Develop Bugs

Both CM9/CM10 hangs at boot.

My procedure in chronological order:
Flashed recovery TWRP 2.3
Wiped everything possible in the wipe-tab
Installed CM9/10 from zip on SD-card (zip contains META-INF, system and boot.img)
Flashed boot.img from the zip file CM9/10
Issued the command fastboot erase cache
Unplugged cable and reboot
What happens is that I am stuck at the HTC booting screen. I have been here for about 30-40 minutes. If I try any adb shell command I receive this error: - exec '/system/bin/sh' failed: No such file or directory (2) -. Clearly, something is not right here. I will not speculate because I lack the knowledge to do so. Any help is appreciated because I have been phone-less for a day now and it is getting irritating. Thanks!

Seems you did everything correctly.
Try to flash via ClockWorkMod recovery.
Sent from my HTC One X

TToivanen said:
Seems you did everything correctly.
Try to flash via ClockWorkMod recovery.
Click to expand...
Click to collapse
I just did the same procedure as before but with clockworkmod instead. Still hung at booting screen. I get the same error as before. Is root access a must? I have not done any exploit, only thing I have done is unlocked my boot loader at HTCDev.

zettez said:
I just did the same procedure as before but with clockworkmod instead. Still hung at booting screen. I get the same error as before. Is root access a must? I have not done any exploit, only thing I have done is unlocked my boot loader at HTCDev.
Click to expand...
Click to collapse
Root should not be needed since most roms are rooted by default.
Did you flash gapps?

TToivanen said:
Root should not be needed since most roms are rooted by default.
Did you flash gapps?
Click to expand...
Click to collapse
No, I have not. Maybe I should give it a try? Or is it not required? Should I not be able to start the phone without any gapps?
Do you by chance have any ROM you can recommend that works so I could try it out and exclude problems? Would very like to know if it is my phone or ROM that is buggy.

It should boot without them, but better to give it a try.
Ironically, I've been using CM10 for more than a month now and never had any problems booting.
Sent from my HTC One X

If you have an hboot newer than 1.12 you need a different boot.img, check the bottom if the ROM OP.

TToivanen said:
It should boot without them, but better to give it a try.
Ironically, I've been using CM10 for more than a month now and never had any problems booting.
Click to expand...
Click to collapse
Would you mind telling me which CM10 build you are using and which boot.img you flashed?

BenPope said:
If you have an hboot newer than 1.12 you need a different boot.img, check the bottom if the ROM OP.
Click to expand...
Click to collapse
I have hboot 1.3 or something I think. I downloaded the different builds at get.cm. Where can I get the boot.img if not the one in the zip file? Do you mean whichever thread that CM have posted themselves here on xda? Would you mind sending a link to where I can find the boot.img?

zettez said:
I have hboot 1.3 or something I think. I downloaded the different builds at get.cm. Where can I get the boot.img if not the one in the zip file? Do you mean whichever thread that CM have posted themselves here on xda? Would you mind sending a link to where I can find the boot.img?
Click to expand...
Click to collapse
Normally it would be found in the bottom of CM10 threads OP but the link is down.
Here you go:
http://forum.xda-developers.com/showpost.php?p=34829297&postcount=9173
Remember to repack it with the one found in zip. Repack tool stickied on android development forum.
Sent from my HTC One X

TToivanen said:
Normally it would be found in the bottom of CM10 threads OP but the link is down.
Here you go:
http://forum.xda-developers.com/showpost.php?p=34829297&postcount=9173
Remember to repack it with the one found in zip. Repack tool stickied on android development forum.
Click to expand...
Click to collapse
Thanks, but still a no go. What I did was take the modified boot from your link and the boot.img from the zip file, do the online converter as stickied on the forum, then did the procedure all again but this time I flashed the new boot.img I got from combining the old and the new boot.img. Still hangs at boot. Very annoying. I am currently using a modified stock ROM and I dislike it very much.

Hey,
I have exactly the same issue. I've unlocked my bootloader using the method as specified by htcdev.com. Then I flashed the newest CWM recovery. But if I flash any ROM, I'm stuck at its boot animation. However if I then unzip the boot.img from the ROM, and flash that (fastboot flash boot boot.img), my phone won't boot past HTC screen. Even erasing the cache didn't help (fastboot erase cache).
I've restored the stock ROM using the RUU, however during the process something went wrong and it formatted my sd-card. So I'm stuck with the stock ROM, without any applications or data.
Can anybody help me flash CM10?
My Hboot version is 1.36.0000
And I'm trying to flash the cm-10-20121210-NIGHTLY-endeavoru.zip ROM.
Thanks in advance
Han

irundaia said:
Hey,
I have exactly the same issue. I've unlocked my bootloader using the method as specified by htcdev.com. Then I flashed the newest CWM recovery. But if I flash any ROM, I'm stuck at its boot animation. However if I then unzip the boot.img from the ROM, and flash that (fastboot flash boot boot.img), my phone won't boot past HTC screen. Even erasing the cache didn't help (fastboot erase cache).
I've restored the stock ROM using the RUU, however during the process something went wrong and it formatted my sd-card. So I'm stuck with the stock ROM, without any applications or data.
Can anybody help me flash CM10?
My Hboot version is 1.36.0000
And I'm trying to flash the cm-10-20121210-NIGHTLY-endeavoru.zip ROM.
Thanks in advance
Han
Click to expand...
Click to collapse
You cannot use the boot.img that comes with the zip out of the box if you have Hboot 1.36. What you have to do is repack it, taking the boot.img from the zip file and then a modified boot.img here http://forum.xda-developers.com/show...postcount=9173 (thanks TToivanen), then as I understood it, repack it for instance here http://forum.xda-developers.com/showthread.php?t=1815607, download the repacked boot.img and flash that.
With that said, I could not get it running but it might be something wrong with my phone. Please try this out and tell me if it works or not so I may start to conclude where the error lies.

zettez said:
Thanks, but still a no go. What I did was take the modified boot from your link and the boot.img from the zip file, do the online converter as stickied on the forum, then did the procedure all again but this time I flashed the new boot.img I got from combining the old and the new boot.img. Still hangs at boot. Very annoying. I am currently using a modified stock ROM and I dislike it very much.
Click to expand...
Click to collapse
Sorry, but all I can say is that you did a mistake at some point.
Try installing again with full wipe and remember to wipe cache and dalvik.
You are referring to the official CM10 and not Trip's or any other builds right?

TToivanen said:
Sorry, but all I can say is that you did a mistake at some point.
Try installing again with full wipe and remember to wipe cache and dalvik.
You are referring to the official CM10 and not Trip's or any other builds right?
Click to expand...
Click to collapse
Will try again. I got the latest build from http://get.cm/?device=endeavoru. Will try cm-10-20121213-NIGHTLY-endeavoru.zip as it came out today.

zettez said:
You cannot use the boot.img that comes with the zip out of the box if you have Hboot 1.36. What you have to do is repack it, taking the boot.img from the zip file and then a modified boot.img here http://forum.xda-developers.com/show...postcount=9173 (thanks TToivanen), then as I understood it, repack it for instance here http://forum.xda-developers.com/showthread.php?t=1815607, download the repacked boot.img and flash that.
With that said, I could not get it running but it might be something wrong with my phone. Please try this out and tell me if it works or not so I may start to conclude where the error lies.
Click to expand...
Click to collapse
I did that and now my phone is still stuck on the HTC screen. Trying to restore my backup of the stock ROM atm.
---------- Post added at 04:35 PM ---------- Previous post was at 04:30 PM ----------
hmm the backup was useless... Off to the RUU it is....

irundaia said:
[/COLOR]hmm the backup was useless... Off to the RUU it is....
Click to expand...
Click to collapse
You flashed the stock boot.img before restoring?

irundaia said:
I did that and now my phone is still stuck on the HTC screen. Trying to restore my backup of the stock ROM atm.
Click to expand...
Click to collapse
I see, then it is not only I who have this problem.
And a heads up, if the backup would go wrong, I currently use this ROM and it works pretty good if you want stock or cannot be arsed to get a root exploit for the stock ROM. http://forum.xda-developers.com/showthread.php?t=2035203.
Would be great if anyone has any ideas why irundaia and I cannot make CM10 work?

TToivanen said:
You flashed the stock boot.img before restoring?
Click to expand...
Click to collapse
You're right, I forgot to do that. I does boot now, still at a loss though. Can't we downgrade our Hboot to a version in which we know that CM can be flashed?

Kinda out of ideas here...
Can you confirm that the boot.img flashes ok? (should say OKAY)
Also confirm that you have endeavoru and not evita.

[Q] My HOX (HTC One X) wont install sense roms

Hello,
I have recently bought a second-hand HTC One X. When i bought the HOX it was rooted running the viper x 2.0.0 rom. I decided to change the rom to cyanogen 10 nightly. It was working fine but then i decided to install slim bean 3.0.0 and this was working fine too (this is what i have on my HOX right now).What i would like to do is install viper x 2.0.0 again or another sense-based rom. However i tried doing this and it does not boot. When i install it, it just loads the htc logo and then reboots again back into clockworkmod recovery?
I have tried various sense-based roms and none of then work? Also i know viper x 2.0.0 works because it was on there when i bought it.
Please can someone give me instuctions on how to do it.
Thanks in advance
P.S When i try to install the viper x or other sense-based rom i flash the boot.img using 'fastboot flash boot boot.img'
I have just fixed it i installed the latest version and worked the one i was installing must have been a ota update? anyway if u are stuck like me read this

after flashing the boot.img try "fastboot erase cache" it should work

erase cache always

Thanks for reply
Iacopo91 said:
after flashing the boot.img try "fastboot erase cache" it should work
Click to expand...
Click to collapse
Yes i have tried doing this many times and still isn't installing any sense roms?
Please could u give me a instruction to how to install a sense-based rom or viperx (step by step)
Thanks

He is what is says:
The5alodi said:
erase cache always
Click to expand...
Click to collapse
View attachment 1568226

Are you flashing the correct boot.img from the viperx rom.zip
Sent from my HTC One X

Viperx
TToivanen said:
Are you flashing the correct boot.img from the viperx rom.zip
Sent from my HTC One X
Click to expand...
Click to collapse
Yes, i know this because i use winrar to extract the boot.img from the viperx.zip
What do u think i should do to make it work?
I was thinking do i need to flash a kernel that works for the viperx to work or does the viperx.zip already have a kernel inside the file?
At the moment i have : 2.6.39.4-cyanogenmod because i have slimbean installed which is based on cm10

Full wipe, that's all I can think of.
Sent from my HTC One X

This is one of the ways i have done it:
TToivanen said:
Full wipe, that's all I can think of.
Sent from my HTC One X
Click to expand...
Click to collapse
1. go to bootloader and hit fastboot option
2. fastboot erase cache
3. fastboot flash boot boot.img (boot.img from the viperx.zip)
4. fastboot erase cache
5. disconect the phone from USB and go to the recovery
6. wipe data/factory reset
7. wipe cache
8. mounts & storage format system , data , cache
9. go to advanced and wipe dalvic cache
10. flash the rom
11. I rebooted the HOX in the aroma installer
12. and then it just boots on htc logo then back into recovery?!?
Also the weird thing is only sense-based roms don't work? And all the sense-based roms i have tried use aroma installer, maybe this could be to do with it?

First install rom then boot.img.
Sent from my HTC One X

did u full wipe inside aroma + what rom ver you are using maybe you are flashing an update or what hboot you are on ?

Ok will try now...
TToivanen said:
First install rom then boot.img.
Sent from my HTC One X
Click to expand...
Click to collapse
Ok i will try now and report back my results.
Thanks for possible anwser

i used to install ROM before flashing the boot.img and erasing cache... if i flash boot.img before sometimes i'm stuck in bootloop...
the boot.img has to be extracted from the rom itself... also try to flash other different roms

It is...
The5alodi said:
did u full wipe inside aroma + what rom ver you are using maybe you are flashing an update or what hboot you are on ?
Click to expand...
Click to collapse
I will try now a full wipe and it is not a update as far as i am aware of. the file is called: ViperX_v2.0.0
And my hboot is:
HBOOT-1.12.0000

I have done this...
Iacopo91 said:
i used to install ROM before flashing the boot.img and erasing cache... if i flash boot.img before sometimes i'm stuck in bootloop...
the boot.img has to be extracted from the rom itself... also try to flash other different roms
Click to expand...
Click to collapse
I have done this?!?

try the latest i think its 2.7 or check ARHD because your problem is weird

ok i willl
The5alodi said:
try the latest i think its 2.7 or check ARHD because your problem is weird
Click to expand...
Click to collapse
Ok i will have to download it and its 647mb which will take me 1hr to 1hr and 30mins so will report back when i try to install it.

ok i am going to watch real Madrid match so P.M me i will help dont worry

ok thanks very much!!!!!!!!
The5alodi said:
ok i am going to watch real Madrid match so P.M me i will help dont worry
Click to expand...
Click to collapse
Ok i will do

Its working now!!!
Everyone thanks for helping i think i was instally a update not the actual rom !?! silly me !!!
Thanks again!

kernel, twrp and back to stock issues

hi,
im stuck in a circle of stupid mistakes
from the beginning:
my HOX was on stock ROM, but rooted.
i made the OTA to 3.18.401.1 (by using rootkeeper)
then i wanted to get back to stock without root by flashin a RUU.
there is no RUU for the 3.18.xx
the older RUUs are giving me an error 140 message
so i figured out that the only way to get back to stock now is by restoring a NAND backup
i haven't made a backup of my HOX because i already have it since few days
a kind user of this forum gave me his twrp backup of 3.18.401.1 to restore
so i flashed the twrp 2.4.3.0 to restore
but the touchscreen isnt working (same with twrp 2.4.0.0)
after reading a little on xda i now know that this is kernel related issue
i flashed the adviced kernel over CWM
flashed twrp 2.4.0.0
but touchscreen still isnt working.
:crying:
Now i dont know what to do.
im trying to fix this for 2 days now and i cant take it any longer
HOX CID HTC__102

AW: kernel, twrp and back to stock issues
Don't flash the kernel via cwm, flash it via fastboot
And the right section for this would have been Q&A
Gesendet von meinem One X mit Tapatalk 2

Flo95 said:
Don't flash the kernel via cwm, flash it via fastboot
And the right section for this would have been Q&A
Click to expand...
Click to collapse
Sorry, i thought this would be the right section...
How to flash the kernel with fastboot?
only unzip the boot.img and then fastboot flash boot boot.img ?

LaLey said:
Sorry, i thought this would be the right section...
How to flash the kernel with fastboot?
only unzip the boot.img and then fastboot flash boot boot.img ?
Click to expand...
Click to collapse
Flash cwr then twrp and no issues with touch after
Sent from my HTC One X using xda premium

matmar said:
Flash cwr then twrp and no issues with touch after
Click to expand...
Click to collapse
no, its not working. this is my problem

LaLey said:
no, its not working. this is my problem
Click to expand...
Click to collapse
Have you tried erasing cache in fastboot with fastboot erase cache. Maybe that will help

i had the wrong version of the twrp 2.4.0.0.
it has to be the openrecovery-twrp-2.4.0.0-endeavoru-JB.img
now touch is working
but how do i restore a backup?
my HTC_102-3.18.401.1 TWRP Backup.zip is on the root folder of sd.
whe i tap restore in twrp this backup is not shown...
EDIT:
ah ok, i need to create folder /twrp/backups/myIMEI/

Glad to see you got sorted

TWRP screen not working

Hello,
So i was rooting my HTC ONE X, following the steps by guide in general thread. And when i flashed TWRP and booted into it, screen is not responding and i can not navigate through it. What i did wrong?

Nothing probably. The newer official bases have updated touchdrivers .....
Flash this one and try again
http://db.tt/H7m4ffIP

there are problems with the 3.20 fw...I am using cwm now, until fixed version will come out

Mr Hofs said:
Nothing probably. The newer official bases have updated touchdrivers .....
Flash this one and try again
http://db.tt/H7m4ffIP
Click to expand...
Click to collapse
How should i do that? I was following this http://forum.xda-developers.com/showthread.php?t=2069904 thread so really no idea how to flash things without CWMP or TWRP.

throcker said:
there are problems with the 3.20 fw...I am using cwm now, until fixed version will come out
Click to expand...
Click to collapse
Nah no problem with the 3.20 firmware.....it already exist from the first 3.16 update

So should i flash CWM on top?

Yeah just flash it. It will override the old one

Mr Hofs said:
Yeah just flash it. It will override the old one
Click to expand...
Click to collapse
Thank you, it worked just fine.

I know
CASE CLOSED !

Mr Hofs said:
I know
CASE CLOSED !
Click to expand...
Click to collapse
So another problem i have. After i wiped cache dalvik and other, Flashed a ROM and flashed a kernel from boot.img, rom boots up. Everything seems ok except touchscreen not working. Can not insert pin code. Any ideas?

redh4t said:
So another problem i have. After i wiped cache dalvik and other, Flashed a ROM and flashed a kernel from boot.img, rom boots up. Everything seems ok except touchscreen not working. Can not insert pin code. Any ideas?
Click to expand...
Click to collapse
Which ROM are you using?
Did you fully wipe everything in recovery?
1. Flash boot.img from the rom.zip after that...
2. fastboot erase cache
3. Flash this script via recovery(Install from sd>choose the zip) : http://d-h.st/kG0 (it wipes /data/cache/dalvic/system
4. Flash the rom
5. Reboot!

vin4yak said:
Which ROM are you using?
Did you fully wipe everything in recovery?
1. Flash boot.img from the rom.zip after that...
2. fastboot erase cache
3. Flash this script via recovery(Install from sd>choose the zip) : http://d-h.st/kG0 (it wipes /data/cache/dalvic/system
4. Flash the rom
5. Reboot!
Click to expand...
Click to collapse
How to do that second step? fastboot erase cache?
This is what i did:
1. Rooted my phone.
2. Made a backup
3. Wipe Cache, Dalvik, Factory Reset and System with CWMR
4. Installed ROM MIUI Official
5. Rebooted into bootloader
6. Opened toolkit by Hasoon2000 (allinone) and flashed kernel (boot.img) from ROM.zip
7. Rebooted - touchscreen bug.

redh4t said:
How to do that second step? fastboot erase cache?
This is what i did:
1. Rooted my phone.
2. Made a backup
3. Wipe Cache, Dalvik, Factory Reset and System with CWMR
4. Installed ROM MIUI Official
5. Rebooted into bootloader
6. Opened toolkit by Hasoon2000 (allinone) and flashed kernel (boot.img) from ROM.zip
7. Rebooted - touchscreen bug.
Click to expand...
Click to collapse
Use RD-MIUI from xda! Don't use the one from the other site... many people have found this touch screen bug! It's because of the different bases I presume...
I don't use toolkits to flash boot.img or anything... I do it manually via fastboot.. The toolkit also does the same thing but it just doesn't show you (does it in background)...

vin4yak said:
Use RD-MIUI from xda! Don't use the one from the other site... many people have found this touch screen bug! It's because of the different bases I presume...
I don't use toolkits to flash boot.img or anything... I do it manually via fastboot.. The toolkit also does the same thing but it just doesn't show you (does it in background)...
Click to expand...
Click to collapse
So i flashed XM kernel and modules in it. Screen seems to be working.

redh4t said:
So i flashed XM kernel and modules in it. Screen seems to be working.
Click to expand...
Click to collapse
Great! Enjou MIUI! :good:

vin4yak said:
Great! Enjou MIUI! :good:
Click to expand...
Click to collapse
Thank you. +1 for you guys.

Mr Hofs said:
Nothing probably. The newer official bases have updated touchdrivers .....
Flash this one and try again
http://db.tt/H7m4ffIP
Click to expand...
Click to collapse
Hello I have the same issue but there no file anymore when I click on link above.
Could you tell me what the file you gave to help that person was ?

layoup said:
Hello I have the same issue but there no file anymore when I click on link above.
Could you tell me what the file you gave to help that person was ?
Click to expand...
Click to collapse
http://db.tt/SPXdFfPw
This one.....

Mr Hofs said:
http://db.tt/SPXdFfPw
This one.....
Click to expand...
Click to collapse
Thanks a lot
It works

Mr Hofs said:
http://db.tt/SPXdFfPw
This one.....
Click to expand...
Click to collapse
EDITED: I found my nand in CWM backup.

[Q] flashing the kernel seperate?

Im am the only one or have other phones the same problems?
I use an HTC one x and have to flash the kernel seperate. is there anyone with the same isue?
any tipps for flashing without an PC only with recovery?

cyrok said:
Im am the only one or have other phones the same problems?
I use an HTC one x and have to flash the kernel seperate. is there anyone with the same isue?
any tipps for flashing without an PC only with recovery?
Click to expand...
Click to collapse
My last HTC device was a Desire HD, but I imagine that the newer devices have the same approach. To flash a kernel, you need to use both recovery and a PC, first to flash the boot.img with fastboot from the PC, and then flash the .zip from the recovery.

cyrok said:
Im am the only one or have other phones the same problems?
I use an HTC one x and have to flash the kernel seperate. is there anyone with the same isue?
any tipps for flashing without an PC only with recovery?
Click to expand...
Click to collapse
Yes use kernel lighter from original android section by @Thunder07 thanks to him we don't need S-OFF:victory:

Thant said:
Yes use kernel lighter from original android section by @Thunder07 thanks to him we don't need S-OFF:victory:
Click to expand...
Click to collapse
what did the s-off mean? i saw it in the original recovery, but dont understand the sense
sorry for my bad english

cyrok said:
what did the s-off mean? i saw it in the original recovery, but dont understand the sense
sorry for my bad english
Click to expand...
Click to collapse
S-OFF give you possibility to flash boot.img withoet PC, the boot.img is includet in the module.zip with script to flash it from recovery, and many other things

Thant said:
S-OFF give you possibility to flash boot.img withoet PC, the boot.img is includet in the module.zip with script to flash it from recovery, and many other things
Click to expand...
Click to collapse
means i can flash a zip (wich contains the boot.img) without a PC?

cyrok said:
means i can flash a zip (wich contains the boot.img) without a PC?
Click to expand...
Click to collapse
yes and roms too but no S-OFF for HOX. Are you read for the kernel lighter?

Thant said:
yes and roms too but no S-OFF for HOX. Are you read for the kernel lighter?
Click to expand...
Click to collapse
how did you mean that?

cyrok said:
how did you mean that?
Click to expand...
Click to collapse
what what I mean??? I mean you can flash roms and kernels with kernel lighter withowt PC only one time you must to flash the KLboot.img and other things read in the thread for kernel lighter

I use an android phone with twrp custom recovery and when i flashed a rom before i restarted my phone i wipe cache and dalvik cache then i flash the kernel zip separately from the rom and then restart phone. Make a nandroid backup before doing any thing like this and you can backup your stock kernel if you haven't changed it yet. Flashify for root users, app can backup your current kernel and current recovery. I only flash roms and kernels through recovery. I have used that app to flash my recovery but some people have bricked their devices using it. Soft bricked i think

ryan012 said:
I use an android phone with twrp custom recovery and when i flashed a rom before i restarted my phone i wipe cache and dalvik cache then i flash the kernel zip sererately from the rom and then restart phone. Make a nandroid backup before doing any thing like this and you can backup your stock kernel if you haven't changed it yet. Flashify for root users, app can backup your current kernel and current recovery. I only flash roms and kernels through recovery. I have used that app to flash my recovery but some people have bricked their devices using it. Soft bricked i think
Click to expand...
Click to collapse
thats my rom ;P
http://forum.pac-rom.com/Thread-ROM-UNOFFICIAL-KitKat-4-4-4-ENDEAVORU-PAC-ROM-KK-RC-3
i think i do it on the classic way, like you say think that wasnt a onetime flashing so i like to be on the safe side

cyrok said:
thats my rom ;P
http://forum.pac-rom.com/Thread-ROM-UNOFFICIAL-KitKat-4-4-4-ENDEAVORU-PAC-ROM-KK-RC-3
i think i do it on the classic way, like you say think that wasnt a onetime flashing so i like to be on the safe side
Click to expand...
Click to collapse
What is it you were doing ? Were you trying to flash them both at same time from a computer instead of on the recovery ?

ryan012 said:
What is it you were doing ? Were you trying to flash them both at same time from a computer instead of on the recovery ?
Click to expand...
Click to collapse
naaa... first flash the extractet boot.img with his tool http://forum.xda-developers.com/showthread.php?t=1952426
and then i flash the full zip with my recovery. i use philz touch 6 recovery for the hox.
i had made a flashable zip with all my apps. made with ZIPme https://play.google.com/store/apps/details?id=zip.me&hl=de
works great ^^
i think its easyer than make the whole s-off thing

cyrok said:
naaa... first flash the extractet boot.img with his tool http://forum.xda-developers.com/showthread.php?t=1952426
and then i flash the full zip with my recovery. i use philz touch 6 recovery for the hox.
i had made a flashable zip with all my apps. made with ZIPme https://play.google.com/store/apps/details?id=zip.me&hl=de
works great ^^
i think its easyer than make the whole s-off thing
Click to expand...
Click to collapse
with Kernel lighter you install one time the KLZeusBeta8.img with the pc then when you go in recovery just go to flash zip from file choice Flash AromaFM-KL.zip then choice your rom and will be installed on the end choice the boot.img from rom.zip the apps will ask you to choice the boot.img and give you automatik the boot.img in the rom.zip and you are ready to go you can change your rom every thime when you want and flash kernels any time without PC

Thank you. I give it a try you description is easyer than the one from the thread

Thant said:
S-OFF give you possibility to flash boot.img withoet PC, the boot.img is includet in the module.zip with script to flash it from recovery, and many other things
Click to expand...
Click to collapse
cyrok said:
how did you mean that?
Click to expand...
Click to collapse
just keep in mind that there is a small bug in KL-Aroma which ill fix in a week, after my exams.
but you can bypass it by running this commands with adb
Code:
adb remount
adb shell mkdir /system/boot/
adb shell mkdir /data/boot/
adb shell mkdir /sdcard/boot/