Hi,
I'm running the cm10 nightly ROM stock and my CPU governor has only one option of "interactive" available. My CPU is maxed out always and the device heats up under regular use. How can I enable ondemand or other governors.
I believe you must use other kernels.
How do I do that? Which kernel should I use? And where I can I find it?
Thanks.
Sent from my HTC One X using xda app-developers app
last nightly. I underclock to 1200mhz no heat issue
I have the 04/11 nightly. I clocked it to 1000mhz. Still have heat issues. Would like to change the CPU governor to on demand but option doesn't show, I'm only given interactive option. What do I do to add more governor options?
Sent from my HTC One X using xda app-developers app
If you need use ondemand. i recommend use ncx kernel but ondemand on NCX kernel still have small issue such as lag in sometime
Where can I find the ncx kernel ?
Sent from my HTC One X using xda app-developers app
not to be rude, but searching for it would be faster than waiting for a reply and it isn't THAT concealed.
http://forum.xda-developers.com/showthread.php?t=1873615
Your next questions'll be answered somewhere if you search.
I am searching for the kernel and I've actually already downloaded the boot.IMG and module from the link you gave but I'm trying to find out If I can flash it over my cm10 nightly ROM , do u know if I can? And if you do, how do I do that.
Thanks
Sent from my HTC One X using xda app-developers app
cugwuh said:
I am searching for the kernel and I've actually already downloaded the boot.IMG and module from the link you gave but I'm trying to find out If I can flash it over my cm10 nightly ROM , do u know if I can? And if you do, how do I do that.
Thanks
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Please read the opening post of the kernel thread. Each dev has clear instructions on the first page of their thread on how to install their kernel. I believe n3ocort3x is no exception.
Okay. Thanks everyone for helping out. I think I'll just use it as is & hopefully I'll find a way to get it working in the future.
I tried flashing the module I downloaded but it aborted with errors.
Sent from my HTC One X using xda app-developers app
Related
I know there have probably been hundreds of threads about this but I can't find them so I'm starting another one. What is faux clock? Is it a kernel or script or what? And what does it do?
Sent from my SGH-T989 using XDA
hiz99 said:
I know there have probably been hundreds of threads about this but I can't find them so I'm starting another one. What is faux clock? Is it a kernel or script or what? And what does it do?
Sent from my SGH-T989 using XDA
Click to expand...
Click to collapse
It's an app developed by Romanbb that enables you to OC/UC your speeds and undervolt your voltages, look in the faux kernel thread for additional reference, here is the link:
MODERATOR EDIT - LINKS REMOVED
Do I flash it through cwm or what?
Sent from my SGH-T989 using XDA
Fauxclock from my experience is horrible. I have had it on multiple roms and every time I set it on boot and come back in to the app it auto changes the settings to max on low and high and make my phone reboot because the processor is maxed out all the time. I have tried downloading the latest version over and over again and have other things. I don't recommend it till it comes out with another version.
Hello, i am new to the android world, and am loving it. Ive tried a couple of roms, and decided to stick with Liquid Smooth Jelly Bean Rom. My only problem is this:
i have set the max frequency for the processor to be 1512 mhz(or lower sometimes), but sometimes it keeps automatically setting itself to 1900mhz, which i do not want. Is there a way to set it so that it will never go above 1512?
btw i am on 3.0.45 leanKernel if that helps.
Thanks
Check mark the set on boot box and restart phone right away after you change it back to 1500mhz.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Deoxlar said:
Check mark the set on boot box and restart phone right away after you change it back to 1500mhz.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thank you! I'm trying it out right now =]
Sent from my SGH-I747 using xda app-developers app
Hello. So I tried this method and thought it worked.. but today while watching YouTube and texting it went up to 1900 again. I repeated the method a couple more times but it just maxes out all the time. Am I doing something wrong?
Thanks
Sent from my SGH-I747 using xda app-developers app
are there any solutions to this?
Depends what kernel you're running, some kernel apps let you lock the frequencies so they cannot be changed by apps. If an app needs to run faster it will bump up the speed, so might want to check into that. Works on KT747 Kernel (Ktweaker).
DarthDerron said:
Depends what kernel you're running, some kernel apps let you lock the frequencies so they cannot be changed by apps. If an app needs to run faster it will bump up the speed, so might want to check into that. Works on KT747 Kernel (Ktweaker).
Click to expand...
Click to collapse
Ty for reply. Also, Any cm10 kernel will work with liquid smooth jb right? If so, is there a tutorial on just how to flash kernel with a different rom ?
Sent from my SGH-I747 using xda app-developers app
ohaai said:
Ty for reply. Also, Any cm10 kernel will work with liquid smooth jb right? If so, is there a tutorial on just how to flash kernel with a different rom ?
Here's the link for the KT747 Kernel http://forum.xda-developers.com/showthread.php?t=1756776 . It works with all AOSP (CM10, AOKP etc.) aswell as most touchwiz roms. I've never used Liquidsmooth so Idk what it's about but this thread should contain information about which roms it is compatible with. If you have any questions I suggest starting a new thread about what its compatible with or asking directly in the thread. Good luck Always flash Rom before kernel.
Click to expand...
Click to collapse
ty will do
Hello everybody. I've a problem with setcpu with the JB stock Rom Vodafone UK(3.14.161...). I was able to run it and let it running in background but since yesterday I updated to JB, I set the setcpu options, and when I go out from the app and close it, I reopen the app and the options I set before are still in there but its like it doesn't work properly, because I want to underclock to 1,2 ghz but when I open the app the clock is usually in 1,4ghz and I look for the clock frequencies graphics and see there are lots of time using more than 1,2 ghz. So that should means setcpu is not working properly, anyone has an idea how I can make setcpu work properly? Thank you very much mate!!
Sent from my HTC One X using Tapatalk 2
Is your phone rooted?
peedub said:
Is your phone rooted?
Click to expand...
Click to collapse
Yes, of course it is mate
Sent from my HTC One X using Tapatalk 2
Doesn't nobody know anything about it?? Pleaaase, I'd like to use setcpu and it worked correctly... Thanks in advance
Sent from my HTC One X using Tapatalk 2
Pleaaase I really need anyone's help....
Sent from my HTC One X using Tapatalk 2
Did you check in the playstore if the app is even compatible with JB ? Just a guess
I checked and it should work fine, are you running the last update or an older version....
You can't change cpu frequency on stock kernels. And no custom kernels work for sense JB so you're out of luck.
Sent from my HTC One X using xda app-developers app
tomascus said:
You can't change cpu frequency on stock kernels. And no custom kernels work for sense JB so you're out of luck.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Ok, it was what I started to think... ****. Thank mate for help me
Sent from my HTC One X using Tapatalk 2
Hello,
i have htc wildfire s (marvel,rooted,s-on,stock 2.3.5 rom).i have facing problems with internal storage tweaks,like link2sd isn't working on my phone and also i have tried cronmod int2ext+ its working for a while (one-two weeks) then automatically my phone slow down and then restart self and all my apps data removed.
i dont know what is problem,might possible if i ported many different rom before?if anyone have solution please help.
Are you using stock kernel? Flash cake kernel or dust and try link2sd again.
Sent from my Wildfire S A510e using xda app-developers app
sukhjit321 said:
Are you using stock kernel? Flash cake kernel or dust and try link2sd again.
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
im using stock kernel.can you send me link of both kernels and which one is best for good battery life? and also tell me about min,max,gov. setting for them because i dont know much.
and i just have to flash it via recovery ? i need to wipe anything like dalvik cache or partition cache?
thanks in advance.
I'm from phone so I won't be able to provide you link right now. You can search it in the development section.
You just need to flash the zip without any wipes or anything.
I personally like smartass v2 as it gives a balance between performance and battery with cfq scheduler. Set minimum to whatever doesn't give you lag and max to 787.
Sent from my Wildfire S A510e using xda app-developers app
sukhjit321 said:
I'm from phone so I won't be able to provide you link right now. You can search it in the development section.
You just need to flash the zip without any wipes or anything.
I personally like smartass v2 as it gives a balance between performance and battery with cfq scheduler. Set minimum to whatever doesn't give you lag and max to 787.
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
okay thanks for ur help mate.i will let you know after working this thing out.
Anytime.
Sent from my Wildfire S A510e using xda app-developers app
sukhjit321 said:
Anytime.
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
hey i m using cake kernel v1.4 by einstein frat
bt really i dont wana overclock my phone.i changed that setting.
my correct settings are:
122MHz-600 MHz
ondemand,deadline
my phone isnt lag.so is it good for good battery life?
or i should hv chose smartass v2 and cfq?
and really i dont want to overclock my phone so.
Smartass governor works better when it cones to savings battery as well as thrusting performance. I'd suggest you try it once. I really have no specific knowledge about any perfect input output scheduler but cm cones with cfq and i used to go with noop on my sense roms. It's all about smoothness isn't it?
Sent from my Wildfire S A510e using xda app-developers app
---------- Post added at 11:29 AM ---------- Previous post was at 11:28 AM ----------
And yeah with clocking to 600 Mhz you are definitely saving more battery than a higher clock so don't worry.
Sent from my Wildfire S A510e using xda app-developers app
sukhjit321 said:
Smartass governor works better when it cones to savings battery as well as thrusting performance. I'd suggest you try it once. I really have no specific knowledge about any perfect input output scheduler but cm cones with cfq and i used to go with noop on my sense roms. It's all about smoothness isn't it?
Sent from my Wildfire S A510e using xda app-developers app
---------- Post added at 11:29 AM ---------- Previous post was at 11:28 AM ----------
And yeah with clocking to 600 Mhz you are definitely saving more battery than a higher clock so don't worry.
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
hey buddy.you were right,smartass v2 is better than stock settings.it gives me more life.
can you tell me min frequency is better when its high or low..like if i set min frequency to 122 MHz is better or 480 MHz is better?
i do what you said.i just flashed it without any wipes.so when i didnt wipe my old kernel so it overwrite it on? like stock kernel replaced by cake?
and im using set cpu app is good right?
Re: [Q] link2sd,int2ext+ not working.
crossfire77 said:
hey buddy.you were right,smartass v2 is better than stock settings.it gives me more life.
can you tell me min frequency is better when its high or low..like if i set min frequency to 122 MHz is better or 480 MHz is better?
i do what you said.i just flashed it without any wipes.so when i didnt wipe my old kernel so it overwrite it on? like stock kernel replaced by cake?
and im using set cpu app is good right?
Click to expand...
Click to collapse
Yes set cpu is good.
You can just flash kernel without any wipes.. Yes it should have replaced the old.
A lower cpu min cpu frequency is preffered but it should be high enough to cause no lag when unlocking the phone. 245 Mhz is the ideal frequency
Sent from my Wildfire S A510e using xda app-developers app
Ive done a lot of seaching but cant seem to find the answer....
I have a P936 running a slightly modified version of AT & T's ICS P930 ROM and Kernal.
Ive just finished setting up everything but want to overclock and dont know which kernal to choose.....
Any help? My software version is V20c.....
Use wind kernel, you won't be disappointed. Just make sure you run through the whole thread for the p930/6 version. I'm now using it on a clean v20f, couldn't be happier.
Sent from my LG-P930 using xda app-developers app
Awsome, thx man! Im rockin at 1800MHz now
But now I also want to OC the GPU, know any good app for that? I cant seem to find one...
Faux123 kernel tool is designed to work with windkernel and allows gpu over clock and many other useful tools for kernel tuning
Sent from my LG-P930 using xda app-developers app
Faux clock lets me set the GPU's 3D clock speed to 320MHz and thats where Ive got it. But the Wind kernal is also supposed to allow overclocking the 2D speed. How do you do that? Cant find any setting for that in the faux app. They say something about echoing something somewhere in the Wind kernal thread.... Any help?
StashCompInc said:
Faux clock lets me set the GPU's 3D clock speed to 320MHz and thats where Ive got it. But the Wind kernal is also supposed to allow overclocking the 2D speed. How do you do that? Cant find any setting for that in the faux app. They say something about echoing something somewhere in the Wind kernal thread.... Any help?
Click to expand...
Click to collapse
Use a terminal emulator app and run the commands listed in that thread exactly as written in the thread to overclock 2d
Sent from my LG-P930 using xda app-developers app
Hutch89 said:
Use a terminal emulator app and run the commands listed in that thread exactly as written in the thread to overclock 2d
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
Ok but then will the setting stick or do I have to set it again via terminal every time I reboot?