I downloaded a firmware from https://updato.com/firmware-archive-select-model?record=DC84818B1FD311E6949E0CC47A44B7B2
How do I flash this file to odin? Which version of odin should I use?
In odin there are four boxes: bootloader, pda, phone and csc, but the file I downloaded is only a single file called N5100XXDNJ2_N5100OLBDNJ2_N5100DXDNG1_HOME.tar.md5
In which box do I put this file?
I am using GT N5100
TrojanHorses said:
I downloaded a firmware from https://updato.com/firmware-archive-select-model?record=DC84818B1FD311E6949E0CC47A44B7B2
How do I flash this file to odin? Which version of odin should I use?
In odin there are four boxes: bootloader, pda, phone and csc, but the file I downloaded is only a single file called N5100XXDNJ2_N5100OLBDNJ2_N5100DXDNG1_HOME.tar.md5
In which box do I put this file?
I am using GT N5100
Click to expand...
Click to collapse
Select AP box in Odin3
Related
So im trying to flash the New FL16 md5 to my phone and i open Odin up and click the checkbox next to PDA and i go to the extracted md5 and its not there.
I have tried this on Odin 1.85 and Odin3
I have downloaded the .7z and extracted the file and odin cant find it
IamFlynn said:
So im trying to flash the New FL16 md5 to my phone and i open Odin up and click the checkbox next to PDA and i go to the extracted md5 and its not there.
I have tried this on Odin 1.85 and Odin3
I have downloaded the .7z and extracted the file and odin cant find it
Click to expand...
Click to collapse
Did you download the tar file or the odin one click?
Sent from my SPH-D710 using Tapatalk 2
Can someone give me a link for MK2 Modem/Radio instructions via Odin (through mobile or computer odin) and the link for the compatible MK2 file itself ?
re: mk2 modem
xperia_88 said:
Can someone give me a link for MK2 Modem/Radio instructions via Odin (through mobile or computer odin) and the link for the compatible MK2 file itself ?
Click to expand...
Click to collapse
Here is the direct download link for the MK2 modem/radio (modem.bin):
http://download1276.mediafire.com/dbomd3ltqngg/1gsjokadys4l89x/modem.bin
When flashing using Odin be sure to use the PHONE slot for the modem.bin
or odin will not recognize it. You can also flash it using mobile odin.
Good luck!
Can I use this on wicked v7 4.2.2 without problems how do I flash it on mobile odin
Sent from my SGH-M919 using xda app-developers app
Is this Knox-free version?
Paulenski said:
Is this Knox-free version?
Click to expand...
Click to collapse
Thus is just a modem/radio. No Knox if Odin on its own. It's the bootloader that has Knox.
☞ Sent from here☜???
re: modem bin
13silencer13 said:
Can I use this on wicked v7 4.2.2 without problems how do I flash it on mobile odin
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Yes you can use it on Wicked 4.2.2 custom rom.
And this modem.bin will NOT effect the KNOX status of your phone.
Here are the instructions for mobile odin.
-Flashing with Mobile ODIN is easy. You start by starting the app and the app will check your system has everything it needs to continue (like root). It may need to download an additional package, so it is advised you have Wi-Fi available.
Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file - Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported.
From the desktop ODIN you maybe used to "PDA", "PHONE", and "CSC" buttons. All three of these buttons have been replaced by the "Open file ..." button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing.
Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.
Now that we are all done selecting partitions and configuring EverRoot, we continue to "Flash firmware". Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.
Good luck!
please see attachment , message appears after flashing i747UCUEMJB_ATTEMJB 4.3 on phone via ODIN
IMEi and baseband in unknown or Null
what to do friends?
What options did you select when you flashed in Odin? You flashed the file in the PDA section of Odin 3.07?
audit13 said:
What options did you select when you flashed in Odin? You flashed the file in the PDA section of Odin 3.07?
Click to expand...
Click to collapse
yes , PDA
How to install new stock .tar file? ODIN 3.12 says "Download BL + AP + CP + HOME_CSC
I did download G935PVPS4APK1_SPT4APK1_SPR_Sprint_USA_6.0.1 which does contain files that start with AP_, BL_, CP_, CSC_SPT, HOME_CSC_SPT.
These match with the ODIN sections which I was previously advised never to flash.
What are each of these? Should I actually flash them? Should I flash them in a certain order? I always get fail when I try to install (may need to run as admin).
hammerchucker said:
I did download G935PVPS4APK1_SPT4APK1_SPR_Sprint_USA_6.0.1 which does contain files that start with AP_, BL_, CP_, CSC_SPT, HOME_CSC_SPT.
These match with the ODIN sections which I was previously advised never to flash.
What are each of these? Should I actually flash them? Should I flash them in a certain order? I always get fail when I try to install (may need to run as admin).
Click to expand...
Click to collapse
If your download is zipped, extract the tar.md5 file and load in AP slot.
You've downloaded a S7 Edge file but posted in Note 4 forum. Check your model number and make sure you're flashing the right stock tar. Note 4 has stock tar thread in general forum for Note 4.
Even the Sprint S7E uses a full stock tar.md5 file to flash in AP slot per Sammobile. The dialogue you're seeing in the newer Odin is used for other purposes like recovering phone. Maybe other models use that or it's another option for flashing native csc on international phone but Sprint phones would normally use the full tar.md5 in AP slot.
Sent from my SM-N920P using Tapatalk
samep said:
If your download is zipped, extract the tar.md5 file and load in AP slot.
You've downloaded a S7 Edge file but posted in Note 4 forum. Check your model number and make sure you're flashing the right stock tar. Note 4 has stock tar thread in general forum for Note 4.
Even the Sprint S7E uses a full stock tar.md5 file to flash in AP slot per Sammobile. The dialogue you're seeing in the newer Odin is used for other purposes like recovering phone. Maybe other models use that or it's another option for flashing native csc on international phone but Sprint phones would normally use the full tar.md5 in AP slot.
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
Thanks for the response and catch that this is S7 ROM. It never flashed (failed in ODIN) and I ended up d/l the Sprint N4 PK1 which led to a successful Note 7 install.
Hello, I am using Odin v3.13.3
My phone was running with latest Ukraine firmware which is:
A705FNXXU3ASJ3 ap
A705FNXXU3ASJ3 bl
A705FNXXU3ASH1 cp
A705FNOXM3ASJ3 csc
Today I wanted to format it and decided to do it via Odin. But it stuck at system.img. So I tried to flash the firmware which was just before the newest one. And Odin flashed it with success.
I also had the same problem when I tried to install that older firmware a few months ago till I found Odin with version 3.13.3
So, What do I need to do, I couldn't find a newer Odin. Is there any other problem. How can I flash the latest firmware via Odin?
Thanks ^^
where is home csc,there is only 4 but must have 5 to flash...
imenko79 said:
where is home csc,there is only 4 but must have 5 to flash...
Click to expand...
Click to collapse
It's same as csc, if you flash home csc it doesn't wipe. If you flash only CSC, it wipes your phone. You select one of them, you can't flash both.
And as you see, I succesfully flashed an older firmware. The problem is that odin can't flash the newest firmware.
y.erenbektas said:
Hello, I am using Odin v3.13.3
My phone was running with latest Ukraine firmware which is:
A705FNXXU3ASJ3 ap
A705FNXXU3ASJ3 bl
A705FNXXU3ASH1 cp
A705FNOXM3ASJ3 csc
Today I wanted to format it and decided to do it via Odin. But it stuck at system.img. So I tried to flash the firmware which was just before the newest one. And Odin flashed it with success.
I also had the same problem when I tried to install that older firmware a few months ago till I found Odin with version 3.13.3
So, What do I need to do, I couldn't find a newer Odin. Is there any other problem. How can I flash the latest firmware via Odin?
Thanks ^^
Click to expand...
Click to collapse
Try going into developer options and enabling OEM Unlock then flashyour desired CSC FW with Odin
dezborders said:
Try going into developer options and enabling OEM Unlock then flashyour desired CSC FW with Odin
Click to expand...
Click to collapse
I'll give this next weekend. Thanks ^^