I want to flash a modem with mobile odin since I am not using a repack kernel. I didn't find a tar file but I found a zip file. Can I extract the modem.bin and then in mobile odin lite select modem and browse to where the modem.bin is and select it and then flash? Or does it have to be a tar file? I am new to mobile odin but I really like it.
Well normally you would pull the modem.bin file out of the ZIP and flash it, but it won't work on our phone. I haven't been able to get a single modem.bin file or any of Calk's modem TAR files to flash in Mobile Odin. It just goes through the motions. Supposedly it will flash the modem from a full TAR image though.
Sent from my SPH-D710 using Tapatalk
Thanks for the info. I guess I will Odin the repack with recovery and flash the modem and flash the stock kernel back then.
ElAguila said:
Thanks for the info. I guess I will Odin the repack with recovery and flash the modem and flash the stock kernel back then.
Click to expand...
Click to collapse
If for some reason you don't like the repacks, you can also install the stock FB27 zImage and it should flash the modems (they ignore signature failures in FB27 stock recovery) Same number of steps as installing a CWM repack except you will always be running pure stock software (I figure there must be a reason you haven't installed a CWM repack already)
How to ? Mobile Odin cannot recognize the modem.bin file, it's only recognize the .tar file
supercjlee said:
How to ? Mobile Odin cannot recognize the modem.bin file, it's only recognize the .tar file
Click to expand...
Click to collapse
Though I don't use it, I believe Mobile ODIN recognizes modem.bin and tar. It just doesn't flash modem.bin on CDMA systems.
Flashing the modem with the actual odin does not raise any flash counters or cause any yellow triangles. Why not just do it thru odin?
im0rtalz said:
Flashing the modem with the actual odin does not raise any flash counters or cause any yellow triangles. Why not just do it thru odin?
Click to expand...
Click to collapse
Convenience mainly.
Sent from my SPH-D710 using Tapatalk 2
Related
I know to install the modem I just pulled the .bin file out of zip and put in phone slot of Odin to install it. Can I do the same with zip of rom and kernel or what parts do I put and where in Odin instead of doing the whole Odin back to gingerbread base CWM and flashing it that way?
Colt10mm said:
I know to install the modem I just pulled the .bin file out of zip and put in phone slot of Odin to install it. Can I do the same with zip of rom and kernel or what parts do I put and where in Odin instead of doing the whole Odin back to gingerbread base CWM and flashing it that way?
Click to expand...
Click to collapse
No way to do that ....only custom ROM i have seen as a Odin tar was a cm9 for international galaxy s2
Sent from my SPH-D710 using Tapatalk 2
Thanks for the info..... was just hoping!
In order to save my phone, I need the modem flash for file t889 that can be used with Odin and not CWM. Please advise.
Unzip CWM version , you will have Zimage ( Odin file). If I'm not wrong.
simplelife said:
Unzip CWM version , you will have Zimage ( Odin file). If I'm not wrong.
Click to expand...
Click to collapse
thanks for the suggestion. However, in the zip file there's the modem.bin, and the flash_image file and a folder with other stuff. I am uncertain which one to extract. (yes, I am googling this as I ask.)
the modem.bin file is the one you need. would you mind posting a link to the CWM zip you have of the modem? been looking for it..
My experience with Odin and modem cross-flashing is that is fails before writing anything. (T889-LJ1 on T889, T889V-LJ4 on T889V and so on should work. Other partitions made with this method work flawlessly, so I'm guessing there's an additional check in the bootloader for modem images.)
Anyway, here goes. Those files were made by extracting from their respective Odin images, from Sammobile and tarring with the Cygwin tar binary.
SGH-T889V T889VVLALJ4 Odin-flashable modem image: http://www.mediafire.com/?1ielxoreoyc4nbm
Goodbye,
Darkshado
Can dis modem work with t889UVUCMK7 ? I need it badly anybody tell ? Thanks
damabib said:
Can dis modem work with t889UVUCMK7 ? I need it badly anybody tell ? Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2564430
mk7 modem
So im trying to flash the New FL16 md5 to my phone and i open Odin up and click the checkbox next to PDA and i go to the extracted md5 and its not there.
I have tried this on Odin 1.85 and Odin3
I have downloaded the .7z and extracted the file and odin cant find it
IamFlynn said:
So im trying to flash the New FL16 md5 to my phone and i open Odin up and click the checkbox next to PDA and i go to the extracted md5 and its not there.
I have tried this on Odin 1.85 and Odin3
I have downloaded the .7z and extracted the file and odin cant find it
Click to expand...
Click to collapse
Did you download the tar file or the odin one click?
Sent from my SPH-D710 using Tapatalk 2
Can someone give me a link for MK2 Modem/Radio instructions via Odin (through mobile or computer odin) and the link for the compatible MK2 file itself ?
re: mk2 modem
xperia_88 said:
Can someone give me a link for MK2 Modem/Radio instructions via Odin (through mobile or computer odin) and the link for the compatible MK2 file itself ?
Click to expand...
Click to collapse
Here is the direct download link for the MK2 modem/radio (modem.bin):
http://download1276.mediafire.com/dbomd3ltqngg/1gsjokadys4l89x/modem.bin
When flashing using Odin be sure to use the PHONE slot for the modem.bin
or odin will not recognize it. You can also flash it using mobile odin.
Good luck!
Can I use this on wicked v7 4.2.2 without problems how do I flash it on mobile odin
Sent from my SGH-M919 using xda app-developers app
Is this Knox-free version?
Paulenski said:
Is this Knox-free version?
Click to expand...
Click to collapse
Thus is just a modem/radio. No Knox if Odin on its own. It's the bootloader that has Knox.
☞ Sent from here☜???
re: modem bin
13silencer13 said:
Can I use this on wicked v7 4.2.2 without problems how do I flash it on mobile odin
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Yes you can use it on Wicked 4.2.2 custom rom.
And this modem.bin will NOT effect the KNOX status of your phone.
Here are the instructions for mobile odin.
-Flashing with Mobile ODIN is easy. You start by starting the app and the app will check your system has everything it needs to continue (like root). It may need to download an additional package, so it is advised you have Wi-Fi available.
Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file - Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported.
From the desktop ODIN you maybe used to "PDA", "PHONE", and "CSC" buttons. All three of these buttons have been replaced by the "Open file ..." button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing.
Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.
Now that we are all done selecting partitions and configuring EverRoot, we continue to "Flash firmware". Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.
Good luck!
I have the latest full stock base for the Galaxy Tab Pro 12.2 Wifi (SM-T900) and want to make a bootloader package that can be flashed in ODIN.
Inside of the full stock tar file is:
boot.img
recovery. img
system. img
cache.img
hidden.img
sboot.bin
Which is the bootloader, and what do I need to do to the file, if anything, so that it can be flashed individually in ODIN? Also, should there be a modem file? Alternatively, is it possible to create a zip of these things (bootloader, modem) that's flashable in TWRP?
Thanks in advance for any help.
trav06 said:
I have the latest full stock base for the Galaxy Tab Pro 12.2 Wifi (SM-T900) and want to make a bootloader package that can be flashed in ODIN.
Inside of the full stock tar file is:
boot.img
recovery. img
system. img
cache.img
hidden.img
sboot.bin
Which is the bootloader, and what do I need to do to the file, if anything, so that it can be flashed individually in ODIN? Also, should there be a modem file? Alternatively, is it possible to create a zip of these things (bootloader, modem) that's flashable in TWRP?
Thanks in advance for any help.
Click to expand...
Click to collapse
I'm not quite sure which one is bootloader. Sometimes you can't flash each one individual ly with odin(ex like creating an odin tar that just has system). Modem files are only on lte devices. Most times you don't need them for custom roms. Anyway, you can extract each IMG and create and tar the IMG up. There are a few commands and guides to tar something and add md5 to them.
As for a flash able zip yes and no. Bootloader can't be flashed in twrp most times since I have never seen anything like that. You usually have to flash bootloader with odin. Modems don't need to be flashed since twrp doesn't mess with it most times. But you can create an flash able zip of kernel, recovery and I'm unsure of system.img(may need to extract or adjust updater scipt. Though I dont fully know).
Usually the twrp flashable in ArchiKitchen so it can help with the updater scipt stuffs. Just don't add any options such as root and busybox to it. I've never seen a flashable bootloader in twrp so it's highly unlikely of it being possible.
Hope this helps!
trav06 said:
I have the latest full stock base for the Galaxy Tab Pro 12.2 Wifi (SM-T900) and want to make a bootloader package that can be flashed in ODIN.
Inside of the full stock tar file is:
boot.img
recovery. img
system. img
cache.img
hidden.img
sboot.bin
Which is the bootloader, and what do I need to do to the file, if anything, so that it can be flashed individually in ODIN? Also, should there be a modem file? Alternatively, is it possible to create a zip of these things (bootloader, modem) that's flashable in TWRP?
Thanks in advance for any help.
Click to expand...
Click to collapse
Hi
The bootloader tar package for flashing in ODIN:
1) boot.img
2) sboot.bin
Use 'Total Commander' (google it) to make tar package (bootloader).
Any luck with the port?
shayind4