Hello,
i have htc wildfire s (marvel,rooted,s-on,stock 2.3.5 rom).i have facing problems with internal storage tweaks,like link2sd isn't working on my phone and also i have tried cronmod int2ext+ its working for a while (one-two weeks) then automatically my phone slow down and then restart self and all my apps data removed.
i dont know what is problem,might possible if i ported many different rom before?if anyone have solution please help.
Are you using stock kernel? Flash cake kernel or dust and try link2sd again.
Sent from my Wildfire S A510e using xda app-developers app
sukhjit321 said:
Are you using stock kernel? Flash cake kernel or dust and try link2sd again.
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
im using stock kernel.can you send me link of both kernels and which one is best for good battery life? and also tell me about min,max,gov. setting for them because i dont know much.
and i just have to flash it via recovery ? i need to wipe anything like dalvik cache or partition cache?
thanks in advance.
I'm from phone so I won't be able to provide you link right now. You can search it in the development section.
You just need to flash the zip without any wipes or anything.
I personally like smartass v2 as it gives a balance between performance and battery with cfq scheduler. Set minimum to whatever doesn't give you lag and max to 787.
Sent from my Wildfire S A510e using xda app-developers app
sukhjit321 said:
I'm from phone so I won't be able to provide you link right now. You can search it in the development section.
You just need to flash the zip without any wipes or anything.
I personally like smartass v2 as it gives a balance between performance and battery with cfq scheduler. Set minimum to whatever doesn't give you lag and max to 787.
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
okay thanks for ur help mate.i will let you know after working this thing out.
Anytime.
Sent from my Wildfire S A510e using xda app-developers app
sukhjit321 said:
Anytime.
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
hey i m using cake kernel v1.4 by einstein frat
bt really i dont wana overclock my phone.i changed that setting.
my correct settings are:
122MHz-600 MHz
ondemand,deadline
my phone isnt lag.so is it good for good battery life?
or i should hv chose smartass v2 and cfq?
and really i dont want to overclock my phone so.
Smartass governor works better when it cones to savings battery as well as thrusting performance. I'd suggest you try it once. I really have no specific knowledge about any perfect input output scheduler but cm cones with cfq and i used to go with noop on my sense roms. It's all about smoothness isn't it?
Sent from my Wildfire S A510e using xda app-developers app
---------- Post added at 11:29 AM ---------- Previous post was at 11:28 AM ----------
And yeah with clocking to 600 Mhz you are definitely saving more battery than a higher clock so don't worry.
Sent from my Wildfire S A510e using xda app-developers app
sukhjit321 said:
Smartass governor works better when it cones to savings battery as well as thrusting performance. I'd suggest you try it once. I really have no specific knowledge about any perfect input output scheduler but cm cones with cfq and i used to go with noop on my sense roms. It's all about smoothness isn't it?
Sent from my Wildfire S A510e using xda app-developers app
---------- Post added at 11:29 AM ---------- Previous post was at 11:28 AM ----------
And yeah with clocking to 600 Mhz you are definitely saving more battery than a higher clock so don't worry.
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
hey buddy.you were right,smartass v2 is better than stock settings.it gives me more life.
can you tell me min frequency is better when its high or low..like if i set min frequency to 122 MHz is better or 480 MHz is better?
i do what you said.i just flashed it without any wipes.so when i didnt wipe my old kernel so it overwrite it on? like stock kernel replaced by cake?
and im using set cpu app is good right?
Re: [Q] link2sd,int2ext+ not working.
crossfire77 said:
hey buddy.you were right,smartass v2 is better than stock settings.it gives me more life.
can you tell me min frequency is better when its high or low..like if i set min frequency to 122 MHz is better or 480 MHz is better?
i do what you said.i just flashed it without any wipes.so when i didnt wipe my old kernel so it overwrite it on? like stock kernel replaced by cake?
and im using set cpu app is good right?
Click to expand...
Click to collapse
Yes set cpu is good.
You can just flash kernel without any wipes.. Yes it should have replaced the old.
A lower cpu min cpu frequency is preffered but it should be high enough to cause no lag when unlocking the phone. 245 Mhz is the ideal frequency
Sent from my Wildfire S A510e using xda app-developers app
Related
Hello All,
Can anyone give me a proper procedure of how to use the Incredicontrol app? I downloaded the app from the market and checked the posts on the forum. I read it shows two lists with the + & - signs to set the min and max temp. but in my app I can only see the one list with + & - signs and I am not able to get how to set the temp. Please help.. I have attached the screenshot.. Please go through it...
I am with XperiaMod6 with DooMKernel v19.
to undervolt, use that - for All.
it decreases 25. do it again and apply to see how far you can go, yet stable .
---------- Post added at 04:57 PM ---------- Previous post was at 04:55 PM ----------
to undervolt, use that - for All.
it decreases 25. do it again and apply to see how far you can go, yet stable .
Sorry I didnt get u...
I knw that it is for undervolting. I just want to know y my app looks different than that specified on the forum? What do all those nos. mean? are those different frequencies?
mandarjoshiin said:
Sorry I didnt get u...
I knw that it is for undervolting. I just want to know y my app looks different than that specified on the forum? What do all those nos. mean? are those different frequencies?
Click to expand...
Click to collapse
This app shows you voltages each frequency.
Why different....its simple and working app.
Sent from my MT15i using Tapatalk
I have tried it...
Try undervolting it with -100 on all... That is stable on mine and then apply the settings
Sent from my LT18i using XDA App
DenmarkRootN00b said:
I have tried it...
Try undervolting it with -100 on all... That is stable on mine and then apply the settings
Sent from my LT18i using XDA App
Click to expand...
Click to collapse
Wow....-100 All....and stable?
Sent from my MT15i using Tapatalk
Better try -50mV at first.
Mine was stable from -100mV to -200mV and after 4 months with oc I had to go back to -75mV to -175mV.
Sent from my LT15i using XDA Premium App
taaviu said:
Wow....-100 All....and stable?
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
Yes -100 and no overclock works great for me.... And my battery life is pretty good with Xperia mod v6 and doomkernel v19 and baseband 64 + patch but try with -50 to get started :-D
Sent from my LT18i using XDA App
DenmarkRootN00b said:
Yes -100 and no overclock works great for me.... And my battery life is pretty good with Xperia mod v6 and doomkernel v19 and baseband 64 + patch but try with -50 to get started :-D
Sent from my LT18i using XDA App
Click to expand...
Click to collapse
Im heavy user and already over -50 is unstable for me
Does anybody have any idea how to setup 2 or more voltage profiles?
ETC: Screen off voltage profile and screen on voltage profile
Makes no sense, CPU can't handle different undervolting when screen is off or on.
Sent from my iPad 2 using Tapatalk
Flo95 said:
Makes no sense, CPU can't handle different undervolting when screen is off or on.
Sent from my iPad 2 using Tapatalk
Click to expand...
Click to collapse
But why not?
If phone can handle different frequency...why not different voltages.?
If i can change voltages, then would be nice if screen off takes more -25 all frequency and if screen on then +25 to all
Why only "incredi control" voltage app works with Neo? It think wiht Arc too!?
Ummm I've been wondering about this... for a little while. Now I'm trying Incredicontrol and I'm undervolting my Arc -100mv. I'll run with that for now and see what kind of "possible problems" I may encounter if any.
taaviu said:
But why not?
If phone can handle different frequency...why not different voltages.?
If i can change voltages, then would be nice if screen off takes more -25 all frequency and if screen on then +25 to all
Why only "incredi control" voltage app works with Neo? It think wiht Arc too!?
Click to expand...
Click to collapse
taaviu said:
Im heavy user and already over -50 is unstable for me
Does anybody have any idea how to setup 2 or more voltage profiles?
ETC: Screen off voltage profile and screen on voltage profile
Click to expand...
Click to collapse
But you need to reboot for the volts to apply, so for that you'd need to reboot every time you want to use your phone ???
There's a setting that sets it on boot.
I wonder wat causes all the random reboot,is it got to do with undervolt,overvolt,CPU speed and minfree value?
Sent from my Desire Z using xda app-developers app
Steven How said:
I wonder wat causes all the random reboot,is it got to do with undervolt,overvolt,CPU speed and minfree value?
Sent from my Desire Z using xda app-developers app
Click to expand...
Click to collapse
..overvolt?
Anyway undervolting and CPU speed can definitely cause reboots. Some phones can't go beyond 1.2GHz and I know undervolting can cause instability when brought down too low.
Personally I haven't had a random reboot in as long as I can remember, but I also don't undervolt and I don't OC past 1.2GHz.
Well,I'm using sense rom in the moment,enabled swap and supercharge.. and oc it at 468-1458mhz.. =\ still reboot,does vm heapsize affect rebooting?
Sent from my Desire Z using xda app-developers app
Steven How said:
Well,I'm using sense rom in the moment,enabled swap and supercharge.. and oc it at 468-1458mhz.. =\ still reboot,does vm heapsize affect rebooting?
Sent from my Desire Z using xda app-developers app
Click to expand...
Click to collapse
My phone's upper limit is also at 1.4GHz, runs stable on it, but haven't really felt the need for that. One thing that comes to mind is that your lower limit is pretty high. What governor do you use? Do you have a profile for screen off and what's the frequency fork there?
I would assume that with that setup the phone gets pretty heated, which could very easily cause random reboots. Any idea what temperature it usually runs on?
Myth010 said:
My phone's upper limit is also at 1.4GHz, runs stable on it, but haven't really felt the need for that. One thing that comes to mind is that your lower limit is pretty high. What governor do you use? Do you have a profile for screen off and what's the frequency fork there?
I would assume that with that setup the phone gets pretty heated, which could very easily cause random reboots. Any idea what temperature it usually runs on?
Click to expand...
Click to collapse
468-1457mhz smartass screen in,122-468mhz screen off conservative.. =\
Sent from my Desire Z using xda app-developers app
Maybe you should try lowering the upper limit to 1.2GHz for a while see if it makes any change... in the meantime it might be helpful to know:
a) Which specific rom are you using?
b) Any custom kernel?
Myth010 said:
Maybe you should try lowering the upper limit to 1.2GHz for a while see if it makes any change... in the meantime it might be helpful to know:
a) Which specific rom are you using?
b) Any custom kernel?
Click to expand...
Click to collapse
Android revolution 6.3.3 (sense 3)
And unity v9 kernel..
Sent from my Desire Z using xda app-developers app
mine used to reboot when i first had it, searched the net & it suggested the sim card.... made sure it was pushed in properly & its been fine ever since....
I found out when I use this android revolution 6.3.3 rom,and flash a music player mod by lyapota,it mix up the word,like holding home it appear recent app,but after flashing I get your personal information and if I use home long press to multitask,the whole phone will just reboot :/
Sent from my Desire Z using xda app-developers app
Hi,
I'm running the cm10 nightly ROM stock and my CPU governor has only one option of "interactive" available. My CPU is maxed out always and the device heats up under regular use. How can I enable ondemand or other governors.
I believe you must use other kernels.
How do I do that? Which kernel should I use? And where I can I find it?
Thanks.
Sent from my HTC One X using xda app-developers app
last nightly. I underclock to 1200mhz no heat issue
I have the 04/11 nightly. I clocked it to 1000mhz. Still have heat issues. Would like to change the CPU governor to on demand but option doesn't show, I'm only given interactive option. What do I do to add more governor options?
Sent from my HTC One X using xda app-developers app
If you need use ondemand. i recommend use ncx kernel but ondemand on NCX kernel still have small issue such as lag in sometime
Where can I find the ncx kernel ?
Sent from my HTC One X using xda app-developers app
not to be rude, but searching for it would be faster than waiting for a reply and it isn't THAT concealed.
http://forum.xda-developers.com/showthread.php?t=1873615
Your next questions'll be answered somewhere if you search.
I am searching for the kernel and I've actually already downloaded the boot.IMG and module from the link you gave but I'm trying to find out If I can flash it over my cm10 nightly ROM , do u know if I can? And if you do, how do I do that.
Thanks
Sent from my HTC One X using xda app-developers app
cugwuh said:
I am searching for the kernel and I've actually already downloaded the boot.IMG and module from the link you gave but I'm trying to find out If I can flash it over my cm10 nightly ROM , do u know if I can? And if you do, how do I do that.
Thanks
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Please read the opening post of the kernel thread. Each dev has clear instructions on the first page of their thread on how to install their kernel. I believe n3ocort3x is no exception.
Okay. Thanks everyone for helping out. I think I'll just use it as is & hopefully I'll find a way to get it working in the future.
I tried flashing the module I downloaded but it aborted with errors.
Sent from my HTC One X using xda app-developers app
hey folks...
this is my first post... (sorry for my bad english )
Im using wildchild rom 2.0... using No-Frills CPU Control i over-clocked my cpu to
Max = 768 Mhz
Min = 122 Mhz
Gov = Scary
I/O = sio
phone runs smoothly without any lags and probs... but when i play music it plays without trouble and when the screen off the music starts to stuck ... and i cannot immediately wake my phone... it takes about 15 sec to get screen on ... sp i changed the gov to - smartassv2 (with same freq)... and checkd the music.. it is playing smoothly.. then i put the phone on charger and gone out... my mom called me thinking that im having the phone... now my mobile got frozen at my mom's incoming call screen.. so i pulled the battery and turned on the phone
pls help.. which is the best frequency, gov for normal use... ( i want better battery backup)...
Kishoke said:
hey folks...
this is my first post... (sorry for my bad english )
Im using wildchild rom 2.0... using No-Frills CPU Control i over-clocked my cpu to
Max = 768 Mhz
Min = 122 Mhz
Gov = Scary
I/O = sio
phone runs smoothly without any lags and probs... but when i play music it plays without trouble and when the screen off the music starts to stuck ... and i cannot immediately wake my phone... it takes about 15 sec to get screen on ... sp i changed the gov to - smartassv2 (with same freq)... and checkd the music.. it is playing smoothly.. then i put the phone on charger and gone out... my mom called me thinking that im having the phone... now my mobile got frozen at my mom's incoming call screen.. so i pulled the battery and turned on the phone
pls help.. which is the best frequency, gov for normal use... ( i want better battery backup)...
Click to expand...
Click to collapse
Post in the correct section, your question will be answered there.
Sent from my Wildfire S A510e using xda premium
SomeDudeOnTheNet said:
Post in the correct section, your question will be answered there.
Sent from my Wildfire S A510e using xda premium
Click to expand...
Click to collapse
yes... i wrongly posted in this section... i reported moderators about moving this to q/a section...
SomeDudeOnTheNet said:
Post in the correct section, your question will be answered there.
Sent from my Wildfire S A510e using xda premium
Click to expand...
Click to collapse
try ondemand deadline
Try flashing another kernel, im using smartassv2, noop, and no problems for me
Sent from my HTC Wildfire S A510e using xda premium
Spitras said:
Try flashing another kernel, im using smartassv2, noop, and no problems for me
Sent from my HTC Wildfire S A510e using xda premium
Click to expand...
Click to collapse
same thing happened to me and there are two ways to fix it easy, turn up your min to 200 or use a diff. gov. like smartass v2
My phone keeps moving the setting on cpu, it's set for 1.5 to 348mhz but when I back out it goes to 1.5 to 1.3 and my battery been dying so fast I ready factory reset my phone but still happens not running no custom kernel
Sent from my SGH-I747 using xda app-developers app
Are you saying its going from 1.5 to 1.3 as the max or the min? What are you using to adjust these parameters?
The CPU is designed to range from 96Mhz all the way to 2.1 GHz depending on the kernel. Stock is 384 MHz to 1.5 GHz. The CPU with adjust according to load. The real way to see what the CPU is actually doing is to install CPU Spy from the market.
You need to provide the kernel your using, the ROM, if its ICS or JB. You can't be on stock
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
g2tegg said:
Are you saying its going from 1.5 to 1.3 as the max or the min? What are you using to adjust these parameters?
The CPU is designed to range from 96Mhz all the way to 2.1 GHz depending on the kernel. Stock is 384 MHz to 1.5 GHz. The CPU with adjust according to load. The real way to see what the CPU is actually doing is to install CPU Spy from the market.
You need to provide the kernel your using, the ROM, if its ICS or JB. You can't be on stock
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
im trying to set 1.5 to 348 min. but when i set and back out it goes to 1.5 to 1.3 min. im on serenity 1.2 rom and i just flashed ktoonsez kernel to see if it will stick now and it doesnot and im on Jb
Are you using ktweaker to set the values? It comes with the ktoonz kernel. And make sure it has root permissions as well.
Also install the app I mentioned from the play store (free) and see if your phone is going to "deep sleep".
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
g2tegg said:
Are you using ktweaker to set the values? It comes with the ktoonz kernel. And make sure it has root permissions as well.
Also install the app I mentioned from the play store (free) and see if your phone is going to "deep sleep".
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
i did try that ktweaker in that app it says 1.5 to 348 min but in other apps it says1.5 to 1.3 or 1.5 to 1.5 and yes it says deep sleep 4%
You might not have a problem after all. As long as the CPU is scaling from the 1.5 to 384, your phone is running fine.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 05:06 AM ---------- Previous post was at 05:05 AM ----------
Screenshot CPU Spy for me if you don't mind. If I don't respond I past out and will get back to you in the AM lol
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
g2tegg said:
You might not have a problem after all. As long as the CPU is scaling from the 1.5 to 384, your phone is running fine.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 05:06 AM ---------- Previous post was at 05:05 AM ----------
Screenshot CPU Spy for me if you don't mind. If I don't respond I past out and will get back to you in the AM lol
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Sent from my SGH-I747 using xda app-developers app
if you want great battery life do a google search of my signature for the site with this rom or pm me and i will send you the link
g2tegg said:
You might not have a problem after all. As long as the CPU is scaling from the 1.5 to 384, your phone is running fine.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 05:06 AM ---------- Previous post was at 05:05 AM ----------
Screenshot CPU Spy for me if you don't mind. If I don't respond I past out and will get back to you in the AM lol
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Also when my phone goes into deep sleep is that bad?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
htcbrazilian said:
Also when my phone goes into deep sleep is that bad?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
deep sleep means your radio, 3g, wifi etc all pretty much shut off. The only things that 'wake' them up to sync and check email etc are 'wakelocks'.
Your phone shouldn't be in such a high cpu range unless your using an app. My guess is an app wakelock is out of control and forcing your phone to do this. If you are on a ktoonsez kernel or rom go and lock the cpu frequencies at about 918mhz. When you lock frequencies it won't go as high, but the problem of a background app setting off wakelocks won't go away
Get bettery battery stats for bettery results
Be sure to thank me!
zetsui said:
deep sleep means your radio, 3g, wifi etc all pretty much shut off. The only things that 'wake' them up to sync and check email etc are 'wakelocks'.
Your phone shouldn't be in such a high cpu range unless your using an app. My guess is an app wakelock is out of control and forcing your phone to do this. If you are on a ktoonsez kernel or rom go and lock the cpu frequencies at about 918mhz. When you lock frequencies it won't go as high, but the problem of a background app setting off wakelocks won't go away
Get bettery battery stats for bettery results
Be sure to thank me!
Click to expand...
Click to collapse
My phone goes into deep sleep it does not have wake locks problems. My problem is in my set cpu app it says 1.5 to 1.5 min it won't let me stick anything and I just won't back to stock and had to root again and download set cpu again and it says 1.5 to 1.5 min I though maybe it was a rom but it's still doing it idk if it's just the app doing that
Sent from my SAMSUNG-SGH-I747 using xda app-developers app