hey guys
after my phone started doeing weird, I reflashed viper x and alex v (full wipe)
but now my wifi wont turn on network won't connect and when starting the phone after the venom boot animation an htc logo appears and stays for a couple of minutes could someone help me please?
Hboot 1.72
viper 4.0.6
alex v 2.7 3
btw I will buy you a bear if you help me out
suljo94 said:
hey guys
after my phone started doeing weird, I reflashed viper x and alex v (full wipe)
but now my wifi wont turn on network won't connect and when starting the phone after the venom boot animation an htc logo appears and stays for a couple of minutes could someone help me please?
Hboot 1.72
viper 4.0.6
alex v 2.7 3
btw I will buy you a bear if you help me out
Click to expand...
Click to collapse
You need to flash boot.img, after flashing erase cache and your phone will be fully functional again
command is fastboot flash boot boot.img
And yeah, better try alex v 2.6 pa3 kernel, that kernel will give you best battery
First install i always recommend to flash the delivered boot.img and rom. Change kernel afterwards.
Like been said above, flash the Alex kernel AND install the .zip via the recovery. Modules needs to be installed too
Mr Hofs said:
First install i always recommend to flash the delivered boot.img and rom. Change kernel afterwards.
Like been said above, flash the Alex kernel AND install the .zip via the recovery. Modules needs to be installed too
Click to expand...
Click to collapse
He said that he allready flashed alex-v (zip), so i told him just to flash boot.img
I'm not correcting. Just giving full info, the terms flashing and installing gets confusing for some. In my opinion flashing is what you do via fastboot and installing via recovery
no guys tried it both. but yesterday I got it fixed it was a problem with the latest philz not supporting aroma properly (says aroma file missing) so now it works like a charm
Good !
CASE CLOSED !
nikola016 said:
You need to flash boot.img, after flashing erase cache and your phone will be fully functional again
command is fastboot flash boot boot.img
And yeah, better try alex v 2.6 pa3 kernel, that kernel will give you best battery
Click to expand...
Click to collapse
I am now on 2.6v3 thanks for the tip
Related
Hello,
I have recently bought a second-hand HTC One X. When i bought the HOX it was rooted running the viper x 2.0.0 rom. I decided to change the rom to cyanogen 10 nightly. It was working fine but then i decided to install slim bean 3.0.0 and this was working fine too (this is what i have on my HOX right now).What i would like to do is install viper x 2.0.0 again or another sense-based rom. However i tried doing this and it does not boot. When i install it, it just loads the htc logo and then reboots again back into clockworkmod recovery?
I have tried various sense-based roms and none of then work? Also i know viper x 2.0.0 works because it was on there when i bought it.
Please can someone give me instuctions on how to do it.
Thanks in advance
P.S When i try to install the viper x or other sense-based rom i flash the boot.img using 'fastboot flash boot boot.img'
I have just fixed it i installed the latest version and worked the one i was installing must have been a ota update? anyway if u are stuck like me read this
after flashing the boot.img try "fastboot erase cache" it should work
erase cache always
Thanks for reply
Iacopo91 said:
after flashing the boot.img try "fastboot erase cache" it should work
Click to expand...
Click to collapse
Yes i have tried doing this many times and still isn't installing any sense roms?
Please could u give me a instruction to how to install a sense-based rom or viperx (step by step)
Thanks
He is what is says:
The5alodi said:
erase cache always
Click to expand...
Click to collapse
View attachment 1568226
Are you flashing the correct boot.img from the viperx rom.zip
Sent from my HTC One X
Viperx
TToivanen said:
Are you flashing the correct boot.img from the viperx rom.zip
Sent from my HTC One X
Click to expand...
Click to collapse
Yes, i know this because i use winrar to extract the boot.img from the viperx.zip
What do u think i should do to make it work?
I was thinking do i need to flash a kernel that works for the viperx to work or does the viperx.zip already have a kernel inside the file?
At the moment i have : 2.6.39.4-cyanogenmod because i have slimbean installed which is based on cm10
Full wipe, that's all I can think of.
Sent from my HTC One X
This is one of the ways i have done it:
TToivanen said:
Full wipe, that's all I can think of.
Sent from my HTC One X
Click to expand...
Click to collapse
1. go to bootloader and hit fastboot option
2. fastboot erase cache
3. fastboot flash boot boot.img (boot.img from the viperx.zip)
4. fastboot erase cache
5. disconect the phone from USB and go to the recovery
6. wipe data/factory reset
7. wipe cache
8. mounts & storage format system , data , cache
9. go to advanced and wipe dalvic cache
10. flash the rom
11. I rebooted the HOX in the aroma installer
12. and then it just boots on htc logo then back into recovery?!?
Also the weird thing is only sense-based roms don't work? And all the sense-based roms i have tried use aroma installer, maybe this could be to do with it?
First install rom then boot.img.
Sent from my HTC One X
did u full wipe inside aroma + what rom ver you are using maybe you are flashing an update or what hboot you are on ?
Ok will try now...
TToivanen said:
First install rom then boot.img.
Sent from my HTC One X
Click to expand...
Click to collapse
Ok i will try now and report back my results.
Thanks for possible anwser
i used to install ROM before flashing the boot.img and erasing cache... if i flash boot.img before sometimes i'm stuck in bootloop...
the boot.img has to be extracted from the rom itself... also try to flash other different roms
It is...
The5alodi said:
did u full wipe inside aroma + what rom ver you are using maybe you are flashing an update or what hboot you are on ?
Click to expand...
Click to collapse
I will try now a full wipe and it is not a update as far as i am aware of. the file is called: ViperX_v2.0.0
And my hboot is:
HBOOT-1.12.0000
I have done this...
Iacopo91 said:
i used to install ROM before flashing the boot.img and erasing cache... if i flash boot.img before sometimes i'm stuck in bootloop...
the boot.img has to be extracted from the rom itself... also try to flash other different roms
Click to expand...
Click to collapse
I have done this?!?
try the latest i think its 2.7 or check ARHD because your problem is weird
ok i willl
The5alodi said:
try the latest i think its 2.7 or check ARHD because your problem is weird
Click to expand...
Click to collapse
Ok i will have to download it and its 647mb which will take me 1hr to 1hr and 30mins so will report back when i try to install it.
ok i am going to watch real Madrid match so P.M me i will help dont worry
ok thanks very much!!!!!!!!
The5alodi said:
ok i am going to watch real Madrid match so P.M me i will help dont worry
Click to expand...
Click to collapse
Ok i will do
Its working now!!!
Everyone thanks for helping i think i was instally a update not the actual rom !?! silly me !!!
Thanks again!
Maybe i missed the kernel lesson, but i can'd find it in this forum.
My problem is : when you install a new rom, first you flash the boot.img from rom. When you want to flash another kernel, you flash the kernel.img and if existe, the modules. Why am i getting no network or wifi ? ex: Viper x, and XM kernel.
flashed viperx bot img from rom zip, instaled 3.4.0, first boot, everything is ok. My battery drained like in 30 min, so i decided to flash another kernel. I've gone reading, and the XM looks the best in battery life, and see in other post that is compatible. I flashed XM, and now i have wifi error and no network.
Please help me.
SupremE MaDDoX said:
Maybe i missed the kernel lesson, but i can'd find it in this forum.
My problem is : when you install a new rom, first you flash the boot.img from rom. When you want to flash another kernel, you flash the kernel.img and if existe, the modules. Why am i getting no network or wifi ? ex: Viper x, and XM kernel.
flashed viperx bot img from rom zip, instaled 3.4.0, first boot, everything is ok. My battery drained like in 30 min, so i decided to flash another kernel. I've gone reading, and the XM looks the best in battery life, and see in other post that is compatible. I flashed XM, and now i have wifi error and no network.
Please help me.
Click to expand...
Click to collapse
Did you do the fastboot erase cache?
Which boot.img did you flash? The one from kernel.zip?
Please provide more details...
[email protected]|-|oR said:
Did you do the fastboot erase cache?
Which boot.img did you flash? The one from kernel.zip?
Please provide more details...
Click to expand...
Click to collapse
ok, i will write the steps
1. flashed boot.img from viper x (with viperx kernel flasher, that does fastboot erase cache)
2. flashed rom viper x 3.4.0
3. boot to see if is ok, is ok, all works, but the battery life is so poor
4. download xm kernel, and with the kernel flasher tool flashed it
5. no wifi and network signal
SupremE MaDDoX said:
ok, i will write the steps
1. flashed boot.img from viper x (with viperx kernel flasher, that does fastboot erase cache)
2. flashed rom viper x 3.4.0
3. boot to see if is ok, is ok, all works, but the battery life is so poor
4. download xm kernel, and with the kernel flasher tool flashed it
5. no wifi and network signal
Click to expand...
Click to collapse
From this steps I don't see that you flashed xm modules. that's why you don't have signal.
Sent from my HTC One X
NITRO_100 said:
From this steps I don't see that you flashed xm modules. that's why you don't have signal.
Sent from my HTC One X
Click to expand...
Click to collapse
i flashed xm kernel who has modules in zip.. tell me by stept so i can never ask stupid questions
SupremE MaDDoX said:
i flashed xm kernel who has modules in zip.. tell me by stept so i can never ask stupid questions
Click to expand...
Click to collapse
If you used One X One click, it should have flashed everything properly...
Still, here are the steps:
- place the kernel.zip to your sd card root
- place boot.img from kernel.zip to your fastboot folder on your pc
- reboot in bootloader
- fastboot erase cache
- fastboot flash boot boot.img
- fastboot erase cache
- reboot in recovery
- wipe cache/dalvik
- flash kernel.zip
- wipe cache/dalvik
- reboot
This works for me every time, even though I duplicate wiping (not necessary).
[email protected]|-|oR said:
If you used One X One click, it should have flashed everything properly...
Still, here are the steps:
- place the kernel.zip to your sd card root
- place boot.img from kernel.zip to your fastboot folder on your pc
- reboot in bootloader
- fastboot erase cache
- fastboot flash boot boot.img
- fastboot erase cache
- reboot in recovery
- wipe cache/dalvik
- flash kernel.zip
- wipe cache/dalvik
- reboot
This works for me every time, even though I duplicate wiping (not necessary).
Click to expand...
Click to collapse
Thank you, it was all i needed !
Hi guys, i have a problem with Ordroid 14.0 & XM-Kernel #283, the WiFi not work, only put "authenticating", anyone know what could be wrong?
Thanks, and sorry my bad english
You flashed the boot.img, did you install the modules in the recovery ?
Yes, i follow the steps with says in the post
Install modules from recovery (Install the zip)
Wipe dalvik cache. Yes, it's important, the versions could have some binary level differencies (from different compiler options) which can lead to unknown behaviour with old dalvik code.
Erase fastboot cache
Flash kernel image with fastboot
If you have problems with some functions not working on your ROM, then repack. Otherwise it's not needed.
Click to expand...
Click to collapse
And did you used the repacked one that's posted in the thread ? If so i would try the pure one from the XM kernel thread
I tried with both, and tried with 4 versions, and not work :s
Try it once more the other way around, boot to the bootloader and flash the new xm boot.img
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Enter the recovery and install the modules.zip
The same, not work, I think I'll leave it with the stock kernel
Yeah i guess, if you tried the normal and the repacked one then there is not much to play around with anymore !
Did you try 274 too, i see that its been used without repacking ....
Yeah i think so, thanks very much for your help n.n
Link http://d-h.st/XfJ
You are using the sense based kernels right ?
Yes, i already test that version xD
Then im out of options !
Hi Guys.
I have some problems installing CM11 on my
HTC One X - endeavoru
I have tried both installting
cm-11-20140204-NIGHTLY-endeavoru.zip
cm-11-20140203-NIGHTLY-endeavoru.zip
I use Colckworkmod v. 6.0.4.5 as recovery
Before install CM i
Wipe userdata
Wipe Cache
Wipe Dalvik Chace
Install CM.zip
Install GApps.zip
After installing i reboot but it keeps looping in startup screen with the Cyanogen logo
I have tried to restart / factory reset but i doenst work
Any ideas ?
Thanks in advance.
izemate said:
Hi Guys.
I have some problems installing CM11 on my
HTC One X - endeavoru
I have tried both installting
cm-11-20140204-NIGHTLY-endeavoru.zip
cm-11-20140203-NIGHTLY-endeavoru.zip
I use Colckworkmod v. 6.0.4.5 as recovery
Before install CM i
Wipe userdata
Wipe Cache
Wipe Dalvik Chace
Install CM.zip
Install GApps.zip
After installing i reboot but it keeps looping in startup screen with the Cyanogen logo
I have tried to restart / factory reset but i doenst work
Any ideas ?
Thanks in advance.
Click to expand...
Click to collapse
have you flashed boot.img via fastboot and then erased cache (always via fastboot)?
lukes91 said:
have you flashed boot.img via fastboot and then erased cache (always via fastboot)?
Click to expand...
Click to collapse
Yes Lukes is right. This is the typical issue if you didn't flash boot.img AND erased the cache. Give it a go, it'll fix it for sure.
fixed
Yep it did the trick ! now it works fine.
What are your experience with updating nightly builds.
Can i just update them through CMs update manager or is it best to flash from scratch.
Sorry, always used sense roms on HOX
Sent from my Venomed HOX using XDA Premium 4 Chocolate Orange
You may flash boot.img before reboot your phone.
Sent from my HTC One X using xda app-developers app
izemate said:
Yep it did the trick ! now it works fine.
What are your experience with updating nightly builds.
Can i just update them through CMs update manager or is it best to flash from scratch.
Click to expand...
Click to collapse
mrkizy said:
You may flash boot.img before reboot your phone.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Read all posts hehe
izemate said:
Yep it did the trick ! now it works fine.
What are your experience with updating nightly builds.
Can i just update them through CMs update manager or is it best to flash from scratch.
Click to expand...
Click to collapse
Hi,
I am have the same problem except my HTC OneX is in a loop on the HTC screen. Can you please tell me how you flashed the boot.img and also from where did you get this file ?
aduly123 said:
Hi,
I am have the same problem except my HTC OneX is in a loop on the HTC screen. Can you please tell me how you flashed the boot.img and also from where did you get this file ?
Click to expand...
Click to collapse
Why do people mess around even before reading !!!
You flash a boot.img via fastboot commands on the pc. The boot.img is located inside the rom.zip file !
I strongly suggest you start reading here
http://forum.xda-developers.com/showthread.php?t=1832891
Mr Hofs said:
Why do people mess around even before reading !!!
You flash a boot.img via fastboot commands on the pc. The boot.img is located inside the rom.zip file !
I strongly suggest you start reading here
http://forum.xda-developers.com/showthread.php?t=1832891
Click to expand...
Click to collapse
Thanks Mr Hofs,
I flashed the boot.img after installing the ROM and then I erased the cache and rebooted the device and Vola - IT WORKED.
aduly123 said:
Thanks Mr Hofs,
Just one more question, do I flash before or after installing the rom.zip ?
Click to expand...
Click to collapse
You mean the boot.img ? Doesn't matter, can be done before or after.
I usually do it before.....just a habit.
Hi guys,
I'm new in this section because I had an HTC One SV, but today I receive One X. Now... I have a very serious problem: after I flashed a custom kernel, HTC doesn't seems to boot, but it it's stuck in the white screen with the green HTC word. I tried to flash another kernel and stock kernel too, but this doesn't seems to be useful... Please help me!!! (I'm not S-Off)
TheSura said:
Hi guys,
I'm new in this section because I had an HTC One SV, but today I receive One X. Now... I have a very serious problem: after I flashed a custom kernel, HTC doesn't seems to boot, but it it's stuck in the white screen with the green HTC word. I tried to flash another kernel and stock kernel too, but this doesn't seems to be useful... Please help me!!! (I'm not S-Off)
Click to expand...
Click to collapse
flash the boot.img via fastboot you must take it from modules archive and paste it on your fastboot folder then run from cmd fastboot flash boot boot.img and restart
Thant said:
flash the boot.img via fastboot you must take it from modules archive and paste it on your fastboot folder then run from cmd fastboot flash boot boot.img and restart
Click to expand...
Click to collapse
I tried many times and finally, my HTC booted until the lockscreen. If I tried to unlock, it returned that White screen, but my PC recognized it and I could copy Viper ROM inside it. So, I flashed the ROM and now it work. But if I want back to stock? I don't have any nandroid backup and; I don't know why, I can't do S-Off: using rumrunner, it does all the procedure, but it stucks on pouring: it arrives to pouring (8) and then it says me to reboot and retry. So, what can I do?
TheSura said:
I tried many times and finally, my HTC booted until the lockscreen. If I tried to unlock, it returned that White screen, but my PC recognized it and I could copy Viper ROM inside it. So, I flashed the ROM and now it work. But if I want back to stock? I don't have any nandroid backup and; I don't know why, I can't do S-Off: using rumrunner, it does all the procedure, but it stucks on pouring: it arrives to pouring (8) and then it says me to reboot and retry. So, what can I do?
Click to expand...
Click to collapse
No S-OFF for ONE X international Endeavoru, your only way is restore nandroid backup find it from somewhere
Thant said:
No S-OFF for ONE X international Endeavoru, your only way is restore nandroid backup find it from somewhere
Click to expand...
Click to collapse
Well, I understood. Thank you so much! I've found a nandroid yet, but I'm having problems with the process "HTC.opensense.social" or something similar because it stopped improperly. Sorry if I do so many questions, but I'm n00b <_< Thank you
TheSura said:
Well, I understood. Thank you so much! I've found a nandroid yet, but I'm having problems with the process "HTC.opensense.social" or something similar because it stopped improperly. Sorry if I do so many questions, but I'm n00b <_< Thank you
Click to expand...
Click to collapse
da a full wipe(system,data,cache and davlik cache) and don't forget to flash the boot.img from nandroid backup
Thant said:
da a full wipe(system,data,cache and davlik cache) and don't forget to flash the boot.img from nandroid backup
Click to expand...
Click to collapse
I did yet before restoring nandroid! But I didn't flash the boot.img because after restoring, I flashed a new kernel from recovery and from fastboot. The cause could be the custom kernel?
TheSura said:
I did yet before restoring nandroid! But I didn't flash the boot.img because after restoring, I flashed a new kernel from recovery and from fastboot. The cause could be the custom kernel?
Click to expand...
Click to collapse
are you flash the boot.img from the kernel?
Thant said:
are you flash the boot.img from the kernel?
Click to expand...
Click to collapse
Yes, I did
thesura said:
yes, i did
Click to expand...
Click to collapse
@TheSura
Sorry, Wich kernel do you try to flash
Thant said:
@TheSura
Sorry, Wich kernel do you try to flash
Click to expand...
Click to collapse
I flashed this kernel: http://forum.xda-developers.com/showthread.php?t=2586808
Now I want to try another because it has overclock to 1.7: http://forum.xda-developers.com/showthread.php?t=2138586
Is this good?
Ps: doesn't matter the error: I'm going to return to viper, so don't worry
TheSura said:
I flashed this kernel: http://forum.xda-developers.com/showthread.php?t=2586808
Now I want to try another because it has overclock to 1.7: http://forum.xda-developers.com/showthread.php?t=2138586
Is this good?
Ps: doesn't matter the error: I'm going to return to viper, so don't worry
Click to expand...
Click to collapse
in this aroma flasher have 6 kernels you must to flash the coerct boot.img from modules archive
Thant said:
in this aroma flasher have 6 kernels you must to flash the coerct boot.img from modules archive
Click to expand...
Click to collapse
Understood! Thank you very much!