I have recently purchased a galaxy note 2 and as I was reading the original development forums as a non-member I came across a cyanogen 10.1 port! I flashed this onto my phone along with the gapps for 4.1.2 this caused my phone to boot in and have error messages everywhere and I could not get out of them!!! I am going into panic mode!!! Is there any way to undo what I did?! I have not been able to find a stock rom for ATT that allows for a reset with Odin!? So is there any way to get me out of this predicament!?
mmckenna11 said:
I have recently purchased a galaxy note 2 and as I was reading the original development forums as a non-member I came across a cyanogen 10.1 port! I flashed this onto my phone along with the gapps for 4.1.2 this caused my phone to boot in and have error messages everywhere and I could not get out of them!!! I am going into panic mode!!! Is there any way to undo what I did?! I have not been able to find a stock rom for ATT that allows for a reset with Odin!? So is there any way to get me out of this predicament!?
Click to expand...
Click to collapse
Hit the thanks button on accident. Scott aka scrosler posted a rooted deodexed stock rom with the OTA from yesterday in the development section. Do a clean install and you should be ok.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Can I install this using Odin?
mmckenna11 said:
Can I install this using Odin?
Click to expand...
Click to collapse
Really sounds like you need to stop. Read. Read some more. And then some more. Before you brick your phone. The rom jyazzie mentioned is flashed the same way you put cm10.1 on your phone.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
Really sounds like you need to stop. Read. Read some more. And then some more. Before you brick your phone. The rom jyazzie mentioned is flashed the same way you put cm10.1 on your phone.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
I have read as much as possible! the way I put it was incorrect I have no way of accessing my phone because as soon as I boot up it says there was an error starting gapps then it continues to say this indefinitely... so the only way to install any sort of fix for this would be from my computer!
mmckenna11 said:
I have read as much as possible! the way I put it was incorrect I have no way of accessing my phone because as soon as I boot up it says there was an error starting gapps then it continues to say this indefinitely... so the only way to install any sort of fix for this would be from my computer!
Click to expand...
Click to collapse
Tell me. How did you put cm 10.1 on your device. How did it get there?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
I flashed the .zip in recovery using the Gapps application...
mmckenna11 said:
I flashed the .zip in recovery using the Gapps application...
Click to expand...
Click to collapse
So can you access recovery? Also did you make a backup in recovery before you flashed?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
mmckenna11 said:
I flashed the .zip in recovery using the Gapps application...
Click to expand...
Click to collapse
To flash the rom by scrosler is the exact same way you flashed cm10. Before you do anything I suggest you take a few hours and read this over and over until you know what you are doing.
http://forum.xda-developers.com/showthread.php?t=1987541
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Is there a manual way of accessing recovery? because when I boot into it I use the power, home, volume button way but it only brings me to the stock recovery mode...
mmckenna11 said:
Is there a manual way of accessing recovery? because when I boot into it I use the power, home, volume button way but it only brings me to the stock recovery mode...
Click to expand...
Click to collapse
If you flashed cm 10.1 on your phone there is no way you have a stock recovery. Unless you've done something else that you haven't told us. I think we need more info.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
If you flashed cm 10.1 on your phone there is no way you have a stock recovery. Unless you've done something else that you haven't told us. I think we need more info.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
I have no idea I have the normal recovery that says: DOWNLOADING please do not disconnect from source
mmckenna11 said:
I have no idea I have the normal recovery that says: DOWNLOADING please do not disconnect from source
Click to expand...
Click to collapse
thats not recovery. thats download mode. with the device off use the same button combo but hold volume up instead of volume down.
edit: and busted, you didint do your reading lol.
---------- Post added at 08:42 PM ---------- Previous post was at 08:30 PM ----------
thats ok. life is not over. let us know what you find
Related
Though I made the tar.md5 the credit goes to http://forum.xda-developers.com/showthread.php?t=1484304. This is an ODIN flashable version of TWRP 2.2 for the Hercules.
::::::Update:::::::
Goo manager uses the website to host the recovery. The website is down. I will leave the link up until either I'm officially told to take it down or a Moderator locks it.
-Instructions-
1: Reboot to bootloader
2: Open ODIN
3: Select "PDA"
4: Select the "recovery.tar.md5" file.
5: Hit start and let ODIN do it's thing. Your phone will reboot.
As always I'm not responsible for anything that happens to your device. Flashing anything to your phone has it's inherent risks. ODIN can cause severe damage to your device.
Enjoy.
Link recovery.tar.md5 - 6.66 MB
Damn.....where was this last night when I needed it.
Good job. :good:
Lol same here. I used goomanager last night
On a related note: using twrp I couldn't find my old nandroids, I needed to revert to cwmr 6012. What gives?
Sent from my SGH-T989 using xda app-developers app
mettleh3d said:
Lol same here. I used goomanager last night
On a related note: using twrp I couldn't find my old nandroids, I needed to revert to cwmr 6012. What gives?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Hahaha my friend you should of done a little research before you just started flashing recoveries. They are completely different recoveries which means you can not restore a CWM in TWRP or vica versa. Your CWM backups are still in the same place but to restore them you will need to flash back to a CWM recovery...
Hope that helps you out and next time just check your stuff out prior to just flashing away... Safety first :good:
You better back this up somewhere because the developer for this recovery doesnt want any side downloads or so.
DMolina
noodles2224 said:
You better back this up somewhere because the developer for this recovery doesnt want any side downloads or so.
DMolina
Click to expand...
Click to collapse
I was unaware. I will contact them and see if its alright. If its not I'll take down the link. Sorry guys.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
ian577416 said:
I was unaware. I will contact them and see if its alright. If its not I'll take down the link. Sorry guys.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
I for one salute you.
Got my copy and I'm not giving it back!
Panamon said:
I for one salute you.
Got my copy and I'm not giving it back!
Click to expand...
Click to collapse
To be honest I'd forgotten I even opened this thread. I contacted the developers of the recovery and never heard from them so I left it up. You're more than welcome man. I know when I had the T989 this came in handy all the time. Still does for customers phones. Cheers mate!
Sent from my Nexus 4 using Tapatalk 2
Needs to be stickied.
Sent from my SGH-T989 using xda premium
ian577416 said:
To be honest I'd forgotten I even opened this thread. I contacted the developers of the recovery and never heard from them so I left it up. You're more than welcome man. I know when I had the T989 this came in handy all the time. Still does for customers phones. Cheers mate!
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Can you make one updated to 2.3.1.1?
i can not download the file,
i have s4 mini gt i 9192 and it is stuck in team win logo can not see any install back up or wipe screen, can i use your tip to solve it? if so can anybody send me the shared file? download link does not work, pleasee?
i have the same issue on my gt i 9192 with stuck teamwin logo, any tips
LoopDoGG79 said:
Can you make one updated to 2.3.1.1?
Click to expand...
Click to collapse
meeh
TahirBayram said:
i have s4 mini gt i 9192 and it is stuck in team win logo can not see any install back up or wipe screen, can i use your tip to solve it? if so can anybody send me the shared file? download link does not work, pleasee?
Click to expand...
Click to collapse
Are you nuts? You can't use the recovery for the T989 on a GT-9192! You'll brick your phone if you muck up your kernel. Or if you're lucky, you won't brick but the recovery will not boot cuz it's NOT the right one for your device..
I accidently wipe my phones internal storage including backups, Im running latest TWRP and it wont read my sd card. I have a custom rom on the sd card but i cant access via recovery. phone boots to recovery and even download mode but i dont think my usb debug is checked and i cant get thru with odin. Im crunched for time as my wife is coming home in an hour and she will be furious if i bricked my phone i need help restoring before she gets home. thanks.
Heres how I fixed the problem, it was easy after doing but confusing getting there. Since the phone would not boot past the galaxy s3 screen there was no way for me to select USB debugging. That option totally did not allow me to use the Galaxy S3 toolkit listed in android development nor could I select and run any of their lists of "Root" roms because something would happen where ODIN didnt boot it correctly. It ran it at first then "Boot" came on then "Reset" came on then "Pass" came on but nothing ever took. I went to samsung-updates.com selected the ICS factory rom and saved it to desktop. Then I unzipped that rom to unveil the TAR file and flash that via Odin and Bam it ran thru no problems. The problems I ran into earlier were links from other posts and it turned out they were either bad links or not for the phone. I actually tried one guys download link that claimed to be specifically for the T999 us version and it turned out to be for another phone all together Im just lucky that flash didnt brick my device even more. Anyways Odin was my friend it was just a matter of downloading the "Correct" rom. thanks to all that helped I appreciated you all taking the time to answer.
I would download this tool http://forum.xda-developers.com/showthread.php?t=1746682. You should be able to use your PC to flash your Nandroid, although i have never done that.
It doesn't matter if USB debugging is checked if the phone is off.
when i boot to recovery it boots to manual mode anyone know what to do next?
You can flash stuff from your computer in download mode through Odin. I hate doing it myself, but will try to look it up for you
Sent from my SGH-T999 using xda premium
---------- Post added at 07:51 AM ---------- Previous post was at 07:48 AM ----------
http://www.youtube.com/watch?v=-CANyNo5qNE&feature=youtube_gdata_player
Sent from my SGH-T999 using xda premium
---------- Post added at 07:55 AM ---------- Previous post was at 07:51 AM ----------
looks like Odin in download mode is the way to go. Good luck bro
Sent from my SGH-T999 using xda premium
Searching would have solved this problem just odin
Sent from my SGH-T999 using xda app-developers app
when i run in oDin it completes and gives me a pass at the end but the phone never auto reboots even though that option is checked. the phone stays on the galaxy s3 screen and never changes from there.
laraiza said:
when i run in oDin it completes and gives me a pass at the end but the phone never auto reboots even though that option is checked. the phone stays on the galaxy s3 screen and never changes from there.
Click to expand...
Click to collapse
Boot to Recovery and reset factory defaults. That will fix it. It will still "stick" on that screen, but after a couple minutes, it will continue.
Aerowinder said:
Boot to Recovery and reset factory defaults. That will fix it. It will still "stick" on that screen, but after a couple minutes, it will continue.
Click to expand...
Click to collapse
Yup boot into recovery and factory reset. You will be good to go.
Sent from my SGH-T999
ionic7 said:
Searching would have solved this problem just odin
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
chrisram88 said:
Yup boot into recovery and factory reset. You will be good to go.
Sent from my SGH-T999
Click to expand...
Click to collapse
I booted to recovery did a factory reset but it still stayed on the samsung galaxy s3 screen for over fifteen minutes now. I even tried the rom toolbox someone suggested earlier but upon flashing a stock rom it prompts me to check usb debugging and I cant get past that screen.
Stock kernel! That should do the trick! Can't believe I forgot about that. Try that and it will boot up fine.
Sent from my SGH-T999
chrisram88 said:
Stock kernel! That should do the trick! Can't believe I forgot about that. Try that and it will boot up fine.
Sent from my SGH-T999
Click to expand...
Click to collapse
I was running paranoid android prior to this mess and yes your probably right about the kernel but I have downloaded from samsung-updates.com the ics kernel patch but its in a zip folder so i DL winzip to extract it but that doesnt seem to work either. IS there a stock rom download with a kernel i can download and use with odin?
laraiza said:
I was running paranoid android prior to this mess and yes your probably right about the kernel but I have downloaded from samsung-updates.com the ics kernel patch but its in a zip folder so i DL winzip to extract it but that doesnt seem to work either. IS there a stock rom download with a kernel i can download and use with odin?
Click to expand...
Click to collapse
Check the dev section. There should be a thread there with stock rom and kernel flashable thru Odin
Sent from my SGH-T999
chrisram88 said:
Check the dev section. There should be a thread there with stock rom and kernel flashable thru Odin
Sent from my SGH-T999
Click to expand...
Click to collapse
Found a rom and a kernel in the development section and ran it thru odin and it still didnt take. I noticed that the rom flash thru odin only took about two minutes and not once did i see where the modem cycle was being applied. Still no luck for me. Since my phone does not boot pass the galaxy s3 screen is it possible to get the phone to mount via usb cable and copy the roms to internal storage and install via recovery?
Finally got it working again. Thanks to all that helped.
Sent from my SGH-T999 using xda app-developers app
That's great man. You should edit the op with how you did it so in case others have same problem they can fix it.
Sent from my SGH-T999
Sounds good I'll get it done in a few days I'm stuck at work again for now.
Sent from my SGH-T999 using xda app-developers app
I tried to flash the
Liquid JB v2.1 beta2 rom and the gapps jb 20121212-signed package. I used the Unified toolkit to root. It rooted fine. I rebooted in recovery, installed the Liquid rom, then the gapps, then I tried to reboot. Got nothing but a black screen.
Took the battery out, tried the wall charger, USB charger. Nothing works.
Try to Odin back to stock
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Tried that, cant get my computer to recoginize the phone. The screen is pitch black like there is no power.
Wado1 said:
Tried that, cant get my computer to recoginize the phone. The screen is pitch black like there is no power.
Click to expand...
Click to collapse
What did you use to flash your ROM. Bottom line is you need to try to get into download mode. I believe the key combo is hold down power + volume down + home. If that boots you into download mode just flash back to stock.
Sent from my SAMSUNG-SGH-I747 using xda premium
I used the 7.0 Toolkit to flash my ROM, I've been trying to get into download mode for hours with no luck.
Wado1 said:
I used the 7.0 Toolkit to flash my ROM, I've been trying to get into download mode for hours with no luck.
Click to expand...
Click to collapse
Post the link where you got the 7.0 toolkit and the link where you downloaded the ROM.
Sent from my SAMSUNG-SGH-I747 using xda premium
Toolkit: http://goo.im/devs/mskip/toolkit/samsung_galaxy_s3/Samsung_Galaxy_S3_ToolKit_v7.0.exe
Rom: http://goo.im/devs/liquidsmooth/4.2.1/Beta2/Liquid-JB-v2.1-Beta2-endeavoru.zip
I got them both from there respective links in the ATT S3 Forums.
CRAPPPPPPPP, I see what I did. I should have flashed d2att. Damn. I flashed the newest because I thought they were nightlies.
Is there anyway to unbrick it besides doing the jtag?
Wado1 said:
Is there anyway to unbrick it besides doing the jtag?
Click to expand...
Click to collapse
Not likely. JTAG will probably be the only option.
Sent from my SAMSUNG-SGH-I747 using xda premium
Wado1 said:
Is there anyway to unbrick it besides doing the jtag?
Click to expand...
Click to collapse
You didn't make a backup before flashing?.. Can you get the phone into recovery?
I made a nandroid backup and thats on the SD card but I can't get into download or recovery. All I get is a black screen no matter what I press or do.
Wado1 said:
Toolkit: http://goo.im/devs/mskip/toolkit/samsung_galaxy_s3/Samsung_Galaxy_S3_ToolKit_v7.0.exe
Rom: http://goo.im/devs/liquidsmooth/4.2.1/Beta2/Liquid-JB-v2.1-Beta2-endeavoru.zip
I got them both from there respective links in the ATT S3 Forums.
CRAPPPPPPPP, I see what I did. I should have flashed d2att. Damn. I flashed the newest because I thought they were nightlies.
Click to expand...
Click to collapse
Looks like you're most likely hard bricked. That's an HTC One X ROM. Looking at the installer script, it uses mount points that don't match the d2att. It writes the system files to mmcblk0p12, which is the modem on our phone. Also, it writes the kernel to mmcblk0p4, which is also incorrect (I think it's for boot screen images?). Sorry.
Wado unfortunately I've hard bricked two S3's so I know how you feel it's a sinking feeling indeed. I have learned from my foolish mistakes though. I feel for you man.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
att service can fix bricked phone
The guy's at my AT&T service shop have a program they claim that will fix bricked phones they used it on mine to fix a sound issue
Where you able to get it fixed?
Sent from my Nexus 7 using Tapatalk HD
i am a new rooter and somehow wiped everything with twrp. im stuck at samsung galaxy s 111 screen, or i can boot into twrp. but theres nothing to restore. can someone help me?
balibalistic said:
i am a new rooter and somehow wiped everything with twrp. im stuck at samsung galaxy s 111 screen, or i can boot into twrp. but theres nothing to restore. can someone help me?
Click to expand...
Click to collapse
Easiest thing would be to put a ROM on an SD card and flash it in recovery.
Other option is to Odin back to stock in download.
Edit.....
For future reference here is task's full wipe video to avoid wiping something by accident.
https://www.youtube.com/watch?v=6dYSumHaxwI&feature=youtube_gdata_player
Also please remember to flash and wipe exactly as instructed in the ROM thread
Sent from my SGH-I747 using xda app-developers app
My computers will not recognize the phone now
With your ROM being wiped your computer won't recognize your phone unless you are in download mode using Odin to go back to stock.
If you don't have a SD card adapter to put in your computer to put a rom on you'll have to Odin back to stock.
Sent from my SGH-I747 using xda app-developers app
ok, thank you. o i just google.., odin back to stock i suppose?
balibalistic said:
ok, thank you. o i just google.., odin back to stock i suppose?
Click to expand...
Click to collapse
I don't know what carrier you are on but use this guide to download the proper stock (unrooted, you'll need to re-root) ROM for your specific carrier.
All the tools and instructions you need are on this site. Unsure how to use Odin? Try a youtube search for your carrier and model.
http://forum.xda-developers.com/showthread.php?p=28019751
Sent from my SGH-I747 using xda app-developers app
ok, ive got an external sd. anyone interested in helping me step by step install cm10? on here or i will call ya.please
im in rogers (at&t galaxy s3 1747)
ok, so anything i try to load on just fails..., i have no idea why?
well i installed untimatum and now im in a boot loop.man do i suck.
balibalistic said:
ok, so anything i try to load on just fails..., i have no idea why?
Click to expand...
Click to collapse
Define fails?
Sent from my SGH-I747 using xda app-developers app
the word FAILED pops up in red letters immediatly after i swype the bar.
balibalistic said:
well i installed untimatum and now im in a boot loop.man do i suck.
Click to expand...
Click to collapse
I find that if you successfully flash a ROM and get stuck in a boot loop to reboot into recovery and factory reset. Seems to work.
Sent from my SGH-I747 using xda app-developers app
nope, still looping unfortunatly.
Any old nandroids saved?
Happen to flash a 4.2.1 build lately? Or were you basically stock?
Sent from my SGH-I747 using xda app-developers app
balibalistic said:
nope, still looping unfortunatly.
Click to expand...
Click to collapse
Did you ever consider to get back to stock and start from scrach? If you to try this metod.
would i just try to install that like a rom? ive installed three now successfully, but all boot loop.
i just want to get this damn phone working.., on anything
balibalistic said:
i just want to get this damn phone working.., on anything
Click to expand...
Click to collapse
i will paypal anyone $20 to help me get this thing running cm10.., honestly :good:
I hope that you are wiping data, ext, cache, and dalvik-cache before flashing any new Roms.
Sent from my SAMSUNG-SGH-I747 using xda premium
balibalistic said:
i will paypal anyone $20 to help me get this thing running cm10.., honestly :good:
Click to expand...
Click to collapse
Did you try and follow his link? http://forum.xda-developers.com/showthread.php?t=1984717
Flashing stock is pretty much your only option. From there, you can flash a custom recovery and then CM10.
HELP!! I think i bricked my AT&T Canadian Note 2 with 16gb rooted with stock rom and stock kernel
SO i was playing dead trigger and wanted to gave tegra 3 optimizations so i downloaded Chainfire 3D from the play store and i installed the drivers and it rebooted my note 2, but it's stuck at the Galaxy Note 2 logo!! I can still use vol up+home+power and vol down+home+power, i tried factory reset in CWM, still stuck, tried flashing new rom (CM, AOKP) still stuck, so now i just want my phone back up and running again. Anyone know how to fix it problem? I don't need any apps or data back or root back, just back up and running again. Oh and charging still shows the battery picture, and i can still turn off my phone.
Odin factory stock. Should fix it right up.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
pestilencec11 said:
Odin factory stock. Should fix it right up.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
Thing is im kinda new to android so i dont know what most of this stuff is, but i own a mac if that's gonna make a difference.
There is a guide section in the general and the Development sections. Go by there and have a look. 20 mins or less and you can be up and running stock
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
pestilencec11 said:
There is a guide section in the general and the Development sections. Go by here and have a look. 20 mins or less and you can be up and running stock
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
Can you send me a link to it? thanks
I should have never rooted
help
C00lBeanz said:
help
Click to expand...
Click to collapse
Have you tried a factory reset?
Another thing hopefully you made a back up!
Sup you can have something to fall back on!:thumbup:
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Bajanman said:
Have you tried a factory reset?
Another thing hopefully you made a back up!
Sup you can have something to fall back on!:thumbup:
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Click to expand...
Click to collapse
Unfortunately no for some reason titanium backup didnt work for me
C00lBeanz said:
Unfortunately no for some reason titanium backup didnt work for me
Click to expand...
Click to collapse
Ok your going about this all wrong! Titanium isn't going to fix all your problem's!!
You need to reboot into recovery and perform a factory reset! All the instructions are on the all in one thread!
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
C00lBeanz said:
Unfortunately no for some reason titanium backup didnt work for me
Click to expand...
Click to collapse
When u do a backup u should be using a recovery. For example CW or TWRP2.
Sent from the TermiNOTEr 2!
Don't feed the troll.
Sent from my SAMSUNG-SGH-I317 using xda premium
borijess said:
When u do a backup u should be using a recovery. For example CW or TWRP2.
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
I tried using CWM recovery but it says error
Why do so many people on xda have such a hard time understanding what "bricked" means.
If you can easily fix it, then it isn't "bricked"
It's bricked if it has to go for jtag
If you read the description for chainfire 3d, it distinctly says "not compatible with ICS/Jellybean" so theres your problem why u have troubles... a factory reset might not be the fix. ODIN may be the only way.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Flash a kernel.. Then rom... U should be fine
borijess said:
When u do a backup u should be using a recovery. For example CW or TWRP2.
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
This here^^^^^^^^^^^^^^^^^^^^
C00lBeanz said:
I tried using CWM recovery but it says error
Click to expand...
Click to collapse
Then check HERE:
http://forum.xda-developers.com/showthread.php?p=867032
crixley said:
Why do so many people on xda have such a hard time understanding what "bricked" means.
If you can easily fix it, then it isn't "bricked"
It's bricked if it has to go for jtag
Click to expand...
Click to collapse
+1
Yeah it's because they can't get the phone to come back on. So that's why they think it's bricked. Plus it's the only word they know and heard of. There's also soft brick, stuck in a loop, etc. But most of the time when the phone stops working correctly, most thinks it's bricked! Lol
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Bajanman said:
This here^^^^^^^^^^^^^^^^^^^^
Then check HERE:
http://forum.xda-developers.com/showthread.php?p=867032
+1
Yeah it's because they can't get the phone to come back on. So that's why they think it's bricked. Plus it's the only word they know and heard of. There's also soft brick, stuck in a loop, etc. But most of the time when the phone stops working correctly, most thinks it's bricked! Lol
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Click to expand...
Click to collapse
For me, even "soft brick" is a stupid term..
A phone is either bricked or not bricked. If it is bricked, there is no fixing it imo (other than jtag)
Odin will fix this, this happened to my S2 while I'm on JB. Just download the latest odin, and the stock rom of your Note 2, probably you can find the rom on sammobile, google will help you out, PM me if you need any assistance. Just relax, it's not broken.
crixley said:
For me, even "soft brick" is a stupid term..
A phone is either bricked or not bricked. If it is bricked, there is no fixing it imo (other than jtag)
Click to expand...
Click to collapse
Lol
arkin56 said:
Odin will fix this, this happened to my S2 while I'm on JB. Just download the latest odin, and the stock rom of your Note 2, probably you can find the rom on sammobile, google will help you out, PM me if you need any assistance. Just relax, it's not broken.
Click to expand...
Click to collapse
You know when it's someone new they freak out, when there device isn't working the way it was! Before THEY did what they did to it!
Me 2¢®
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
arkin56 said:
Odin will fix this, this happened to my S2 while I'm on JB. Just download the latest odin, and the stock rom of your Note 2, probably you can find the rom on sammobile, google will help you out, PM me if you need any assistance. Just relax, it's not broken.
Click to expand...
Click to collapse
Ok so I need 4.1.2 of Jellybean, I still don't know what Odin is though
Anyways, i tried factory reset too and it seems like nothing happened