How to fix sensors in jellybeer/jellybam/aosp/cm10 ROMs. - AT&T Samsung Galaxy Note II

This is a quick and easy way to restore your sensors if they aren't working.
1. From aosp rom Go here and download Note2Core_7105_v2.21_STD.zip
2. Reboot into recovery.
3. Flash the downloaded note2core
4. Reboot into system. Wait. It will boot. After it gets done. Don't unlock. Just push a button to turn the screen on (if needed) hit OK to all the errors. When the errors go away do not unlock.
5. Hold power for 3-4 seconds. And select reboot->recovery
6. Flash aosp ROM.
7. Flash gapps.
8. Reboot into system.
9. Profit.
Credit and thanks go to antiochasylum and Skyler2dope.
antiochasylum for the note2core kernel.
Skyler2dope for the find.
Edit: Here is the original forum by a antiochasylum (incase the link to note2core changes)
Sent from GN2 using XDA app

Interesting. Why does this work?
Edit: Can't get your link to work.)

bmstrong said:
Interesting. Why does this work?
Edit: Can't get your link to work.)
Click to expand...
Click to collapse
Sorry about the URL link. I fixed it.
Not sure why it works. But for some reason when you flash from certain kernels the sensors just don't work.
Sent from GN2 using XDA app

Cannot thank you enough. I had had this problem in the past, was able to fix it. Happened again. Couldn't get anything to work. Flashed 2 dozen times. This fixed everything.

Roms are fixed now. Just update. Thanks op for the fix!
Sent from my SGH-I317 using Tapatalk 2
---------- Post added at 01:22 AM ---------- Previous post was at 01:21 AM ----------
Skyler2Dope said:
Roms are fixed now. Just update. Thanks op for the fix!
Sent from my SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Well some of them are...jellybeer for sure.
Sent from my SGH-I317 using Tapatalk 2

No fix for me. It just goes black after flash/reboot. I have to pull the battery and reboot into TWRP.

Thanks, worked for me on Intl. Note II 4G running JellyBam port

bmstrong said:
No fix for me. It just goes black after flash/reboot. I have to pull the battery and reboot into TWRP.
Click to expand...
Click to collapse
same for me atm..
Gonna try with full wipes

How long are we suppose too wait until it boots? It's blank after it says Samsung Galaxy Note II.

I left it for a half hour while trying to get a logcat.. so yea.
Also tried all of the fixes of flashing a stock rom to get the sensors back, then reflashing. After a few hrs, back on the Jedi for now.
Bummer.

decalex said:
I left it for a half hour while trying to get a logcat.. so yea.
Also tried all of the fixes of flashing a stock rom to get the sensors back, then reflashing. After a few hrs, back on the Jedi for now.
Bummer.
Click to expand...
Click to collapse
Have u tried flashing a jellybeer 4.1.2 ROM the dirty flash the most recent jellybeer 10.1 ROM then go do all ur wipes and reflash 10.1? It works...I did it for fun last night.
Sent from my GT-N7105 using Tapatalk 2

Related

[Q] Blu Kuban shutdown

I run rogue recovery and decided to give Blu Kuban fe10 1.0.3.9 a chance. Looks sharps and behaves well. Here is my issue. If my screen shuts off or if I hit the power button to kill the screen, I have roughly two seconds to hit the button again to get the screen to come up. If not, it stays black and about 20 seconds later, it shuts off.
Any Ideas? I read through the majority of the 428+ pages on the ROM but have found nothing. Really like the ROM but having to power on my phone to use it...no beuno.
I'm running the ROM on fe22.
I haven't heard of an issue like that yet. Have you played with the screen settings by any chance? Maybe go in and set to default, worth a shot. Of not that and it were me, Odin back to el29, download the rom again and start fresh.
SENT VIA ICS MIUI ON THE INTERNETS!!!
Yeah, like the poster said above me I would redownload and reflash the ROM. You could have just had a bad flash since I believe your the only person with this issue. Also obviously make sure you do a full wipe before flashing.
Good luck
Running odin now.
Should I find another source for blu kuban or go ahead and try the one on my sd card?
Diffenitely download it again. Could be as simple as a faulty download. Happened to me before as well.
Sent from my Blu Kuban powered Epic (4g lol) Touch
May I enquire as to which version of Blu Kuban you are currently on?
TheTrickyElf said:
May I enquire as to which version of Blu Kuban you are currently on?
Click to expand...
Click to collapse
Who are you asking for a version number? (Since there are several replies)
Sent from my SPH-D710 using XDA
Not currently on Blu Kuban. Don't believe your problem is ROM related tho also.
MoHoGalore said:
Who are you asking for a version number? (Since there are several replies)
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Anyone really.
TheTrickyElf said:
Anyone really.
Click to expand...
Click to collapse
Oh, gotcha. And I've ran the 1.0.3
9 without that particular issue but it seems like there was one that had and suggested a download again to try.
Sent from my SPH-D710 using XDA
abegoods said:
Diffenitely download it again. Could be as simple as a faulty download. Happened to me before as well.
Sent from my Blu Kuban powered Epic (4g lol) Touch
Click to expand...
Click to collapse
I'm running MIUI ICS. Download it again and flash the fresh download. Hopefully that gets it straightened out.
SENT VIA ICS MIUI ON THE INTERNETS!!!
caspersfi said:
Not currently on Blu Kuban. Don't believe your problem is ROM related tho also.
Click to expand...
Click to collapse
I started with an older version of Blu Kuban and it worked flawlessly (screen wise) but my browser wouldn't connect. Online apps worked, but no browser. I started all over with a new version and now the screen is giving me problems.
Any other suggestions?
TheTrickyElf said:
I started with an older version of Blu Kuban and it worked flawlessly (screen wise) but my browser wouldn't connect. Online apps worked, but no browser. I started all over with a new version and now the screen is giving me problems.
Any other suggestions?
Click to expand...
Click to collapse
Delete the old version you have on your sd card so you don't get them confused.
Download the full version of 1.0.4.0 to your computer
http://forum.xda-developers.com/showthread.php?t=1625535
Move it to your sd card.
Make sure you also have Calkulin's format_all on your sd card. It's at the bottom of the OP, in his signature.
http://forum.xda-developers.com/showthread.php?t=1332837
Reboot to recovery.
Make a back up of your current set up.
Flash format_all
Flash the full ROM
Reboot and go to the ROM Updater, grab part 2 from *put things back to stock*
Reboot to recovery
Flash part 2
Reboot and enjoy
TheTrickyElf said:
I started with an older version of Blu Kuban and it worked flawlessly (screen wise) but my browser wouldn't connect. Online apps worked, but no browser. I started all over with a new version and now the screen is giving me problems.
Any other suggestions?
Click to expand...
Click to collapse
Just like we all said. Redownload the ROM do a full wipe and reflash.
Then get back to us.
---------- Post added at 03:25 PM ---------- Previous post was at 03:22 PM ----------
Esoteric68 said:
Download the full version of 1.0.4.0 to your computer, you can find it in the OP of the Blu Kuban thread.
Move it to your sd card.
Make sure you also have Calkulin's format_all on your sd card.
Reboot to recovery.
Make a back up of your current set up.
Flash format_all
Flash the full ROM
Reboot and go to the ROM Updater, grab part 2 from *put things back to stock*
Reboot to recovery
Flash part 2
Reboot and enjoy
Click to expand...
Click to collapse
Nicely said.... I'm just to lazy at the moment to type all that out. lol
Thank u maam.
caspersfi said:
Just like we all said. Redownload the ROM do a full wipe and reflash.
Then get back to us.
---------- Post added at 03:25 PM ---------- Previous post was at 03:22 PM ----------
Nicely said.... I'm just to lazy at the moment to type all that out. lol
Thank u maam.
Click to expand...
Click to collapse
Welcome Sir
caspersfi said:
Nicely said.... I'm just to lazy at the moment to type all that out. lol
Thank u maam.
Click to expand...
Click to collapse
+1
Sent from my SPH-D710 using XDA
I got it. Thank you all. I loved the way it looked and after re installing and deleting over and over I figured I would save some time and ask those who know better.
Once again, I really appreciate you taking the time to answer.
MoHoGalore said:
Oh, gotcha. And I've ran the 1.0.3
9 without that particular issue but it seems like there was one that had and suggested a download again to try.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I had the same issue while running 1.0.4.0, I wiped all, re-flashed and never had the problem again. I am running now 1.0.4.2 congrats guys, great work i love you work. well done.
I like the ROM, but what is the deal with the 4G slow down? My 4G is slower than my 3G now. I am back on Gingerbread now

[MOD] LJ7 Jelly Bean Volume keys to skip tracks & 4-in-1 reboot

Hey guys. Here's the android.policy.jar file that includes the ability to skip tracks when the screen is off with the volume keys along with the 4-in-1 reboot mod.
When I get the time, I will write up a tutorial for devs. Although, you could just decompile the classes.dex and diff the original LJ7 with this one to find out how to do it if you don't want to wait for my instructions. I'm so swamped with other things that I can't quite yet write them.
A few things were changed in Jelly Bean so the original 4-in-1 reboot tutorial won't work unless you change a few things.
PS: this is for deodex roms
freeza said:
Hey guys. Here's the android.policy.jar file that includes the ability to skip tracks when the screen is off with the volume keys along with the 4-in-1 reboot mod.
When I get the time, I will write up a tutorial for devs. Although, you could just decompile the classes.dex and diff the original LJ7 with this one to find out how to do it if you don't want to wait for my instructions. I'm so swamped with other things that I can't quite yet write them.
A few things were changed in Jelly Bean so the original 4-in-1 reboot tutorial won't work unless you change a few things.
Click to expand...
Click to collapse
Thank you freeza, gonna flash this now
Sent from my SPH-L710 using Tapatalk 2
Nice job killen em already.
Good work as always there, its appreciated.
Awesome!!! Freeza is the greatest
I tried the zip. I was stuck at the boot screen did anyone else successful boot up. I waited almost 10 minutes, maybe I got a bad download
Sent from my SPH-L710 using Tapatalk 2
alexnaoumi said:
I tried the zip. I was stuck at the boot screen did anyone else successful boot up. I waited almost 10 minutes, maybe I got a bad download
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Running it on my phone now. But then again it's for deodexed roms...
Ah oh, I'm on deodexed and that happened to mine. I rolled it back and I'm good now.
freeza said:
Running it on my phone now. But then again it's for deodexed roms...
Click to expand...
Click to collapse
i am on deodexed version and mine sticks at samsung screen
freeza said:
Running it on my phone now. But then again it's for deodexed roms...
Click to expand...
Click to collapse
I'm on your lj7 deodex
Sent from my SPH-L710 using Tapatalk 2
Nice work as always bro. Thinking about downloading this just for the 4-1. I don't use the skip track much but it could come in handy.
freeza said:
Running it on my phone now. But then again it's for deodexed roms...
Click to expand...
Click to collapse
Well what if im running a clean rom and im going to install cwm and root later. Once that is done how would I install this mod? And out of curiosity(don't shot me) do all official sprint roms come odexed?
Sent from my SPH-L710 using xda premium
You are the shiet !!!! Exactly what I needed.
Sent from my SPH-L710 using xda app-developers app
Would it be ok if I posted a zip for odex users in this thread?
Kept getting stuck at samsung screen
Sent from my SPH-L710 using xda premium
Wassup feeza ? Is there any chance of getting the camera power button?
Sent from my SPH-L710 using xda premium
Didn't work for me either. Stuck at black screen
Sent from my SPH-L710 using xda app-developers app
---------- Post added at 11:24 PM ---------- Previous post was at 11:13 PM ----------
Do I have to use your specific rom? Deodexed? Thanks in advance
Sent from my SPH-L710 using xda app-developers app
Hmm. how strange.....maybe you need my services.jar too (disable signature checks)
But i'm using it on the standard deodexed LJ7 ROM. I'll include the services.jar in a sec.
EDIT: Can someone try this one real quick?
Might wanna try clearing dalvik after flashing. The system should automatically detect a change and clear it for you, but if you're getting stuck on a black screen, try clearing it manually.
Waiting to see if this will work with sextapes JB tar rooted. I think its odexed since its stock. I injected root through mobile Odin pro
Sent from my SPH-L710 using Tapatalk 2
freeza said:
Hmm. how strange.....maybe you need my services.jar too (disable signature checks)
But i'm using it on the standard deodexed LJ7 ROM. I'll include the services.jar in a sec.
EDIT: Can someone try this one real quick?
Might wanna try clearing dalvik after flashing. The system should automatically detect a change and clear it for you, but if you're getting stuck on a black screen, try clearing it manually.
Click to expand...
Click to collapse
ill try it, i cleared cache and dalvik last time (always do when flashing a zip), ill flash and let you know whats up

I would like some help!?

I have recently purchased a galaxy note 2 and as I was reading the original development forums as a non-member I came across a cyanogen 10.1 port! I flashed this onto my phone along with the gapps for 4.1.2 this caused my phone to boot in and have error messages everywhere and I could not get out of them!!! I am going into panic mode!!! Is there any way to undo what I did?! I have not been able to find a stock rom for ATT that allows for a reset with Odin!? So is there any way to get me out of this predicament!?
mmckenna11 said:
I have recently purchased a galaxy note 2 and as I was reading the original development forums as a non-member I came across a cyanogen 10.1 port! I flashed this onto my phone along with the gapps for 4.1.2 this caused my phone to boot in and have error messages everywhere and I could not get out of them!!! I am going into panic mode!!! Is there any way to undo what I did?! I have not been able to find a stock rom for ATT that allows for a reset with Odin!? So is there any way to get me out of this predicament!?
Click to expand...
Click to collapse
Hit the thanks button on accident. Scott aka scrosler posted a rooted deodexed stock rom with the OTA from yesterday in the development section. Do a clean install and you should be ok.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Can I install this using Odin?
mmckenna11 said:
Can I install this using Odin?
Click to expand...
Click to collapse
Really sounds like you need to stop. Read. Read some more. And then some more. Before you brick your phone. The rom jyazzie mentioned is flashed the same way you put cm10.1 on your phone.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
Really sounds like you need to stop. Read. Read some more. And then some more. Before you brick your phone. The rom jyazzie mentioned is flashed the same way you put cm10.1 on your phone.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
I have read as much as possible! the way I put it was incorrect I have no way of accessing my phone because as soon as I boot up it says there was an error starting gapps then it continues to say this indefinitely... so the only way to install any sort of fix for this would be from my computer!
mmckenna11 said:
I have read as much as possible! the way I put it was incorrect I have no way of accessing my phone because as soon as I boot up it says there was an error starting gapps then it continues to say this indefinitely... so the only way to install any sort of fix for this would be from my computer!
Click to expand...
Click to collapse
Tell me. How did you put cm 10.1 on your device. How did it get there?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
I flashed the .zip in recovery using the Gapps application...
mmckenna11 said:
I flashed the .zip in recovery using the Gapps application...
Click to expand...
Click to collapse
So can you access recovery? Also did you make a backup in recovery before you flashed?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
mmckenna11 said:
I flashed the .zip in recovery using the Gapps application...
Click to expand...
Click to collapse
To flash the rom by scrosler is the exact same way you flashed cm10. Before you do anything I suggest you take a few hours and read this over and over until you know what you are doing.
http://forum.xda-developers.com/showthread.php?t=1987541
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Is there a manual way of accessing recovery? because when I boot into it I use the power, home, volume button way but it only brings me to the stock recovery mode...
mmckenna11 said:
Is there a manual way of accessing recovery? because when I boot into it I use the power, home, volume button way but it only brings me to the stock recovery mode...
Click to expand...
Click to collapse
If you flashed cm 10.1 on your phone there is no way you have a stock recovery. Unless you've done something else that you haven't told us. I think we need more info.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
If you flashed cm 10.1 on your phone there is no way you have a stock recovery. Unless you've done something else that you haven't told us. I think we need more info.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
I have no idea I have the normal recovery that says: DOWNLOADING please do not disconnect from source
mmckenna11 said:
I have no idea I have the normal recovery that says: DOWNLOADING please do not disconnect from source
Click to expand...
Click to collapse
thats not recovery. thats download mode. with the device off use the same button combo but hold volume up instead of volume down.
edit: and busted, you didint do your reading lol.
---------- Post added at 08:42 PM ---------- Previous post was at 08:30 PM ----------
thats ok. life is not over. let us know what you find

[Q] CWM Recovery on i317M

Hi,
I'm having issues installing CWM Recovery on my Rooted GN2. It's the Canadian variant, SGH-I317M.
It does go through the process of flashing the recovery, but never gets to saying PASS in ODIN. When I try to get into the Recovery, it still has the stock Samsung Recovery. It does, however trip the flash counter.
I'm followiing the instructions here: http://forum.xda-developers.com/showthread.php?t=1988785
This is what I get after flashing in ODIN.
Maybe a bad download? Have you checked to see if it installed? I dont usually recommend this but koush's Rom Manager supports our device now, you can use the app to flash it if your already rooted:thumbup:
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
In your screen shot it shows the f-reset box checked I believe it should be unchecked.
Slff said:
In your screen shot it shows the f-reset box checked I believe it should be unchecked.
Click to expand...
Click to collapse
I tried it with the f-reset box unchecked, and I got it to say PASS, but still no CWM...
cdshepherd said:
Maybe a bad download? Have you checked to see if it installed? I dont usually recommend this but koush's Rom Manager supports our device now, you can use the app to flash it if your already rooted:thumbup:
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
I've also tried to download the file again, and still... No dice...
BlueBagodah said:
I tried it with the f-reset box unchecked, and I got it to say PASS, but still no CWM...
I've also tried to download the file again, and still... No dice...
Click to expand...
Click to collapse
Try rom manager?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
Try rom manager?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
ROM Manager doesn't have a Recovery for the Rogers i317M...
http://forum.xda-developers.com/showthread.php?t=1988785
Sent from my SAMSUNG-SGH-I317 using xda premium
twanskys204 said:
http://forum.xda-developers.com/showthread.php?t=1988785
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Thanks,
I've been following that thread, and it doesn't work. It will trip the flash counter, but doesn't actually install the recovery. It appears that I'm not the only one having this issue after the most recent OTA update...
Can u try and flash a kernel
Then try flashing cwm ...just a hunch
Sent from my SAMSUNG-SGH-I317 using xda premium
BlueBagodah said:
Thanks,
I've been following that thread, and it doesn't work. It will trip the flash counter, but doesn't actually install the recovery. It appears that I'm not the only one having this issue after the most recent OTA update...
Click to expand...
Click to collapse
I'm also having problems after the OTA update. Before OTA update, I was able to flash CWM without problems. Following exact same procedure as before when it was working. Only variable that changed is the OTA update.
wiser212 said:
I'm also having problems after the OTA update. Before OTA update, I was able to flash CWM without problems. Following exact same procedure as before when it was working. Only variable that changed is the OTA update.
Click to expand...
Click to collapse
I was able to install CWM by following this post: http://forum.xda-developers.com/showpost.php?p=36201055&postcount=54
But I'm starting to think that it may have been my fault the whole time...
While doing the 3 button combo to try to boot into Recovery, I was using Vol-DOWN, instead of Vol-UP. So I was going into download mode. I'm going to try flashing the CWM through ODIN again and see if I was just an idiot the whole time.
***EDIT***
It looks like I was just an idiot the whole time...
*facepalm*
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
.. so ROM manager doesnt work to insall cwm recovery after rooting on the i317m? i tried it and didnt succeed. i guess flashing is my only option but i dont want to lose anything on my phone. just install the bootloader/ recovery with no other changes. i want to start flashing some roms... jedi first.. skynote after.. any thoughts or help would be great!!
Clean rom I would suggest its awesome battery life I have a universal theme flashed over clean rom and a custom blue keyboard if I find the link to the themes ill post em on here
Sent from my sgh-1317 aka MY BLUE DEVIL using xda premium
Dewaynelives said:
Clean rom I would suggest its awesome battery life I have a universal theme flashed over clean rom and a custom blue keyboard if I find the link to the themes ill post em on here
Sent from my sgh-1317 aka MY BLUE DEVIL using xda premium
Click to expand...
Click to collapse
I thought of cleanROM but it is pretty stock. I feel if im going to flash any rom i might as well go with something modded and tweaked rather then stock, while keeping most of the note 2 and s-pen features. If i start finding them being a little buggy or draining my battery or anything, ill settle with cleanROM and just flash some custom mods.
i flashed my CWM through MobileODIN. worked like a charm. then i ran into issues with backing up to extSD, which ended up working after i formatted it but i took way longer then onto internal SD.
i know its off topic for this thread..Any suggestions or thoughts on the JEDI X9 and SKYNOTE roms will be great guys. Im all backed up and ready to flash pretty quick here.
I guess you have custom ROM. You must root and rename recovery restore files before you boot to android or stock recovery will be restored.

Official CyanogenMod support

Just to let everyone know, the Note 2 LTE (including T-Mobile) will be getting official CyanogenMod 10.1 builds!
Here's the link where the builds will be available: http://get.cm/?device=t0lte
And here's the thread in AT&T forum: http://forum.xda-developers.com/showthread.php?t=2105917
Nice! Thanks for the heads up dude.
This solidifies my belief that the Note 2 is undoubtedly the best phone in the world.
Wow just flashed this and my phone will not boot at all. FML...
Fixed. :thumbup:
Sent from my T989 using xda premium
The only reason I've ever used CyanogenMod on my previous device was because of software issues. To date, I can see no reason for even a custom ROM on my Note II let alone a beta ROM.
Hoezack said:
Wow just flashed this and my phone will not boot at all. FML...
Sent from my T989 using xda premium
Click to expand...
Click to collapse
Did you try this?
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
Click to expand...
Click to collapse
AFTER flashing?
Downloaded and tried to flash via CW three different times and installation aborted each time. I wiped data davlik and cache so I have no clue wtf is wrong but I need that 4.2!!!
I really didn't mean for this thread to become a support thread. If you guys are having problems flashing or booting, you didn't follow the instructions. Re-read all the information and try again following the instructions exactly.
xak944 said:
I really didn't mean for this thread to become a support thread. If you guys are having problems flashing or booting, you didn't follow the instructions. Re-read all the information and try again following the instructions exactly.
Click to expand...
Click to collapse
Been rooting and flashing since the G1 and never had installation abort in the middke of a flash but once. I read the directions and did exactly as posted four times now. Idk what the issue is. I am currently on Jedi X rom. Maybe I should flash stock then retry it?
SinisterSincere said:
Been rooting and flashing since the G1 and never had installation abort in the middke of a flash but once. I read the directions and did exactly as posted four times now. Idk what the issue is. I am currently on Jedi X rom. Maybe I should flash stock then retry it?
Click to expand...
Click to collapse
I'm guessing you didn't follow this step:
madmack said:
- Flash the latest official ClockworkMod-Recovery
Click to expand...
Click to collapse
It's been confirmed working with TWRP
xak944 said:
I'm guessing you didn't follow this step:
Click to expand...
Click to collapse
I know you said you didn't want this thread to turn into a support thread but how do you flash the latest recovery? Through odin or fastboot?
thanks
You don't need cwm I flashed perfectly fine with twrp and have no problems at all haven't tried Bluetooth since I don't use it but it States that it's a bug anyway.
Fandroid93 download goomanager and you can install the latest twrp from there. Or download rommanager and should be able to get cwm from there.
skater4690 said:
You don't need cwm I flashed perfectly fine with twrp and have no problems at all haven't tried Bluetooth since I don't use it but it States that it's a bug anyway.
Fandroid93 download goomanager and you can install the latest twrp from there. Or download rommanager and should be able to get cwm from there.
Click to expand...
Click to collapse
Thanks, I hadn't thought about that lol.
SinisterSincere said:
Downloaded and tried to flash via CW three different times and installation aborted each time. I wiped data davlik and cache so I have no clue wtf is wrong but I need that 4.2!!!
Click to expand...
Click to collapse
What version phone do you have? Some Canadian versions require the updater script to be modified to remove the version checks, everything flashes fine after that and works as normal but they forgot to add the version numbers in the check.
Sent from my GT-N7105 using Tapatalk 2
xak944 said:
I'm guessing you didn't follow this step:
Click to expand...
Click to collapse
Nope have the latest cwm but heard alot of people using twrp had luck so gonna flash that.
---------- Post added at 01:12 AM ---------- Previous post was at 01:06 AM ----------
_Dennis_ said:
What version phone do you have? Some Canadian versions require the updater script to be modified to remove the version checks, everything flashes fine after that and works as normal but they forgot to add the version numbers in the check.
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
TMobile version US
SinisterSincere said:
TMobile version US
Click to expand...
Click to collapse
Bad downloads? Try from your computer.
Sent from my GT-N7105 using Tapatalk 2
I've been a long time cm fan until 4.1 TW. That being said I had to try the official nightly and I gotta say it's real cool. 4.2.1 changes with com's twist is very nice. Dare I say it might even be snappier than stock
Sent from my GIANT internet thingy.
This rom does work with T-mobile note 2 right? Just making sure.
pwner325 said:
This rom does work with T-mobile note 2 right? Just making sure.
Click to expand...
Click to collapse
It does... original development thread has cm 10.1 nighties... few days in now... BT and a few other minor kinks
Sent from my SGH-T889 using xda app-developers app

Categories

Resources