Develop Bugs

[Q] Android Revolution HD 3.0.0 audio - reboot failure?

I flashed on my HTC ONE X 32GB the Android Revolution HD 3.0.0 ROM
Bootloader unlocked,CID: None S-On,
Original ROM was RUU_ENDEAVOR_U_ICS_40_Vodafone_UK_1.26.161.2_Radio_1.1204.90.13_release_251227_signed)
When i will play MP3 the One X is rebooting,also in apps using Music :-(
Any Idea to fix this Problem?
Best wishes hardy_k from germany

I had the same issue, but a different ROM. For me, it was the boot.img that was incorrect. Try flashing the correct one with fastboot.

Ok how i could find the right boot.img ? For my One X ?

Hardy_k said:
Ok how i could find the right boot.img ? For my One X ?
Click to expand...
Click to collapse
1st post of the ARHD thread.

Ok Thanx a lot
I ve forget to flash the boot.img
Now it works fine

For those who did the flashing of boot.img but still have this issue, try erasing cache after flashing boot.img.
It works for me.

Full wipe + flash boot.img + ARHD = works fine.

Revolution HD Rom rebooting
I have a diagnostic app on my Samsung Galaxy Note 10.1 GT-N8013 and there is no over heating issue for the rebooting unless 90 degrees too hot...

[Q] My HOX (HTC One X) wont install sense roms

Hello,
I have recently bought a second-hand HTC One X. When i bought the HOX it was rooted running the viper x 2.0.0 rom. I decided to change the rom to cyanogen 10 nightly. It was working fine but then i decided to install slim bean 3.0.0 and this was working fine too (this is what i have on my HOX right now).What i would like to do is install viper x 2.0.0 again or another sense-based rom. However i tried doing this and it does not boot. When i install it, it just loads the htc logo and then reboots again back into clockworkmod recovery?
I have tried various sense-based roms and none of then work? Also i know viper x 2.0.0 works because it was on there when i bought it.
Please can someone give me instuctions on how to do it.
Thanks in advance
P.S When i try to install the viper x or other sense-based rom i flash the boot.img using 'fastboot flash boot boot.img'
I have just fixed it i installed the latest version and worked the one i was installing must have been a ota update? anyway if u are stuck like me read this

after flashing the boot.img try "fastboot erase cache" it should work

erase cache always

Thanks for reply
Iacopo91 said:
after flashing the boot.img try "fastboot erase cache" it should work
Click to expand...
Click to collapse
Yes i have tried doing this many times and still isn't installing any sense roms?
Please could u give me a instruction to how to install a sense-based rom or viperx (step by step)
Thanks

He is what is says:
The5alodi said:
erase cache always
Click to expand...
Click to collapse
View attachment 1568226

Are you flashing the correct boot.img from the viperx rom.zip
Sent from my HTC One X

Viperx
TToivanen said:
Are you flashing the correct boot.img from the viperx rom.zip
Sent from my HTC One X
Click to expand...
Click to collapse
Yes, i know this because i use winrar to extract the boot.img from the viperx.zip
What do u think i should do to make it work?
I was thinking do i need to flash a kernel that works for the viperx to work or does the viperx.zip already have a kernel inside the file?
At the moment i have : 2.6.39.4-cyanogenmod because i have slimbean installed which is based on cm10

Full wipe, that's all I can think of.
Sent from my HTC One X

This is one of the ways i have done it:
TToivanen said:
Full wipe, that's all I can think of.
Sent from my HTC One X
Click to expand...
Click to collapse
1. go to bootloader and hit fastboot option
2. fastboot erase cache
3. fastboot flash boot boot.img (boot.img from the viperx.zip)
4. fastboot erase cache
5. disconect the phone from USB and go to the recovery
6. wipe data/factory reset
7. wipe cache
8. mounts & storage format system , data , cache
9. go to advanced and wipe dalvic cache
10. flash the rom
11. I rebooted the HOX in the aroma installer
12. and then it just boots on htc logo then back into recovery?!?
Also the weird thing is only sense-based roms don't work? And all the sense-based roms i have tried use aroma installer, maybe this could be to do with it?

First install rom then boot.img.
Sent from my HTC One X

did u full wipe inside aroma + what rom ver you are using maybe you are flashing an update or what hboot you are on ?

Ok will try now...
TToivanen said:
First install rom then boot.img.
Sent from my HTC One X
Click to expand...
Click to collapse
Ok i will try now and report back my results.
Thanks for possible anwser

i used to install ROM before flashing the boot.img and erasing cache... if i flash boot.img before sometimes i'm stuck in bootloop...
the boot.img has to be extracted from the rom itself... also try to flash other different roms

It is...
The5alodi said:
did u full wipe inside aroma + what rom ver you are using maybe you are flashing an update or what hboot you are on ?
Click to expand...
Click to collapse
I will try now a full wipe and it is not a update as far as i am aware of. the file is called: ViperX_v2.0.0
And my hboot is:
HBOOT-1.12.0000

I have done this...
Iacopo91 said:
i used to install ROM before flashing the boot.img and erasing cache... if i flash boot.img before sometimes i'm stuck in bootloop...
the boot.img has to be extracted from the rom itself... also try to flash other different roms
Click to expand...
Click to collapse
I have done this?!?

try the latest i think its 2.7 or check ARHD because your problem is weird

ok i willl
The5alodi said:
try the latest i think its 2.7 or check ARHD because your problem is weird
Click to expand...
Click to collapse
Ok i will have to download it and its 647mb which will take me 1hr to 1hr and 30mins so will report back when i try to install it.

ok i am going to watch real Madrid match so P.M me i will help dont worry

ok thanks very much!!!!!!!!
The5alodi said:
ok i am going to watch real Madrid match so P.M me i will help dont worry
Click to expand...
Click to collapse
Ok i will do

Its working now!!!
Everyone thanks for helping i think i was instally a update not the actual rom !?! silly me !!!
Thanks again!

Problem after installation of custom ROM on HTC one X

Hi,
This is my first post (and sorry for my bad english)
I got a problem with my HTC one X, yesterday, I try to install the custom ROM ViperX 2.6.0 and after the installation, the ROM works but I am blocked on pin code because the touch doesn't work and the 3 buttons at the bottom to. The only buttons who work are power, vol up and down.
So, since yesterday, my HOX is bricked because I didn't make back up and I don't find good version of RUU and I can't send files on the SDcard.
How can I unbrick my phone (with the custom ROM or reset my HOX with RUU)?
My HOX's caracteristics:
cid : HTC__203
version : 3.18.401.1
HBOOT-1.39.0000
Thanks to help me. And sorry for my English ^^'

Benlado said:
Hi,
This is my first post (and sorry for my bad english)
I got a problem with my HTC one X, yesterday, I try to install the custom ROM ViperX 2.6.0 and after the installation, the ROM works but I am blocked on pin code because the touch doesn't work and the 3 buttons at the bottom to. The only buttons who work are power, vol up and down.
So, since yesterday, my HOX is bricked because I didn't make back up and I don't find good version of RUU and I can't send files on the SDcard.
How can I unbrick my phone (with the custom ROM or reset my HOX with RUU)?
My HOX's caracteristics:
cid : HTC__203
version : 3.18.401.1
HBOOT-1.39.0000
Thanks to help me. And sorry for my English ^^'
Click to expand...
Click to collapse
it is not bricked. did you flash the boot img from the rom zip? and if you did, did you fastboot erase cache after flashing the boot.img ? and did you do a full wipe, including cache and dalvik before flashing the rom

Also shouldn't you be flashing viper x 3.7.4 ?
http://forum.xda-developers.com/showthread.php?p=36407082
Oh and use mount usb storage on your custom recovery to copy the Rom to sd
Sent from my HTC One X

from ryakfar
nogotaclue said:
it is not bricked. did you flash the boot img from the rom zip? and if you did, did you fastboot erase cache after flashing the boot.img ? and did you do a full wipe, including cache and dalvik before flashing the rom
Click to expand...
Click to collapse
Yes, it is the boot.img from the rom zip and I did all the step you said.

this ersiledo
herbie13 said:
Also shouldn't you be flashing viper x 3.7.4 ?
http://forum.xda-developers.com/showthread.php?p=36407082
Oh and use mount usb storage on your custom recovery to copy the Rom to sd
Sent from my HTC One X
Click to expand...
Click to collapse
Thanks for your reply, you must be right, but I don't know how mount usb storage works.

When I select "mount USB storage" on recovery, it doesn't work and there is "E : unable to open ums lunfile (No such file or directory)"

Flash a newer recovery. Yours is outdated.
http://db.tt/t6RTcTwK
Then install the viper 3.7.4 just like you did with the 2.6. It booted so you did the correct steps.

Benlado said:
When I select "mount USB storage" on recovery, it doesn't work and there is "E : unable to open ums lunfile (No such file or directory)"
Click to expand...
Click to collapse
were you on stock ics or jellybean. that fault used to occur on stock ics when using cwm. you could flash twrp recovery or newer cwm and see if you still get the fault
beaten by @Mr Hofs

I flashed a newer cwm, flash viper x 2.7.4 and it works.
So my problem was a older version of the custom rom and I needed a newer version of recovery to mount sd card and flash with other custom rom.
We can close this topic =)
Thanks to all.

wifi and network not turning on

hey guys
after my phone started doeing weird, I reflashed viper x and alex v (full wipe)
but now my wifi wont turn on network won't connect and when starting the phone after the venom boot animation an htc logo appears and stays for a couple of minutes could someone help me please?
Hboot 1.72
viper 4.0.6
alex v 2.7 3
btw I will buy you a bear if you help me out

suljo94 said:
hey guys
after my phone started doeing weird, I reflashed viper x and alex v (full wipe)
but now my wifi wont turn on network won't connect and when starting the phone after the venom boot animation an htc logo appears and stays for a couple of minutes could someone help me please?
Hboot 1.72
viper 4.0.6
alex v 2.7 3
btw I will buy you a bear if you help me out
Click to expand...
Click to collapse
You need to flash boot.img, after flashing erase cache and your phone will be fully functional again
command is fastboot flash boot boot.img
And yeah, better try alex v 2.6 pa3 kernel, that kernel will give you best battery

First install i always recommend to flash the delivered boot.img and rom. Change kernel afterwards.
Like been said above, flash the Alex kernel AND install the .zip via the recovery. Modules needs to be installed too

Mr Hofs said:
First install i always recommend to flash the delivered boot.img and rom. Change kernel afterwards.
Like been said above, flash the Alex kernel AND install the .zip via the recovery. Modules needs to be installed too
Click to expand...
Click to collapse
He said that he allready flashed alex-v (zip), so i told him just to flash boot.img

I'm not correcting. Just giving full info, the terms flashing and installing gets confusing for some. In my opinion flashing is what you do via fastboot and installing via recovery

no guys tried it both. but yesterday I got it fixed it was a problem with the latest philz not supporting aroma properly (says aroma file missing) so now it works like a charm

Good !
CASE CLOSED !

nikola016 said:
You need to flash boot.img, after flashing erase cache and your phone will be fully functional again
command is fastboot flash boot boot.img
And yeah, better try alex v 2.6 pa3 kernel, that kernel will give you best battery
Click to expand...
Click to collapse
I am now on 2.6v3 thanks for the tip

PrimoU, unable to load any custom ROMs, tried about anything

So I've got a HTC One V GSM edition.
Been a while since I played with it.
I know I had at one time a ShenDU OS installed on it, but I put it back to original stock rom.
Now here it goes.
It is unlocked & S-Off.
I can install any recovery without problems (tried the CWM 5.8.4.5. PrimoU, twrp-3.1.0-0-primoU, CWM6.0.3.3)
All these recoveries work, they boot up.
But, whenever I try to load a custom ROM it fails, no matter what.
Tried a dozen of them, all from the HTC One V Primo pages on this forum
TWRP just gives 'error' and CWM gives mostly 'status 0'
The only thing that does flash into it are the official(?) RUU images, I have tried version 1.41, 2.08 and 2.22, all install perfectly.
Any tips on what I might be missing here?
I've read some things about a new radio driver that seems to stop custom roms from loading, but if I flash RUU 1.41 it also flashes the radio back to the old settings?

One v GSM is primoU , right?
Which rom did u use? Primou or primoc(cdma)?
any log file of revovery? what is the error?
Sent from my HTC One S using XDA Free mobile app

So far I tried:
https://forum.xda-developers.com/showthread.php?t=2683544
https://forum.xda-developers.com/htc-one-v/orig-development/rom-cyanogenmod-13-htc-one-t3269533
https://forum.xda-developers.com/htc-one-v/orig-development/rom-cyanogenmod-12-1-htc-one-t3071507
..and some more, but you get the idea....
They are (AFAIK) all specific for PrimoU
And for the logfiles, TWRP does not show any logs, it gives an quick error and jumps back to the menu.
CWM gives either status 0 or status 7 errors.

which version of twr do you use? i use 2.8 and there is a "save log" option in advanced in menu
either when flashing rom fails , it shows the error and dont jump to menu
i dont know, try sideload to flash rom from pc

I tried TWRP 2.8.6.0-2, but it did not boot up.
Tried ADB sideload on CWM6.0.3.3 and on TWRP3.1, also did not work.
Now I redownloaded TWRP2.8.6.0-2 to try and save the logfiles you suggested, and it boots up, so it seems my earlier download was corrupted.
I turned on error log saving, tried installing [ROM] [6.0.1] Cyanogenmod 13 for HTC One V by jonas2790, and it works!
So it turns out that TWRP2.8.6.0-2 is the only thing functioning on my version of the HTC (which was running rooted version of RUU 2.22 at that moment)
Thanks for pointing me in the right direction!
:good:

Great ... as i remember, jonas roms needs twrp 2.8 (not only your device)
good luck
Sent from my HTC One S using XDA Free mobile app