I have created this thread for all you SG-SIII Noobs & Senior Members!
The purpose of this thread is to limit the number of (sometimes useless) threads, that are created over a simple problem that can easily be solved by READING OR SEARCHING.
This is the Emergency thread!
*Did you run into a problem and need quick assistance?
*Do you have a question or concern about your SG-SIII device?
Don't panic just ask here and I or WE THE SG-SIII COMMUNITY will gladly help!
Ok, here's one. I unrooted using this method.
In download mode,
custom binary download: No
current binary: Samsung official
System status: official
but under system settings, device status reads "Modified"
Do I need to wipe my phone? was the .tar I flashed onto my phone secure?
Thanks so much for the help, I'm kind of panicking
If your already unrooted make a factory reset that should fix it.
...Awesome... said:
If your already unrooted make a factory reset that should fix it.
Click to expand...
Click to collapse
Alright, thanks I'll give that a shot.
Also did you make sure you resetted your flash counter to 0 before u unrooted/?
Yes, I used triangle away, and download mode shows that everything is good to go. Which led me to believe that the .tar file I flashed might have been modified. But I'll give the reset a shot.
Great idea! I'll make sure to come by a few times a week see if I can pitch in :good:
BWolf56 said:
Great idea! I'll make sure to come by a few times a week see if I can pitch in :good:
Click to expand...
Click to collapse
I would appreciate that thanks.
I was on CM 10.1
I wanted to get back to stock so I used odin to try and flash the rooted version of Stock JB.
Now my phone stays stuck at a glowing samsung logo.
Please advise.
Thanks,
-J
McConnellBrewing said:
I was on CM 10.1
I wanted to get back to stock so I used odin to try and flash the rooted version of Stock JB.
Now my phone stays stuck at a glowing samsung logo.
Please advise.
Thanks,
-J
Click to expand...
Click to collapse
How long as it been? It can take a while to boot up.
If after 10min it's still not botting up, go in recovery, clear cache/dalvik and reboot. If that doesn't work, factory reset and reboot.
Now if all of the above don't work, get back in download mode and reflash with Odin.
BWolf56 said:
How long as it been? It can take a while to boot up.
If after 10min it's still not botting up, go in recovery, clear cache/dalvik and reboot. If that doesn't work, factory reset and reboot.
Now if all of the above don't work, get back in download mode and reflash with Odin.
Click to expand...
Click to collapse
I am already using Odin so I don't think I can get back into CWM. I try the Home, Power, Volume down and it just puts it in download mode. I am trying re flashing with Odin now. we will see what happens this time.
McConnellBrewing said:
I am already using Odin so I don't think I can get back into CWM. I try the Home, Power, Volume down and it just puts it in download mode. I am trying re flashing with Odin now. we will see what happens this time.
Click to expand...
Click to collapse
recovery mode is vol up+home+power.
You don't need cwm to get in recovery. it's already there by default.
**2.4 ghz capped at 5mb link speed** ive been reading for the past 2 days still cant figure it out, i just got a GS3 and i noticed my wifi was really slow so i looked in to it. i can see when i do the *#0011# trick and turn off sleep mode etc i see my link speed at 78mb, then it gos all the way to 5mb and wont leave it also changes the network to 802.11b and i cant get it to go back to 802.11n unless i do the power off/power on again but 5 seconds later it will just go back to 802.11b when i connect on the 5ghz network everything is fine and stays on nothing changes. my router is a netgear n600 up to date firmware and i have an ATT gs3 with jell bean 4.1.1 no roms or root. im also sitting less then one foot from my router. modulation in the *#0011# gos from qpsk to cck. when i look at 5g it says N/A help please lol i dont wanna go back to my iphone 5
I made a backup of all apps as well as their data and my devices shared storage through an adb tool. If, after I factory reset, I restore this data, will my device once again display "modified"?
McConnellBrewing said:
I was on CM 10.1
I wanted to get back to stock so I used odin to try and flash the rooted version of Stock JB.
Now my phone stays stuck at a glowing samsung logo.
Please advise.
Thanks,
-J
Click to expand...
Click to collapse
Same thing happened to me a few weeks ago, thought I bricked it because I couldn't get it into recovery mode. Panicked for a while because I couldn't find any answers anywhere, and the laughed at myself when I realized recovery was volume up instead of volume down. Did a factory reset and went from there.
jerrah said:
**2.4 ghz capped at 5mb link speed** ive been reading for the past 2 days still cant figure it out, i just got a GS3 and i noticed my wifi was really slow so i looked in to it. i can see when i do the *#0011# trick and turn off sleep mode etc i see my link speed at 78mb, then it gos all the way to 5mb and wont leave it also changes the network to 802.11b and i cant get it to go back to 802.11n unless i do the power off/power on again but 5 seconds later it will just go back to 802.11b when i connect on the 5ghz network everything is fine and stays on nothing changes. my router is a netgear n600 up to date firmware and i have an ATT gs3 with jell bean 4.1.1 no roms or root. im also sitting less then one foot from my router. modulation in the *#0011# gos from qpsk to cck. when i look at 5g it says N/A help please lol i dont wanna go back to my iphone 5
Click to expand...
Click to collapse
Do you have any devices that still require the g protocol? Most devices today support N. And if that is the case, turn off all the unused protocols (a, b, g). That could be causing some issues.
Sent from my SAMSUNG-SGH-I747 using xda premium
d3athsd00r said:
Do you have any devices that still require the g protocol? Most devices today support N. And if that is the case, turn off all the unused protocols (a, b, g). That could be causing some issues.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
i tried. theres no option on my router settings for it. i can only choose 54/145/300 mbps i have a brand new n600 netgear router, and the internet works fine on my nexus 7 and iphone 5
FlyinHi said:
I made a backup of all apps as well as their data and my devices shared storage through an adb tool. If, after I factory reset, I restore this data, will my device once again display "modified"?
Click to expand...
Click to collapse
I'm really not sure but best way to find out is to try
BWolf56 said:
I'm really not sure but best way to find out is to try
Click to expand...
Click to collapse
Alright, thanks for all of the help btw.
Replacing digitizer
Hey, my colleague dropped her S3, the Glass itself is not cracked, and the LED display is fine as well, however the phone is not responding to touch input, so it must be the digitizer. Is there a way to replace JUST the digitizer? or is she going to have to get the entire glass/digitizer/led replacement piece?
This is what I'm looking at for the digitizer only.
This is what I'm looking at for the entire LED/Glass/Digitizer
Related
I have created this thread for all you SG-SIII Noobs & Senior Members!
The purpose of this thread is to limit the number of (sometimes useless) threads, that are created over a simple problem that can easily be solved by READING OR SEARCHING.
This is the Emergency thread!
*Did you run into a problem and need quick assistance?
*Do you have a question or concern about your SG-SIII device?
Don't panic just ask here and I or WE THE SG-SIII COMMUNITY will gladly help!
In case of emergency!
Okay I guess I'll be the first to post.
About an hour ago my phone shut off at 26% battery (16gb galaxy S3 running CM10.1 nightly 01/16). As I went to turn it back on it will boot into the CM splash screen spin a few times and just shut off. I attempted to charge it, and turn it back on but same thing. After that an attempt to get into CWM, which I was able to get in and it shut off while I was in it. I also tried putting the phone in download mode and about the same time frame it took for the other attempts resulted in a shut down.
Any advice? Or am I stuck doing a warranty exchange?
Rayman0625 said:
Okay I guess I'll be the first to post.
About an hour ago my phone shut off at 26% battery (16gb galaxy S3 running CM10.1 nightly 01/16). As I went to turn it back on it will boot into the CM splash screen spin a few times and just shut off. I attempted to charge it, and turn it back on but same thing. After that an attempt to get into CWM, which I was able to get in and it shut off while I was in it. I also tried putting the phone in download mode and about the same time frame it took for the other attempts resulted in a shut down.
Any advice? Or am I stuck doing a warranty exchange?
Click to expand...
Click to collapse
Sounds like its your battery not a hardware problem. Leave it overnight or a couple hours charging and if it indeed boots up its your battery.
If it doesn't then flash stock and test it if the same result then call up that Warranty. I've seen this same issue with other devices where the battery dies at 50%+ and usually replacing the battery fixes the problem. Test your battery for overheating or swollen.
Sent from my HTC One S using Tapatalk 2
...Awesome... said:
Sounds like its your battery not a hardware problem. Leave it overnight or a couple hours charging and if it indeed boots up its your battery.
If it doesn't then flash stock and test it if the same result then call up that Warranty. I've seen this same issue with other devices where the battery dies at 50%+ and usually replacing the battery fixes the problem. Test your battery for overheating or swollen.
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
The battery isnt swollen, thats one of the things I checked also. I thought it might be that, the only other option I have is to try a different battery. The good thing is I work in a tmobile store so im gonna give that a shot tomorrow.
Sv: ***Emergency Thread*** Here To Help!
Can you start it without battery connected to the wall charger? If so try wipe cache. Or after reflash ROM.
Sent from my LG-P990 using xda app-developers app
lintz said:
Can you start it without battery connected to the wall charger? If so try wipe cache. Or after reflash ROM.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Phone wont boot without the battery in, and with it in I cant stay in recovery without with rebooting.
Rayman0625 said:
The battery isnt swollen, thats one of the things I checked also. I thought it might be that, the only other option I have is to try a different battery. The good thing is I work in a tmobile store so im gonna give that a shot tomorrow.
Click to expand...
Click to collapse
Even better then lol just test it out at work. I'm about 80% its your battery specially if you OV/UC.
I have the t-mobile US t999.
Last night I was having an odd issue with the networking dropping. I've had the phone for about a month, modded since day 1 with a CM10 variation of a rom (sorry, I forget the exact rom). I had no issues whatsoever up until this point. After a few restarts thinking maybe it was a fluke issue with the network, or network signal in my room, the phone forced itself into emergency call mode only. I couldn't get it to come out.
So I decided I was going to odin on a stock rom as I could get it into download mode, that went through successfully. When the phone boots, I get the android taking off (Tmobile 4g) logo. Then the white samsung logo, and it doesn't go beyond this. I know this can take long so I left it there for about an hour, nothing. The phone also displays a blue led the entire time it's hanging as well.
Also worth noting, when I attempt to boot into recovery it just vibrates over and over.
Not sure what my next steps should be. Any help would be greatly appreciated.
heartspains88 said:
I have the t-mobile US t999.
Last night I was having an odd issue with the networking dropping. I've had the phone for about a month, modded since day 1 with a CM10 variation of a rom (sorry, I forget the exact rom). I had no issues whatsoever up until this point. After a few restarts thinking maybe it was a fluke issue with the network, or network signal in my room, the phone forced itself into emergency call mode only. I couldn't get it to come out.
So I decided I was going to odin on a stock rom as I could get it into download mode, that went through successfully. When the phone boots, I get the android taking off (Tmobile 4g) logo. Then the white samsung logo, and it doesn't go beyond this. I know this can take long so I left it there for about an hour, nothing. The phone also displays a blue led the entire time it's hanging as well.
Also worth noting, when I attempt to boot into recovery it just vibrates over and over.
Not sure what my next steps should be. Any help would be greatly appreciated.
Click to expand...
Click to collapse
after you odin, you need to wipe data/ factory reset to boot. If you can't get into recovery ( Power, Home Button, and Volume Up), then try reflashing your stock image in Odin and check your MD5 sum, so you can rule out a bad download
Thanks for the reply, I'm re-downloading the stock rom now to verify it's integrity and do a new flash. I cannot get into recovery, so we will see after the new flash. Pleading ignorance on one subject, how would I go about checking the MD5 sum to verify the file has no issues?
Additionally I did try to Odin recovery and still could not boot into it, this was however before attempting to re-download and flash a stock rom again.
**Edit//Update** Re-downloaded and flashed stock rom, was able to get into recovery and wipe, booted up fine.
Wow.. great idea for a thread and THANK YOU!!
Perfect timing too cause i need a little help please.
I am not new to android but new to samsung (WOW, didnt realize it would be so different from HTC ont he rooting and flashing side of things).
Long story short. I have a tmo s3. Bought it today and wanted to root. phone was working perfectly as it shoudl on stock rom unrooted. I downloaded the tool kit v7, used that to root adn install TWRP and rebooted into the stock rom that is now rooted. Still everything working perfect.
Here is what i did next and where the issues start.
Downloaded Synergy r290, went to recovery.
Wiped Cache, Dalvik, Data, and System (made a backup first)
flashed the rom and rebooted to system
However, nothing ever happened. I see the samsung logo, then all goes black and nothing happens (left it there for 10min)
I cant seem to get back into recovery holding vol up, home and power either and have no adb access to use that. I AM able to get into download mode which i know i can fix my problem here with odin, but i am just not sure what to flash and where.
Is there an easier way??
Thanks in advance for any help!
frettfreak said:
Wow.. great idea for a thread and THANK YOU!!
Perfect timing too cause i need a little help please.
I am not new to android but new to samsung (WOW, didnt realize it would be so different from HTC ont he rooting and flashing side of things).
Long story short. I have a tmo s3. Bought it today and wanted to root. phone was working perfectly as it shoudl on stock rom unrooted. I downloaded the tool kit v7, used that to root adn install TWRP and rebooted into the stock rom that is now rooted. Still everything working perfect.
Here is what i did next and where the issues start.
Downloaded Synergy r290, went to recovery.
Wiped Cache, Dalvik, Data, and System (made a backup first)
flashed the rom and rebooted to system
However, nothing ever happened. I see the samsung logo, then all goes black and nothing happens (left it there for 10min)
I cant seem to get back into recovery holding vol up, home and power either and have no adb access to use that. I AM able to get into download mode which i know i can fix my problem here with odin, but i am just not sure what to flash and where.
Is there an easier way??
Thanks in advance for any help!
Click to expand...
Click to collapse
If you absolutely can't get into recovery to restore your backup..
Flash the UVDLJA root66 file in this thread http://forum.xda-developers.com/showthread.php?t=1949687 via odin. You will have the latest UVDLJA JB update, and will be rooted. From there, install goo manager from the play store to flash TWRP.
After that you're all set to flash whatever you want (just make sure it's for the Tmobile s3).
Sent from my SGH-T999 using Tapatalk 2
Towle said:
If you absolutely can't get into recovery to restore your backup..
Flash the UVDLJA root66 file in this thread http://forum.xda-developers.com/showthread.php?t=1949687 via odin. You will have the latest UVDLJA JB update, and will be rooted. From there, install goo manager from the play store to flash TWRP.
After that you're all set to flash whatever you want (just make sure it's for the Tmobile s3).
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Ok, easy enough, but do i put that in the PDA field in Odin or phone?
This sounds MUCh easier than what i thought i would have to do.. thanks a ton!
frettfreak said:
Ok, easy enough, but do i put that in the PDA field in Odin or phone?
This sounds MUCh easier than what i thought i would have to do.. thanks a ton!
Click to expand...
Click to collapse
Just upload the file to PDA and hit start. Make sure to let it finish completely, once the phone reboots, it's done.
Sent from my SGH-T999 using Tapatalk 2
Flashing stock with Odin can take up to ten minutes its normal like the man said above just let it do its thing
Towle said:
Just upload the file to PDA and hit start. Make sure to let it finish completely, once the phone reboots, it's done.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Worked great! Thanks!!
http://forum.xda-developers.com/showthread.php?t=2113883
Let's see if you have any solution for me?
Weird problem. When I set kernel frequencies on my phone, they at some point get locked at the maximum frequency. This has happened every time I flash a new ROM or kernel, and I'm worried that it will soon start to affect the battery. I'm using the msmdvcs governor on both kernels that I've tried (stock and faux)
ohshootrawr said:
Weird problem. When I set kernel frequencies on my phone, they at some point get locked at the maximum frequency. This has happened every time I flash a new ROM or kernel, and I'm worried that it will soon start to affect the battery. I'm using the msmdvcs governor on both kernels that I've tried (stock and faux)
Click to expand...
Click to collapse
Do u happened to have apps that control frequency like setcpu etc? They might be conflicting each other
Sent from my HTC One S using Tapatalk 2
I downloaded the Jedi Mind Trick JB 2 ROM and installed it via clocwork mod recovery .. That went fine but it took me a few days to realize I didnt have a working video camera anymore on my phone.. so I thought to flash a stock ROOTed rom instead...
Then I found this threat about an updated version of Jedi Mind Trick's ROM labled JB 3.. So I wiped as much as I could in recovery and chose to format all the options it gave me in recover , Format system , data , cache , emms(or something) .. and now when I boot the phone , it shows the first flash screen , and the samsung logo starts to shimmer then it reboots back to the splash screen and repeats this process everal times before just going black and sitting there..
So I've successfully bootlooped my phone doing this..
MY PROBLEM -- I don't know how to charge my phone or connect to it to install anything else..
Is this a serious problem? How can I charge my phone to continue troubleshooting it? It still has some battery to try some things but I don't know how to hook it up to transfer any other roms to it via USB cable and PC in it's current state..
I'm very computer savvy but I'm trying to learn this phone modding stuff and I realy hope I didn't brick my phone in this process.
Can someone please help me out here? I'll be on the forums religiously until I figure this out.
What should I start doing first??
Any help would be greatly appreciated!! Thanks!
still working at it
I think I'm at the point of having to use ODIN to flash a new rom since i cannot simply copy this rom to the sdcard to use clockwork to flash it .. Am I correct on this ?
For some reason this rom I found (should be stock rooted tmobile gSII rom) does not want to open from ODIN's PDA button cause its in .zip and not .tar or anything... I'm not sure how to flash this rom with ODIN ( I'm not even 100% sure this is how its supposed to go) Any suggestions ?
phew
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
zarklon said:
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
Click to expand...
Click to collapse
Is this true? Through a recommendation (haven't done anything to my phone from rooting/flashing KANGSJUGGERNAUT2 years ago), I tried to flash CM10 and ended up with a bootloop myself. Tried flashing through ODIN but it kept crashing; does anyone know why?
Afterward, I tried to reflash it through CWM and from then on bootloops into a installation process that never completes.
For some reason my CWM turned super slow, freezes/hangs and reboots after a few minutes.
I gave the phone to a friend who does this stuff on the regular but he said my initial flash wasn't complete cause in download mode says I'm still running official? No clue.
I was told this via email/chat: "No luck, it won't even boot anymore, I think I'll just bring it back tmrw morn
10:43 PM
Sorry I'm at a wedding (yea I know random) I left my phone with coat check
OK I've narrowed down the reason but not the solution, you had an AOKP based ROM which fundamentally is based on CyanogenMod, but it wasn't correctly flashed as the phone still thought it has factory ROMs still running
11:10 PM
Clockworkmod(even though it was working before) wasn't accessing the partitions of the phone correctly so it wasn't properly wiping or flashing properly.
11:12 PM
So basically from the first time you flashed cwm it didn't flash properly then the next time you flashed using the new recovery it didn't flash anything it was supposed to do itself properly , so basically it was a chain of events in addition to a bad boot loader, that's why it never went to recovery or download mode correctly
11:13 PM
That's something that had to do with the way the phone was built meaning you may of had a bad bootloader from the very begin and are now feeling the synptoms
Basically, and I would hate to be the reason or partially the reason you have a dead phone, basically it was a matter of coincedencr that it happened as this could of happened at anytime, once you have a bad boot loader its pretty much down hill from there"
Any helpful insight as how I can rectify this? is my phone truly dead? Sorry about the quoted format, it was copied and pasted.
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
tronmech said:
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
JahJahLoO said:
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
Click to expand...
Click to collapse
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
sam.balia1012 said:
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
Click to expand...
Click to collapse
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
dont give up
JahJahLoO said:
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
Click to expand...
Click to collapse
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
sam.balia1012 said:
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
Click to expand...
Click to collapse
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
JahJahLoO said:
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
Click to expand...
Click to collapse
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
sam.balia1012 said:
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
Click to expand...
Click to collapse
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
JahJahLoO said:
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
Click to expand...
Click to collapse
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
sam.balia1012 said:
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
Click to expand...
Click to collapse
It might as well have... :crying:
Hello.. So today I attempted to flash a new version of TWRP for installing cleanrom and it bricked my phone. I can get into download mode though
So using ODIN i've been trying to install custom recoveries. Everytime it says pass, but I cannot get a recovery to show up. If I hold up, power and home buttons, the Galaxy note 2 will flash (as if its about to load a recovery) but then just goes back to galaxy note 2 screen. I can still make it to download mode, but cannot seem to get anywhere else.
Also, currently there is no rom on my phone.
Please help!
Thanks,
AC
AC2020x said:
Hello.. So today I attempted to flash a new version of TWRP for installing cleanrom and it bricked my phone. I can get into download mode though
So using ODIN i've been trying to install custom recoveries. Everytime it says pass, but I cannot get a recovery to show up. If I hold up, power and home buttons, the Galaxy note 2 will flash (as if its about to load a recovery) but then just goes back to galaxy note 2 screen. I can still make it to download mode, but cannot seem to get anywhere else.
Also, currently there is no rom on my phone.
Please help!
Thanks,
AC
Click to expand...
Click to collapse
Maybe use odin to start over fresh? Is the recovery separate from the kernel in the Note II?
Sent from my Apple IIe
billyjed said:
Maybe use odin to start over fresh? Is the recovery separate from the kernel in the Note II?
Sent from my Apple IIe
Click to expand...
Click to collapse
I think it is separate. The last thing I had was beanstalk with neak kernel. Then I wiped everything (not sure if that affect kernel or not) to prepare for cleanrom.
How do I use odin to start fresh?
Thanks!
AC2020x said:
I think it is separate. The last thing I had was beanstalk with neak kernel. Then I wiped everything (not sure if that affect kernel or not) to prepare for cleanrom.
How do I use odin to start fresh?
Thanks!
Click to expand...
Click to collapse
Install a factory image (probably with root and custom recovery) then proceed to flash whatever from there.
Sent from my Apple IIe
billyjed said:
Install a factory image (probably with root and custom recovery) then proceed to flash whatever from there.
Sent from my Apple IIe
Click to expand...
Click to collapse
Okay thanks,
I will have to try this after work. This may be a stupid question, but if anyone knows a good location where I can find this that would be really helpful.
I can search around for it more later.
Thanks
I bet Google knows.
Sent from my Apple IIe
SamMobile is a great site for firmwares.
After the screen turns on, let go of power and continue to hold up and home. Try it out.
johntortorella said:
SamMobile is a great site for firmwares.
Click to expand...
Click to collapse
mertin said:
After the screen turns on, let go of power and continue to hold up and home. Try it out.
Click to expand...
Click to collapse
Thanks.. I'm downloading from Sam Mobile now on my laptop at work.
And thanks for the tip. I will try this out as soon as I get home. I really hope my phone isn't pertinently bricked!
AC2020x said:
Thanks.. I'm downloading from Sam Mobile now on my laptop at work.
And thanks for the tip. I will try this out as soon as I get home. I really hope my phone isn't pertinently bricked!
Click to expand...
Click to collapse
If you need something to follow, this will help too.
Link
when you're "bricked" that means you can NOT get into download mode, so you are NOT bricked....
wase4711 said:
when you're "bricked" that means you can NOT get into download mode, so you are NOT bricked....
Click to expand...
Click to collapse
Oh sorry, I wasn't sure what the term bricked actually encompassed. I guess I was stuck in bootloop then.
Well, good and bad news. I got out of the bootloop, and finally got twrp installed on my phone. I did a recovery of beanstalk and also a fresh install of cleanrom. While they boot, they both have been going extremely slowly. Also just loading into recovery is taking super long. I don't know why. I am also not getting any signal, I can however connect to wifi. Anyone have any ideas or any thoughts on how to fix this?
Thanks again!
hey
if you can get into download mode try this find your provider and phone model and download the firware the nice thing this has root already installed so then you can just download goo and install twrp easy i always use this
http://forum.xda-developers.com/showthread.php?t=2004650
make sure you read it all so you have no problems all done with odin make sure you double check the check mark boxes well read and you will know what i am talking about
bigtomcat said:
if you can get into download mode try this find your provider and phone model and download the firware the nice thing this has root already installed so then you can just download goo and install twrp easy i always use this
http://forum.xda-developers.com/showthread.php?t=2004650
make sure you read it all so you have no problems all done with odin make sure you double check the check mark boxes well read and you will know what i am talking about
Click to expand...
Click to collapse
Just tried it out and it had the same problem. installed with ODIN no problem, but I still have no signal and it is still running very choppy.
When I go to mobile networks in settings it tells me "Insert SIM card to access network services" I have a sim and have tried reinserting it multiple times. I don't know whats going on. Also, it seems I do not have any internal storage. It says 200mb in storage that are fully used. When I have cleared everything but the rom.
I may attempt to return the phone tomorrow.
hey
AC2020x said:
Just tried it out and it had the same problem. installed with ODIN no problem, but I still have no signal and it is still running very choppy.
When I go to mobile networks in settings it tells me "Insert SIM card to access network services" I have a sim and have tried reinserting it multiple times. I don't know whats going on. Also, it seems I do not have any internal storage. It says 200mb in storage that are fully used. When I have cleared everything but the rom.
I may attempt to return the phone tomorrow.
Click to expand...
Click to collapse
nope a lot of people have that problem you have to remove your sim card and sd card and flash again then reboot i have seen people do this 3 times to clear all the bad flashes stuck on there phones make sure to factory reset too after by being off then hold down home power and volume up when you see the words pop up let go of all but volume up get into the system setting there factory all and restart then once you give it about 10 min put you sim card and sd card back and before wipe the sd card it has been know to cause some problems if that all doesn't work then ya maybe there is something else
good luck
I can get into recover,download mode, or the rom boot screen but phone turns off right after. It won't stay on long enough to change roms or backup anything. Does anyone have any suggestions of what to do? Thanks in advance
Can't not can...stupid tablet won't let me edit.
Please Specify your Rom and Kernel. If on Stock, do a factory reset.
Perseus71 said:
Please Specify your Rom and Kernel. If on Stock, do a factory reset.
Click to expand...
Click to collapse
I'm on Cyanogenmod with stock Kernel from Cyanogenmod, never changed my kernel. It was working fine for months then just rebooted on its own and won't stay on since. Unfortunately I'm stock and I'm not even sure it will stay on long enough to do anything to it.Its also not the battery. This video shows exactly whats happening to mine. https://www.youtube.com/watch?v=J61jghxz-Vc
If it can stay stable in Download mode, then you can Odin Flash Root66. Once that's done, flash recovery again and the Rom.
Perseus71 said:
If it can stay stable in Download mode, then you can Odin Flash Root66. Once that's done, flash recovery again and the Rom.
Click to expand...
Click to collapse
That's the problem I can't. Is there any other options. I'm not worried about backups or anything I just want it fixed.
The video points to Recovery only. Have you tried to boot into Download mode (the kind that has yellow triangle and Downloading message ) ?
Perseus71 said:
The video points to Recovery only. Have you tried to boot into Download mode (the kind that has yellow triangle and Downloading message ) ?
Click to expand...
Click to collapse
Yeh I've tried recovery and download. Neither one stays on for more than 5 seconds and in download mode after clicking up to go into download mode the phone restarts.
Could be hardware, could be softbrick. Can you try the De-Bricking thread's instructions ?
Perseus71 said:
Could be hardware, could be softbrick. Can you try the De-Bricking thread's instructions ?
Click to expand...
Click to collapse
Trying to find it now. Can you point me in the right direction with a link??
Pivo99 said:
Trying to find it now. Can you point me in the right direction with a link??
Click to expand...
Click to collapse
Here you go.
Perseus71 said:
Here you go.
Click to expand...
Click to collapse
I'm beginning to think its a hardware problem. I got it to boot into recovery long enough to factory reset, load a new rom, and gapps. I rebooted and it loaded for a few seconds and turns off. It booted again and went to the optimizing apps screen then shut off before it could finish. Does this sound like it could be a software problem?
Pivo99 said:
I'm beginning to think its a hardware problem. I got it to boot into recovery long enough to factory reset, load a new rom, and gapps. I rebooted and it loaded for a few seconds and turns off. It booted again and went to the optimizing apps screen then shut off before it could finish. Does this sound like it could be a software problem?
Click to expand...
Click to collapse
I got the phone to boot into cyanogenmod but in the set up screen it failed again. Really getting annoying and I can't figure out how to fix it.
Pull battery. Then put it back. Does it try to turn on by itself? Could be the power button issue many others have had.
DocHoliday77 said:
Pull battery. Then put it back. Does it try to turn on by itself? Could be the power button issue many others have had.
Click to expand...
Click to collapse
YES thats it I was thinking there might be a problem with the power button...Is there a fix on this or a thread anywhere?
There have been many threads posted with this issue, and some did manage to just buy the part and fix themselves. No instructions though thst I'm aware of.
I'd suggest you google galaxy s3 or t999 teardown.
DocHoliday77 said:
There have been many threads posted with this issue, and some did manage to just buy the part and fix themselves. No instructions though thst I'm aware of.
I'd suggest you google galaxy s3 or t999 teardown.
Click to expand...
Click to collapse
Found a few posts and people just thump around the general area of the power button and that seems to be a temporary fix and it worked for me for a little while. It's gonna work long enough to revert everything to stock and send in. Thanks you two for your help
I had a battery issue with my old Note2 and, before I realized it was the battery, I'd wiped the phone and returned it to new. I don't use it for anything more than a PDA and Media controller since I've upgraded to newer phones but I use it A Lot around the house and depend on it about as much as my Note 5
Anyway, I've got it rooted, I went to the EFS folders and the Factory Mode is ON the KeyStr is ON but, every time I reboot the phone, I still get that overlay screen and notice. I can turn WiFi on after the phone boots back up and I can get the Factory mode to go away by going to Settings> More> Application manager> ALL> factory Test and clearing the data. This is a temporary fix. After I reboot, I get the screen again.
Also, when I go to the All area and scroll to Factory, I see 2 Factory Mode icons. One is 84KB the other is 560KB.
Is there something else I need to do in order to reset this phone so I can get rid of the Factory Mode screen? I rellay need to get this PDA back up and running again.
Thank You in advance.
Do you have a custom recovery or can you get to download mode?
Sent from my SPH-L900 using XDA-Developers mobile app
No. No Custom Recovery. I can get into recovery mode. I found a website awhile back during my searches that had the Sprint .tar file and I tried to reinstall it via Odin but after the install, I still get the screen.
I don't know if I did something wrong during the install or if there is just something wrong with either the software or, could there be a hardware glitch that could be causing this? I really haven't done much rooting and customizing of my cell phones and such over the years so I've been kind of crash coursing myself on how to do it. I build computers and work with electronics as a hobby on the side but I've just never really done much with the smaller devices.
I appreciate any insight.
Thanks
Can you get into recovery mode (power home volume down). If so you could reformat and go back completely to stock using Odin. I'll post a link in a few to stock firmware
Edit: link to stock http://forum.xda-developers.com/showthread.php?t=2780984
Sent from my SPH-L900 using XDA-Developers mobile app
Thank You.
I am trying that version of the OS now and will let you know if that fixes it. It is downloading into the phone now.
Edit:
Downloaded, Installed, Rebooted automatically through Odin and it still came up with the Factory Mode screen.
Something it hasn't ever done before, after I connected it to my network, it recognized a need to download and install another System update.
JohnMcD348 said:
Thank You.
I am trying that version of the OS now and will let you know if that fixes it. It is downloading into the phone now.
Click to expand...
Click to collapse
I hope it helps I know I've used it when I flashed an international ROM and soft bricked so it should help this.
Sent from my SPH-L900 using XDA-Developers mobile app
Still no luck. After booting up, I still have the Factory Mode Screen on.
I can still get it to turn off while on by going through the App Manager and force stopping the Factory Mode and Factory Test apps and that stops the screen from coming back on.
The only other issue I have is the occasional request to activate that phone.
It just seems very odd that this issue has been so hard to repair.
Thank You again for your assitance. I appreciate it.
JohnMcD348 said:
Still no luck. After booting up, I still have the Factory Mode Screen on.
I can still get it to turn off while on by going through the App Manager and force stopping the Factory Mode and Factory Test apps and that stops the screen from coming back on.
The only other issue I have is the occasional request to activate that phone.
It just seems very odd that this issue has been so hard to repair.
Thank You again for your assitance. I appreciate it.
Click to expand...
Click to collapse
Just found this if you feel like rooting you could try this. http://zidroid.com/how-to-exit-factory-mode-for-samsung-galaxy-devices/
Sent from my SPH-L900 using XDA-Developers mobile app