Related
Hi Everyone,
My Phone:
Lt15i
Baseband 70
Stock kernel with CWM
Arconium ICS
My Problem:
After going to a custom rom and kernel from a complete stock setup I cannot get a data conection on my phone. All other features work perfectly (Call, sms, wifi etc) just no 3g/2g data connection, or icon in the status bar. the Settings menu indicates it is turned on.
I have exhausted all available options regarding kernel/rom troubleshooting including a complete reinstall on the above rom/kernel. I also experienced this problem with other roms and kernels.
During setup I follow the setup app and download the apn settings for Crazy Johns (my carrier) and they report as being installed.
My question:
If anyone who is using Crazy Johns currently and has it working could please post their apn settings (text or screen shot whatever is easier) so I can compare these to mine and change as necessary.
Any and all suggestions for fixing this are welcome.
ajgftw said:
Hi Everyone,
My Phone:
Lt15i
Baseband 70
Stock kernel with CWM
Arconium ICS
My Problem:
After going to a custom rom and kernel from a complete stock setup I cannot get a data conection on my phone. All other features work perfectly (Call, sms, wifi etc) just no 3g/2g data connection, or icon in the status bar. the Settings menu indicates it is turned on.
I have exhausted all available options regarding kernel/rom troubleshooting including a complete reinstall on the above rom/kernel. I also experienced this problem with other roms and kernels.
During setup I follow the setup app and download the apn settings for Crazy Johns (my carrier) and they report as being installed.
My question:
If anyone who is using Crazy Johns currently and has it working could please post their apn settings (text or screen shot whatever is easier) so I can compare these to mine and change as necessary.
Any and all suggestions for fixing this are welcome.
Click to expand...
Click to collapse
tried hitting up there web site and getting them sent to your device manualy?
PVy.
pvyParts said:
tried hitting up there web site and getting them sent to your device manualy?
PVy.
Click to expand...
Click to collapse
Yeah, tried getting it sent to me, entering it in manually, even tried entering various variations of it I had found on the net. Still no connection.
Everything worked perfectly when it was stock, and when i first flashed a new rom onto the phone (arconium 8.2 i think) it worked then too. but every rom since it hasn't.
I'm still quite new to this and my knowledge isnt too deep yet.
Could flashing roms or kernels effect the serial numbers of my phone or something and now my carrier doesn't recognize my phone?
I do still receive calls and sms...
It's got me beat!
ajgftw said:
Yeah, tried getting it sent to me, entering it in manually, even tried entering various variations of it I had found on the net. Still no connection.
Everything worked perfectly when it was stock, and when i first flashed a new rom onto the phone (arconium 8.2 i think) it worked then too. but every rom since it hasn't.
I'm still quite new to this and my knowledge isnt too deep yet.
Could flashing roms or kernels effect the serial numbers of my phone or something and now my carrier doesn't recognize my phone?
I do still receive calls and sms...
It's got me beat!
Click to expand...
Click to collapse
Hmmm I think you phone is fine must be just the settings.
What does it say? Any errors? Can you grab a log too see if it says something there. Check my Sig for how to get logs etc.
Pvy
Sent from my LT18i using xda premium
Solved....Hopefully.
pvyParts said:
Hmmm I think you phone is fine must be just the settings.
What does it say? Any errors? Can you grab a log too see if it says something there. Check my Sig for how to get logs etc.
Pvy
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
Well props to you, you were right in suggesting it was settings related. I tried a different sim card from a different carrier and after following the setup procedure I had a 3g data connection. This of course means the problem lies with my sim card/carrier settings and not the rom or kernel.
This thread is a place for people to ask questions and get answers about CM 10.1 Nighty and Official when it comes out. This thread is the proper place for these kind of questions for now.
Link to CM 10.1 Nightly
http://jenkinsmanifest.clockworkmod.com/device/d2att/all
CM 10.1 Changelog credit lisek99
http://10.1.cmxlog.com/?device=d2att
4.2 GAPPS Credit Mike Ramsay
http://goo.im/devs/itsmikeramsay/gapps-jb-20121212-signed.zip
Ktoonsez 4.2 Kernel
http://forum.xda-developers.com/showthread.php?t=1871946
CyanogenMod's Progress
http://review.cyanogenmod.org/#/q/status:merged,n,z
itsmikeramsay's rendition of CM 10.1
http://forum.xda-developers.com/showthread.php?t=2039995
It has "..a few cherry-picks. We're shooting for that sweet spot between CM10.1 and AOKP."
Euroskank CM 10.1 kang d2att
http://forum.xda-developers.com/showthread.php?t=1806921
has cherry picks as well
Common Flash Process
1. wipe cache/dalvik
2. wipe system
3. factory reset
4. wipe data
5. TWRP users wipe internal-wipes internal data that could corrupt something
6. flash rom
7. flash gapps
Do this if you have any unexpected problems.
If you want flash ktoonsez kernel but if you have problems follow the flashing procedure before posting about problems/questions
Possible Data Fix
Alright, for anyone having issues with the CM10.1 "pre-release" builds (official or otherwise) not allowing you to keep a connection, here's how to fix it:
Download one of the modem files for your device (read!) in the OP of the modem thread. Any of the options will work, pick the one you want.
Keep that ZIP on your EXTERNAL storage. You need to be able to find it from CWM/TWRP.
With CM10.1 running, disable data from System Settings > "More..." (under Data Usage) > Mobile Networks > "Data enabled" (uncheck it)
Reboot into recovery. (Long-press Power, "Reboot", "Recovery", [OK])
Flash the modem from step 1.
Clear Cache and Dalvik Cache.
Reboot back into CM10.1.
Wait 30 seconds!
Enable data from System Settings > "More..." (under Data Usage) > Mobile Networks > "Data enabled" (check it).
You should have data within 10-20 seconds!
If this doesn't work, you might need to reset your APNs to default. This will only happen if you make changes to your APNs, so go into the APN list and press the menu key and hit "Reset to defaults". Then start over at step 1.
To prevent this problem, you should disable data before shutting off your device. You can enable it 30 seconds after boot and it should work again. If you get stuck in the "disconnect-loop", repeat these steps.
Themes
Sense 4 10.1 theme (might work for other roms)
http://forum.xda-developers.com/showthread.php?t=2051326
My dataaa, oh my dataaaa.
I almost have everything working, however I can't seem to get my 4G data to work.
khep24 said:
I almost have everything working, however I can't seem to get my 4G data to work.
Click to expand...
Click to collapse
1) Do you mean LTE, HSPA(+), or something else? HSPA(+) doesn't seem to work very well under 4.2 conditions.
2) Who's your carrier?
smelenchuk said:
1) Do you mean LTE, HSPA(+), or something else? HSPA(+) doesn't seem to work very well under 4.2 conditions.
2) Who's your carrier?
Click to expand...
Click to collapse
I'm sorry for being vague I thought this whole thread was just for GS3 AT&T version, but LTE data for AT&T. Thanks
khep24 said:
I'm sorry for being vague I thought this whole thread was just for GS3 AT&T version, but LTE data for AT&T. Thanks
Click to expand...
Click to collapse
The same model of phone (well, more or less) is used for several Canadian carriers, which is why I'm asking.
Just to confirm: are you getting a data connection on something other than LTE? If so, that narrows down the number of things that could be wrong - my two immediate guesses would be that you have the wrong APN set or you have the wrong network type set in either Settings -> More -> Mobile Networks or in the Phone Info menu you can get by dialing *#*#4636#*#* (these are both known to happen immediately after flashing something).
smelenchuk said:
The same model of phone (well, more or less) is used for several Canadian carriers, which is why I'm asking.
Just to confirm: are you getting a data connection on something other than LTE? If so, that narrows down the number of things that could be wrong - my two immediate guesses would be that you have the wrong APN set or you have the wrong network type set in either Settings -> More -> Mobile Networks or in the Phone Info menu you can get by dialing *#*#4636#*#* (these are both known to happen immediately after flashing something).
Click to expand...
Click to collapse
There it goes , that did the trick thanks for the help. Now my GS3 is working perfectly with the update.
Are you getting a 4G logo on your bar? I cannot get anything but 3g,H, and H+. Mobile network setting set to LTE/GSM/WCDMA. any help would be nice, I seem to mainly get H+ and sometime switches to 3G.
Using ATT carrier.
Sent from my Nexus 7
sliverboyx2002 said:
Are you getting a 4G logo on your bar? I cannot get anything but 3g,H, and H+. Mobile network setting set to LTE/GSM/WCDMA. any help would be nice, I seem to mainly get H+ and sometime switches to 3G.
Using ATT carrier.
Sent from my Nexus 7
Click to expand...
Click to collapse
I'm going to offer the same suggestions: check your APN settings (that seems to be the big one for AT&T) and check your network types.
I assume you've had LTE coverage under other ROMs?
Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium
Everything installs fine,....but the google play store gives me a "no connection" error....but browsing the internet works fine. I followed all the steps exactly.
zap12341 said:
Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Are no files displayed at all or is it just displaying differently? Once I updated, it moved all my files to the folder/0. Check there and it should display your folders as on 4.1. I believe it has to do with the multiple user functionality.
Sent from my Nexus 7 using xda app-developers app
When I flashed it, it didn't create a /0 for me.
Sent from my SGH-I747 using xda premium
zap12341 said:
When I flashed it, it didn't create a /0 for me.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
I can't see any folders either. Same ROM.
Sent from my SAMSUNG-SGH-I747 using xda premium
zap12341 said:
Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Its a preview. Its not supposed to work. The preview I released is basically just a screenshot of what's to come. I haven't even release a full ROM yet.
Emoticons
The emoticons are now implemented in the keyboard, is there a way to flash em over or download em. If anyone else has this issue let me know.
I can't get Portable Wi-Fi hotspot to work?
any ideas, has anyone else tried it?
is there a way to submit bug reports for nightly builds?
no data connection at all now via the radio.(but the phone can receive & make calls) I followed the steps to check it as posted by another user above....but still tryin different modem files.
did you try the fix in the op?
CM10.1 on Bell Galaxy SIII
I installed CM10.1 yesterday. Most of it works flawlessly. Had to uninstall and reinstall some apps (Google Play Magazines) for example. But almost all of them work as is.
I do have a problem with cell data connectivity. I need to reboot a couple of time to make it work. When it does, it works flawlessly. But when it doesn't there's nothing you can do. And it's random. You reboot, it may or may not work. If it doesn't, you reboot until it does. I also didn't have H+. I changed my baseband version and I now have H+.
This very much like a limit condition on init sequence. It was working with CM10 so I guess the components initialization sequence changed a bit for CM10.1.
wujiku said:
did you try the fix in the op?
Click to expand...
Click to collapse
Ya that's what I've been working on. I finally did get it working (for now) with the modem 3rd down on the list.
Does CM10.1 have a LTE icon that appears when LTE is being used, or does it always just say "4G"?
---------- Post added at 06:48 PM ---------- Previous post was at 06:39 PM ----------
ebfortin said:
I installed CM10.1 yesterday. Most of it works flawlessly. Had to uninstall and reinstall some apps (Google Play Magazines) for example. But almost all of them work as is.
I do have a problem with cell data connectivity. I need to reboot a couple of time to make it work. When it does, it works flawlessly. But when it doesn't there's nothing you can do. And it's random. You reboot, it may or may not work. If it doesn't, you reboot until it does. I also didn't have H+. I changed my baseband version and I now have H+.
This very much like a limit condition on init sequence. It was working with CM10 so I guess the components initialization sequence changed a bit for CM10.1.
Click to expand...
Click to collapse
This is getting to be my experience. I just tried a few different modems, and finally got it to work...then I decided to reboot...and it stopped working. A few reboots later, and it still is down for the count. I guess I'll try another modem.
Hi there. My device is a i747 on Virgin Mobile (Bell) in Canada. I have no service, or 1 bar of signal (can't make calls at all).
I flashed CM10 in November. Then just the other day I flashed Synergy. Then switched to Galaxy Mod. (I followed instructions for each flash, wiped everything each time etc. even when not specified in the instructions)
Today I switched to CyanogenMod 10.1, I got stuck in a boot loop. So I reflashed back to a stock root image with Odin (root66.stock_Bell_I747MVLALH1.tar). Now I have no service! I can see one signal bar. Under status it says VIRGIN.
EDIT: Now after I typed that, I reflashed another rooted stock image, I have no service at all and IMEI shows as 0.
EDIT: Since posting I have restored my IMEI, the phone seems to be registered on the network. But still no signal just like before
EDIT: March 16: I have tried flashing modems. Then I restored to the latest actual stock (non-rooted) image from my carrier. Same thing.
Please help me out, thanks
flyingpants said:
Hi there. My device is a i747 on Virgin Mobile (Bell) in Canada. I have no service, or 1 bar of signal (can't make calls at all).
I flashed CM10 in November. Then just the other day I flashed Synergy. Then switched to Galaxy Mod. (I followed instructions for each flash, wiped everything each time etc. even when not specified in the instructions)
Today I switched to CyanogenMod 10.1, I got stuck in a boot loop. So I reflashed back to a stock root image with Odin (root66.stock_Bell_I747MVLALH1.tar). Now I have no service! I can see one signal bar. Under status it says VIRGIN.
EDIT: Now after I typed that, I reflashed another rooted stock image, I have no service at all and IMEI shows as 0.
EDIT: Since posting I have restored my IMEI, the phone seems to be registered on the network. But still no signal just like before
Please help me out, thanks
Click to expand...
Click to collapse
After restoring your imei make sure your apn settings are correct.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
After restoring your imei make sure your apn settings are correct.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Hello.
I just travelled by train and it picked up signals, both voice and data. Possibly because i was passing close to a cell tower. But it quickly stopped working whenever the train moved too far from a cell tower.
Then back to no signal at all.
Will check APNs, but I don't think it would start working then stop if it were a configuration issue.
flyingpants said:
Hello.
I just travelled by train and it picked up signals, both voice and data. Possibly because i was passing close to a cell tower. But it quickly stopped working whenever the train moved too far from a cell tower.
Then back to no signal at all.
Will check APNs, but I don't think it would start working then stop if it were a configuration issue.
Click to expand...
Click to collapse
That sounds like a modem issue.
BWolf56 said:
That sounds like a modem issue.
Click to expand...
Click to collapse
Yes, the modem is not working properly. Should I flash another modem or what? Thanks.
APN is set correctly.
flyingpants said:
Yes, the modem is not working properly. Should I flash another modem or what? Thanks.
APN is set correctly.
Click to expand...
Click to collapse
Yeah, sorry wasn't all too clear. I replied in a rush.
Go in the modem thread and look for modems for your carrier and start by flashing their latest.
BWolf56 said:
Yeah, sorry wasn't all too clear. I replied in a rush.
Go in the modem thread and look for modems for your carrier and start by flashing their latest.
Click to expand...
Click to collapse
Hi there, what do you mean by "the modem thread"? I looked around a bit but I cant find it.
flyingpants said:
Hi there, what do you mean by "the modem thread"? I looked around a bit but I cant find it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1831898
BWolf56 said:
http://forum.xda-developers.com/showthread.php?t=1831898
Click to expand...
Click to collapse
I tried the latest modem for i747M from the thread and it didn't work, same stuff is happening. I will keep trying them. Anything else I can try if that doesn't work?
flyingpants said:
I tried the latest modem for i747M from the thread and it didn't work, same stuff is happening. I will keep trying them. Anything else I can try if that doesn't work?
Click to expand...
Click to collapse
I tried about 4-5 so far. Didn't work. It's the same result. I'm not able to make any calls, it either shows 1 bar or No service.
So far I have set APNs, updated IMEI, and reflashed modems. When I get home I'm going to try more stuff.
BWolf56 said:
Yeah, sorry wasn't all too clear. I replied in a rush.
Go in the modem thread and look for modems for your carrier and start by flashing their latest.
Click to expand...
Click to collapse
flyingpants said:
I tried the latest modem for i747M from the thread and it didn't work, same stuff is happening. I will keep trying them. Anything else I can try if that doesn't work?
Click to expand...
Click to collapse
flyingpants said:
I tried about 4-5 so far. Didn't work. It's the same result. I'm not able to make any calls, it either shows 1 bar or No service.
So far I have set APNs, updated IMEI, and reflashed modems. When I get home I'm going to try more stuff.
Click to expand...
Click to collapse
Hi there, I just flashed this file from Samsung-updates.com using Odin. It is 4.1.1 from my carrier.
KIES_HOME_I747MVLDLK4_I747MOYCDLK4_538866_REV04_user_low_ship.tar.md5
Then I did a factory reset from inside Touchwiz. What should I try next?
I tried flashing another image: KIES_HOME_I747MVLALE8_I747MOYCALE8_20120523.225040_REV04_user_low_ship.tar.md5
and doing the factory reset code *2767*3855#. Didn't work, still have no signal in general.
I've flashed Xperia Z Jelly Bean v4 (this one http://forum.xda-developers.com/showthread.php?t=2267230&highlight=data) on my Arc S and I can say its so fast and so beautiful.
The only problem I have is that I cant connect to mobile data 3G however my APN settings are correct
I flashed BB-77 too as recommended by one of the users in the thread and it didnt work as well
So what should I do now ?
Thanks
Were you able to use the 3G connection before this ROM?
My current advice - Ask from your operator, if the 3G connection is enabled for you.
Someguyfromhell said:
Were you able to use the 3G connection before this ROM?
My current advice - Ask from your operator, if the 3G connection is enabled for you.
Click to expand...
Click to collapse
Are you sure you have "Data enabled"? Try to reboot your phone.
Someguyfromhell said:
Were you able to use the 3G connection before this ROM?
My current advice - Ask from your operator, if the 3G connection is enabled for you.
Click to expand...
Click to collapse
Yes I was able to use 3G before this ROM and i contacted my operator and 3G is enabled already
Does that have anything to do with the baseband ??
ChillToucH said:
Are you sure you have "Data enabled"? Try to reboot your phone.
Click to expand...
Click to collapse
Already did that and yes im sure data us enabled
Does this issue have anything to do with the baseband ??
MohamedMordi said:
Does this issue have anything to do with the baseband ??
Click to expand...
Click to collapse
Well, if in the thread you downloaded it from was nothing more to flash, then nop.
I said it because in GB Roms you must flash an additional libraries, but i dont had used CM10 based ROMs so i can just can guess, check the baseband threads.
By the way, sometimes my phone "losses" the data connection for a while (the icon dessapear even if the data connection is active). It just happen like 2 times since a got it, but after some time it comes back.
Flash latest stock 4.0.4 and then install Xperia Z Jelly Bean v4.
17th_angel said:
Well, if in the thread you downloaded it from was nothing more to flash, then nop.
I said it because in GB Roms you must flash an additional libraries, but i dont had used CM10 based ROMs so i can just can guess, check the baseband threads.
By the way, sometimes my phone "losses" the data connection for a while (the icon dessapear even if the data connection is active). It just happen like 2 times since a got it, but after some time it comes back.
Click to expand...
Click to collapse
Well, in the thread I flashed something called Xperia Arc S 4.1.B.1.13 Vodafone DE firmware and they said it's for increasing system and data memory for Arc user and latest BB. You think this is the problem ?!
the phone is not set to gsm only?
look at settings - more - mobile network - uncheck 2g
also look at the accesspoin and choose the right one
Guys please this is really urgent and I did everything I could
Last thing i did was flashing every stock thing on the phone, stock GB, stock kernel, stock baseband and nothing changed and data mobile is still not working
You can try to input the apn by yourself
Sent from my Xperia Arc S using xda app-developers app
already did!
Please guys I need some advanced solution for that. Thanks
i have a samsung galaxy s3, ive been rooted for a long time and flashing roms all the time. well i flashed a rom just now and i have no signal, not sure if i burned out the radio (not sure if thats possible, but it also said to insert sim card while it was already inserted), but i dont understand how that would happen. the sim card works in another phone that im using now, so its not the sim card thats causing the issue. my carrier is at&t, and no signal showing, not data or cell (wifi still works, but thats a different story). has anyone experienced this and know how to fix it? im guessing modem flashing, but not entirely sure. can someone please point me in the right direction? Thanks in advance!
ohaai said:
i have a samsung galaxy s3, ive been rooted for a long time and flashing roms all the time. well i flashed a rom just now and i have no signal, not sure if i burned out the radio (not sure if thats possible, but it also said to insert sim card while it was already inserted), but i dont understand how that would happen. the sim card works in another phone that im using now, so its not the sim card thats causing the issue. my carrier is at&t, and no signal showing, not data or cell (wifi still works, but thats a different story). has anyone experienced this and know how to fix it? im guessing modem flashing, but not entirely sure. can someone please point me in the right direction? Thanks in advance!
Click to expand...
Click to collapse
Aww anyone?
ohaai said:
Aww anyone?
Click to expand...
Click to collapse
just a suggestion, but try rebooting your phone again. this happened to me before and i got freaked out but a reboot has fixed this on a few occasions. running a flashed rom just fine right now.
ohaai said:
i have a samsung galaxy s3, ive been rooted for a long time and flashing roms all the time. well i flashed a rom just now and i have no signal, not sure if i burned out the radio (not sure if thats possible, but it also said to insert sim card while it was already inserted), but i dont understand how that would happen. the sim card works in another phone that im using now, so its not the sim card thats causing the issue. my carrier is at&t, and no signal showing, not data or cell (wifi still works, but thats a different story). has anyone experienced this and know how to fix it? im guessing modem flashing, but not entirely sure. can someone please point me in the right direction? Thanks in advance!
Click to expand...
Click to collapse
I believe you need to do a factory reset. Backup your data first!
Sent from my SGH-T999 using XDA Premium 4 mobile app
The first thing to troubleshoot you should do is flash back to a rooted stock rom and make sure the data is working there. If so this will rule out any sort of hardware problem. You didn't say whether or not you did but you can also try fully wiping the phone (dalvik/cache, system, and data), re-download the rom incase you had a bad one the first time and reflash. Other than that check that maybe check the apn settings.
Yup I ended up doing that last night..im back on the stock root injected rom. So im still rooted and network now works! So im glad. How would I flash a rom without losing the network this time?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
ohaai said:
Yup I ended up doing that last night..im back on the stock root injected rom. So im still rooted and network now works! So im glad. How would I flash a rom without losing the network this time?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Now that you have flashed back to stock a full wipe has been done in the process. At this point all you can do is flash it and see, but as i said i would redownload if you plan on using whatever rom it was you mentioned in the OP. I would also do a full nandroid backup to save the pain of using odin incase it doesn't work. I imagine the problem was with lingering files/fragments from multiple flashes that were causing the problem, in any case whatever the problem happened to be it was software related.
K will do. Its just weird because the md5 matched and everything..but I will for sure download the rom and gapps again. Thanks for the tips!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
well, i finally got the service to work after flashing a rom. it still remains a mystery to me tho, i used to always use the illusion rom everyday, for months. i decide to flash the same exact one but no service, i download it a couple more times and still no service after flashing about 3 or 4 times. i tried a completely different rom and the service is active. i dont understand why and cant figure out what is so different this time hah. o well, im just glad its all working now even though its with a different rom. thanks for the help guys!
ok, im back =[
i was using the carbon rom with no problems, it was working great, but just a half hour ago i was listening to music and texting (i always do this), and then phone just turned off. I tried to reboot it but it wont! it always shuts off while booting. i made it to CWM, but it turns off while in CWM. i also made it to download mode, which led me to assume that the phone is not bricked, but it doesnt stay on download mode, it just turns off randomly. i figured maybe it was battery, so i tried another, and no change! does anyone know what the issue is? i cant figure out how to keep the phone ON, or why its not staying on.
btw, i got it to boot completely just once, and it was acting up still. any ideas? please help
Thanks in advance
dntesinfrno said:
The first thing to troubleshoot you should do is flash back to a rooted stock rom and make sure the data is working there. If so this will rule out any sort of hardware problem. You didn't say whether or not you did but you can also try fully wiping the phone (dalvik/cache, system, and data), re-download the rom incase you had a bad one the first time and reflash. Other than that check that maybe check the apn settings.
Click to expand...
Click to collapse
Already flashed back to backed up stock rom but still no signal. But when I use the MIUI rom, it has signal.
driht said:
Already flashed back to backed up stock rom but still no signal. But when I use the MIUI rom, it has signal.
Click to expand...
Click to collapse
What is the bootloader and baseband version on the phone? Which version of stock are you flashing?