I will gladly provide a tutorial after I am done doing this. The only problem I have is getting the MMS to work and getting the 3G to work, I have voice and sms done. I know how to fix the 3G just need a little help with it. This is what I have to change to get 3G working. Now for the password do I need to use the aaa from the donor phone or from the galaxy? Also another problem I think I might have created. I typed in ##Data# on the phone dialpad. I entered the spc, then I went into the aaa password and I deleted it. Did the same for the ha password. So if those are needed how do I recover them? As for the donor phone I can still get the aaa and ha passwords, as I have not messed with anything on it.
Under PAP:
UID: [email protected]
Pwd: samsung
Under HDR AN:
NAI: [email protected]
Pwd: (checked) enter your 32 digit HEX AAA password
Under HDR AN Long:
UID: [email protected]
Pwd: (checked) enter your 32 digit HEX AAA password
Related
I'm happily using my PDA2K on multiple networks on GPRS.
I've just been given a SIM which has permission to use 2 different APNs on the same network.The phone company says they are identical in terms of user name, password, etc requirements.
I can happily log onto one APN. logging onto the other comes up with the "modem has disconnected" message, though the network support guy tells me I did get through initially.
Same message as you get if you don't have permission to use the APN, or set wrong username/password in the PDA.
I note that the PDA has nowhere to enter the *99# 0r *99***1# type string which other units have. Does anyone understand whether this, or anything else, could explain my difficulties?
Ok I flashed my evo using this guide http://forum.xda-developers.com/showthread.php?p=11358982#post11358982 minus the jimney rom because I cant seem to download it
and my 3g icon will briefly appear than disappear then reappear within 5 seconds..
No internet what so ever
Any help would be much appreciated... my local phone flashing store quoted me 100 bucks to do it!
P.S. Dunno if it matters but talk and text and wi-fi all work fine...
So what rom are you running?
Hello,
When your 3G icon is active do you get Internet data?
Im running stock 2.2 and the icon flashes too quickly to tell if I get data
bump. Can anybody please help me!
Pm me your email address. Ill email you a copy of my qpst file. I bet you have some settings wrong.
Sent from my GT-P1000 using XDA App
thanks will do
well guys i think my phone its not working goood any more i changes my setting a then i can recive calls y did epst restore and everything works can some one gimme a hand,becuse if i changes anything epst i wont recive calls htc evo 4g
Hi, I am having some trouble getting the internet on my phone. I have read quite a few things, as well as followed many tutorials/guides/howto on flashing and epst settings etc.
My phone is a sprint Htc Evo, p36100. it is rooted properly, running the Jiminy V rom.
I changed my epst settings to as follows: (FFA/SURF QSD8650 Rev. 2.0)
Settings Tab:
Service Programming code: 000000 (wrong?)
field service: 000000 (wrong?)
One time subs. lock: 333333 (4 uses) (wrong?)
Slot Cycle Index: 1
Auto NAM: CHECKED
Current NAM: NAM1
SPC Change Enabled: CHECKED
Analog Silent Redial: UNCHECKED
There are 6 roam messages, all blank.
CDMA TAB:
NAM1
NAM Name: cricKet (wrong? case sensitive?)
Directory #: 443531#### (my phone number, 10 digits)
ADC: 2
MCC:310
11_12: 00
IMSI_S: 443303#### (my 10 digit MIN)
Class 1: UNCHECKED
Home SID: CHECKED
Foreign SID: CHECKED
Foreign NID: CHECKED
A primary B
283 and 384
A secondary B
691 and 777
EVRC Enabled: UNCHECKED
Home Page: 13k
Home Orig: 13k
Roam Orig: 13k
CDMA2 TAB
Nam Name: cricKet
Directory #: my 10 digit phone number
Access Overload Class: 2
True IMSI
MCC: 310
11_12:00
IMSI_S:000000#### (# = four digits, never seen before)
Class 1: UNCHECKED
AMPS TAB
NAM1
NAM Name: cricKet
Directory #: My 10 digit phone number
Access Overload Class: 0 (cant change)
Phone Number: My 10# phone number
1st Paging Channel: (blank)
Registration: hide
Home SID: 0
System Tab
NAM Name: cricKet
Directory #: My 10 digit phone number
Access Overload Class: 2
SID/NID
6535/65535
0/65535 (all the rest)
Perferred Mode: Automatic
Band Preference: Automatic
Roam Preference: Automatic
ROAM TAB
NAM Name: cricKet
Directory #: My 10 digit phone number
Access Overload Class: 2
Preferred Roaming:
Preferred Roaming: UNCHECKED (cant change)
FILE: I am using cricket's 42900 PRL (all others keep phone in roaming)
DISPLAY TAB
Banner: Cricket
Backlight: Always on
Show time Available: CHECKED
Auto Hyphen: CHECKED
skipping SOUNDS TAB
FEATURES/ALERTS TAB
Auto Answer: off
Beep Length: normal
Auto Retry: 30 Seconds
Full Pref Mode: CHECKED
HFK Voice Recog. Enabled: CHECKED
HFK Voice Answer: CHECKED
One Touch Dial: CHECKED
Service Area Alert: CHECKED
Call Fade Alert: UNCHECKED
Minute Alert: CHECKED
(skipping sms)
skipping PHONE BOOK TAB
1x/HDR SECURITY TAB
Lock Mode: (blank)
Lock Code: 7777
Restrict Phone: UNCHECKED
R-UIM Config: (Blank)
Card Holder Verification: #1 and #2 are both blank
Special Numbers: 10 entries, no numbers, all 'priority' status
DATA TAB
MDR Mode: Svc Opt 33 Pfrd
Service Option: IS-707
Data QNC: CHECKED
Data SCRM: CHECKED
Pkt Dial String: #777
Pkt Dial Map: (Bland and disabled)
Remote Initiate IPCP: (nothing checked)
Remote Initiate IPV6CP: (nothing checked)
Reduced Dormance Timeout: 5000
Resume Default Dormancy Timeout: 20000
IPV6 TAB, NOTHING ENABLED, BLANK
M.IP TAB
User Profile: 1 profile, profile 0, as follows:
Profile Enabled: CHECKED
NAI: MY10DIGIT#@mycricket.com
Tethered NAI: MY10DIGIT#@mycricket.com
HA Shared Secret: cricket
AAA Shared Secret: cricket
MN-HA SPI: 12c
MN-AAA SPI: 2
DMU Public Key ID: 0
DMU Mobile Authentication: (Blank)
Rev Tunnel Preferred: UNCHECKED
Home Address: 0.0.0.0
Primary HA Address: 68.28.15.12
Secondary HA address: 68.28.31.12
[END OF PROFILE 0]
Active User: 1
Mobile IP Behavior: Simple IP only
Initial Registration Retry Interval: 2000mS
RFC20012bis MN-HA authentication calculation: CHECKED
Re-Register only if traffic since last RRQ: UNCHECKED
QC optimized dormant handoff: UNCHECKED and DISABLED
Registration Retries: 1
Deregestration Retries: 0
Pre-lifetime-expiry Re-registration(min): 30
M.IPv6 TAB
There are 6 profiles, all blank. Everything else is Blank.
PPP CONFIG TAB
Rm
Config Tries Request Config NAK Terminate Request Compression
Timeout Tries Tries Timeout Setting
LCP: 20 1000 3 2 3000
IPCP: 20 1000 3 3 1000 Disable
IPCPv6: 0 18039 212 34 61440 Disable
PPP Authentication:
Retires: 5
Timeout: 3000
Tethered NAI: BLANK, UNABLE TO CHANGE
USER ID: BLANK, UNABLE TO CHANGE
PASSWORD: BLANK, UNABLE TO CHANGE
Req PW enc: UNCHECKED
Primary DNS: BLANK, UNABLE TO CHANGE
Secondary DNS: BLANK, UNABLE TO CHANGE
Optimized Dormant Handoff: UNCHECKED UNABLE TO CHANGE
1xEVDO->1x: UNCHECKED. UNABLE TO CHANGE
IPCP KEEP ALICE DURING PDP: UNCHECKED
PPP Detect: UNCHECKED
Um
Config Tries Request Config NAK Terminate Request Compression
Timeout Tries Tries Timeout Setting
LCP: 20 1000 3 2 3000
IPCP: 20 1000 3 3 1000 Ignore
IPCPv6: 0 18039 212 34 61440 Enable
PPP Authentication:
Retires: 5
Timeout: 3000
Tethered NAI: my10#@mycricket.com
USER ID: my10#@mycricket.com
PASSWORD: BLANK
Req PW enc: UNCHECKED
Primary DNS: BLANK
Secondary DNS: BLANK
Optimized Dormant Handoff: CHECKED
1xEVDO->1x: CHECKED
IPCP KEEP ALICE DURING PDP: UNCHECKED
PPP Detect: UNCHECKED
AN
Config Tries Request Config NAK Terminate Request Compression
Timeout Tries Tries Timeout Setting
LCP: 20 1000 3 2 3000
IPCP: 20 1000 3 3 1000 Disable
IPCPv6: 0 18039 212 34 61440 Disable
PPP Authentication:
Retires: 0
Timeout: 0
Tethered NAI:BLANK, UNABLE TO CHANGE
USER ID: my10#@mycricket.com
PASSWORD: BLANK
Req PW enc: UNCHECKED
Primary DNS: BLANK
Secondary DNS: BLANK
Optimized Dormant Handoff: UNCHECKED
1xEVDO->1x: UNCHECKED
IPCP KEEP ALICE DURING PDP: UNCHECKED
PPP Detect: UNCHECKED
I have phone service, and i can send simple text messages. It is not in roaming mode. GPS seems to work also.
I have installed a zip file: cricket_web_mms_v10.zip and restored the proper APN file for cricket.
I have also tried the proxy settings change with the anycut program..
I think they have the wrong phone type, and i am on the 45 dollar plan..
Any help would be appriciated
AFAIK you have to be in the $55 and what prl are you using? Im using one I found at a different place than the guide
P.S My solution was that I figured out that my MIN was wrong thats why I couldn't receive anything... when I'm ungrounded I will post a guide (I'm using cm7 rc1 and apps/gps/wap/mms/calls/txts are all working magnificently)
help please i am having same problem as timinator94
hello there i bought a htc evo phone from sprint and i flashed it to cricket network
i followed the tutorial and everything works great but 3G. it resets every 10 second and some times the signal goes away too i can see the little x on the sighnal icon this signal thing happens atleast every 2 minutes i thinkl i am having the same problem as timinator94 please help me and i do have the $55 android plan and when i do get connected to the internet is very slow i think because the 3 is going on and off thanks
Hi, is there anyway to reconfigure the 1x data connection username and password on the Verizon HTC Incredible?
Are these settings in the NAM somewhere rather than in the OS like in WM?
Thanks!
Edit: Think it's through ##778. I'll try in the morning. It's 0230hrs here.
ADR6300 said:
Hi, is there anyway to reconfigure the 1x data connection username and password on the Verizon HTC Incredible?
Are these settings in the NAM somewhere rather than in the OS like in WM?
Thanks!
Edit: Think it's through ##778. I'll try in the morning. It's 0230hrs here.
Click to expand...
Click to collapse
yep. ##778 to get to the settings. you need to be on a sense based rom with EPST.apk in the system/app folder
Unfortunately no. PST doesn't have any settings for the username and password for you data account.
Where would that be located?
that's true, Nik. There is no setting for UN and PW in PST. Anyone knows where else to look.
ADR6300 said:
that's true, Nik. There is no setting for UN and PW in PST. Anyone knows where else to look.
Click to expand...
Click to collapse
What network are you trying to do this for? Why do you only have a 1x and not 3g connection? Just curious.
well the phone has both 1x and EVDO but I'm trying to get the 1x working first.
ADR6300 said:
well the phone has both 1x and EVDO but I'm trying to get the 1x working first.
Click to expand...
Click to collapse
If your thru verizon just dial *228 and select option 1, it will program it ota.
I'm outside of US.
ADR6300 said:
I'm outside of US.
Click to expand...
Click to collapse
##778# is the only way / place i know of to put programing. Data info should mostly be in M.IP Default Profile. Your user name in NAI and DUN NAI and the password in HA and AA Shared Secret.
I checked but the MIP parameters are if the cdma network is configured with data roaming. We use no roaming - Simple IP (SIP) instead of Mobile IP (MIP). Most parameters under MIP settings are for just that, MIP.
found this on the web. seems legit but still didn't work for me. some setting is still not right.
Step 1: Reprogramming your phone
from your phone, dial ##pst (##778) - Press Call
click "edit mode"
enter security code 000000
scroll down to M.IP Settings
change MIP Mode to Simple IP only
hit back
scroll down to Security
change the "HDR AN AUTH User Id (LONG) to "proper TATA username"
change the "HDR AN AUTH Password (LONG) to "proper TATA password"
change the "PPP User Id to "proper TATA username"
change the "PPP Password to "proper TATA password"
change the "S.IP DUN Username to "proper TATA password"
hit back
press menu, choose "Commit Modifications."
The phone will power cycle.
ADR6300 said:
found this on the web. seems legit but still didn't work for me. some setting is still not right.
Step 1: Reprogramming your phone
from your phone, dial ##pst (##778) - Press Call
click "edit mode"
enter security code 000000
scroll down to M.IP Settings
change MIP Mode to Simple IP only
hit back
scroll down to Security
change the "HDR AN AUTH User Id (LONG) to "proper TATA username"
change the "HDR AN AUTH Password (LONG) to "proper TATA password"
change the "PPP User Id to "proper TATA username"
change the "PPP Password to "proper TATA password"
change the "S.IP DUN Username to "proper TATA password"
hit back
press menu, choose "Commit Modifications."
The phone will power cycle.
Click to expand...
Click to collapse
The issue may be the passwords. They are ment to be encrypted i believe, at least they are in my settings. Here is an example of what my password field looks like ( í… *É1‚¤].VDW.ö¾ ), i have no clue how you would go about encrypting them, and most of the characters are not on the phones keyboard to type it in if you could encrypt it. I suppose you could use qpst on a pc to be able to enter the characters, but still no clue how to encrypt it.
Also S.IP DUN Username should be your tata user name not password as you stated above. My user name fields looks like this ( [email protected] ), and the dun one is ( [email protected] ). Hope that helps some how, just throwing stuff out there.
ok, confirming. It's working now. I just had to configure the PPP UN and PW to get the 1x working.
Hi again, now that the 1x is working fine does anyone know any specific configs to make the EVDO work?
ADR6300 said:
Hi again, now that the 1x is working fine does anyone know any specific configs to make the EVDO work?
Click to expand...
Click to collapse
Nothing specific, but here is some screenshots of my setings (personal info blacked out) in EPST. Hopefully it will help you in some way. Just download and unzip. EPST Screenshots
Will someone please tell me if the AAA keys are married to the other data on a phone. Like the MEID, MIN, MDN and such?
Thank you,
John
So I'm trying to flash Cricket's Samsung Vitality (R720) to a non-US carrier. Everything is fine except for the data settings. For the NAI and PPP settings, it uses a different number than the MDN. This number is a code (5 digits) plus the MDN. The problem is that all Cricket handsets take just MDN numbers (10 digits only) for the NAI and PPP settings. Whenever it exceeds 10 digits for the MDN portion of the NAI and PPP, it reverts back to a default number upon reboot. For example, on cricket a normal PPP number would be [email protected]. For this other carrier, the MDN would be [email protected]. What can I do so that I can permanently enter anything I want on the PPP and NAI fields?
Sent from my XT1034 using Tapatalk