Music lags when screen off - HTC Wildfire S

This is a notice to everyone....
I just recently discovered that if your cpu governer is smoothass and if your io governer is sio then your music will lag when the sceen is off and if the minimum frequency is below 245Mz. Issue dosnt exist with smartassv2 or others.
I use Google play Music so i dont know if this issue exists with other players. Im also using the cm10 jelly king v1.2 rom by kantry.
Sent from my HTC Wildfire S A510e using xda app-developers app

alansmathew said:
This is a notice to everyone....
I just recently discovered that if your cpu governer is smoothass and if your io governer is sio then your music will lag when the sceen is off and if the minimum frequency is below 245Mz. Issue dosnt exist with smartassv2 or others.
I use Google play Music so i dont know if this issue exists with other players. Im also using the cm10 jelly king v1.2 rom by kantry.
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
Its probably just how the governor deals with off screen mode. Besides dropping to low on the frequencys can lead to boot loops and the phone not being able to wake up :/ I'd say 245mhz is low enough :thumbsup:
tapped out from my sexy sensation XE

alansmathew said:
This is a notice to everyone....
I just recently discovered that if your cpu governer is smoothass and if your io governer is sio then your music will lag when the sceen is off and if the minimum frequency is below 245Mz. Issue dosnt exist with smartassv2 or others.
I use Google play Music so i dont know if this issue exists with other players. Im also using the cm10 jelly king v1.2 rom by kantry.
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
Increase the screen off max frequency.

Yeah, true but 120Mz is even lower for improved battery life so i just changed my cpu governer to smartassv2
Sent from my HTC Wildfire S A510e using xda app-developers app

Related

[Q] Best SetCPU settings?

As topic title suggests what are the best SetCPU settings for this phone (running ARHD 3.0), I'm new to SetCPU and the whole overclocking part of android (not new to android, i've been coming here and rooting etc since the G1 lol). Anyway just wondering if anyone has got any good setups/profiles they wish to share?
At the minute I just have my max at maximum and min at minimum with on demand scaling, nothing else. Any help is appreciated guys, thanks.
I use 245-1032mhz and smartass or interactive governor and I don't use any profiles because smartass locks the cpu @ 245 mhz when the display is turned off
Sent from my Desire HD using Tapatalk
245 min, 1228 max, smartass governor.
Works great for me.
Sent from my Desire HD using XDA App
245-1032mhz
How is the battery life with 1228MHz?
Sent from my Desire HD using XDA App
On-Demand 1036/245 & On-Demand 460/245 for screen-off.
No lag and battery life is awesome
toiversen said:
245 min, 1228 max, smartass governor.
Works great for me.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Tried these settings for a day now and really like them, had the same min and max but with on demand, smartass has definitely been giving me better battery over the course of today.
Sent from my Desire HD using XDA Premium App
I dobt have option to set smartass ect just ondenand performance and some other one any ideas why
Sent from my Desire HD using XDA App
snowwhite007 said:
I dobt have option to set smartass ect just ondenand performance and some other one any ideas why
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
I also dont have this option..
snowwhite007 said:
I dobt have option to set smartass ect just ondenand performance and some other one any ideas why
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Are you using the most recent version? 2.1.1a
Sent from my Desire HD using XDA Premium App
Daley87 said:
Are you using the most recent version? 2.1.1a
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
yeah 2.1.1a autodetect
Im using CM7 kernel, thats why...
Its because im not using a custom kernal apparantly
Sent from my Desire HD using XDA App
I have 245 - 1228 Mhz on demand , using Android revolution hd 3.0. Nearly 24h unplugged and on heavy use
Its because im using stock sense aha soz
Sent from my Desire HD using XDA App
Yes, smartass is nice. Especially since you don't need an extra "display off" profile. It sets CPU to 254 MHz automatically once the display is off.
That reminds me, is it just me or is adjusting the frequency/temperature etc settings on those sliders a pain in the a**? It'd be much easier if you could enter the digits using the keyboard instead of those sliders. Often the view is blocked by your own hand and setting exact values is almost impossible anyway.
bur2000 said:
Yes, smartass is nice. Especially since you don't need an extra "display off" profile. It sets CPU to 254 MHz automatically once the display is off.
That reminds me, is it just me or is adjusting the frequency/temperature etc settings on those sliders a pain in the a**? It'd be much easier if you could enter the digits using the keyboard instead of those sliders. Often the view is blocked by your own hand and setting exact values is almost impossible anyway.
Click to expand...
Click to collapse
I find On-Demand with a 460max / 245min screen-off profile works far better then Smartass with no profile as 245max caused wake lag for me + music player and Last.fm radio were stuttery when screen was off.
I do agree with your second point
CitizenLee said:
I find On-Demand with a 460max / 245min screen-off profile works far better then Smartass with no profile as 245max caused wake lag for me + music player and Last.fm radio were stuttery when screen was off.
I do agree with your second point
Click to expand...
Click to collapse
Will try this settings out, seems good!
bur2000 said:
Yes, smartass is nice. Especially since you don't need an extra "display off" profile. It sets CPU to 254 MHz automatically once the display is off.
That reminds me, is it just me or is adjusting the frequency/temperature etc settings on those sliders a pain in the a**? It'd be much easier if you could enter the digits using the keyboard instead of those sliders. Often the view is blocked by your own hand and setting exact values is almost impossible anyway.
Click to expand...
Click to collapse
A tip for your hand getting in the way: touch the slider with finger/thumb and slide ur finger/thumb down the screen a bit and then you'll see that then when sliding left or right its like your still on the bar but you can now see what your doing!
Sent from my Desire HD using XDA App
I've just installed SetCPU for the first time. Set to smartass and left as 245 and 1036 as set by LeeDroid ROM/Kernel.
Will this increase battery life as opposed to not having Set CPU installed and leaving it as stock?
bluebirds said:
I've just installed SetCPU for the first time. Set to smartass and left as 245 and 1036 as set by LeeDroid ROM/Kernel.
Will this increase battery life as opposed to not having Set CPU installed and leaving it as stock?
Click to expand...
Click to collapse
I find smartass does a better job at reducing the cpu when it's not needed which in turn increases the battery life

[Q] [B]What speed shall i set my Desire hd on?[/B]

hi, I'm currently using no frills CPU to manage my CPU speed, with Virtous unity ROM, max is 1.5ghz, shall I do 1.2 ghz and leave it on demand or performance? What would use up the battery more?
also, what do the other options do apart from performance and on demand? Like interactive and conservative etc?
I currently have mine set at 1.3 (ondemand), do not choose performance it will drain the battery.
Sent from my Desire HD using XDA App
AndriodLover said:
I currently have mine set at 1.3 (ondemand), do not choose performance it will drain the battery.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Could you explain what each governor does please, I dont know them such as interactive, conservative, etc. and which one is the most sufficient one for battery saving?
Rumz786 said:
Could you explain what each governor does please, I dont know them such as interactive, conservative, etc. and which one is the most sufficient one for battery saving?
Click to expand...
Click to collapse
Try using search it's shouldn't be surprising that other people may have already asked this question, or if your too lazy

[Q] Problem with OC...

hey folks...
this is my first post... (sorry for my bad english )
Im using wildchild rom 2.0... using No-Frills CPU Control i over-clocked my cpu to
Max = 768 Mhz
Min = 122 Mhz
Gov = Scary
I/O = sio
phone runs smoothly without any lags and probs... but when i play music it plays without trouble and when the screen off the music starts to stuck ... and i cannot immediately wake my phone... it takes about 15 sec to get screen on ... sp i changed the gov to - smartassv2 (with same freq)... and checkd the music.. it is playing smoothly.. then i put the phone on charger and gone out... my mom called me thinking that im having the phone... now my mobile got frozen at my mom's incoming call screen.. so i pulled the battery and turned on the phone
pls help.. which is the best frequency, gov for normal use... ( i want better battery backup)...
Kishoke said:
hey folks...
this is my first post... (sorry for my bad english )
Im using wildchild rom 2.0... using No-Frills CPU Control i over-clocked my cpu to
Max = 768 Mhz
Min = 122 Mhz
Gov = Scary
I/O = sio
phone runs smoothly without any lags and probs... but when i play music it plays without trouble and when the screen off the music starts to stuck ... and i cannot immediately wake my phone... it takes about 15 sec to get screen on ... sp i changed the gov to - smartassv2 (with same freq)... and checkd the music.. it is playing smoothly.. then i put the phone on charger and gone out... my mom called me thinking that im having the phone... now my mobile got frozen at my mom's incoming call screen.. so i pulled the battery and turned on the phone
pls help.. which is the best frequency, gov for normal use... ( i want better battery backup)...
Click to expand...
Click to collapse
Post in the correct section, your question will be answered there.
Sent from my Wildfire S A510e using xda premium
SomeDudeOnTheNet said:
Post in the correct section, your question will be answered there.
Sent from my Wildfire S A510e using xda premium
Click to expand...
Click to collapse
yes... i wrongly posted in this section... i reported moderators about moving this to q/a section...
SomeDudeOnTheNet said:
Post in the correct section, your question will be answered there.
Sent from my Wildfire S A510e using xda premium
Click to expand...
Click to collapse
try ondemand deadline
Try flashing another kernel, im using smartassv2, noop, and no problems for me
Sent from my HTC Wildfire S A510e using xda premium
Spitras said:
Try flashing another kernel, im using smartassv2, noop, and no problems for me
Sent from my HTC Wildfire S A510e using xda premium
Click to expand...
Click to collapse
same thing happened to me and there are two ways to fix it easy, turn up your min to 200 or use a diff. gov. like smartass v2

[Q] ViperDHD v1.2.1 Battery issue

Hi im using ViperDHD v1.2.1 on my Dhd for 4 days now, it's à great rom but i think the battery draining raster than normal
I made some screenshots for the stats.
I hope someone gonna help me.
Sent from my HTC Desire HD using xda app-developers app
Try with....
virtuous_infinity-v1.35.0-ace_kernel_20120917.zip
You can find it in the same page, really better
Sent from my HTC Desire HD using xda premium
I'm using it, is the beastmode Kernel Vetter ?
Sent from my Desire™ HD With Beats Audio using xda app-developers app
Try the BeastMode kernel with a more power saving CPU governor like smartassV2
Hi thx for the reply can you plz give me a Link to to beastmode Kernel and cpu app
Sent from my Desire™ HD With Beats Audio using xda app-developers app
This is my favorite cpu control app
http://forum.xda-developers.com/showthread.php?t=1222020
hi can you tell me what's the best config in DaemonController that i have to do ?
Well I use min 245mhz max 1024mhz with smartassV2 as governor. And you can search for BeastMode kernel, flash it.
I had battery jumps (still do sometimes) so I use Battery Calibrator (from the market, it's free) to delete the batterystats. I'm also using Virtuous' kernel (in combination with a "screen off" profile in SetCPU (128 min, 300 ish max - ondemand governor). If you haven't already, delete your HTC Sense account from the phone. It really chews through the battery (for very little reason).
My Desire HD is overclocked to 1.3ghz with all that and it's still at 87% charge after 3 hours (currentWidget is telling me it's been using 4-5mA with the screen off).

[SOLVED] link2sd,int2ext+ not working.

Hello,
i have htc wildfire s (marvel,rooted,s-on,stock 2.3.5 rom).i have facing problems with internal storage tweaks,like link2sd isn't working on my phone and also i have tried cronmod int2ext+ its working for a while (one-two weeks) then automatically my phone slow down and then restart self and all my apps data removed.
i dont know what is problem,might possible if i ported many different rom before?if anyone have solution please help.
Are you using stock kernel? Flash cake kernel or dust and try link2sd again.
Sent from my Wildfire S A510e using xda app-developers app
sukhjit321 said:
Are you using stock kernel? Flash cake kernel or dust and try link2sd again.
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
im using stock kernel.can you send me link of both kernels and which one is best for good battery life? and also tell me about min,max,gov. setting for them because i dont know much.
and i just have to flash it via recovery ? i need to wipe anything like dalvik cache or partition cache?
thanks in advance.
I'm from phone so I won't be able to provide you link right now. You can search it in the development section.
You just need to flash the zip without any wipes or anything.
I personally like smartass v2 as it gives a balance between performance and battery with cfq scheduler. Set minimum to whatever doesn't give you lag and max to 787.
Sent from my Wildfire S A510e using xda app-developers app
sukhjit321 said:
I'm from phone so I won't be able to provide you link right now. You can search it in the development section.
You just need to flash the zip without any wipes or anything.
I personally like smartass v2 as it gives a balance between performance and battery with cfq scheduler. Set minimum to whatever doesn't give you lag and max to 787.
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
okay thanks for ur help mate.i will let you know after working this thing out.
Anytime.
Sent from my Wildfire S A510e using xda app-developers app
sukhjit321 said:
Anytime.
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
hey i m using cake kernel v1.4 by einstein frat
bt really i dont wana overclock my phone.i changed that setting.
my correct settings are:
122MHz-600 MHz
ondemand,deadline
my phone isnt lag.so is it good for good battery life?
or i should hv chose smartass v2 and cfq?
and really i dont want to overclock my phone so.
Smartass governor works better when it cones to savings battery as well as thrusting performance. I'd suggest you try it once. I really have no specific knowledge about any perfect input output scheduler but cm cones with cfq and i used to go with noop on my sense roms. It's all about smoothness isn't it?
Sent from my Wildfire S A510e using xda app-developers app
---------- Post added at 11:29 AM ---------- Previous post was at 11:28 AM ----------
And yeah with clocking to 600 Mhz you are definitely saving more battery than a higher clock so don't worry.
Sent from my Wildfire S A510e using xda app-developers app
sukhjit321 said:
Smartass governor works better when it cones to savings battery as well as thrusting performance. I'd suggest you try it once. I really have no specific knowledge about any perfect input output scheduler but cm cones with cfq and i used to go with noop on my sense roms. It's all about smoothness isn't it?
Sent from my Wildfire S A510e using xda app-developers app
---------- Post added at 11:29 AM ---------- Previous post was at 11:28 AM ----------
And yeah with clocking to 600 Mhz you are definitely saving more battery than a higher clock so don't worry.
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
hey buddy.you were right,smartass v2 is better than stock settings.it gives me more life.
can you tell me min frequency is better when its high or low..like if i set min frequency to 122 MHz is better or 480 MHz is better?
i do what you said.i just flashed it without any wipes.so when i didnt wipe my old kernel so it overwrite it on? like stock kernel replaced by cake?
and im using set cpu app is good right?
Re: [Q] link2sd,int2ext+ not working.
crossfire77 said:
hey buddy.you were right,smartass v2 is better than stock settings.it gives me more life.
can you tell me min frequency is better when its high or low..like if i set min frequency to 122 MHz is better or 480 MHz is better?
i do what you said.i just flashed it without any wipes.so when i didnt wipe my old kernel so it overwrite it on? like stock kernel replaced by cake?
and im using set cpu app is good right?
Click to expand...
Click to collapse
Yes set cpu is good.
You can just flash kernel without any wipes.. Yes it should have replaced the old.
A lower cpu min cpu frequency is preffered but it should be high enough to cause no lag when unlocking the phone. 245 Mhz is the ideal frequency
Sent from my Wildfire S A510e using xda app-developers app

Categories

Resources