar issue when I went to 4.2.2, as I remember it working with 4.1.2. The client can see and connect to the AP, but no internet access.
I flashed many different ROM combinations, and kernels to no avail. It seems that when I went to 4.2.2, my provider has stopped allowing for wifi tethering work on my GN.
As a test, I switched SIM with a friend, and his SIM allowed for tethering to work on my phone. The tethering on my phone works but the carrier that I was using just blocked it.
This could be the same with your case?
I was also playing around with the WiFi tether Treve mod apk, but that didn't work either for me. It worked for some folks, and not for others.
I installed WiFi Tether for root users on my rooted Sprint SGS3. Based on what I read online I set the device profile to Galaxy Nexus (CDMA/LTE).
I was able to connect to it from my laptop the first time and it worked. I tried to use it a few days later with my Transformer Prime tablet and it was unable to see the network broadcast from my phone. After many attempts at stopping and starting it and restarting WiFi on the tablet it eventually got connected.
Since then I have not been able to get any device to see the network created by WiFi Tether (3.2-beta2). I tried changing various settings (device profile, SSID, channel, enable routing fix option) and nothing got it to show up. Can someone tell me what I am doing wrong?
Phone:
Samsung Galaxy S3 for Sprint (rooted and stock rom)
Baseband L710VPLG8
Kernel 3.0.8-906128-user
Build IMM76D-L710PALG8
Hardware version: L710.14
Tablet:
Asus Transformer Prime with stock software up to date.
Laptop is a HP Windows 7 laptop with an Intel branded a/b/g wireless adapter built in.
I am able to make this version work but I selected the Samsung Galaxy S3 profile.
That is one of the device profiles I tried without success. I have read that others had similar problems but they were resolved by using the Nexus CDMA/LTE profile.
Is there another app or version of WiFi tether that works more reliably on this phone? Does this feature work reliably using a particular custom ROM?
I used the Nexus CDMA/LTE profile on an earlier version of this app (before they had a profile for the S3) and it worked, but not always. I have not had a problem with this version (3.2 beta2) with the S3 profile. I am using this on the Rooted stock LI3. I have heard that there are other apps but I have not tried them.
I used Triangle Away to reset the counter and the issue was minimized(less start and stops) to make it broadcast.
It shows like if the counter is modified the phone don't let you broadcast well.
I owe you the link to Triangle Away. But you can try. It works for me.
Sent from my O=O
Hey guys,
I am unable to use WIFI Tether on any custom rom other than Touch wiz based rom.
Got an S3 through Rogers(SGHI747M)
As instructed, I've clean installed all the roms out in Original developement section including LIquid smooth, Carbon, AOSP Tasker.
The only non touch wiz rom that seems to work right now is Liquid smooth RC7 4.1.2 version but that too with the help of an app on play store.
Where am i going wrong here? Ive tried going through google and xda local search and have found no concrete solution to this problem.
Currently still running RC7 4.1.2 Liquid Smooth.
The network ssid seems to show up but cant connect when encrypted. Sometimes with these custom roms, even the ssid wont show.
Any recommendation guys?
Ibelive on some of the new ROMS Cm 10.1 for example there were issues with wifi tether while useing WPA and LTE tethering. I though some of those issues had been worked out. I may be wrong on that though. Does it work with open security?
Pbwizkid said:
Ibelive on some of the new ROMS Cm 10.1 for example there were issues with wifi tether while useing WPA and LTE tethering. I though some of those issues had been worked out. I may be wrong on that though. Does it work with open security?
Click to expand...
Click to collapse
Open security don't work either. Some claim that wifi tether will not work on cm10.1 based roms with Rogers and others have quickly debunked that theory but without having a possible solution to getting tether to work in cm 10.1. I really don't know who to believe anymore.