So im trying to flash the New FL16 md5 to my phone and i open Odin up and click the checkbox next to PDA and i go to the extracted md5 and its not there.
I have tried this on Odin 1.85 and Odin3
I have downloaded the .7z and extracted the file and odin cant find it
IamFlynn said:
So im trying to flash the New FL16 md5 to my phone and i open Odin up and click the checkbox next to PDA and i go to the extracted md5 and its not there.
I have tried this on Odin 1.85 and Odin3
I have downloaded the .7z and extracted the file and odin cant find it
Click to expand...
Click to collapse
Did you download the tar file or the odin one click?
Sent from my SPH-D710 using Tapatalk 2
Related
I downloaded this through the xda link Epic4GTouch/kernel/ZedomaxEpicTouchKernel/SPH-D710_Zedomax_EpicTouchKernel-v6.02beta.zip but when I try to flash through odin it doesnt see it as a .tar file??? Am i missing something here?
Because it's a zip file. It's flashable only thru CWM. Odin requires .tar files.
I want to flash a modem with mobile odin since I am not using a repack kernel. I didn't find a tar file but I found a zip file. Can I extract the modem.bin and then in mobile odin lite select modem and browse to where the modem.bin is and select it and then flash? Or does it have to be a tar file? I am new to mobile odin but I really like it.
Well normally you would pull the modem.bin file out of the ZIP and flash it, but it won't work on our phone. I haven't been able to get a single modem.bin file or any of Calk's modem TAR files to flash in Mobile Odin. It just goes through the motions. Supposedly it will flash the modem from a full TAR image though.
Sent from my SPH-D710 using Tapatalk
Thanks for the info. I guess I will Odin the repack with recovery and flash the modem and flash the stock kernel back then.
ElAguila said:
Thanks for the info. I guess I will Odin the repack with recovery and flash the modem and flash the stock kernel back then.
Click to expand...
Click to collapse
If for some reason you don't like the repacks, you can also install the stock FB27 zImage and it should flash the modems (they ignore signature failures in FB27 stock recovery) Same number of steps as installing a CWM repack except you will always be running pure stock software (I figure there must be a reason you haven't installed a CWM repack already)
How to ? Mobile Odin cannot recognize the modem.bin file, it's only recognize the .tar file
supercjlee said:
How to ? Mobile Odin cannot recognize the modem.bin file, it's only recognize the .tar file
Click to expand...
Click to collapse
Though I don't use it, I believe Mobile ODIN recognizes modem.bin and tar. It just doesn't flash modem.bin on CDMA systems.
Flashing the modem with the actual odin does not raise any flash counters or cause any yellow triangles. Why not just do it thru odin?
im0rtalz said:
Flashing the modem with the actual odin does not raise any flash counters or cause any yellow triangles. Why not just do it thru odin?
Click to expand...
Click to collapse
Convenience mainly.
Sent from my SPH-D710 using Tapatalk 2
I just got my Galaxy SII for Sprint and I've rooted it but cant get CWM to install. I've used odin V1.85, downloaded the tar file, but when I hit start it says the file is no good. Anything else to do?
roughneck224 said:
I just got my Galaxy SII for Sprint and I've rooted it but cant get CWM to install. I've used odin V1.85, downloaded the tar file, but when I hit start it says the file is no good. Anything else to do?
Click to expand...
Click to collapse
Did you download the file from here? [KERNELS][CWM][ODIN] Kernel Repository - Download Them All Here
While Downloading Stock ROM From SamMobile For Samsung Galaxy Gio GT-S5660, I Came Across The Following Instructions To Install The Stock ROM:
Instructions:
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Click to expand...
Click to collapse
I Just Wanted To Ask IF It was Possible To Flash Gio With The New ODIN (v3.09)?
The newest Odin is 4.42 and we use it already for more than a year, so Odin 3.09 is even older
Just use 4.42 and you'll be fine.
I downloaded a firmware from https://updato.com/firmware-archive-select-model?record=DC84818B1FD311E6949E0CC47A44B7B2
How do I flash this file to odin? Which version of odin should I use?
In odin there are four boxes: bootloader, pda, phone and csc, but the file I downloaded is only a single file called N5100XXDNJ2_N5100OLBDNJ2_N5100DXDNG1_HOME.tar.md5
In which box do I put this file?
I am using GT N5100
TrojanHorses said:
I downloaded a firmware from https://updato.com/firmware-archive-select-model?record=DC84818B1FD311E6949E0CC47A44B7B2
How do I flash this file to odin? Which version of odin should I use?
In odin there are four boxes: bootloader, pda, phone and csc, but the file I downloaded is only a single file called N5100XXDNJ2_N5100OLBDNJ2_N5100DXDNG1_HOME.tar.md5
In which box do I put this file?
I am using GT N5100
Click to expand...
Click to collapse
Select AP box in Odin3