Develop Bugs

Soft bricked while flashing MIUI

So I flashed miui & flashed Chris41g's CWM6 RC13 kernel, both through EL26 CWM. when it booted I kept getting force closes. It kept saying "android.com.process failed" or something like that. Booted back into cwm n reflashed. Same thing happened. So I tried to get back to recovery & it got stuck at the Galaxy S II screen. It still boots to download mode though. Is Odin my only way out of this? Will it even work?
Sent from my DROIDX using xda app-developers app

Honestly if it was me I'd just take a L and one click back to start fresh if that happened
- Sent From My Blu Kuban Themed Tapatalk Like A Boss

Which version of MIUI? If you're flashing Captain Morgans latest build, I believe you have to flash to the build before, mobile Odin/Odin to el26, and then flash the newest build + Chris's Kernel without any wiping. Info is in the OP.
Sent from my Samsung Epic 4G Touch using Tapatalk

MasterZen88 said:
I can confirm this too... Also If anyone is looking to flash this rom please follow these steps. I have repeated the process at least 10 times:
1. Odin EL26 repacked CWM 5
2. Wipe using Calkulin's_FORMAT_ALL.
3. Flash MIUI 2.6.15
4. After flashing let it reboot into MIUI 2.6.15 ** THIS IS VERY IMPORTANT**
5. Then Odin Chris41G AOSP CWM5 or EL26
6. And Finally flash MIUI 2.7.20 v4
Click to expand...
Click to collapse
..

nitro_c4 said:
Originally Posted by MasterZen88
I can confirm this too... Also If anyone is looking to flash this rom please follow these steps. I have repeated the process at least 10 times:
1. Odin EL26 repacked CWM 5
2. Wipe using Calkulin's_FORMAT_ALL.
3. Flash MIUI 2.6.15
4. After flashing let it reboot into MIUI 2.6.15 ** THIS IS VERY IMPORTANT**
5. Then Odin Chris41G AOSP CWM5 or EL26
6. And Finally flash MIUI 2.7.20 v4
Click to expand...
Click to collapse
Yeah I had to do the same thing. So @ChewDZ, basically you are going to have to flash that old one first, and then the new one on top of it as if you were upgrading, otherwise everyone gets that error. And make sure to use the right kernels mentioned above! (Also, I was tempted to just flash the old one and not upgrade, but trust me, the upgraded one has much better stability and battery life.) I have been running it since it was out with almost no issues.

Wow. I saw that no where in the op. Now I'm stuck using my DX until I reach a computer
Sent from my DROIDX using xda app-developers app

Chew DZ said:
Wow. I saw that no where in the op. Now I'm stuck using my DX until I reach a computer
Sent from my DROIDX using xda app-developers app
Click to expand...
Click to collapse
Yeah =/ Unfortunately the OP didn't mention anything about it, so you have to scroll through pages and pages to find it...

2momo123 said:
Yeah =/ Unfortunately the OP didn't mention anything about it, so you have to scroll through pages and pages to find it...
Click to expand...
Click to collapse
It's underlined in the OP
Sent from my Samsung Epic 4G Touch using Tapatalk

No. It isn't. It wasn't in the flashing instructions or anything. That's what pisses me off.
Sent from my DROIDX using xda app-developers app

It's right there and has been for over 2 weeks. Quoted below
Below step 4 - All else failed then try the link at the bottom, I too can confirm this is a most excellent way of getting this to work, thanks MasterZen88.
In bold & underlined at the bottom - If you are having difficulty with this version installation check this post for alternatives methods than stated above.

Jocelyn said:
It's right there and has been for over 2 weeks. Quoted below
Below step 4 - All else failed then try the link at the bottom, I too can confirm this is a most excellent way of getting this to work, thanks MasterZen88.
In bold & underlined at the bottom - If you are having difficulty with this version installation check this post for alternatives methods than stated above.
Click to expand...
Click to collapse
Ahh my bad. I will admit I havn't checked since I flashed it. Been maybe 3 weeks now. Although, instead of saying if you are having issues to check the post, I do think it should just include it in the instructions.

Jocelyn said:
It's right there and has been for over 2 weeks. Quoted below
Below step 4 - All else failed then try the link at the bottom, I too can confirm this is a most excellent way of getting this to work, thanks MasterZen88.
In bold & underlined at the bottom - If you are having difficulty with this version installation check this post for alternatives methods than stated above.
Click to expand...
Click to collapse
What Nitro posted is what isn't in the OP. Why would I immediately go for an alternative installation? My "difficulty installing" soft bricked me. I followed the instructions for flashing & bricked. There's nothing that could've prevented that.
Sent from my DROIDX using xda app-developers app

Chew DZ said:
What Nitro posted is what isn't in the OP. Why would I immediately go for an alternative installation? My "difficulty installing" soft bricked me. I followed the instructions for flashing & bricked. There's nothing that could've prevented that.
Sent from my DROIDX using xda app-developers app
Click to expand...
Click to collapse
I completely agree. It should just be the standard installation instructions, as no one has been successful without doing it this way. It shouldn't be "So now that you tried normally and it screwed up your phone, try it this way." XD They should just tell us to do it that way from the start.
Anyway, have you gotten it working yet?

Thank you, exactly. And yes I just had go Odin back to GB. Now all is well
Sent from my SPH-D710 using xda premium

go to youtube, qbking77 channel, look for his how to unroot video, then look for his how to root video again. maybe now sub and use his tutorials

[LEAK] SGH-I747M - I747MVLALI3 (Bell - BMC) (JB 4.1.1) OTA - 2012.09.11

This is version I747MVLALI3, as opposed to the leak from a couple days ago which was I747MVLALI2c.
Initial impression is that this one is more stable, but I haven't done too much testing yet.
Original OTA ZIP:
http://www.sammobile.com/firmware/?page=3&model=SGH-I747M&pcode=BMC&os=1&type=1#firmware
Modified for easier flashing:
https://hotfile.com/.../d2can_JB_OTA_MVLALI3_keeproot.zip
> MUST be flashed over stock MVLALH1 *** NOT over the previous leaked OTA ***
> will keep your root su binary
> removed the recovery update, so the recovery will remain as whatever you currently have (CWM, etc)
> removed all patch checks so that it will flash even if you are running a modified (eg. some system apps removed) stock MVLALH1
> in other words, you could technically flash this ZIP over any ROM, but unless it's stock or modfied MVLALH1, you will probably end up with bootloops
I flashed this over rooted MVLAH1 using CWM 5.8.4.7 and it worked. Flashing using Mobile Odin should work too. Other methods, I don't know.
Don't blame me if this bricks your phone!

Can this be installed on a stock att phone? Sorry if this is a retarded question but I've been away from the game for a while.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Thanks Radeon_x!! You have done it again. Flashing now on att sgs3.
Sent from mars from my modded sgs3

will wait for you chumps to report the bugs , last one i thought was stable and it crapped out while in the car.

jebise101 said:
will wait for you chumps to report the bugs , last one i thought was stable and it crapped out while in the car.
Click to expand...
Click to collapse
I have been running LI2c on at&t for the last two days and had the only issue was blue screen flickering which was an easy fix.
Ill enjoy this one too!!!
Sent from my SGH-I747M using xda premium

tx3kgtman said:
Can this be installed on a stock att phone? Sorry if this is a retarded question but I've been away from the game for a while.
> in other words, you could technically flash this ZIP over any ROM, but unless it's stock or modfied MVLALH1, you will probably end up with bootloops
---------- Post added at 12:55 AM ---------- Previous post was at 12:53 AM ----------
I am installing Modified for easier flashing:
https://hotfile.com/.../d2can_JB_OTA_MVLALI3_keeproot.zip
right now over stock rooted :good: using CWM ! hope it works! All I did was wipe cache as i had just put the stock rooted rom back on with odin and was already factory!
---------- Post added at 01:12 AM ---------- Previous post was at 12:55 AM ----------
Thanks radeon_x! I am now running this on my bell SGS3!
If anyone wants me to test anything for them , please let me know! thanks:good:
Click to expand...
Click to collapse

jebise101 said:
will wait for you chumps to report the bugs , last one i thought was stable and it crapped out while in the car.
Click to expand...
Click to collapse
Ha ha...I though I was the only one flashing in the car
Sent from my SGH-I747 using xda premium

Keep getting error code 7. Tried flashing from stock, stock rooted any clues? Sure I'm doing something wrong. Thx
Sent from my SGH-I747M using xda app-developers app

Modified for easier flashing:
https://hotfile.com/.../d2can_JB_OTA_MVLALI3_keeproot.zip
I can confirm this does not keep root!!!
I have tried 2 times losing root both times.
EDIT : Was able to get my root access back by flashing CWM SuperSU v 0.96!

Tried to install .. got an error message now the phone won't boot up

dakos666 said:
Keep getting error code 7. Tried flashing from stock, stock rooted any clues? Sure I'm doing something wrong. Thx
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Error code 7 is from using an incorrect version of CWM.
I used the sgs3 toolkit to flash clockworkmod recovery touch and it worked perfectly.
Sent from my SGH-I747M using Tapatalk 2

I'm on TWRP and using mobile Odin select open file choose the file (it will go in OTA) make sure you tick Everroot, Inject Superuser and Inject Mobile Odin.
Worked good for me after reverting to Stock V1.
Edit: Network mode have change now they are, LTE/GSM/WCDMA or GSM Only or WCDMA, I think those are the AT&T settings..How ever I show H+/LTE in the status bar.

oriveradel said:
Ha ha...I though I was the only one flashing in the car
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
You know the cops are gonna find out and your gonna get busted flashing!

Only issue so far is blue screen flickering

stevenca said:
Only issue so far is blue screen flickering
Click to expand...
Click to collapse
Check "Disable hardware overlays" in Developer Options

I've tried flashing CWM, Touch CWM, and TWRP from the newest toolkit (v2.3) and I get error 7 for the first two. What versions of the recovery are people installing to get this to work?
I'm rooted stock IMM76D.1I747MVLALE8

kinghorsey said:
Error code 7 is from using an incorrect version of CWM.
I used the sgs3 toolkit to flash clockworkmod recovery touch and it worked perfectly.
Sent from my SGH-I747M using Tapatalk 2
Click to expand...
Click to collapse
Correct I was usin 6 version, switched to lte version 5.5.x snd worked not problems I also love the favt tha Network mode is there and LTE
Sent from my SGH-I747M using xda premium

I upgraded from last OTA rooted stock : http://forum.xda-developers.com/showthread.php?t=1870795
No problem so far. Thanks!

oriveradel said:
Correct I was usin 6 version, switched to lte version 5.5.x snd worked not problems I also love the favt tha Network mode is there and LTE
Sent from my SGH-I747M using xda premium
Click to expand...
Click to collapse
Well I tried the change to the LTE CWM and still got the Status 7 error. Could be my ROM but I am stock TELUS 4.0.4 but rooted.
Here is what I have if anyone can see why it keeps bombing out?
Baseband version i747mvllh1
Build number imm76d.i747mvlalh1
mike

website says 310 mb but showed up 725 while downloading in Chrome? I stopped it to start again, now I have to wait a half hour -_-

Incremental update for cyanogenmod!

You can now makes incremental update for every build of cyanogen!
Cyandelta downloads only modified files and create a new rom with them by using your old rom file.
So, be sure to have a CM9/10 rom file in your possession first and Cyandelta will determine what kind of updates you want (nightlies, M2, etc.).
It's very pratical when you want to download an update over 3G or 4G, the update varies between 4-20 Mb!
https://play.google.com/store/apps/details?id=com.cyandelta

Looks promising, might try it out.
Thanks for the share.

What recovery are you guys using? I cannot get this to work on the latest CWM.

I'm an idiot please delete this post

micahman said:
CM10 has an updater built in, works great. Go to about phone> Cyanogenmod updates
Click to expand...
Click to collapse
Yea we know that but this is different it only downloads the new part of the next nightly instead of downloading the entire ROM all over again.

Chilled26 said:
What recovery are you guys using? I cannot get this to work on the latest CWM.
Click to expand...
Click to collapse
Don't flash directly via CyanDelta, go directly to recovery and go in the CyanDelta folder to flash it. It's a bug for now. I use CWM 6.0.1.2

Chilled26 said:
Yea we know that but this is different it only downloads the new part of the next nightly instead of downloading the entire ROM all over again.
Click to expand...
Click to collapse
Ohhh okay, sounds interesting thanks for tip. I'll have to check it out. Please forgive my ignorance.

I wish CM would update its camera app.

Is the developer of this app directly associated with CM team?

f2rf2r said:
Is the developer of this app directly associated with CM team?
Click to expand...
Click to collapse
No, but it works pretty well. Like I said, just don't use the install zip button (don't work for now) and flash your rom directly with recovery.

stir fry a lot said:
I wish CM would update its camera app.
Click to expand...
Click to collapse
Amen.

Dont dirty flash nightlys...its always best to do clean flashes...
Sent from my SGH-T999 using xda app-developers app

handman29 said:
Dont dirty flash nightlys...its always best to do clean flashes...
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Not true. Works just fine dirty flashing and its even recommended if you read the CM10 thread.
I've dirty flashed 10/14-10/20 and have used cyan delta from 10/21-10/23. Works just fine for me. Never had an issue with anything. Cyandelta is VERY nice
Sent from my SGH-T999 using Tapatalk 2
---------- Post added at 12:10 AM ---------- Previous post was at 12:08 AM ----------
Max) said:
No, but it works pretty well. Like I said, just don't use the install zip button (don't work for now) and flash your rom directly with recovery.
Click to expand...
Click to collapse
And "install zip" works too
Sent from my SGH-T999 using Tapatalk 2

GalaxyS3Guy said:
Not true. Works just fine dirty flashing and its even recommended if you read the CM10 thread.
I've dirty flashed 10/14-10/20 and have used cyan delta from 10/21-10/23. Works just fine for me. Never had an issue with anything. Cyandelta is VERY nice
Sent from my SGH-T999 using Tapatalk 2
---------- Post added at 12:10 AM ---------- Previous post was at 12:08 AM ----------
And "install zip" works too
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Yeah, in fact, one of the cyan devs was ranting about users who do "unnecessary" things, like clearing the cache(both) or doing full wipes. I'm guessing those things are not required if performing minor updates.
Regarding the issues with flashing in CWM, apparently this is because most versions only allow scripts to be run from RomManager. It should work just fine in TWRP or by manually flashing from the CyanDelta folder.
Just a quick warning for users of the hacked of Google Wallet, this install will remove Google Wallet from your device since it is installed in the system folder. If you use Cyandelta nightly, you will need to reset Wallet before updating and repeat the install with the build.prop edit afterward.

bionic86 said:
Yeah, in fact, one of the cyan devs was ranting about users who do "unnecessary" things, like clearing the cache(both) or doing full wipes. I'm guessing those things are not required if performing minor updates.
Click to expand...
Click to collapse
That's where I got the info...
Sent from my SGH-T999 using Tapatalk 2

bionic86 said:
Yeah, in fact, one of the cyan devs was ranting about users who do "unnecessary" things, like clearing the cache(both) or doing full wipes. I'm guessing those things are not required if performing minor updates.
Regarding the issues with flashing in CWM, apparently this is because most versions only allow scripts to be run from RomManager. It should work just fine in TWRP or by manually flashing from the CyanDelta folder.
Just a quick warning for users of the hacked of Google Wallet, this install will remove Google Wallet from your device since it is installed in the system folder. If you use Cyandelta nightly, you will need to reset Wallet before updating and repeat the install with the build.prop edit afterward.
Click to expand...
Click to collapse
I dont think Cyandelta allow flashing in CWM due to RomManager blocked the auto scripts, i know it's not working for me, anybody?

koolboyztn said:
I dont think Cyandelta allow flashing in CWM due to RomManager blocked the auto scripts, i know it's not working for me, anybody?
Click to expand...
Click to collapse
Use twrp... its better anyways
Sent from my Wicked Galaxy S III

I did but im on Hellfire rom rite now, will give it another try if i flash back to CM10.
Sent from my SGH-T999 using xda premium

New Sprint Galaxy S3 d2spr SPH-L710 (Working CWM/TWRP) Roms Stuck on Splash Screen

Initially had the cant mount problem with CWM:
New recoveries for new phones that won't mount storage!!
http://forum.xda-developers.com/showthread.php?t=2391616
Starting new thread for the other big problem:
After getting either TRRP or CWM on and mounting and backup/restoring properly flashed stable CM10.1 (and a ton of other releases) along with CARBON cannot boot past the Samsung Galaxy SIII splash screen.
What did Sprint do here to screw us out of ditching their stock build?!?!

Most say its the kernel or something about boot images on the aosp ROMs needs to be modified. They way it looks new s3 users are gonna be waiting for a whilr
Sent from my SPH-L710 using XDA Premium 4 mobile app

Figures I had to replace my freshly shattered screen CM7 Evo 4G right in the middle of a code conundrum
Well hopefully the powers that be can update this thread with the progress so we know when we can rock some badass custom roms.

Noobnl posted an experimental fix to try in the new recoveries thread.

kennyglass123 said:
Noobnl posted an experimental fix to try in the new recoveries thread.
Click to expand...
Click to collapse
I flashed it and instead of hanging on the little blue man my phone hung on the black screen. I tried the nightly that a few others had working and I cant even get that one to boot.

I've been able to get several older ROMS to work fine. So long as they are 4.2.1 ROMs there is a chance it will work. I've been unable to get any 4.2.2 or higher ROM to work.
VMU SPH-L710 GS3
JZO54K.L710VPAMG2
Factory 4.1.2 Phone

Do they flash correctly? in CWM or TWRP? Very weird. It's practice to do Factory Reset, Clear Cache, Clear D Cache, Fix Permissions, then install your Rom.
That is what your doing? Then rebooting into it? and you get stuck on black screen?

youngnex said:
Do they flash correctly? in CWM or TWRP? Very weird. It's practice to do Factory Reset, Clear Cache, Clear D Cache, Fix Permissions, then install your Rom.
That is what your doing? Then rebooting into it? and you get stuck on black screen?
Click to expand...
Click to collapse
Correct. Im very familiar with flashing. No dirty flash. I've tried the CWN (fixed one) and TWRP with no joy. Wont even boot enough for me to get a logcat.

Moped_Ryder said:
Correct. Im very familiar with flashing. No dirty flash. I've tried the CWN (fixed one) and TWRP with no joy. Wont even boot enough for me to get a logcat.
Click to expand...
Click to collapse
I am doing the same things and getting the same result. I am seriously considering selling this s3 and buying an older one.

Any progress?
Just checking to see if any progress was made to get past the hanging blue man samsung screen? I would love to put cyanogen 10.2 on my wifes newer gs3. Thanks again.

The newer s3's have a safeguard in place which will not allow you to mount storage in recovery. You need a modded recovery for the newer devices(several threads) and this will allow you to flash Touchwiz ROMs only AOSP ROMs are still not working on these newer devices.
Sent from my SPH-L710 using xda app-developers app
---------- Post added at 11:57 AM ---------- Previous post was at 11:55 AM ----------
Toeonly said:
I am doing the same things and getting the same result. I am seriously considering selling this s3 and buying an older one.
Click to expand...
Click to collapse
There's devs working on a solution, unfortunately this like this take a long time
Sent from my SPH-L710 using xda app-developers app

IDontKnowMang said:
The newer s3's have a safeguard in place which will not allow you to mount storage in recovery. You need a modded recovery for the newer devices(several threads) and this will allow you to flash Touchwiz ROMs only AOSP ROMs are still not working on these newer devices.
Sent from my SPH-L710 using xda app-developers app
---------- Post added at 11:57 AM ---------- Previous post was at 11:55 AM ----------
There's devs working on a solution, unfortunately this like this take a long time
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Since I am fairly new to rooting and flashing roms, was this a similar problem with aosp roms in the past? if so what kind of time table are we looking at?

ijimkoz said:
Since I am fairly new to rooting and flashing roms, was this a similar problem with aosp roms in the past? if so what kind of time table are we looking at?
Click to expand...
Click to collapse
No, this was only with the S3's purchased within the last 2 to 3 months

cm10.2 now working
you should be able to install the latest nightily and it not get stuck on cid, Thanks to Invisiblek he was able to find the problem from my phone, it works now so please give thanks to Invisiblek and all the others who helped.

killernos said:
you should be able to install the latest nightily and it not get stuck on cid, Thanks to Invisiblek he was able to find the problem from my phone, it works now so please give thanks to Invisiblek and all the others who helped.
Click to expand...
Click to collapse
What what what??!!?
What nightly?
Sent from my SPH-L710 using Tapatalk 4

thznutz87 said:
What what what??!!?
What nightly?
Sent from my SPH-L710 using Tapatalk 4
Click to expand...
Click to collapse
Looks like it was!
Starting from 9/22 nightly
https://github.com/CyanogenMod/andr...mmit/b0cd8e73f2c8a34760e3f88843d6a217bd8032c8

CNexus said:
Looks like it was!
Starting from 9/22 nightly
yep it had something to do with the system not wanting to mount.
Click to expand...
Click to collapse

killernos said:
CNexus said:
Looks like it was!
Starting from 9/22 nightly
yep it had something to do with the system not wanting to mount.
Click to expand...
Click to collapse
Yeah, I saw the commit
Click to expand...
Click to collapse

CNexus said:
killernos said:
Yeah, I saw the commit
Click to expand...
Click to collapse
I can confirm its a fix. Very sweet.
Click to expand...
Click to collapse

It's in the kernel
Sent from my SPH-L710 using Tapatalk 4

I installed the xnote rom and no LTE

I installed the xnote rom and I have no LTE on my phone
Sent from my SM-N9005 using XDA Premium 4 mobile app

Gs0230 said:
I installed the xnote rom and I have no LTE on my phone
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Is your APN set proper
TWEAKED 2.0 ELEMENT V3.0 NOTE 3

BACARDILIMON said:
Is your APN set proper
TWEAKED 2.0 ELEMENT V3.0 NOTE 3
Click to expand...
Click to collapse
And if I'm not mistaken you need to flash a kernel..... it's really broad and vague to say I did (...... ) and my (..... ) doesn't work. But more than likely you'll have better results posting in the X-Note section.

drag&fly said:
And if I'm not mistaken you need to flash a kernel..... it's really broad and vague to say I did (...... ) and my (..... ) doesn't work. But more than likely you'll have better results posting in the X-Note section.
Click to expand...
Click to collapse
Yeah I forgot the kernel lol.
TWEAKED 2.0 ELEMENT V3.0 NOTE 3

Hey guys just to make sure. Can we flash international ROMs? If so How? Can someone tell me step by step how it's done? Would like to try out another Rom that isn't tmobile aswell. do I download the ROM and then backup my APN settings. Then delete/factory reset along with wipe cache and dalvik flash ROM then flash tmobile kernel after its done? Any kernel? Right after its installed? I'm saying because can another kernel from a different ROM brick my phone?
Sent from my SM-N900T using Tapatalk

EDIT: Check my next post. I hit a bunch of buttons and posted this by accident.

FiWi said:
I'm going to assume you're not rooted and don't have recovery, if you are, then skip the first two steps.
1. Install CF-Root using ODIN: http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
Click to expand...
Click to collapse
Uhh this helps how? I am rooted and running wicked rom
Sent from my SM-N900T using Tapatalk
---------- Post added at 10:20 PM ---------- Previous post was at 10:14 PM ----------
chuko303 said:
Uhh this helps how? I am rooted and running wicked rom
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Haven't came across something useful
Sent from my SM-N900T using Tapatalk

chuko303 said:
Hey guys just to make sure. Can we flash international ROMs? If so How? Can someone tell me step by step how it's done? Would like to try out another Rom that isn't tmobile aswell. do I download the ROM and then backup my APN settings. Then delete/factory reset along with wipe cache and dalvik flash ROM then flash tmobile kernel after its done? Any kernel? Right after its installed? I'm saying because can another kernel from a different ROM brick my phone?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I'm going to assume you're not rooted and don't have recovery, if you are, then skip the first two steps.
1. Use ODIN or recovery to flash 4.4.2: http://forum.xda-developers.com/showthread.php?t=2671063. You can use the odexed or deodexed version.
2. Install CF-Root using ODIN: http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip (Yes it's for the N9005, but it'll work for our phone too)
3. Install TWRP: http://www.techerrata.com/file/twrp2/hltetmo/openrecovery-twrp-2.7.0.0-hltetmo-4.4.img.tar
4. Go into recovery, do a factory reset & install X-Note. Keep the default CSC. Choose your customizations. Select the option to NOT install any kernel. Let it install. Don't reboot.
5. Flash Wifi/BT fix. It's in the first post: http://forum.xda-developers.com/showthread.php?t=2614772
6. Flash Wootever's kernel: http://forum.xda-developers.com/showthread.php?t=2665661
7. Set up your APN.
That's what I did and everything works.

FiWi said:
I'm going to assume you're not rooted and don't have recovery, if you are, then skip the first two steps.
1. Install CF-Root using ODIN: http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
2. Install TWRP: http://www.techerrata.com/file/twrp2/hltetmo/openrecovery-twrp-2.7.0.0-hltetmo-4.4.img.tar
3. Go into recovery, do a factory reset & install X-Note. Select to option to NOT install any kernel. Let it install. Don't reboot.
4. Flash Wifi/BT fix. It's in the first post: http://forum.xda-developers.com/showthread.php?t=2614772
5. Flash Wootever's kernel: http://forum.xda-developers.com/showthread.php?t=2665661
6. Set up your APN.
That's what I did and everything works.
Click to expand...
Click to collapse
Thank you bro I looked at what rom is xnote and wow it looks SICK SICK SICK. Is this the rom? http://forum.xda-developers.com/showthread.php?t=2472301 I really want to install this Rom now looks amazing a lot of tweaks. One Question I'm still On 4.3 running wicked v5 I should download what you mentioned. I am already rooted with TWRP installed of course. Next I should factory reset/wipe cache/dalvik and install rom when a screen pops up about the kernel I pick no kernel? (Theirs an option for that?) And then let it install (any other option on AROMA I should know to follow correct? Exp: EFS) DONT REBOOT and install fix then mentioned kernel? What version are you running?
Sent from my SM-N900T using Tapatalk

chuko303 said:
Thank you bro I looked at what rom is xnote and wow it looks SICK SICK SICK. Is this the rom? http://forum.xda-developers.com/showthread.php?t=2472301 I really want to install this Rom now looks amazing a lot of tweaks. One Question I'm still On 4.3 running wicked v5 I should download what you mentioned. I am already rooted with TWRP installed of course. Next I should factory reset/wipe cache/dalvik and install rom when a screen pops up about the kernel I pick no kernel? (Theirs an option for that?) And then let it install (any other option on AROMA I should know to follow correct? Exp: EFS) DONT REBOOT and install fix then mentioned kernel? What version are you running?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Oh, if you're still on 4.3, then update to 4.4.2 first! That's really important (X-Note won't install on a 4.3 bootloader). Install either the odexed or deodexed image: http://forum.xda-developers.com/showthread.php?t=2671063, then follow the rest of the steps. I'll update my original post.
EDIT: I'm running version X-Note 11. Version 12 wasn't available when I installed. I don't plan to update though. There's really nothing new and I'm already getting great battery/performance, so I don't see the point messing with a new version.

FiWi said:
Oh, if you're still on 4.3, then update to 4.4.2 first! That's really important (X-Note won't install on a 4.3 bootloader). Install either the odexed or deodexed image: http://forum.xda-developers.com/showthread.php?t=2671063, then follow the rest of the steps. I'll update my original post.
Click to expand...
Click to collapse
So I should odin to 4.4. Everything goes on the AP tab huh? Also the bootloader will flash? Or do I not flash? Idk thanks for your help bro much obliged
Sent from my SM-N900T using Tapatalk

chuko303 said:
So I should odin to 4.4. Everything goes on the AP tab huh? Also the bootloader will flash? Or do I not flash? Idk thanks for your help bro much obliged
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
That's right, everything goes into AP. When you flash the update, it's going to update your bootloader too, which is what you need to do in order to install X-Note.

FiWi said:
That's right, everything goes into AP. When you flash the update, it's going to update your bootloader too, which is what you need to do in order to install X-Note.
Click to expand...
Click to collapse
Thanks so much for your help bro. The first step if I'm correct will basically get me the stock 4.4 ROM with the firmware and all. Unrooted with stock recovery and new bootloader. Second step to root and then flash the recovery through odin both things actually through odin then the following steps. You've been really helpful
Sent from my SM-N900T using Tapatalk